* Login MFA
* ENT OSS segragation (#14088)
* Delete method id if not used in an MFA enforcement config (#14063)
* Delete an MFA methodID only if it is not used by an MFA enforcement config
* Fixing a bug: mfa/validate is an unauthenticated path, and goes through the handleLoginRequest path
* adding use_passcode field to DUO config (#14059)
* add changelog
* preventing replay attack on MFA passcodes (#14056)
* preventing replay attack on MFA passcodes
* using %w instead of %s for error
* Improve CLI command for login mfa (#14106)
CLI prints a warning message indicating the login request needs to get validated
* adding the validity period of a passcode to error messages (#14115)
* PR feedback
* duo to handle preventing passcode reuse
Co-authored-by: hghaf099 <83242695+hghaf099@users.noreply.github.com>
Co-authored-by: hamid ghaf <hamid@hashicorp.com>
* port SSCT OSS
* port header hmac key to ent and generate token proto without make command
* remove extra nil check in request handling
* add changelog
* add comment to router.go
* change test var to use length constants
* remove local index is 0 check and extra defer which can be removed after use of ExternalID
* go get vault-plugin-secrets-kv@vault-4290-patch-metadata
* add kv metadata patch command
* add changelog entry
* success tests for kv metadata patch flags
* add more kv metadata patch flags tests
* add kv metadata patch cas warning test
* add kv-v2 key metadata patch API docs
* add kv metadata patch to docs
* prevent unintentional field overwriting in kv metadata put cmd
* like create/update ops, prevent patch to paths ending in /
* fix kv metadata patch cmd in docs
* fix flag defaults for kv metadata put
* go get vault-plugin-secrets-kv@vault-4290-patch-metadata
* fix TestKvMetadataPatchCommand_Flags test
* doc fixes
* go get vault-plugin-secrets-kv@master; go mod tidy
* Fixed null token panic from 'v1/auth/token/' endpoints and returned proper error response
* added changelog entry for PR #13233
* changed error message from 'bad token' to 'null token'
* rebased off of main
* Revert "changed error message from 'bad token' to 'null token'"
This reverts commit 381ed9b32c5ddd5e47adb1643ef7e46fb768bc76.
* changed 'bad token' error message to 'invalid token' after revert
* remove unnecessary vault-data folder
* VAULT-1564 report in-flight requests
* adding a changelog
* Changing some variable names and fixing comments
* minor style change
* adding unauthenticated support for in-flight-req
* adding documentation for the listener.profiling stanza
* adding an atomic counter for the inflight requests
addressing comments
* addressing comments
* logging completed requests
* fixing a test
* providing log_requests_info as a config option to determine at which level requests should be logged
* removing a member and a method from the StatusHeaderResponseWriter struct
* adding api docks
* revert changes in NewHTTPResponseWriter
* Fix logging invalid log_requests_info value
* Addressing comments
* Fixing a test
* use an tomic value for logRequestsInfo, and moving the CreateClientID function to Core
* fixing go.sum
* minor refactoring
* protecting InFlightRequests from data race
* another try on fixing a data race
* another try to fix a data race
* addressing comments
* fixing couple of tests
* changing log_requests_info to log_requests_level
* minor style change
* fixing a test
* removing the lock in InFlightRequests
* use single-argument form for interface assertion
* adding doc for the new configuration paramter
* adding the new doc to the nav data file
* minor fix
* don't log token error on DR Secondary
* stop gauge collector expiration errors on dr secondary
* don't check dr secondary for token create
* see if CI hits panic
* Revert "don't check dr secondary for token create"
This reverts commit c036a1a544d3a20d29d046f1ee239ab1563ce4d9.
* don't check dr secondary for token create
* Revert "see if CI hits panic"
This reverts commit 1e15aa535cac6e4d1684aaf47c8746c094068eb8.
* remove condition on log
* fix adding clientID to request in audit log
* fix boolean statement
* use standard encoding for client ID instead of urlEncoding
* change encoding in tests
* add in client counts to request handling
* remove redundant client ID generation in request handling
* directly add clientID to req after handling token usage
* Adds ability to define an inline policy and internal metadata to tokens
* Update comment on fetchEntityAndDerivedPolicies
* Simplify handling of inline policy
* Update comment on InternalMeta
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* Improve argument name
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* Use explicit SkipIdentityInheritance token field instead of implicit InlinePolicy behavior
* Add SkipIdentityInheritance to pb struct in token store create method
* Rename SkipIdentityInheritance to NoIdentityPolicies
* Merge latest from main and make proto
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* auth: store period value on tokens created via login
* test: reduce potentially flaskiness due to ttl check
* test: govet on package declaration
* changelog++
* Temporarily remove CL entry
* Add back the CL entry
Co-authored-by: Vishal Nayak <vishalnayakv@gmail.com>
* Add test for 400 status on missing token
* Return logical.StatusBadRequest on missing token
* remove commented out code
Co-authored-by: Vishal Nayak <vishalnayak@users.noreply.github.com>
* Add token creation counters.
* Created a utility to change TTL to bucket name.
* Add counter covering token creation for response wrapping.
* Fix namespace label, with a new utility function.
* Populate a token_ttl and token_issue_time field on the Auth struct of audit log entries, and in the Auth portion of a response for login methods
* Revert go fmt, better zero checking
* Update unit tests
* changelog++
* token/renewal: return full set of token and identity policies in the policies field
* extend tests to cover additional token and identity policies on a token
* verify identity_policies returned on login and renewals
* core: revoke the proper token on partial failures from token-related requests
* move test to vault package, move test trigger to expiration manager
* update logging messages for clarity
* docstring fix
* Don't allow registering a non-root zero TTL token lease
This is defense-in-depth in that such a token was not allowed to be
used; however it's also a bug fix in that this would then cause no lease
to be generated but the token entry to be written, meaning the token
entry would stick around until it was attempted to be used or tidied (in
both cases the internal lookup would see that this was invalid and do a
revoke on the spot).
* Fix tests
* tidy
* Initial work
* rework
* s/dr/recovery
* Add sys/raw support to recovery mode (#7577)
* Factor the raw paths out so they can be run with a SystemBackend.
# Conflicts:
# vault/logical_system.go
* Add handleLogicalRecovery which is like handleLogical but is only
sufficient for use with the sys-raw endpoint in recovery mode. No
authentication is done yet.
* Integrate with recovery-mode. We now handle unauthenticated sys/raw
requests, albeit on path v1/raw instead v1/sys/raw.
* Use sys/raw instead raw during recovery.
* Don't bother persisting the recovery token. Authenticate sys/raw
requests with it.
* RecoveryMode: Support generate-root for autounseals (#7591)
* Recovery: Abstract config creation and log settings
* Recovery mode integration test. (#7600)
* Recovery: Touch up (#7607)
* Recovery: Touch up
* revert the raw backend creation changes
* Added recovery operation token prefix
* Move RawBackend to its own file
* Update API path and hit it using CLI flag on generate-root
* Fix a panic triggered when handling a request that yields a nil response. (#7618)
* Improve integ test to actually make changes while in recovery mode and
verify they're still there after coming back in regular mode.
* Refuse to allow a second recovery token to be generated.
* Resize raft cluster to size 1 and start as leader (#7626)
* RecoveryMode: Setup raft cluster post unseal (#7635)
* Setup raft cluster post unseal in recovery mode
* Remove marking as unsealed as its not needed
* Address review comments
* Accept only one seal config in recovery mode as there is no scope for migration
* Fix various read only storage errors
A mistake we've seen multiple times in our own plugins and that we've
seen in the GCP plugin now is that control flow (how the code is
structured, helper functions, etc.) can obfuscate whether an error came
from storage or some other Vault-core location (in which case likely it
needs to be a 5XX message) or because of user input (thus 4XX). Error
handling for functions therefore often ends up always treating errors as
either user related or internal.
When the error is logical.ErrReadOnly this means that treating errors as
user errors skips the check that triggers forwarding, instead returning
a read only view error to the user.
While it's obviously more correct to fix that code, it's not always
immediately apparent to reviewers or fixers what the issue is and fixing
it when it's found both requires someone to hit the problem and report
it (thus exposing bugs to users) and selective targeted refactoring that
only helps that one specific case.
If instead we check whether the logical.Response is an error and, if so,
whether it contains the error value, we work around this in all of these
cases automatically. It feels hacky since it's a coding mistake, but
it's one we've made too multiple times, and avoiding bugs altogether is
better for our users.
Earlier in tokenutil's dev it seemed like there was no reason to allow
auth plugins to toggle renewability off. However, it turns out Centrify
makes use of this for sensible reasons. As a result, move the forcing-on
of renewability into tokenutil, but then allow overriding after
PopulateTokenAuth is called.
* Fix a deadlock if a panic happens during request handling
During request handling, if a panic is created, deferred functions are
run but otherwise execution stops. #5889 changed some locks to
non-defers but had the side effect of causing the read lock to not be
released if the request panicked. This fixes that and addresses a few
other potential places where things could go wrong:
1) In sealInitCommon we always now defer a function that unlocks the
read lock if it hasn't been unlocked already
2) In StepDown we defer the RUnlock but we also had two error cases that
were calling it manually. These are unlikely to be hit but if they were
I believe would cause a panic.
* Add panic recovery test
Move audit.LogInput to sdk/logical. Allow the Data values in audited
logical.Request and Response to implement OptMarshaler, in which case
we delegate hashing/serializing responsibility to them. Add new
ClientCertificateSerialNumber audit request field.
SystemView can now be cast to ExtendedSystemView to expose the Auditor
interface, which allows submitting requests and responses to the audit
broker.
* Port over some SP v2 bits
Specifically:
* Add too-large handling to Physical (Consul only for now)
* Contextify some identity funcs
* Update SP protos
* Add size limiting to inmem storage
Increment a counter whenever a request is received.
The in-memory counter is persisted to counters/requests/YYYY/MM.
When the month wraps around, we reset the in-memory counter to
zero.
Add an endpoint for querying the request counters across all time.
* Fixes a regression in forwarding from #6115
Although removing the authentication header is good defense in depth,
for forwarding mechanisms that use the raw request, we never add it
back. This caused perf standby tests to throw errors. Instead, once
we're past the point at which we would do any raw forwarding, but before
routing the request, remove the header.
To speed this up, a flag is set in the logical.Request to indicate where
the token is sourced from. That way we don't iterate through maps
unnecessarily.
The result will still pass gofmtcheck and won't trigger additional
changes if someone isn't using goimports, but it will avoid the
piecemeal imports changes we've been seeing.
* Fix for using ExplicitMaxTTL in auth method plugins.
* Reverted pb.go files for readability of PR.
* Fixed indenting of comment.
* Reverted unintended change by go test.
* Initial work on templating
* Add check for unbalanced closing in front
* Add missing templated assignment
* Add first cut of end-to-end test on templating.
* Make template errors be 403s and finish up testing
* Review feedback
* plumbing request context to expiration manager
* moar context
* address feedback
* only using active context for revoke prefix
* using active context for revoke commands
* cancel tidy on active context
* address feedback
* core: Cancel context before taking state lock
* Create active context outside of postUnseal
* Attempt to drain requests before canceling context
* fix test
* Add request timeouts in normal request path and to expirations
* Add ability to adjust default max request duration
* Some test fixes
* Ensure tests have defaults set for max request duration
* Add context cancel checking to inmem/file
* Fix tests
* Fix tests
* Set default max request duration to basically infinity for this release for BC
* Address feedback
* Tackle #4929 a different way
This turns c.sealed into an atomic, which allows us to call sealInternal
without a lock. By doing so we can better control lock grabbing when a
condition causing the standby loop to get out of active happens. This
encapsulates that logic into two distinct pieces (although they could
be combined into one), and makes lock guarding more understandable.
* Re-add context canceling to the non-HA version of sealInternal
* Return explicitly after stopCh triggered
1) In backends, ensure they are now using TokenPolicies
2) Don't reassign auth.Policies until after expmgr registration as we
don't need them at that point
Fixes#4829
* Allow max request size to be user-specified
This turned out to be way more impactful than I'd expected because I
felt like the right granularity was per-listener, since an org may want
to treat external clients differently from internal clients. It's pretty
straightforward though.
This also introduces actually using request contexts for values, which
so far we have not done (using our own logical.Request struct instead),
but this allows non-logical methods to still get this benefit.
* Switch to ioutil.ReadAll()
If we have a panic defer functions are run but unlocks aren't. Since we
can't really trust plugins and storage, this backs out the changes for
those parts of the request path.
* This changes the way policies are reported in audit logs.
Previously, only policies tied to tokens would be reported. This could
make it difficult to perform after-the-fact analysis based on both the
initial response entry and further requests. Now, the full set of
applicable policies from both the token and any derived policies from
Identity are reported.
To keep things consistent, token authentications now also return the
full set of policies in api.Secret.Auth responses, so this both makes it
easier for users to understand their actual full set, and it matches
what the audit logs now report.
* Remove a lot of deferred functions in the request path.
There is an interesting benchmark at https://www.reddit.com/r/golang/comments/3h21nk/simple_micro_benchmark_to_measure_the_overhead_of/
It shows that defer actually adds quite a lot of overhead -- maybe 100ns
per call but we defer a *lot* of functions in the request path. So this
removes some of the ones in request handling, ha, barrier, router, and
physical cache.
One meta-note: nearly every metrics function is in a defer which means
every metrics call we add could add a non-trivial amount of time, e.g.
for every 10 extra metrics statements we add 1ms to a request. I don't
know how to solve this right now without doing what I did in some of
these cases and putting that call into a simple function call that then
goes before each return.
* Simplify barrier defer cleanup
* Hand off lease expiration to expiration manager via timers
* Use sync.Map as the cache to track token deletion state
* Add CreateOrFetchRevocationLeaseByToken to hand off token revocation to exp manager
* Update revoke and revoke-self handlers
* Fix tests
* revokeSalted: Move token entry deletion into the deferred func
* Fix test race
* Add blocking lease revocation test
* Remove test log
* Add HandlerFunc on NoopBackend, adjust locks, and add test
* Add sleep to allow for revocations to settle
* Various updates
* Rename some functions and variables to be more clear
* Change step-down and seal to use expmgr for revoke functionality like
during request handling
* Attempt to WAL the token as being invalid as soon as possible so that
further usage will fail even if revocation does not fully complete
* Address feedback
* Return invalid lease on negative TTL
* Revert "Return invalid lease on negative TTL"
This reverts commit a39597ecdc23cf7fc69fe003eef9f10d533551d8.
* Extend sleep on tests
This takes place in two parts, since working on this exposed an issue
with response wrapping when there is a raw body set. The changes are (in
diff order):
* A CurrentWrappingLookupFunc has been added to return the current
value. This is necessary for the lookahead call since we don't want the
lookahead call to be wrapped.
* Support for unwrapping < 0.6.2 tokens via the API/CLI has been
removed, because we now have backends returning 404s with data and can't
rely on the 404 trick. These can still be read manually via
cubbyhole/response.
* KV preflight version request now ensures that its calls is not
wrapped, and restores any given function after.
* When responding with a raw body, instead of always base64-decoding a
string value and erroring on failure, on failure we assume that it
simply wasn't a base64-encoded value and use it as is.
* A test that fails on master and works now that ensures that raw body
responses that are wrapped and then unwrapped return the expected
values.
* A flag for response data that indicates to the wrapping handling that
the data contained therein is already JSON decoded (more later).
* RespondWithStatusCode now defaults to a string so that the value is
HMAC'd during audit. The function always JSON encodes the body, so
before now it was always returning []byte which would skip HMACing. We
don't know what's in the data, so this is a "better safe than sorry"
issue. If different behavior is needed, backends can always manually
populate the data instead of relying on the helper function.
* We now check unwrapped data after unwrapping to see if there were raw
flags. If so, we try to detect whether the value can be unbase64'd. The
reason is that if it can it was probably originally a []byte and
shouldn't be audit HMAC'd; if not, it was probably originally a string
and should be. In either case, we then set the value as the raw body and
hit the flag indicating that it's already been JSON decoded so not to
try again before auditing. Doing it this way ensures the right typing.
* There is now a check to see if the data coming from unwrapping is
already JSON decoded and if so the decoding is skipped before setting
the audit response.
Vishal Nayak