* Add 'plugin list' command
* Add 'plugin register' command
* Add 'plugin deregister' command
* Use a shared plugin helper
* Add 'plugin read' command
* Rename to plugin info
* Add base plugin for help text
* Fix arg ordering
* Add docs
* Rearrange to alphabetize
* Fix arg ordering in example
* Don't use "sudo" in command description
* Add description flag to secrets and auth tune subcommands
* Allow empty description to be provided in secret and auth mount tune
* Use flagNameDescription
This change makes it so that if a lease is revoked through user action,
we set the expiration time to now and update pending, just as we do with
tokens. This allows the normal retry logic to apply in these cases as
well, instead of just erroring out immediately. The idea being that once
you tell Vault to revoke something it should keep doing its darndest to
actually make that happen.
* This changes the way policies are reported in audit logs.
Previously, only policies tied to tokens would be reported. This could
make it difficult to perform after-the-fact analysis based on both the
initial response entry and further requests. Now, the full set of
applicable policies from both the token and any derived policies from
Identity are reported.
To keep things consistent, token authentications now also return the
full set of policies in api.Secret.Auth responses, so this both makes it
easier for users to understand their actual full set, and it matches
what the audit logs now report.
* Redo API client locking
This assigns local values when in critical paths, allowing a single API
client to much more quickly and safely pipeline requests.
Additionally, in order to take that paradigm all the way it changes how
timeouts are set. It now uses a context value set on the request instead
of configuring the timeout in the http client per request, which was
also potentially quite racy.
Trivially tested with
VAULT_CLIENT_TIMEOUT=2 vault write pki/root/generate/internal key_type=rsa key_bits=8192
This takes place in two parts, since working on this exposed an issue
with response wrapping when there is a raw body set. The changes are (in
diff order):
* A CurrentWrappingLookupFunc has been added to return the current
value. This is necessary for the lookahead call since we don't want the
lookahead call to be wrapped.
* Support for unwrapping < 0.6.2 tokens via the API/CLI has been
removed, because we now have backends returning 404s with data and can't
rely on the 404 trick. These can still be read manually via
cubbyhole/response.
* KV preflight version request now ensures that its calls is not
wrapped, and restores any given function after.
* When responding with a raw body, instead of always base64-decoding a
string value and erroring on failure, on failure we assume that it
simply wasn't a base64-encoded value and use it as is.
* A test that fails on master and works now that ensures that raw body
responses that are wrapped and then unwrapped return the expected
values.
* A flag for response data that indicates to the wrapping handling that
the data contained therein is already JSON decoded (more later).
* RespondWithStatusCode now defaults to a string so that the value is
HMAC'd during audit. The function always JSON encodes the body, so
before now it was always returning []byte which would skip HMACing. We
don't know what's in the data, so this is a "better safe than sorry"
issue. If different behavior is needed, backends can always manually
populate the data instead of relying on the helper function.
* We now check unwrapped data after unwrapping to see if there were raw
flags. If so, we try to detect whether the value can be unbase64'd. The
reason is that if it can it was probably originally a []byte and
shouldn't be audit HMAC'd; if not, it was probably originally a string
and should be. In either case, we then set the value as the raw body and
hit the flag indicating that it's already been JSON decoded so not to
try again before auditing. Doing it this way ensures the right typing.
* There is now a check to see if the data coming from unwrapping is
already JSON decoded and if so the decoding is skipped before setting
the audit response.
* Allow returning list information and other data in 404s.
On read it'll output data and/or warnings on a 404 if they exist. On
list, the same behavior; the actual 'vault list' command doesn't change
behavior though in terms of output unless there are no actual keys (so
it doesn't just magically show other data).
This corrects some assumptions in response_util and wrapping.go; it also
corrects a few places in the latter where it could leak a (useless)
token in some error cases.
* Use same 404 logic in delete/put too
* Add the same secret parsing logic to the KV request functions
This PR fixes the error handling in the api packages logical.Unwrap
method. Previously if there was an error making the request to Vault,
the error was only returned if there was an HTTP response and the status
code was not a 404.
The new code returns all errors but does special case handling if the
response code is a 404.
* logbridge with hclog and identical output
* Initial search & replace
This compiles, but there is a fair amount of TODO
and commented out code, especially around the
plugin logclient/logserver code.
* strip logbridge
* fix majority of tests
* update logxi aliases
* WIP fixing tests
* more test fixes
* Update test to hclog
* Fix format
* Rename hclog -> log
* WIP making hclog and logxi love each other
* update logger_test.go
* clean up merged comments
* Replace RawLogger interface with a Logger
* Add some logger names
* Replace Trace with Debug
* update builtin logical logging patterns
* Fix build errors
* More log updates
* update log approach in command and builtin
* More log updates
* update helper, http, and logical directories
* Update loggers
* Log updates
* Update logging
* Update logging
* Update logging
* Update logging
* update logging in physical
* prefixing and lowercase
* Update logging
* Move phyisical logging name to server command
* Fix som tests
* address jims feedback so far
* incorporate brians feedback so far
* strip comments
* move vault.go to logging package
* update Debug to Trace
* Update go-plugin deps
* Update logging based on review comments
* Updates from review
* Unvendor logxi
* Remove null_logger.go
* Add some requirements for versioned k/v
* Add a warning message when an upgrade is triggered
* Add path help values
* Make the kv header a const
* Add the uid to mount entry instead of options map
* Pass the backend aware uuid to the mounts and plugins
* Fix comment
* Add options to secret/auth enable and tune CLI commands (#4170)
* Switch mount/tune options to use TypeKVPairs (#4171)
* switching options to TypeKVPairs, adding bool parse for versioned flag
* flipping bool check
* Fix leases coming back from non-leased pluin kv store
* add a test for updating mount options
* Fix tests
* Add audit hmac values to AuthConfigInput and AuthConfigOutput, fix docs
* docs: Add ttl params to auth enable endpoint
* Rewording of go string to simply string
* Add audit hmac keys as CLI flags on auth/secrets enable
* Fix copypasta mistake
* WIP on auth-list endpoint
* Rename variable to be singular, add CLI flag, show value in auth and secrets list
* Add audit hmac keys to auth and secrets list
* Only set config values if they exist
* Fix http sys/auth tests
* More auth plugin_name test fixes
* Rename tag internal_ui_show_mount to _ui_show_mount
* Add tests
* Make endpoint unauthed
* Rename field to listing_visibility
* Add listing-visibility to cli tune commands
* Use ListingVisiblityType
* Fix type conversion
* Do not actually change token's value on testHttpGet
* Remove unused ListingVisibilityAuth, use const in pathInternalUIMountsRead
* Add grace period calculation logic to renewer
* Update lease renewer logic.
It is believed by myself and members of the Nomad team that this logic
should be much more robust in terms of causing large numbers of new
secret acquisitions caused by a static grace period. See comments in the
code for details.
Fixes#3414
* Fix some commenting and fix tests
* Add more time to test so that integ tests don't time out
* Fix some review feedback
* Add audit hmac values to AuthConfigInput and AuthConfigOutput, fix docs
* docs: Add ttl params to auth enable endpoint
* Rewording of go string to simply string
* Add audit hmac keys as CLI flags on auth/secrets enable
* Fix copypasta mistake
* Add audit hmac keys to auth and secrets list
* Only set config values if they exist
* Fix http sys/auth tests
* More auth plugin_name test fixes
* Pass API values into MountEntry's config when creating auth/secrets mount
* Update usage wording
* Use Colored UI if stdout is a tty
* Add format options to operator unseal
* Add format test on operator unseal
* Add -no-color output flag, and use BasicUi if no-color flag is provided
* Move seal status formatting logic to OutputSealStatus
* Apply no-color to warnings from DeprecatedCommands as well
* Add OutputWithFormat to support arbitrary data, add format option to auth list
* Add ability to output arbitrary list data on TableFormatter
* Clear up switch logic on format
* Add format option for list-related commands
* Add format option to rest of commands that returns a client API response
* Remove initOutputYAML and initOutputJSON, and use OutputWithFormat instead
* Remove outputAsYAML and outputAsJSON, and use OutputWithFormat instead
* Remove -no-color flag, use env var exclusively to toggle colored output
* Fix compile
* Remove -no-color flag in main.go
* Add missing FlagSetOutputFormat
* Fix generate-root/decode test
* Migrate init functions to main.go
* Add no-color flag back as hidden
* Handle non-supported data types for TableFormatter.OutputList
* Pull formatting much further up to remove the need to use c.flagFormat (#3950)
* Pull formatting much further up to remove the need to use c.flagFormat
Also remove OutputWithFormat as the logic can cause issues.
* Use const for env var
* Minor updates
* Remove unnecessary check
* Fix SSH output and some tests
* Fix tests
* Make race detector not run on generate root since it kills Travis these days
* Update docs
* Update docs
* Address review feedback
* Handle --format as well as -format
* Redo the API client quite a bit to make the behavior of NewClient more
predictable and add locking to make it safer to use with Clone() and if
multiple goroutines for some reason decide to change things.
Along the way I discovered that currently, the x/net/http2 package is
broke with the built-in h2 support in released Go. For those using
DefaultConfig (the vast majority of cases) this will be a non-event.
Others can manually call http2.ConfigureTransport as needed. We should
keep an eye on commits on that repo and consider more updates before
release. Alternately we could go back revisions but miss out on bug
fixes; my theory is that this is not a purposeful break and I'll be
following up on this in the Go issue tracker.
In a few tests that don't use NewTestCluster, either for legacy or other
reasons, ensure that http2.ConfigureTransport is called.
* Use tls config cloning
* Don't http2.ConfigureServer anymore as current Go seems to work properly without requiring the http2 package
* Address feedback
This removes all references I could find to:
- credential provider
- authentication backend
- authentication provider
- auth provider
- auth backend
in favor of the unified:
- auth method
* Store original request path in WrapInfo as CreationPath
* Add wrapping_token_creation_path to CLI output
* Add CreationPath to AuditResponseWrapInfo
* Fix tests
* Add and fix tests, update API docs with new sample responses
* Have sys health api always return even in an error case, which HTTP API docs say it should
* Use specific return codes to bypass automatic error handling
* Add backend plugin changes
* Fix totp backend plugin tests
* Fix logical/plugin InvalidateKey test
* Fix plugin catalog CRUD test, fix NoopBackend
* Clean up commented code block
* Fix system backend mount test
* Set plugin_name to omitempty, fix handleMountTable config parsing
* Clean up comments, keep shim connections alive until cleanup
* Include pluginClient, disallow LookupPlugin call from within a plugin
* Add wrapper around backendPluginClient for proper cleanup
* Add logger shim tests
* Add logger, storage, and system shim tests
* Use pointer receivers for system view shim
* Use plugin name if no path is provided on mount
* Enable plugins for auth backends
* Add backend type attribute, move builtin/plugin/package
* Fix merge conflict
* Fix missing plugin name in mount config
* Add integration tests on enabling auth backend plugins
* Remove dependency cycle on mock-plugin
* Add passthrough backend plugin, use logical.BackendType to determine lease generation
* Remove vault package dependency on passthrough package
* Add basic impl test for passthrough plugin
* Incorporate feedback; set b.backend after shims creation on backendPluginServer
* Fix totp plugin test
* Add plugin backends docs
* Fix tests
* Fix builtin/plugin tests
* Remove flatten from PluginRunner fields
* Move mock plugin to logical/plugin, remove totp and passthrough plugins
* Move pluginMap into newPluginClient
* Do not create storage RPC connection on HandleRequest and HandleExistenceCheck
* Change shim logger's Fatal to no-op
* Change BackendType to uint32, match UX backend types
* Change framework.Backend Setup signature
* Add Setup func to logical.Backend interface
* Move OptionallyEnableMlock call into plugin.Serve, update docs and comments
* Remove commented var in plugin package
* RegisterLicense on logical.Backend interface (#3017)
* Add RegisterLicense to logical.Backend interface
* Update RegisterLicense to use callback func on framework.Backend
* Refactor framework.Backend.RegisterLicense
* plugin: Prevent plugin.SystemViewClient.ResponseWrapData from getting JWTs
* plugin: Revert BackendType to remove TypePassthrough and related references
* Fix typo in plugin backends docs
* Set number of pester retries to zero by default and make seal command return 403 if unauthorized instead of 500
* Fix build
* Use 403 instead and update test
* Change another 500 to 403
* Provide base64 keys in addition to hex encoded.
Accept these at unseal/rekey time.
Also fix a bug where backup would not be honored when doing a rekey with
no operation currently ongoing.
This should help with transient issues. Full control over min/max delays
and number of retries (and ability to turn off) is provided in the API
and via env vars.
Fix tests.
This makes it easier to understand the expected lifetime without a
lookup call that uses the single use left on the token.
This also adds a couple of safety checks and for JSON uses int, rather
than int64, for the TTL for the wrapped token.
In some situations, it can be impossible to revoke leases (for instance,
if someone has gone and manually removed users created by Vault). This
can not only cause Vault to cycle trying to revoke them, but it also
prevents mounts from being unmounted, leaving them in a tainted state
where the only operations allowed are to revoke (or rollback), which
will never successfully complete.
This adds a new endpoint that works similarly to `revoke-prefix` but
ignores errors coming from a backend upon revocation (it does not ignore
errors coming from within the expiration manager, such as errors
accessing the data store). This can be used to force Vault to abandon
leases.
Like `revoke-prefix`, this is a very sensitive operation and requires
`sudo`. It is implemented as a separate endpoint, rather than an
argument to `revoke-prefix`, to ensure that control can be delegated
appropriately, as even most administrators should not normally have
this privilege.
Fixes#1135
This endpoint causes the node it's hit to step down from active duty.
It's a noop if the node isn't active or not running in HA mode. The node
will wait one second before attempting to reacquire the lock, to give
other nodes a chance to grab it.
Fixes#1093
When working on the Terraform / Vault integration I came across the fact
that `Sys().MountConfig(...)` didn't seem to return a response struct,
even though it's a `GET` method.
Looks like just a simple oversight to me. This fix does break API BC,
but the method had no use without its return value so I feel like that's
probably a mitigating factor.
backends for the moment. This is pretty simple; it just adds the actual
capability to make a list call into both the CLI and the HTTP handler.
The real meat was already in those backends.
with a new endpoint '/sys/audit-hash', which returns the given input
string hashed with the given audit backend's hash function and salt
(currently, always HMAC-SHA256 and a backend-specific salt).
In the process of adding the HTTP handler, this also removes the custom
HTTP handlers for the other audit endpoints, which were simply
forwarding to the logical system backend. This means that the various
audit functions will now redirect correctly from a standby to master.
(Tests all pass.)
Fixes#784
This allows the same environment variables to be read, parsed, and used
from any API client as was previously handled in the CLI. The CLI now
uses the API environment variable reading capability, then overrides any
values from command line flags, if necessary.
Fixes#618
This strips out http.DefaultClient everywhere I could immediately find
it. Too many things use it and then modify it in incompatible ways.
Fixes#700, I believe.
Vault doesn't generate these, but in some cases Go's internal HTTP
handler does. For instance, during a mount-tune command, finishing the
mount path with / (as in secret/) would cause the final URL path to
contain .../mounts/secret//tune. The double slash would trigger this
behavior in Go's handler and generate a 301. Since Vault generates 307s,
this would cause the client to think that everything was okay when in
fact nothing had happened.
marshalled into JSON or displayed from the CLI depending on the output
mode. This allows conferring information such as "no such policy exists"
when creating a token -- not an error, but something the user should be
aware of.
Fixes#676
up-to-date information. This allows remount to be implemented with the
same source and dest, allowing mount options to be changed on the fly.
If/when Vault gains the ability to HUP its configuration, this should
just work for the global values as well.
Need specific unit tests for this functionality.
create our own. This avoids some potential client race conditions when
they are setting values on the Vault API client while the default client
is being used elsewhere in other goroutines, as was seen in
consul-template.
Jeff Mitchell