conduwuit/DEPLOY.md

Deploying Conduit

Please note that this documentation is not fully representative of conduwuit at the moment. Assume majority of it is outdated.

Getting help

If you run into any problems while setting up conduwuit, ask us in #conduwuit:puppygock.gay or open an issue on GitHub.

Installing conduwuit

Although you might be able to compile conduwuit for Windows, we only support running it on a Linux server. We therefore only offer Linux binaries.

conduwuit does not offer prebuilt binaries for now. Building it yourself is the only supported method.

# Debian
$ sudo apt install libclang-dev build-essential

# RHEL
$ sudo dnf install clang

Then, cd into the source tree of conduit-next and run:

$ cargo build --release

If you want to cross compile Conduit to another architecture, read the guide below.

Cross compilation

As easiest way to compile conduit for another platform cross-rs is recommended, so install it first.

In order to use RockDB as storage backend append -latomic to linker flags.

For example, to build a binary for Raspberry Pi Zero W (ARMv6) you need arm-unknown-linux-gnueabihf as compilation target.

git clone https://gitlab.com/famedly/conduit.git
cd conduit
export RUSTFLAGS='-C link-arg=-lgcc -Clink-arg=-latomic -Clink-arg=-static-libgcc'
cross build --release --no-default-features --features conduit_bin,backend_rocksdb --target=arm-unknown-linux-gnueabihf

Adding a Conduit user

While Conduit can run as any user it is usually better to use dedicated users for different services. This also allows you to make sure that the file permissions are correctly set up.

In Debian or RHEL, you can use this command to create a Conduit user:

sudo adduser --system conduit --group --disabled-login --no-create-home

Forwarding ports in the firewall or the router

Conduit uses the ports 443 and 8448 both of which need to be open in the firewall.

If Conduit runs behind a router or in a container and has a different public IP address than the host system these public ports need to be forwarded directly or indirectly to the port mentioned in the config.

Optional: Avoid port 8448

If Conduit runs behind Cloudflare reverse proxy, which doesn't support port 8448 on free plans, delegation can be set up to have federation traffic routed to port 443:

# .well-known delegation on Apache
<Files "/.well-known/matrix/server">
    ErrorDocument 200 '{"m.server": "your.server.name:443"}'
    Header always set Content-Type application/json
    Header always set Access-Control-Allow-Origin *
</Files>

SRV DNS record delegation is also possible.

Setting up a systemd service

Now we'll set up a systemd service for Conduit, so it's easy to start/stop Conduit and set it to autostart when your server reboots. Simply paste the default systemd service you can find below into /etc/systemd/system/conduit.service.

[Unit]
Description=Conduit Matrix Server
After=network.target

[Service]
Environment="CONDUIT_CONFIG=/etc/matrix-conduit/conduit.toml"
User=conduit
Group=conduit
RuntimeDirectory=conduit
RuntimeDirectoryMode=0750
Restart=always
ExecStart=/usr/local/bin/matrix-conduit

[Install]
WantedBy=multi-user.target

Finally, run

$ sudo systemctl daemon-reload

Creating the Conduit configuration file

Now we need to create the Conduit's config file in /etc/conduwuit/conduwuit.toml. Paste this in and take a moment to read it. You need to change at least the server name.
You can also choose to use a different database backend, but right now only rocksdb and sqlite are recommended.

See the following example config at conduwuit-example.toml

Setting the correct file permissions

As we are using a Conduit specific user we need to allow it to read the config. To do that you can run this command on Debian or RHEL:

sudo chown -R root:root /etc/matrix-conduit
sudo chmod 755 /etc/matrix-conduit

If you use the default database path you also need to run this:

sudo mkdir -p /var/lib/matrix-conduit/
sudo chown -R conduit:conduit /var/lib/matrix-conduit/
sudo chmod 700 /var/lib/matrix-conduit/

Setting up the Reverse Proxy

This depends on whether you use Apache, Caddy, Nginx or another web server.

Apache

Create /etc/apache2/sites-enabled/050-conduit.conf and copy-and-paste this:

# Requires mod_proxy and mod_proxy_http
#
# On Apache instance compiled from source,
# paste into httpd-ssl.conf or httpd.conf

Listen 8448

<VirtualHost *:443 *:8448>

ServerName your.server.name # EDIT THIS

AllowEncodedSlashes NoDecode

# TCP
ProxyPass /_matrix/ http://127.0.0.1:6167/_matrix/ timeout=300 nocanon
ProxyPassReverse /_matrix/ http://127.0.0.1:6167/_matrix/

# UNIX socket
#ProxyPass /_matrix/ unix:/run/conduit/conduit.sock|http://127.0.0.1:6167/_matrix/ nocanon
#ProxyPassReverse /_matrix/ unix:/run/conduit/conduit.sock|http://127.0.0.1:6167/_matrix/

</VirtualHost>

You need to make some edits again. When you are done, run

# Debian
$ sudo systemctl reload apache2

# Installed from source
$ sudo apachectl -k graceful

Caddy

Create /etc/caddy/conf.d/conduit_caddyfile and enter this (substitute for your server name).

your.server.name, your.server.name:8448 {
        # TCP
        reverse_proxy /_matrix/* 127.0.0.1:6167

        # UNIX socket
        #reverse_proxy /_matrix/* unix//run/conduit/conduit.sock
}

That's it! Just start or enable the service and you're set.

$ sudo systemctl enable caddy

Nginx

If you use Nginx and not Apache, add the following server section inside the http section of /etc/nginx/nginx.conf

server {
    listen 443 ssl http2;
    listen [::]:443 ssl http2;
    listen 8448 ssl http2;
    listen [::]:8448 ssl http2;
    server_name your.server.name; # EDIT THIS
    merge_slashes off;

    # Nginx defaults to only allow 1MB uploads
    # Increase this to allow posting large files such as videos
    client_max_body_size 20M;

    # UNIX socket
    #upstream backend {
    #    server unix:/run/conduit/conduit.sock;
    #}

    location /_matrix/ {
        # TCP
        proxy_pass http://127.0.0.1:6167$request_uri;

        # UNIX socket
        #proxy_pass http://backend;

        proxy_set_header Host $http_host;
        proxy_buffering off;
        proxy_read_timeout 5m;
    }

    ssl_certificate /etc/letsencrypt/live/your.server.name/fullchain.pem; # EDIT THIS
    ssl_certificate_key /etc/letsencrypt/live/your.server.name/privkey.pem; # EDIT THIS
    ssl_trusted_certificate /etc/letsencrypt/live/your.server.name/chain.pem; # EDIT THIS
    include /etc/letsencrypt/options-ssl-nginx.conf;
}

You need to make some edits again. When you are done, run

$ sudo systemctl reload nginx

SSL Certificate

If you chose Caddy as your web proxy SSL certificates are handled automatically and you can skip this step.

The easiest way to get an SSL certificate, if you don't have one already, is to install certbot and run this:

# To use ECC for the private key, 
# paste into /etc/letsencrypt/cli.ini:
# key-type = ecdsa
# elliptic-curve = secp384r1

$ sudo certbot -d your.server.name

Automated renewal is usually preconfigured.

If using Cloudflare, configure instead the edge and origin certificates in dashboard. In case you’re already running a website on the same Apache server, you can just copy-and-paste the SSL configuration from your main virtual host on port 443 into the above-mentioned vhost.

You're done!

Now you can start Conduit with:

$ sudo systemctl start conduit

Set it to start automatically when your system boots with:

$ sudo systemctl enable conduit

How do I know it works?

You can open https://app.element.io, enter your homeserver and try to register.

You can also use these commands as a quick health check.

$ curl https://your.server.name/_matrix/client/versions

# If using port 8448
$ curl https://your.server.name:8448/_matrix/client/versions

• To check if your server can talk with other homeservers, you can use the Matrix Federation Tester. If you can register but cannot join federated rooms check your config again and also check if the port 8448 is open and forwarded correctly.

What's next?

Audio/Video calls

For Audio/Video call functionality see the TURN Guide.

Appservices

If you want to set up an appservice, take a look at the Appservice Guide.