Fix some places where raft wasn't hooking into the core logger as it should.
Revisited the code that was setting the log level to Error during cleanup: it's normal for there to be a bunch of errors then, which makes it harder to see what went wrong up to the point where the test was deemed to have failed. So now, instead of setting log level to Error, we actually stop logging altogether. This only applies if the test didn't pass in its own logger during cluster creation, but we should be moving away from that anyway.
* raft: initial work on raft ha storage support
* add note on join
* add todo note
* raft: add support for bootstrapping and joining existing nodes
* raft: gate bootstrap join by reading leader api address from storage
* raft: properly check for raft-only for certain conditionals
* raft: add bootstrap to api and cli
* raft: fix bootstrap cli command
* raft: add test for setting up new cluster with raft HA
* raft: extend TestRaft_HA_NewCluster to include inmem and consul backends
* raft: add test for updating an existing cluster to use raft HA
* raft: remove debug log lines, clean up verifyRaftPeers
* raft: minor cleanup
* raft: minor cleanup
* Update physical/raft/raft.go
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* Update vault/ha.go
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* Update vault/ha.go
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* Update vault/logical_system_raft.go
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* Update vault/raft.go
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* Update vault/raft.go
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* address feedback comments
* address feedback comments
* raft: refactor tls keyring logic
* address feedback comments
* Update vault/raft.go
Co-authored-by: Alexander Bezobchuk <alexanderbez@users.noreply.github.com>
* Update vault/raft.go
Co-authored-by: Alexander Bezobchuk <alexanderbez@users.noreply.github.com>
* address feedback comments
* testing: fix import ordering
* raft: rename var, cleanup comment line
* docs: remove ha_storage restriction note on raft
* docs: more raft HA interaction updates with migration and recovery mode
* docs: update the raft join command
* raft: update comments
* raft: add missing isRaftHAOnly check for clearing out state set earlier
* raft: update a few ha_storage config checks
* Update command/operator_raft_bootstrap.go
Co-authored-by: Vishal Nayak <vishalnayak@users.noreply.github.com>
* raft: address feedback comments
* raft: fix panic when checking for config.HAStorage.Type
* Update vault/raft.go
Co-authored-by: Alexander Bezobchuk <alexanderbez@users.noreply.github.com>
* Update website/pages/docs/commands/operator/raft.mdx
Co-authored-by: Alexander Bezobchuk <alexanderbez@users.noreply.github.com>
* raft: remove bootstrap cli command
* Update vault/raft.go
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* Update vault/raft.go
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* raft: address review feedback
* raft: revert vendored sdk
* raft: don't send applied index and node ID info if we're HA-only
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
Co-authored-by: Alexander Bezobchuk <alexanderbez@users.noreply.github.com>
Co-authored-by: Vishal Nayak <vishalnayak@users.noreply.github.com>
* move adjustForSealMigration to vault package
* fix adjustForSealMigration
* begin working on new seal migration test
* create shamir seal migration test
* refactor testhelpers
* add VerifyRaftConfiguration to testhelpers
* stub out TestTransit
* Revert "refactor testhelpers"
This reverts commit 39593defd0d4c6fd79aedfd37df6298391abb9db.
* get shamir test working again
* stub out transit join
* work on transit join
* remove debug code
* initTransit now works with raft join
* runTransit works with inmem
* work on runTransit with raft
* runTransit works with raft
* cleanup tests
* TestSealMigration_TransitToShamir_Pre14
* TestSealMigration_ShamirToTransit_Pre14
* split for pre-1.4 testing
* add simple tests for transit and shamir
* fix typo in test suite
* debug wrapper type
* test debug
* test-debug
* refactor core migration
* Revert "refactor core migration"
This reverts commit a776452d32a9dca7a51e3df4a76b9234d8c0c7ce.
* begin refactor of adjustForSealMigration
* fix bug in adjustForSealMigration
* clean up tests
* clean up core refactoring
* fix bug in shamir->transit migration
* stub out test that brings individual nodes up and down
* refactor NewTestCluster
* pass listeners into newCore()
* simplify cluster address setup
* simplify extra test core setup
* refactor TestCluster for readability
* refactor TestCluster for readability
* refactor TestCluster for readability
* add shutdown func to TestCore
* add cleanup func to TestCore
* create RestartCore
* stub out TestSealMigration_ShamirToTransit_Post14
* refactor address handling in NewTestCluster
* fix listener setup in newCore()
* remove unnecessary lock from setSealsForMigration()
* rename sealmigration test package
* use ephemeral ports below 30000
* work on post-1.4 migration testing
* clean up pre-1.4 test
* TestSealMigration_ShamirToTransit_Post14 works for non-raft
* work on raft TestSealMigration_ShamirToTransit_Post14
* clean up test code
* refactor TestClusterCore
* clean up TestClusterCore
* stub out some temporary tests
* use HardcodedServerAddressProvider in seal migration tests
* work on raft for TestSealMigration_ShamirToTransit_Post14
* always use hardcoded raft address provider in seal migration tests
* debug TestSealMigration_ShamirToTransit_Post14
* fix bug in RestartCore
* remove debug code
* TestSealMigration_ShamirToTransit_Post14 works now
* clean up debug code
* clean up tests
* cleanup tests
* refactor test code
* stub out TestSealMigration_TransitToShamir_Post14
* set seals properly for transit->shamir migration
* migrateFromTransitToShamir_Post14 works for inmem
* migrateFromTransitToShamir_Post14 works for raft
* use base ports per-test
* fix seal verification test code
* simplify seal migration test suite
* simplify test suite
* cleanup test suite
* use explicit ports below 30000
* simplify use of numTestCores
* Update vault/external_tests/sealmigration/seal_migration_test.go
Co-authored-by: Calvin Leung Huang <cleung2010@gmail.com>
* Update vault/external_tests/sealmigration/seal_migration_test.go
Co-authored-by: Calvin Leung Huang <cleung2010@gmail.com>
* clean up imports
* rename to StartCore()
* Update vault/testing.go
Co-authored-by: Calvin Leung Huang <cleung2010@gmail.com>
* simplify test suite
* clean up tests
Co-authored-by: Calvin Leung Huang <cleung2010@gmail.com>
* enable seal wrap in all seal migration tests
* move adjustForSealMigration to vault package
* fix adjustForSealMigration
* begin working on new seal migration test
* create shamir seal migration test
* refactor testhelpers
* add VerifyRaftConfiguration to testhelpers
* stub out TestTransit
* Revert "refactor testhelpers"
This reverts commit 39593defd0d4c6fd79aedfd37df6298391abb9db.
* get shamir test working again
* stub out transit join
* work on transit join
* Revert "move resuable storage test to avoid creating import cycle"
This reverts commit b3ff2317381a5af12a53117f87d1c6fbb093af6b.
* remove debug code
* initTransit now works with raft join
* runTransit works with inmem
* work on runTransit with raft
* runTransit works with raft
* get rid of dis-used test
* cleanup tests
* TestSealMigration_TransitToShamir_Pre14
* TestSealMigration_ShamirToTransit_Pre14
* split for pre-1.4 testing
* add simple tests for transit and shamir
* fix typo in test suite
* debug wrapper type
* test debug
* test-debug
* refactor core migration
* Revert "refactor core migration"
This reverts commit a776452d32a9dca7a51e3df4a76b9234d8c0c7ce.
* begin refactor of adjustForSealMigration
* fix bug in adjustForSealMigration
* clean up tests
* clean up core refactoring
* fix bug in shamir->transit migration
* remove unnecessary lock from setSealsForMigration()
* rename sealmigration test package
* use ephemeral ports below 30000
* simplify use of numTestCores
* stub out reusable storage test
* implement reusable inmem test
* work on reusable raft test
* stub out simple raft test
* switch to reusable raft storage
* cleanup tests
* cleanup tests
* refactor tests
* verify raft configuration
* cleanup tests
* stub out reuseStorage
* use common base address across clusters
* attempt to reuse raft cluster
* tinker with test
* fix typo
* start debugging
* debug raft configuration
* add BaseClusterListenPort to TestCluster options
* use BaseClusterListenPort in test
* raft join works now
* misc cleanup of raft tests
* use configurable base port for raft test
* clean up raft tests
* add parallelized tests for all backends
* clean up reusable storage tests
* remove debugging code from startClusterListener()
* improve comments in testhelpers
* improve comments in teststorage
* improve comments and test logging
* fix typo in vault/testing
* fix typo in comments
* remove debugging code
* make number of cores parameterizable in test
* Seal migration after unsealing
* Refactor migration fields migrationInformation in core
* Perform seal migration as part of postUnseal
* Remove the sleep logic
* Use proper seal in the unseal function
* Fix migration from Auto to Shamir
* Fix the recovery config missing issue
* Address the non-ha migration case
* Fix the multi cluster case
* Avoid re-running seal migration
* Run the post migration code in new leaders
* Fix the issue of wrong recovery being set
* Address review feedback
* Add more complete testing coverage for seal migrations. (#8247)
* Add more complete testing coverage for seal migrations. Also remove VAULT_ACC gate from some tests that just depend on docker, cleanup dangling recovery config in storage after migration, and fix a call in adjustCoreForSealMigration that seems broken.
* Fix the issue of wrong recovery key being set
* Adapt tests to work with multiple cores.
* Add missing line to disable raft join.
Co-authored-by: Vishal Nayak <vishalnayak@users.noreply.github.com>
* Fix all known issues
* Remove warning
* Review feedback.
* Revert my previous change that broke raft tests. We'll need to come back and at least comment
this once we better understand why it's needed.
* Don't allow migration between same types for now
* Disable auto to auto tests for now since it uses migration between same types which is not allowed
* Update vault/core.go
Co-Authored-By: Brian Kassouf <briankassouf@users.noreply.github.com>
* Add migration logs
* Address review comments
* Add the recovery config check back
* Skip a few steps if migration is already done
* Return from waitForLeadership if migration fails
Co-authored-by: ncabatoff <nick.cabatoff@gmail.com>
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
because when unsealing it wouldn't wait for core 0 to come up and become
the active node. Much of our testing code assumes that core0 is the
active node.
Shamir seals now come in two varieties: legacy and new-style. Legacy
Shamir is automatically converted to new-style when a rekey operation
is performed. All new Vault initializations using Shamir are new-style.
New-style Shamir writes an encrypted master key to storage, just like
AutoUnseal. The stored master key is encrypted using the shared key that
is split via Shamir's algorithm. Thus when unsealing, we take the key
fragments given, combine them into a Key-Encryption-Key, and use that
to decrypt the master key on disk. Then the master key is used to read
the keyring that decrypts the barrier.
* Initial work
* rework
* s/dr/recovery
* Add sys/raw support to recovery mode (#7577)
* Factor the raw paths out so they can be run with a SystemBackend.
# Conflicts:
# vault/logical_system.go
* Add handleLogicalRecovery which is like handleLogical but is only
sufficient for use with the sys-raw endpoint in recovery mode. No
authentication is done yet.
* Integrate with recovery-mode. We now handle unauthenticated sys/raw
requests, albeit on path v1/raw instead v1/sys/raw.
* Use sys/raw instead raw during recovery.
* Don't bother persisting the recovery token. Authenticate sys/raw
requests with it.
* RecoveryMode: Support generate-root for autounseals (#7591)
* Recovery: Abstract config creation and log settings
* Recovery mode integration test. (#7600)
* Recovery: Touch up (#7607)
* Recovery: Touch up
* revert the raw backend creation changes
* Added recovery operation token prefix
* Move RawBackend to its own file
* Update API path and hit it using CLI flag on generate-root
* Fix a panic triggered when handling a request that yields a nil response. (#7618)
* Improve integ test to actually make changes while in recovery mode and
verify they're still there after coming back in regular mode.
* Refuse to allow a second recovery token to be generated.
* Resize raft cluster to size 1 and start as leader (#7626)
* RecoveryMode: Setup raft cluster post unseal (#7635)
* Setup raft cluster post unseal in recovery mode
* Remove marking as unsealed as its not needed
* Address review comments
* Accept only one seal config in recovery mode as there is no scope for migration
Generalization of the PhysicalFactory notion introduced by Raft, so it can be used by other storage backends in tests. These are the OSS changes needed for my rework of the ent integ tests and cluster helpers.
There are a few different things happening in this change. First, some code that previously lived in enterprise has moved here: this includes some helper code for manipulating clusters and for building storage backends. Second, the existing cluster-building code using inmem storage has been generalized to allow various storage backends. Third, added support for creating two-cluster DR setups. Finally, there are tweaks to handle edge cases that
result in intermittent failures, or to eliminate sleeps in favour of polling to detect state changes.
Also: generalize TestClusterOptions.PhysicalFactory so it can be used either
as a per-core factory (for raft) or a per-cluster factory (for other
storage backends.)
This eliminates a bunch of noise at the end of a test's logs, making it
easier to diagnose test failures.
Add TestCluster.Logger. This is intendend to be used when test helpers
want to log something. If TestClusterOptions.Logger is non-nil, it will
be used as the cluster logger, otherwise we create one based on test
name. In the absence of CoreConfig.Logger, this logger is also used as
the parent of each core's log. This makes it easy when running parallel
tests to identify which log message came from which test.
* upgrade aws roles
* test upgrade aws roles
* Initialize aws credential backend at mount time
* add a TODO
* create end-to-end test for builtin/credential/aws
* fix bug in initializer
* improve comments
* add Initialize() to logical.Backend
* use Initialize() in Core.enableCredentialInternal()
* use InitializeRequest to call Initialize()
* improve unit testing for framework.Backend
* call logical.Backend.Initialize() from all of the places that it needs to be called.
* implement backend.proto changes for logical.Backend.Initialize()
* persist current role storage version when upgrading aws roles
* format comments correctly
* improve comments
* use postUnseal funcs to initialize backends
* simplify test suite
* improve test suite
* simplify logic in aws role upgrade
* simplify aws credential initialization logic
* simplify logic in aws role upgrade
* use the core's activeContext for initialization
* refactor builtin/plugin/Backend
* use a goroutine to upgrade the aws roles
* misc improvements and cleanup
* do not run AWS role upgrade on DR Secondary
* always call logical.Backend.Initialize() when loading a plugin.
* improve comments
* on standbys and DR secondaries we do not want to run any kind of upgrade logic
* fix awsVersion struct
* clarify aws version upgrade
* make the upgrade logic for aws auth more explicit
* aws upgrade is now called from a switch
* fix fallthrough bug
* simplify logic
* simplify logic
* rename things
* introduce currentAwsVersion const to track aws version
* improve comments
* rearrange things once more
* conglomerate things into one function
* stub out aws auth initialize e2e test
* improve aws auth initialize e2e test
* finish aws auth initialize e2e test
* tinker with aws auth initialize e2e test
* tinker with aws auth initialize e2e test
* tinker with aws auth initialize e2e test
* fix typo in test suite
* simplify logic a tad
* rearrange assignment
* Fix a few lifecycle related issues in #7025 (#7075)
* Fix panic when plugin fails to load
* storage/raft: When restoring a snapshot preseal first
* best-effort allow standbys to apply the restoreOp before sealing active node
* Don't cache the raft tls key
* Update physical/raft/raft.go
* Move pending raft peers to core
* Fix race on close bool
* Extend the leaderlease time for tests
* Update raft deps
* Fix audit hashing
* Fix race with auditing
Add support for hashing time.Time within slices, which unbreaks auditing of requests returning the request counters.
Break Hash into struct-specific func like HashAuth, HashRequest. Move all the copying/hashing logic from FormatRequest/FormatResponse into the new Hash* funcs. HashStructure now modifies in place instead of copying.
Instead of returning an error when trying to hash map keys of type time.Time, ignore them, i.e. pass them through unhashed.
Enable auditing on test clusters by default if the caller didn't specify any audit backends. If they do, they're responsible for setting it up.
* Work on raft backend
* Add logstore locally
* Add encryptor and unsealable interfaces
* Add clustering support to raft
* Remove client and handler
* Bootstrap raft on init
* Cleanup raft logic a bit
* More raft work
* Work on TLS config
* More work on bootstrapping
* Fix build
* More work on bootstrapping
* More bootstrapping work
* fix build
* Remove consul dep
* Fix build
* merged oss/master into raft-storage
* Work on bootstrapping
* Get bootstrapping to work
* Clean up FMS and node-id
* Update local node ID logic
* Cleanup node-id change
* Work on snapshotting
* Raft: Add remove peer API (#906)
* Add remove peer API
* Add some comments
* Fix existing snapshotting (#909)
* Raft get peers API (#912)
* Read raft configuration
* address review feedback
* Use the Leadership Transfer API to step-down the active node (#918)
* Raft join and unseal using Shamir keys (#917)
* Raft join using shamir
* Store AEAD instead of master key
* Split the raft join process to answer the challenge after a successful unseal
* get the follower to standby state
* Make unseal work
* minor changes
* Some input checks
* reuse the shamir seal access instead of new default seal access
* refactor joinRaftSendAnswer function
* Synchronously send answer in auto-unseal case
* Address review feedback
* Raft snapshots (#910)
* Fix existing snapshotting
* implement the noop snapshotting
* Add comments and switch log libraries
* add some snapshot tests
* add snapshot test file
* add TODO
* More work on raft snapshotting
* progress on the ConfigStore strategy
* Don't use two buckets
* Update the snapshot store logic to hide the file logic
* Add more backend tests
* Cleanup code a bit
* [WIP] Raft recovery (#938)
* Add recovery functionality
* remove fmt.Printfs
* Fix a few fsm bugs
* Add max size value for raft backend (#942)
* Add max size value for raft backend
* Include physical.ErrValueTooLarge in the message
* Raft snapshot Take/Restore API (#926)
* Inital work on raft snapshot APIs
* Always redirect snapshot install/download requests
* More work on the snapshot APIs
* Cleanup code a bit
* On restore handle special cases
* Use the seal to encrypt the sha sum file
* Add sealer mechanism and fix some bugs
* Call restore while state lock is held
* Send restore cb trigger through raft log
* Make error messages nicer
* Add test helpers
* Add snapshot test
* Add shamir unseal test
* Add more raft snapshot API tests
* Fix locking
* Change working to initalize
* Add underlying raw object to test cluster core
* Move leaderUUID to core
* Add raft TLS rotation logic (#950)
* Add TLS rotation logic
* Cleanup logic a bit
* Add/Remove from follower state on add/remove peer
* add comments
* Update more comments
* Update request_forwarding_service.proto
* Make sure we populate all nodes in the followerstate obj
* Update times
* Apply review feedback
* Add more raft config setting (#947)
* Add performance config setting
* Add more config options and fix tests
* Test Raft Recovery (#944)
* Test raft recovery
* Leave out a node during recovery
* remove unused struct
* Update physical/raft/snapshot_test.go
* Update physical/raft/snapshot_test.go
* fix vendoring
* Switch to new raft interface
* Remove unused files
* Switch a gogo -> proto instance
* Remove unneeded vault dep in go.sum
* Update helper/testhelpers/testhelpers.go
Co-Authored-By: Calvin Leung Huang <cleung2010@gmail.com>
* Update vault/cluster/cluster.go
* track active key within the keyring itself (#6915)
* track active key within the keyring itself
* lookup and store using the active key ID
* update docstring
* minor refactor
* Small text fixes (#6912)
* Update physical/raft/raft.go
Co-Authored-By: Calvin Leung Huang <cleung2010@gmail.com>
* review feedback
* Move raft logical system into separate file
* Update help text a bit
* Enforce cluster addr is set and use it for raft bootstrapping
* Fix tests
* fix http test panic
* Pull in latest raft-snapshot library
* Add comment
ncabatoff