1150 lines
51 KiB
YAML
1150 lines
51 KiB
YAML
# Copyright (c) HashiCorp, Inc.
|
|
# SPDX-License-Identifier: MPL-2.0
|
|
|
|
# Cassandra storage config YAML
|
|
|
|
# NOTE:
|
|
# See http://wiki.apache.org/cassandra/StorageConfiguration for
|
|
# full explanations of configuration directives
|
|
# /NOTE
|
|
|
|
# The name of the cluster. This is mainly used to prevent machines in
|
|
# one logical cluster from joining another.
|
|
cluster_name: 'Test Cluster'
|
|
|
|
# This defines the number of tokens randomly assigned to this node on the ring
|
|
# The more tokens, relative to other nodes, the larger the proportion of data
|
|
# that this node will store. You probably want all nodes to have the same number
|
|
# of tokens assuming they have equal hardware capability.
|
|
#
|
|
# If you leave this unspecified, Cassandra will use the default of 1 token for legacy compatibility,
|
|
# and will use the initial_token as described below.
|
|
#
|
|
# Specifying initial_token will override this setting on the node's initial start,
|
|
# on subsequent starts, this setting will apply even if initial token is set.
|
|
#
|
|
# If you already have a cluster with 1 token per node, and wish to migrate to
|
|
# multiple tokens per node, see http://wiki.apache.org/cassandra/Operations
|
|
num_tokens: 256
|
|
|
|
# Triggers automatic allocation of num_tokens tokens for this node. The allocation
|
|
# algorithm attempts to choose tokens in a way that optimizes replicated load over
|
|
# the nodes in the datacenter for the replication strategy used by the specified
|
|
# keyspace.
|
|
#
|
|
# The load assigned to each node will be close to proportional to its number of
|
|
# vnodes.
|
|
#
|
|
# Only supported with the Murmur3Partitioner.
|
|
# allocate_tokens_for_keyspace: KEYSPACE
|
|
|
|
# initial_token allows you to specify tokens manually. While you can use it with
|
|
# vnodes (num_tokens > 1, above) -- in which case you should provide a
|
|
# comma-separated list -- it's primarily used when adding nodes to legacy clusters
|
|
# that do not have vnodes enabled.
|
|
# initial_token:
|
|
|
|
# See http://wiki.apache.org/cassandra/HintedHandoff
|
|
# May either be "true" or "false" to enable globally
|
|
hinted_handoff_enabled: true
|
|
|
|
# When hinted_handoff_enabled is true, a black list of data centers that will not
|
|
# perform hinted handoff
|
|
# hinted_handoff_disabled_datacenters:
|
|
# - DC1
|
|
# - DC2
|
|
|
|
# this defines the maximum amount of time a dead host will have hints
|
|
# generated. After it has been dead this long, new hints for it will not be
|
|
# created until it has been seen alive and gone down again.
|
|
max_hint_window_in_ms: 10800000 # 3 hours
|
|
|
|
# Maximum throttle in KBs per second, per delivery thread. This will be
|
|
# reduced proportionally to the number of nodes in the cluster. (If there
|
|
# are two nodes in the cluster, each delivery thread will use the maximum
|
|
# rate; if there are three, each will throttle to half of the maximum,
|
|
# since we expect two nodes to be delivering hints simultaneously.)
|
|
hinted_handoff_throttle_in_kb: 1024
|
|
|
|
# Number of threads with which to deliver hints;
|
|
# Consider increasing this number when you have multi-dc deployments, since
|
|
# cross-dc handoff tends to be slower
|
|
max_hints_delivery_threads: 2
|
|
|
|
# Directory where Cassandra should store hints.
|
|
# If not set, the default directory is $CASSANDRA_HOME/data/hints.
|
|
# hints_directory: /var/lib/cassandra/hints
|
|
|
|
# How often hints should be flushed from the internal buffers to disk.
|
|
# Will *not* trigger fsync.
|
|
hints_flush_period_in_ms: 10000
|
|
|
|
# Maximum size for a single hints file, in megabytes.
|
|
max_hints_file_size_in_mb: 128
|
|
|
|
# Compression to apply to the hint files. If omitted, hints files
|
|
# will be written uncompressed. LZ4, Snappy, and Deflate compressors
|
|
# are supported.
|
|
#hints_compression:
|
|
# - class_name: LZ4Compressor
|
|
# parameters:
|
|
# -
|
|
|
|
# Maximum throttle in KBs per second, total. This will be
|
|
# reduced proportionally to the number of nodes in the cluster.
|
|
batchlog_replay_throttle_in_kb: 1024
|
|
|
|
# Authentication backend, implementing IAuthenticator; used to identify users
|
|
# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthenticator,
|
|
# PasswordAuthenticator}.
|
|
#
|
|
# - AllowAllAuthenticator performs no checks - set it to disable authentication.
|
|
# - PasswordAuthenticator relies on username/password pairs to authenticate
|
|
# users. It keeps usernames and hashed passwords in system_auth.credentials table.
|
|
# Please increase system_auth keyspace replication factor if you use this authenticator.
|
|
# If using PasswordAuthenticator, CassandraRoleManager must also be used (see below)
|
|
authenticator: PasswordAuthenticator
|
|
|
|
# Authorization backend, implementing IAuthorizer; used to limit access/provide permissions
|
|
# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthorizer,
|
|
# CassandraAuthorizer}.
|
|
#
|
|
# - AllowAllAuthorizer allows any action to any user - set it to disable authorization.
|
|
# - CassandraAuthorizer stores permissions in system_auth.permissions table. Please
|
|
# increase system_auth keyspace replication factor if you use this authorizer.
|
|
authorizer: CassandraAuthorizer
|
|
|
|
# Part of the Authentication & Authorization backend, implementing IRoleManager; used
|
|
# to maintain grants and memberships between roles.
|
|
# Out of the box, Cassandra provides org.apache.cassandra.auth.CassandraRoleManager,
|
|
# which stores role information in the system_auth keyspace. Most functions of the
|
|
# IRoleManager require an authenticated login, so unless the configured IAuthenticator
|
|
# actually implements authentication, most of this functionality will be unavailable.
|
|
#
|
|
# - CassandraRoleManager stores role data in the system_auth keyspace. Please
|
|
# increase system_auth keyspace replication factor if you use this role manager.
|
|
role_manager: CassandraRoleManager
|
|
|
|
# Validity period for roles cache (fetching granted roles can be an expensive
|
|
# operation depending on the role manager, CassandraRoleManager is one example)
|
|
# Granted roles are cached for authenticated sessions in AuthenticatedUser and
|
|
# after the period specified here, become eligible for (async) reload.
|
|
# Defaults to 2000, set to 0 to disable caching entirely.
|
|
# Will be disabled automatically for AllowAllAuthenticator.
|
|
roles_validity_in_ms: 2000
|
|
|
|
# Refresh interval for roles cache (if enabled).
|
|
# After this interval, cache entries become eligible for refresh. Upon next
|
|
# access, an async reload is scheduled and the old value returned until it
|
|
# completes. If roles_validity_in_ms is non-zero, then this must be
|
|
# also.
|
|
# Defaults to the same value as roles_validity_in_ms.
|
|
# roles_update_interval_in_ms: 2000
|
|
|
|
# Validity period for permissions cache (fetching permissions can be an
|
|
# expensive operation depending on the authorizer, CassandraAuthorizer is
|
|
# one example). Defaults to 2000, set to 0 to disable.
|
|
# Will be disabled automatically for AllowAllAuthorizer.
|
|
permissions_validity_in_ms: 2000
|
|
|
|
# Refresh interval for permissions cache (if enabled).
|
|
# After this interval, cache entries become eligible for refresh. Upon next
|
|
# access, an async reload is scheduled and the old value returned until it
|
|
# completes. If permissions_validity_in_ms is non-zero, then this must be
|
|
# also.
|
|
# Defaults to the same value as permissions_validity_in_ms.
|
|
# permissions_update_interval_in_ms: 2000
|
|
|
|
# Validity period for credentials cache. This cache is tightly coupled to
|
|
# the provided PasswordAuthenticator implementation of IAuthenticator. If
|
|
# another IAuthenticator implementation is configured, this cache will not
|
|
# be automatically used and so the following settings will have no effect.
|
|
# Please note, credentials are cached in their encrypted form, so while
|
|
# activating this cache may reduce the number of queries made to the
|
|
# underlying table, it may not bring a significant reduction in the
|
|
# latency of individual authentication attempts.
|
|
# Defaults to 2000, set to 0 to disable credentials caching.
|
|
credentials_validity_in_ms: 2000
|
|
|
|
# Refresh interval for credentials cache (if enabled).
|
|
# After this interval, cache entries become eligible for refresh. Upon next
|
|
# access, an async reload is scheduled and the old value returned until it
|
|
# completes. If credentials_validity_in_ms is non-zero, then this must be
|
|
# also.
|
|
# Defaults to the same value as credentials_validity_in_ms.
|
|
# credentials_update_interval_in_ms: 2000
|
|
|
|
# The partitioner is responsible for distributing groups of rows (by
|
|
# partition key) across nodes in the cluster. You should leave this
|
|
# alone for new clusters. The partitioner can NOT be changed without
|
|
# reloading all data, so when upgrading you should set this to the
|
|
# same partitioner you were already using.
|
|
#
|
|
# Besides Murmur3Partitioner, partitioners included for backwards
|
|
# compatibility include RandomPartitioner, ByteOrderedPartitioner, and
|
|
# OrderPreservingPartitioner.
|
|
#
|
|
partitioner: org.apache.cassandra.dht.Murmur3Partitioner
|
|
|
|
# Directories where Cassandra should store data on disk. Cassandra
|
|
# will spread data evenly across them, subject to the granularity of
|
|
# the configured compaction strategy.
|
|
# If not set, the default directory is $CASSANDRA_HOME/data/data.
|
|
data_file_directories:
|
|
- /var/lib/cassandra/data
|
|
|
|
# commit log. when running on magnetic HDD, this should be a
|
|
# separate spindle than the data directories.
|
|
# If not set, the default directory is $CASSANDRA_HOME/data/commitlog.
|
|
commitlog_directory: /var/lib/cassandra/commitlog
|
|
|
|
# Enable / disable CDC functionality on a per-node basis. This modifies the logic used
|
|
# for write path allocation rejection (standard: never reject. cdc: reject Mutation
|
|
# containing a CDC-enabled table if at space limit in cdc_raw_directory).
|
|
cdc_enabled: false
|
|
|
|
# CommitLogSegments are moved to this directory on flush if cdc_enabled: true and the
|
|
# segment contains mutations for a CDC-enabled table. This should be placed on a
|
|
# separate spindle than the data directories. If not set, the default directory is
|
|
# $CASSANDRA_HOME/data/cdc_raw.
|
|
# cdc_raw_directory: /var/lib/cassandra/cdc_raw
|
|
|
|
# Policy for data disk failures:
|
|
#
|
|
# die
|
|
# shut down gossip and client transports and kill the JVM for any fs errors or
|
|
# single-sstable errors, so the node can be replaced.
|
|
#
|
|
# stop_paranoid
|
|
# shut down gossip and client transports even for single-sstable errors,
|
|
# kill the JVM for errors during startup.
|
|
#
|
|
# stop
|
|
# shut down gossip and client transports, leaving the node effectively dead, but
|
|
# can still be inspected via JMX, kill the JVM for errors during startup.
|
|
#
|
|
# best_effort
|
|
# stop using the failed disk and respond to requests based on
|
|
# remaining available sstables. This means you WILL see obsolete
|
|
# data at CL.ONE!
|
|
#
|
|
# ignore
|
|
# ignore fatal errors and let requests fail, as in pre-1.2 Cassandra
|
|
disk_failure_policy: stop
|
|
|
|
# Policy for commit disk failures:
|
|
#
|
|
# die
|
|
# shut down gossip and Thrift and kill the JVM, so the node can be replaced.
|
|
#
|
|
# stop
|
|
# shut down gossip and Thrift, leaving the node effectively dead, but
|
|
# can still be inspected via JMX.
|
|
#
|
|
# stop_commit
|
|
# shutdown the commit log, letting writes collect but
|
|
# continuing to service reads, as in pre-2.0.5 Cassandra
|
|
#
|
|
# ignore
|
|
# ignore fatal errors and let the batches fail
|
|
commit_failure_policy: stop
|
|
|
|
# Maximum size of the native protocol prepared statement cache
|
|
#
|
|
# Valid values are either "auto" (omitting the value) or a value greater 0.
|
|
#
|
|
# Note that specifying a too large value will result in long running GCs and possibly
|
|
# out-of-memory errors. Keep the value at a small fraction of the heap.
|
|
#
|
|
# If you constantly see "prepared statements discarded in the last minute because
|
|
# cache limit reached" messages, the first step is to investigate the root cause
|
|
# of these messages and check whether prepared statements are used correctly -
|
|
# i.e. use bind markers for variable parts.
|
|
#
|
|
# Do only change the default value, if you really have more prepared statements than
|
|
# fit in the cache. In most cases it is not necessary to change this value.
|
|
# Constantly re-preparing statements is a performance penalty.
|
|
#
|
|
# Default value ("auto") is 1/256th of the heap or 10MB, whichever is greater
|
|
prepared_statements_cache_size_mb:
|
|
|
|
# Maximum size of the Thrift prepared statement cache
|
|
#
|
|
# If you do not use Thrift at all, it is safe to leave this value at "auto".
|
|
#
|
|
# See description of 'prepared_statements_cache_size_mb' above for more information.
|
|
#
|
|
# Default value ("auto") is 1/256th of the heap or 10MB, whichever is greater
|
|
thrift_prepared_statements_cache_size_mb:
|
|
|
|
# Maximum size of the key cache in memory.
|
|
#
|
|
# Each key cache hit saves 1 seek and each row cache hit saves 2 seeks at the
|
|
# minimum, sometimes more. The key cache is fairly tiny for the amount of
|
|
# time it saves, so it's worthwhile to use it at large numbers.
|
|
# The row cache saves even more time, but must contain the entire row,
|
|
# so it is extremely space-intensive. It's best to only use the
|
|
# row cache if you have hot rows or static rows.
|
|
#
|
|
# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
|
|
#
|
|
# Default value is empty to make it "auto" (min(5% of Heap (in MB), 100MB)). Set to 0 to disable key cache.
|
|
key_cache_size_in_mb:
|
|
|
|
# Duration in seconds after which Cassandra should
|
|
# save the key cache. Caches are saved to saved_caches_directory as
|
|
# specified in this configuration file.
|
|
#
|
|
# Saved caches greatly improve cold-start speeds, and is relatively cheap in
|
|
# terms of I/O for the key cache. Row cache saving is much more expensive and
|
|
# has limited use.
|
|
#
|
|
# Default is 14400 or 4 hours.
|
|
key_cache_save_period: 14400
|
|
|
|
# Number of keys from the key cache to save
|
|
# Disabled by default, meaning all keys are going to be saved
|
|
# key_cache_keys_to_save: 100
|
|
|
|
# Row cache implementation class name. Available implementations:
|
|
#
|
|
# org.apache.cassandra.cache.OHCProvider
|
|
# Fully off-heap row cache implementation (default).
|
|
#
|
|
# org.apache.cassandra.cache.SerializingCacheProvider
|
|
# This is the row cache implementation availabile
|
|
# in previous releases of Cassandra.
|
|
# row_cache_class_name: org.apache.cassandra.cache.OHCProvider
|
|
|
|
# Maximum size of the row cache in memory.
|
|
# Please note that OHC cache implementation requires some additional off-heap memory to manage
|
|
# the map structures and some in-flight memory during operations before/after cache entries can be
|
|
# accounted against the cache capacity. This overhead is usually small compared to the whole capacity.
|
|
# Do not specify more memory that the system can afford in the worst usual situation and leave some
|
|
# headroom for OS block level cache. Do never allow your system to swap.
|
|
#
|
|
# Default value is 0, to disable row caching.
|
|
row_cache_size_in_mb: 0
|
|
|
|
# Duration in seconds after which Cassandra should save the row cache.
|
|
# Caches are saved to saved_caches_directory as specified in this configuration file.
|
|
#
|
|
# Saved caches greatly improve cold-start speeds, and is relatively cheap in
|
|
# terms of I/O for the key cache. Row cache saving is much more expensive and
|
|
# has limited use.
|
|
#
|
|
# Default is 0 to disable saving the row cache.
|
|
row_cache_save_period: 0
|
|
|
|
# Number of keys from the row cache to save.
|
|
# Specify 0 (which is the default), meaning all keys are going to be saved
|
|
# row_cache_keys_to_save: 100
|
|
|
|
# Maximum size of the counter cache in memory.
|
|
#
|
|
# Counter cache helps to reduce counter locks' contention for hot counter cells.
|
|
# In case of RF = 1 a counter cache hit will cause Cassandra to skip the read before
|
|
# write entirely. With RF > 1 a counter cache hit will still help to reduce the duration
|
|
# of the lock hold, helping with hot counter cell updates, but will not allow skipping
|
|
# the read entirely. Only the local (clock, count) tuple of a counter cell is kept
|
|
# in memory, not the whole counter, so it's relatively cheap.
|
|
#
|
|
# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
|
|
#
|
|
# Default value is empty to make it "auto" (min(2.5% of Heap (in MB), 50MB)). Set to 0 to disable counter cache.
|
|
# NOTE: if you perform counter deletes and rely on low gcgs, you should disable the counter cache.
|
|
counter_cache_size_in_mb:
|
|
|
|
# Duration in seconds after which Cassandra should
|
|
# save the counter cache (keys only). Caches are saved to saved_caches_directory as
|
|
# specified in this configuration file.
|
|
#
|
|
# Default is 7200 or 2 hours.
|
|
counter_cache_save_period: 7200
|
|
|
|
# Number of keys from the counter cache to save
|
|
# Disabled by default, meaning all keys are going to be saved
|
|
# counter_cache_keys_to_save: 100
|
|
|
|
# saved caches
|
|
# If not set, the default directory is $CASSANDRA_HOME/data/saved_caches.
|
|
saved_caches_directory: /var/lib/cassandra/saved_caches
|
|
|
|
# commitlog_sync may be either "periodic" or "batch."
|
|
#
|
|
# When in batch mode, Cassandra won't ack writes until the commit log
|
|
# has been fsynced to disk. It will wait
|
|
# commitlog_sync_batch_window_in_ms milliseconds between fsyncs.
|
|
# This window should be kept short because the writer threads will
|
|
# be unable to do extra work while waiting. (You may need to increase
|
|
# concurrent_writes for the same reason.)
|
|
#
|
|
# commitlog_sync: batch
|
|
# commitlog_sync_batch_window_in_ms: 2
|
|
#
|
|
# the other option is "periodic" where writes may be acked immediately
|
|
# and the CommitLog is simply synced every commitlog_sync_period_in_ms
|
|
# milliseconds.
|
|
commitlog_sync: periodic
|
|
commitlog_sync_period_in_ms: 10000
|
|
|
|
# The size of the individual commitlog file segments. A commitlog
|
|
# segment may be archived, deleted, or recycled once all the data
|
|
# in it (potentially from each columnfamily in the system) has been
|
|
# flushed to sstables.
|
|
#
|
|
# The default size is 32, which is almost always fine, but if you are
|
|
# archiving commitlog segments (see commitlog_archiving.properties),
|
|
# then you probably want a finer granularity of archiving; 8 or 16 MB
|
|
# is reasonable.
|
|
# Max mutation size is also configurable via max_mutation_size_in_kb setting in
|
|
# cassandra.yaml. The default is half the size commitlog_segment_size_in_mb * 1024.
|
|
#
|
|
# NOTE: If max_mutation_size_in_kb is set explicitly then commitlog_segment_size_in_mb must
|
|
# be set to at least twice the size of max_mutation_size_in_kb / 1024
|
|
#
|
|
commitlog_segment_size_in_mb: 32
|
|
|
|
# Compression to apply to the commit log. If omitted, the commit log
|
|
# will be written uncompressed. LZ4, Snappy, and Deflate compressors
|
|
# are supported.
|
|
# commitlog_compression:
|
|
# - class_name: LZ4Compressor
|
|
# parameters:
|
|
# -
|
|
|
|
# any class that implements the SeedProvider interface and has a
|
|
# constructor that takes a Map<String, String> of parameters will do.
|
|
seed_provider:
|
|
# Addresses of hosts that are deemed contact points.
|
|
# Cassandra nodes use this list of hosts to find each other and learn
|
|
# the topology of the ring. You must change this if you are running
|
|
# multiple nodes!
|
|
- class_name: org.apache.cassandra.locator.SimpleSeedProvider
|
|
parameters:
|
|
# seeds is actually a comma-delimited list of addresses.
|
|
# Ex: "<ip1>,<ip2>,<ip3>"
|
|
- seeds: "127.0.0.1"
|
|
|
|
# For workloads with more data than can fit in memory, Cassandra's
|
|
# bottleneck will be reads that need to fetch data from
|
|
# disk. "concurrent_reads" should be set to (16 * number_of_drives) in
|
|
# order to allow the operations to enqueue low enough in the stack
|
|
# that the OS and drives can reorder them. Same applies to
|
|
# "concurrent_counter_writes", since counter writes read the current
|
|
# values before incrementing and writing them back.
|
|
#
|
|
# On the other hand, since writes are almost never IO bound, the ideal
|
|
# number of "concurrent_writes" is dependent on the number of cores in
|
|
# your system; (8 * number_of_cores) is a good rule of thumb.
|
|
concurrent_reads: 32
|
|
concurrent_writes: 32
|
|
concurrent_counter_writes: 32
|
|
|
|
# For materialized view writes, as there is a read involved, so this should
|
|
# be limited by the less of concurrent reads or concurrent writes.
|
|
concurrent_materialized_view_writes: 32
|
|
|
|
# Maximum memory to use for sstable chunk cache and buffer pooling.
|
|
# 32MB of this are reserved for pooling buffers, the rest is used as an
|
|
# cache that holds uncompressed sstable chunks.
|
|
# Defaults to the smaller of 1/4 of heap or 512MB. This pool is allocated off-heap,
|
|
# so is in addition to the memory allocated for heap. The cache also has on-heap
|
|
# overhead which is roughly 128 bytes per chunk (i.e. 0.2% of the reserved size
|
|
# if the default 64k chunk size is used).
|
|
# Memory is only allocated when needed.
|
|
# file_cache_size_in_mb: 512
|
|
|
|
# Flag indicating whether to allocate on or off heap when the sstable buffer
|
|
# pool is exhausted, that is when it has exceeded the maximum memory
|
|
# file_cache_size_in_mb, beyond which it will not cache buffers but allocate on request.
|
|
|
|
# buffer_pool_use_heap_if_exhausted: true
|
|
|
|
# The strategy for optimizing disk read
|
|
# Possible values are:
|
|
# ssd (for solid state disks, the default)
|
|
# spinning (for spinning disks)
|
|
# disk_optimization_strategy: ssd
|
|
|
|
# Total permitted memory to use for memtables. Cassandra will stop
|
|
# accepting writes when the limit is exceeded until a flush completes,
|
|
# and will trigger a flush based on memtable_cleanup_threshold
|
|
# If omitted, Cassandra will set both to 1/4 the size of the heap.
|
|
# memtable_heap_space_in_mb: 2048
|
|
# memtable_offheap_space_in_mb: 2048
|
|
|
|
# Ratio of occupied non-flushing memtable size to total permitted size
|
|
# that will trigger a flush of the largest memtable. Larger mct will
|
|
# mean larger flushes and hence less compaction, but also less concurrent
|
|
# flush activity which can make it difficult to keep your disks fed
|
|
# under heavy write load.
|
|
#
|
|
# memtable_cleanup_threshold defaults to 1 / (memtable_flush_writers + 1)
|
|
# memtable_cleanup_threshold: 0.11
|
|
|
|
# Specify the way Cassandra allocates and manages memtable memory.
|
|
# Options are:
|
|
#
|
|
# heap_buffers
|
|
# on heap nio buffers
|
|
#
|
|
# offheap_buffers
|
|
# off heap (direct) nio buffers
|
|
#
|
|
# offheap_objects
|
|
# off heap objects
|
|
memtable_allocation_type: heap_buffers
|
|
|
|
# Total space to use for commit logs on disk.
|
|
#
|
|
# If space gets above this value, Cassandra will flush every dirty CF
|
|
# in the oldest segment and remove it. So a small total commitlog space
|
|
# will tend to cause more flush activity on less-active columnfamilies.
|
|
#
|
|
# The default value is the smaller of 8192, and 1/4 of the total space
|
|
# of the commitlog volume.
|
|
#
|
|
# commitlog_total_space_in_mb: 8192
|
|
|
|
# This sets the amount of memtable flush writer threads. These will
|
|
# be blocked by disk io, and each one will hold a memtable in memory
|
|
# while blocked.
|
|
#
|
|
# memtable_flush_writers defaults to one per data_file_directory.
|
|
#
|
|
# If your data directories are backed by SSD, you can increase this, but
|
|
# avoid having memtable_flush_writers * data_file_directories > number of cores
|
|
#memtable_flush_writers: 1
|
|
|
|
# Total space to use for change-data-capture logs on disk.
|
|
#
|
|
# If space gets above this value, Cassandra will throw WriteTimeoutException
|
|
# on Mutations including tables with CDC enabled. A CDCCompactor is responsible
|
|
# for parsing the raw CDC logs and deleting them when parsing is completed.
|
|
#
|
|
# The default value is the min of 4096 mb and 1/8th of the total space
|
|
# of the drive where cdc_raw_directory resides.
|
|
# cdc_total_space_in_mb: 4096
|
|
|
|
# When we hit our cdc_raw limit and the CDCCompactor is either running behind
|
|
# or experiencing backpressure, we check at the following interval to see if any
|
|
# new space for cdc-tracked tables has been made available. Default to 250ms
|
|
# cdc_free_space_check_interval_ms: 250
|
|
|
|
# A fixed memory pool size in MB for for SSTable index summaries. If left
|
|
# empty, this will default to 5% of the heap size. If the memory usage of
|
|
# all index summaries exceeds this limit, SSTables with low read rates will
|
|
# shrink their index summaries in order to meet this limit. However, this
|
|
# is a best-effort process. In extreme conditions Cassandra may need to use
|
|
# more than this amount of memory.
|
|
index_summary_capacity_in_mb:
|
|
|
|
# How frequently index summaries should be resampled. This is done
|
|
# periodically to redistribute memory from the fixed-size pool to sstables
|
|
# proportional their recent read rates. Setting to -1 will disable this
|
|
# process, leaving existing index summaries at their current sampling level.
|
|
index_summary_resize_interval_in_minutes: 60
|
|
|
|
# Whether to, when doing sequential writing, fsync() at intervals in
|
|
# order to force the operating system to flush the dirty
|
|
# buffers. Enable this to avoid sudden dirty buffer flushing from
|
|
# impacting read latencies. Almost always a good idea on SSDs; not
|
|
# necessarily on platters.
|
|
trickle_fsync: false
|
|
trickle_fsync_interval_in_kb: 10240
|
|
|
|
# TCP port, for commands and data
|
|
# For security reasons, you should not expose this port to the internet. Firewall it if needed.
|
|
storage_port: 7000
|
|
|
|
# SSL port, for encrypted communication. Unused unless enabled in
|
|
# encryption_options
|
|
# For security reasons, you should not expose this port to the internet. Firewall it if needed.
|
|
ssl_storage_port: 7001
|
|
|
|
# Address or interface to bind to and tell other Cassandra nodes to connect to.
|
|
# You _must_ change this if you want multiple nodes to be able to communicate!
|
|
#
|
|
# Set listen_address OR listen_interface, not both.
|
|
#
|
|
# Leaving it blank leaves it up to InetAddress.getLocalHost(). This
|
|
# will always do the Right Thing _if_ the node is properly configured
|
|
# (hostname, name resolution, etc), and the Right Thing is to use the
|
|
# address associated with the hostname (it might not be).
|
|
#
|
|
# Setting listen_address to 0.0.0.0 is always wrong.
|
|
#
|
|
listen_address: 172.17.0.3
|
|
|
|
# Set listen_address OR listen_interface, not both. Interfaces must correspond
|
|
# to a single address, IP aliasing is not supported.
|
|
# listen_interface: eth0
|
|
|
|
# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address
|
|
# you can specify which should be chosen using listen_interface_prefer_ipv6. If false the first ipv4
|
|
# address will be used. If true the first ipv6 address will be used. Defaults to false preferring
|
|
# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6.
|
|
# listen_interface_prefer_ipv6: false
|
|
|
|
# Address to broadcast to other Cassandra nodes
|
|
# Leaving this blank will set it to the same value as listen_address
|
|
broadcast_address: 127.0.0.1
|
|
|
|
# When using multiple physical network interfaces, set this
|
|
# to true to listen on broadcast_address in addition to
|
|
# the listen_address, allowing nodes to communicate in both
|
|
# interfaces.
|
|
# Ignore this property if the network configuration automatically
|
|
# routes between the public and private networks such as EC2.
|
|
# listen_on_broadcast_address: false
|
|
|
|
# Internode authentication backend, implementing IInternodeAuthenticator;
|
|
# used to allow/disallow connections from peer nodes.
|
|
# internode_authenticator: org.apache.cassandra.auth.AllowAllInternodeAuthenticator
|
|
|
|
# Whether to start the native transport server.
|
|
# Please note that the address on which the native transport is bound is the
|
|
# same as the rpc_address. The port however is different and specified below.
|
|
start_native_transport: true
|
|
# port for the CQL native transport to listen for clients on
|
|
# For security reasons, you should not expose this port to the internet. Firewall it if needed.
|
|
native_transport_port: 9042
|
|
# Enabling native transport encryption in client_encryption_options allows you to either use
|
|
# encryption for the standard port or to use a dedicated, additional port along with the unencrypted
|
|
# standard native_transport_port.
|
|
# Enabling client encryption and keeping native_transport_port_ssl disabled will use encryption
|
|
# for native_transport_port. Setting native_transport_port_ssl to a different value
|
|
# from native_transport_port will use encryption for native_transport_port_ssl while
|
|
# keeping native_transport_port unencrypted.
|
|
# native_transport_port_ssl: 9142
|
|
# The maximum threads for handling requests when the native transport is used.
|
|
# This is similar to rpc_max_threads though the default differs slightly (and
|
|
# there is no native_transport_min_threads, idle threads will always be stopped
|
|
# after 30 seconds).
|
|
# native_transport_max_threads: 128
|
|
#
|
|
# The maximum size of allowed frame. Frame (requests) larger than this will
|
|
# be rejected as invalid. The default is 256MB. If you're changing this parameter,
|
|
# you may want to adjust max_value_size_in_mb accordingly.
|
|
# native_transport_max_frame_size_in_mb: 256
|
|
|
|
# The maximum number of concurrent client connections.
|
|
# The default is -1, which means unlimited.
|
|
# native_transport_max_concurrent_connections: -1
|
|
|
|
# The maximum number of concurrent client connections per source ip.
|
|
# The default is -1, which means unlimited.
|
|
# native_transport_max_concurrent_connections_per_ip: -1
|
|
|
|
# Whether to start the thrift rpc server.
|
|
start_rpc: false
|
|
|
|
# The address or interface to bind the Thrift RPC service and native transport
|
|
# server to.
|
|
#
|
|
# Set rpc_address OR rpc_interface, not both.
|
|
#
|
|
# Leaving rpc_address blank has the same effect as on listen_address
|
|
# (i.e. it will be based on the configured hostname of the node).
|
|
#
|
|
# Note that unlike listen_address, you can specify 0.0.0.0, but you must also
|
|
# set broadcast_rpc_address to a value other than 0.0.0.0.
|
|
#
|
|
# For security reasons, you should not expose this port to the internet. Firewall it if needed.
|
|
rpc_address: 0.0.0.0
|
|
|
|
# Set rpc_address OR rpc_interface, not both. Interfaces must correspond
|
|
# to a single address, IP aliasing is not supported.
|
|
# rpc_interface: eth1
|
|
|
|
# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address
|
|
# you can specify which should be chosen using rpc_interface_prefer_ipv6. If false the first ipv4
|
|
# address will be used. If true the first ipv6 address will be used. Defaults to false preferring
|
|
# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6.
|
|
# rpc_interface_prefer_ipv6: false
|
|
|
|
# port for Thrift to listen for clients on
|
|
rpc_port: 9160
|
|
|
|
# RPC address to broadcast to drivers and other Cassandra nodes. This cannot
|
|
# be set to 0.0.0.0. If left blank, this will be set to the value of
|
|
# rpc_address. If rpc_address is set to 0.0.0.0, broadcast_rpc_address must
|
|
# be set.
|
|
broadcast_rpc_address: 127.0.0.1
|
|
|
|
# enable or disable keepalive on rpc/native connections
|
|
rpc_keepalive: true
|
|
|
|
# Cassandra provides two out-of-the-box options for the RPC Server:
|
|
#
|
|
# sync
|
|
# One thread per thrift connection. For a very large number of clients, memory
|
|
# will be your limiting factor. On a 64 bit JVM, 180KB is the minimum stack size
|
|
# per thread, and that will correspond to your use of virtual memory (but physical memory
|
|
# may be limited depending on use of stack space).
|
|
#
|
|
# hsha
|
|
# Stands for "half synchronous, half asynchronous." All thrift clients are handled
|
|
# asynchronously using a small number of threads that does not vary with the amount
|
|
# of thrift clients (and thus scales well to many clients). The rpc requests are still
|
|
# synchronous (one thread per active request). If hsha is selected then it is essential
|
|
# that rpc_max_threads is changed from the default value of unlimited.
|
|
#
|
|
# The default is sync because on Windows hsha is about 30% slower. On Linux,
|
|
# sync/hsha performance is about the same, with hsha of course using less memory.
|
|
#
|
|
# Alternatively, can provide your own RPC server by providing the fully-qualified class name
|
|
# of an o.a.c.t.TServerFactory that can create an instance of it.
|
|
rpc_server_type: sync
|
|
|
|
# Uncomment rpc_min|max_thread to set request pool size limits.
|
|
#
|
|
# Regardless of your choice of RPC server (see above), the number of maximum requests in the
|
|
# RPC thread pool dictates how many concurrent requests are possible (but if you are using the sync
|
|
# RPC server, it also dictates the number of clients that can be connected at all).
|
|
#
|
|
# The default is unlimited and thus provides no protection against clients overwhelming the server. You are
|
|
# encouraged to set a maximum that makes sense for you in production, but do keep in mind that
|
|
# rpc_max_threads represents the maximum number of client requests this server may execute concurrently.
|
|
#
|
|
# rpc_min_threads: 16
|
|
# rpc_max_threads: 2048
|
|
|
|
# uncomment to set socket buffer sizes on rpc connections
|
|
# rpc_send_buff_size_in_bytes:
|
|
# rpc_recv_buff_size_in_bytes:
|
|
|
|
# Uncomment to set socket buffer size for internode communication
|
|
# Note that when setting this, the buffer size is limited by net.core.wmem_max
|
|
# and when not setting it it is defined by net.ipv4.tcp_wmem
|
|
# See also:
|
|
# /proc/sys/net/core/wmem_max
|
|
# /proc/sys/net/core/rmem_max
|
|
# /proc/sys/net/ipv4/tcp_wmem
|
|
# /proc/sys/net/ipv4/tcp_wmem
|
|
# and 'man tcp'
|
|
# internode_send_buff_size_in_bytes:
|
|
|
|
# Uncomment to set socket buffer size for internode communication
|
|
# Note that when setting this, the buffer size is limited by net.core.wmem_max
|
|
# and when not setting it it is defined by net.ipv4.tcp_wmem
|
|
# internode_recv_buff_size_in_bytes:
|
|
|
|
# Frame size for thrift (maximum message length).
|
|
thrift_framed_transport_size_in_mb: 15
|
|
|
|
# Set to true to have Cassandra create a hard link to each sstable
|
|
# flushed or streamed locally in a backups/ subdirectory of the
|
|
# keyspace data. Removing these links is the operator's
|
|
# responsibility.
|
|
incremental_backups: false
|
|
|
|
# Whether or not to take a snapshot before each compaction. Be
|
|
# careful using this option, since Cassandra won't clean up the
|
|
# snapshots for you. Mostly useful if you're paranoid when there
|
|
# is a data format change.
|
|
snapshot_before_compaction: false
|
|
|
|
# Whether or not a snapshot is taken of the data before keyspace truncation
|
|
# or dropping of column families. The STRONGLY advised default of true
|
|
# should be used to provide data safety. If you set this flag to false, you will
|
|
# lose data on truncation or drop.
|
|
auto_snapshot: true
|
|
|
|
# Granularity of the collation index of rows within a partition.
|
|
# Increase if your rows are large, or if you have a very large
|
|
# number of rows per partition. The competing goals are these:
|
|
#
|
|
# - a smaller granularity means more index entries are generated
|
|
# and looking up rows withing the partition by collation column
|
|
# is faster
|
|
# - but, Cassandra will keep the collation index in memory for hot
|
|
# rows (as part of the key cache), so a larger granularity means
|
|
# you can cache more hot rows
|
|
column_index_size_in_kb: 64
|
|
|
|
# Per sstable indexed key cache entries (the collation index in memory
|
|
# mentioned above) exceeding this size will not be held on heap.
|
|
# This means that only partition information is held on heap and the
|
|
# index entries are read from disk.
|
|
#
|
|
# Note that this size refers to the size of the
|
|
# serialized index information and not the size of the partition.
|
|
column_index_cache_size_in_kb: 2
|
|
|
|
# Number of simultaneous compactions to allow, NOT including
|
|
# validation "compactions" for anti-entropy repair. Simultaneous
|
|
# compactions can help preserve read performance in a mixed read/write
|
|
# workload, by mitigating the tendency of small sstables to accumulate
|
|
# during a single long running compactions. The default is usually
|
|
# fine and if you experience problems with compaction running too
|
|
# slowly or too fast, you should look at
|
|
# compaction_throughput_mb_per_sec first.
|
|
#
|
|
# concurrent_compactors defaults to the smaller of (number of disks,
|
|
# number of cores), with a minimum of 2 and a maximum of 8.
|
|
#
|
|
# If your data directories are backed by SSD, you should increase this
|
|
# to the number of cores.
|
|
#concurrent_compactors: 1
|
|
|
|
# Throttles compaction to the given total throughput across the entire
|
|
# system. The faster you insert data, the faster you need to compact in
|
|
# order to keep the sstable count down, but in general, setting this to
|
|
# 16 to 32 times the rate you are inserting data is more than sufficient.
|
|
# Setting this to 0 disables throttling. Note that this account for all types
|
|
# of compaction, including validation compaction.
|
|
compaction_throughput_mb_per_sec: 16
|
|
|
|
# When compacting, the replacement sstable(s) can be opened before they
|
|
# are completely written, and used in place of the prior sstables for
|
|
# any range that has been written. This helps to smoothly transfer reads
|
|
# between the sstables, reducing page cache churn and keeping hot rows hot
|
|
sstable_preemptive_open_interval_in_mb: 50
|
|
|
|
# Throttles all outbound streaming file transfers on this node to the
|
|
# given total throughput in Mbps. This is necessary because Cassandra does
|
|
# mostly sequential IO when streaming data during bootstrap or repair, which
|
|
# can lead to saturating the network connection and degrading rpc performance.
|
|
# When unset, the default is 200 Mbps or 25 MB/s.
|
|
# stream_throughput_outbound_megabits_per_sec: 200
|
|
|
|
# Throttles all streaming file transfer between the datacenters,
|
|
# this setting allows users to throttle inter dc stream throughput in addition
|
|
# to throttling all network stream traffic as configured with
|
|
# stream_throughput_outbound_megabits_per_sec
|
|
# When unset, the default is 200 Mbps or 25 MB/s
|
|
# inter_dc_stream_throughput_outbound_megabits_per_sec: 200
|
|
|
|
# How long the coordinator should wait for read operations to complete
|
|
read_request_timeout_in_ms: 5000
|
|
# How long the coordinator should wait for seq or index scans to complete
|
|
range_request_timeout_in_ms: 10000
|
|
# How long the coordinator should wait for writes to complete
|
|
write_request_timeout_in_ms: 2000
|
|
# How long the coordinator should wait for counter writes to complete
|
|
counter_write_request_timeout_in_ms: 5000
|
|
# How long a coordinator should continue to retry a CAS operation
|
|
# that contends with other proposals for the same row
|
|
cas_contention_timeout_in_ms: 1000
|
|
# How long the coordinator should wait for truncates to complete
|
|
# (This can be much longer, because unless auto_snapshot is disabled
|
|
# we need to flush first so we can snapshot before removing the data.)
|
|
truncate_request_timeout_in_ms: 60000
|
|
# The default timeout for other, miscellaneous operations
|
|
request_timeout_in_ms: 10000
|
|
|
|
# Enable operation timeout information exchange between nodes to accurately
|
|
# measure request timeouts. If disabled, replicas will assume that requests
|
|
# were forwarded to them instantly by the coordinator, which means that
|
|
# under overload conditions we will waste that much extra time processing
|
|
# already-timed-out requests.
|
|
#
|
|
# Warning: before enabling this property make sure to ntp is installed
|
|
# and the times are synchronized between the nodes.
|
|
cross_node_timeout: false
|
|
|
|
# Set socket timeout for streaming operation.
|
|
# The stream session is failed if no data/ack is received by any of the participants
|
|
# within that period, which means this should also be sufficient to stream a large
|
|
# sstable or rebuild table indexes.
|
|
# Default value is 86400000ms, which means stale streams timeout after 24 hours.
|
|
# A value of zero means stream sockets should never time out.
|
|
# streaming_socket_timeout_in_ms: 86400000
|
|
|
|
# phi value that must be reached for a host to be marked down.
|
|
# most users should never need to adjust this.
|
|
# phi_convict_threshold: 8
|
|
|
|
# endpoint_snitch -- Set this to a class that implements
|
|
# IEndpointSnitch. The snitch has two functions:
|
|
#
|
|
# - it teaches Cassandra enough about your network topology to route
|
|
# requests efficiently
|
|
# - it allows Cassandra to spread replicas around your cluster to avoid
|
|
# correlated failures. It does this by grouping machines into
|
|
# "datacenters" and "racks." Cassandra will do its best not to have
|
|
# more than one replica on the same "rack" (which may not actually
|
|
# be a physical location)
|
|
#
|
|
# CASSANDRA WILL NOT ALLOW YOU TO SWITCH TO AN INCOMPATIBLE SNITCH
|
|
# ONCE DATA IS INSERTED INTO THE CLUSTER. This would cause data loss.
|
|
# This means that if you start with the default SimpleSnitch, which
|
|
# locates every node on "rack1" in "datacenter1", your only options
|
|
# if you need to add another datacenter are GossipingPropertyFileSnitch
|
|
# (and the older PFS). From there, if you want to migrate to an
|
|
# incompatible snitch like Ec2Snitch you can do it by adding new nodes
|
|
# under Ec2Snitch (which will locate them in a new "datacenter") and
|
|
# decommissioning the old ones.
|
|
#
|
|
# Out of the box, Cassandra provides:
|
|
#
|
|
# SimpleSnitch:
|
|
# Treats Strategy order as proximity. This can improve cache
|
|
# locality when disabling read repair. Only appropriate for
|
|
# single-datacenter deployments.
|
|
#
|
|
# GossipingPropertyFileSnitch
|
|
# This should be your go-to snitch for production use. The rack
|
|
# and datacenter for the local node are defined in
|
|
# cassandra-rackdc.properties and propagated to other nodes via
|
|
# gossip. If cassandra-topology.properties exists, it is used as a
|
|
# fallback, allowing migration from the PropertyFileSnitch.
|
|
#
|
|
# PropertyFileSnitch:
|
|
# Proximity is determined by rack and data center, which are
|
|
# explicitly configured in cassandra-topology.properties.
|
|
#
|
|
# Ec2Snitch:
|
|
# Appropriate for EC2 deployments in a single Region. Loads Region
|
|
# and Availability Zone information from the EC2 API. The Region is
|
|
# treated as the datacenter, and the Availability Zone as the rack.
|
|
# Only private IPs are used, so this will not work across multiple
|
|
# Regions.
|
|
#
|
|
# Ec2MultiRegionSnitch:
|
|
# Uses public IPs as broadcast_address to allow cross-region
|
|
# connectivity. (Thus, you should set seed addresses to the public
|
|
# IP as well.) You will need to open the storage_port or
|
|
# ssl_storage_port on the public IP firewall. (For intra-Region
|
|
# traffic, Cassandra will switch to the private IP after
|
|
# establishing a connection.)
|
|
#
|
|
# RackInferringSnitch:
|
|
# Proximity is determined by rack and data center, which are
|
|
# assumed to correspond to the 3rd and 2nd octet of each node's IP
|
|
# address, respectively. Unless this happens to match your
|
|
# deployment conventions, this is best used as an example of
|
|
# writing a custom Snitch class and is provided in that spirit.
|
|
#
|
|
# You can use a custom Snitch by setting this to the full class name
|
|
# of the snitch, which will be assumed to be on your classpath.
|
|
endpoint_snitch: SimpleSnitch
|
|
|
|
# controls how often to perform the more expensive part of host score
|
|
# calculation
|
|
dynamic_snitch_update_interval_in_ms: 100
|
|
# controls how often to reset all host scores, allowing a bad host to
|
|
# possibly recover
|
|
dynamic_snitch_reset_interval_in_ms: 600000
|
|
# if set greater than zero and read_repair_chance is < 1.0, this will allow
|
|
# 'pinning' of replicas to hosts in order to increase cache capacity.
|
|
# The badness threshold will control how much worse the pinned host has to be
|
|
# before the dynamic snitch will prefer other replicas over it. This is
|
|
# expressed as a double which represents a percentage. Thus, a value of
|
|
# 0.2 means Cassandra would continue to prefer the static snitch values
|
|
# until the pinned host was 20% worse than the fastest.
|
|
dynamic_snitch_badness_threshold: 0.1
|
|
|
|
# request_scheduler -- Set this to a class that implements
|
|
# RequestScheduler, which will schedule incoming client requests
|
|
# according to the specific policy. This is useful for multi-tenancy
|
|
# with a single Cassandra cluster.
|
|
# NOTE: This is specifically for requests from the client and does
|
|
# not affect inter node communication.
|
|
# org.apache.cassandra.scheduler.NoScheduler - No scheduling takes place
|
|
# org.apache.cassandra.scheduler.RoundRobinScheduler - Round robin of
|
|
# client requests to a node with a separate queue for each
|
|
# request_scheduler_id. The scheduler is further customized by
|
|
# request_scheduler_options as described below.
|
|
request_scheduler: org.apache.cassandra.scheduler.NoScheduler
|
|
|
|
# Scheduler Options vary based on the type of scheduler
|
|
#
|
|
# NoScheduler
|
|
# Has no options
|
|
#
|
|
# RoundRobin
|
|
# throttle_limit
|
|
# The throttle_limit is the number of in-flight
|
|
# requests per client. Requests beyond
|
|
# that limit are queued up until
|
|
# running requests can complete.
|
|
# The value of 80 here is twice the number of
|
|
# concurrent_reads + concurrent_writes.
|
|
# default_weight
|
|
# default_weight is optional and allows for
|
|
# overriding the default which is 1.
|
|
# weights
|
|
# Weights are optional and will default to 1 or the
|
|
# overridden default_weight. The weight translates into how
|
|
# many requests are handled during each turn of the
|
|
# RoundRobin, based on the scheduler id.
|
|
#
|
|
# request_scheduler_options:
|
|
# throttle_limit: 80
|
|
# default_weight: 5
|
|
# weights:
|
|
# Keyspace1: 1
|
|
# Keyspace2: 5
|
|
|
|
# request_scheduler_id -- An identifier based on which to perform
|
|
# the request scheduling. Currently the only valid option is keyspace.
|
|
# request_scheduler_id: keyspace
|
|
|
|
# Enable or disable inter-node encryption
|
|
# JVM defaults for supported SSL socket protocols and cipher suites can
|
|
# be replaced using custom encryption options. This is not recommended
|
|
# unless you have policies in place that dictate certain settings, or
|
|
# need to disable vulnerable ciphers or protocols in case the JVM cannot
|
|
# be updated.
|
|
# FIPS compliant settings can be configured at JVM level and should not
|
|
# involve changing encryption settings here:
|
|
# https://docs.oracle.com/javase/8/docs/technotes/guides/security/jsse/FIPS.html
|
|
# *NOTE* No custom encryption options are enabled at the moment
|
|
# The available internode options are : all, none, dc, rack
|
|
#
|
|
# If set to dc cassandra will encrypt the traffic between the DCs
|
|
# If set to rack cassandra will encrypt the traffic between the racks
|
|
#
|
|
# The passwords used in these options must match the passwords used when generating
|
|
# the keystore and truststore. For instructions on generating these files, see:
|
|
# http://download.oracle.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore
|
|
#
|
|
server_encryption_options:
|
|
internode_encryption: none
|
|
keystore: conf/.keystore
|
|
keystore_password: cassandra
|
|
truststore: conf/.truststore
|
|
truststore_password: cassandra
|
|
# More advanced defaults below:
|
|
# protocol: TLS
|
|
# algorithm: SunX509
|
|
# store_type: JKS
|
|
# cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
|
|
# require_client_auth: false
|
|
# require_endpoint_verification: false
|
|
|
|
# enable or disable client/server encryption.
|
|
client_encryption_options:
|
|
enabled: false
|
|
# If enabled and optional is set to true encrypted and unencrypted connections are handled.
|
|
optional: false
|
|
keystore: conf/.keystore
|
|
keystore_password: cassandra
|
|
# require_client_auth: false
|
|
# Set truststore and truststore_password if require_client_auth is true
|
|
# truststore: conf/.truststore
|
|
# truststore_password: cassandra
|
|
# More advanced defaults below:
|
|
# protocol: TLS
|
|
# algorithm: SunX509
|
|
# store_type: JKS
|
|
# cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
|
|
|
|
# internode_compression controls whether traffic between nodes is
|
|
# compressed.
|
|
# Can be:
|
|
#
|
|
# all
|
|
# all traffic is compressed
|
|
#
|
|
# dc
|
|
# traffic between different datacenters is compressed
|
|
#
|
|
# none
|
|
# nothing is compressed.
|
|
internode_compression: dc
|
|
|
|
# Enable or disable tcp_nodelay for inter-dc communication.
|
|
# Disabling it will result in larger (but fewer) network packets being sent,
|
|
# reducing overhead from the TCP protocol itself, at the cost of increasing
|
|
# latency if you block for cross-datacenter responses.
|
|
inter_dc_tcp_nodelay: false
|
|
|
|
# TTL for different trace types used during logging of the repair process.
|
|
tracetype_query_ttl: 86400
|
|
tracetype_repair_ttl: 604800
|
|
|
|
# By default, Cassandra logs GC Pauses greater than 200 ms at INFO level
|
|
# This threshold can be adjusted to minimize logging if necessary
|
|
# gc_log_threshold_in_ms: 200
|
|
|
|
# If unset, all GC Pauses greater than gc_log_threshold_in_ms will log at
|
|
# INFO level
|
|
# UDFs (user defined functions) are disabled by default.
|
|
# As of Cassandra 3.0 there is a sandbox in place that should prevent execution of evil code.
|
|
enable_user_defined_functions: false
|
|
|
|
# Enables scripted UDFs (JavaScript UDFs).
|
|
# Java UDFs are always enabled, if enable_user_defined_functions is true.
|
|
# Enable this option to be able to use UDFs with "language javascript" or any custom JSR-223 provider.
|
|
# This option has no effect, if enable_user_defined_functions is false.
|
|
enable_scripted_user_defined_functions: false
|
|
|
|
# The default Windows kernel timer and scheduling resolution is 15.6ms for power conservation.
|
|
# Lowering this value on Windows can provide much tighter latency and better throughput, however
|
|
# some virtualized environments may see a negative performance impact from changing this setting
|
|
# below their system default. The sysinternals 'clockres' tool can confirm your system's default
|
|
# setting.
|
|
windows_timer_interval: 1
|
|
|
|
|
|
# Enables encrypting data at-rest (on disk). Different key providers can be plugged in, but the default reads from
|
|
# a JCE-style keystore. A single keystore can hold multiple keys, but the one referenced by
|
|
# the "key_alias" is the only key that will be used for encrypt operations; previously used keys
|
|
# can still (and should!) be in the keystore and will be used on decrypt operations
|
|
# (to handle the case of key rotation).
|
|
#
|
|
# It is strongly recommended to download and install Java Cryptography Extension (JCE)
|
|
# Unlimited Strength Jurisdiction Policy Files for your version of the JDK.
|
|
# (current link: http://www.oracle.com/technetwork/java/javase/downloads/jce8-download-2133166.html)
|
|
#
|
|
# Currently, only the following file types are supported for transparent data encryption, although
|
|
# more are coming in future cassandra releases: commitlog, hints
|
|
transparent_data_encryption_options:
|
|
enabled: false
|
|
chunk_length_kb: 64
|
|
cipher: AES/CBC/PKCS5Padding
|
|
key_alias: testing:1
|
|
# CBC IV length for AES needs to be 16 bytes (which is also the default size)
|
|
# iv_length: 16
|
|
key_provider:
|
|
- class_name: org.apache.cassandra.security.JKSKeyProvider
|
|
parameters:
|
|
- keystore: conf/.keystore
|
|
keystore_password: cassandra
|
|
store_type: JCEKS
|
|
key_password: cassandra
|
|
|
|
|
|
#####################
|
|
# SAFETY THRESHOLDS #
|
|
#####################
|
|
|
|
# When executing a scan, within or across a partition, we need to keep the
|
|
# tombstones seen in memory so we can return them to the coordinator, which
|
|
# will use them to make sure other replicas also know about the deleted rows.
|
|
# With workloads that generate a lot of tombstones, this can cause performance
|
|
# problems and even exhaust the server heap.
|
|
# (http://www.datastax.com/dev/blog/cassandra-anti-patterns-queues-and-queue-like-datasets)
|
|
# Adjust the thresholds here if you understand the dangers and want to
|
|
# scan more tombstones anyway. These thresholds may also be adjusted at runtime
|
|
# using the StorageService mbean.
|
|
tombstone_warn_threshold: 1000
|
|
tombstone_failure_threshold: 100000
|
|
|
|
# Log WARN on any batch size exceeding this value. 5kb per batch by default.
|
|
# Caution should be taken on increasing the size of this threshold as it can lead to node instability.
|
|
batch_size_warn_threshold_in_kb: 5
|
|
|
|
# Fail any batch exceeding this value. 50kb (10x warn threshold) by default.
|
|
batch_size_fail_threshold_in_kb: 50
|
|
|
|
# Log WARN on any batches not of type LOGGED than span across more partitions than this limit
|
|
unlogged_batch_across_partitions_warn_threshold: 10
|
|
|
|
# Log a warning when compacting partitions larger than this value
|
|
compaction_large_partition_warning_threshold_mb: 100
|
|
|
|
# GC Pauses greater than gc_warn_threshold_in_ms will be logged at WARN level
|
|
# Adjust the threshold based on your application throughput requirement
|
|
# By default, Cassandra logs GC Pauses greater than 200 ms at INFO level
|
|
gc_warn_threshold_in_ms: 1000
|
|
|
|
# Maximum size of any value in SSTables. Safety measure to detect SSTable corruption
|
|
# early. Any value size larger than this threshold will result into marking an SSTable
|
|
# as corrupted.
|
|
# max_value_size_in_mb: 256
|