* Rename common.go->healthcheck.go
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Push handling of no resources to the health checks
This allows us to better run on empty mounts.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Exit when no issuers are found
This makes health checks less useful.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add additional test criteria, refactor tests
This will allow us to setup more tests.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add more OK statuses when checks are good
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test cases for all bad results
The test for too-many-certs was elided for now due to being too hard to
setup in CI.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test for missing mount
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add expected failure test on empty mount
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test for only having an issuer in the mount
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* More consistently perform permission checks
Also return them to the caller when they're relevant.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test without token
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Run health check tests in parallel
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update command/healthcheck/healthcheck.go
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Update command/healthcheck/healthcheck.go
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Add shared helpers across health checks
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add audit_visibility health check
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add allow_if_modified_since health check
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add mount-related health checks to CLI
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rename fetch helpers
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Soften language around managed key roots
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add enable_auto_tidy health check
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tidy_last_run health check
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add too_many_certs health check
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tidy, CRL, cert count checks to CLI
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Cache stored leaf cert count
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly parse last run
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add more PKI related common utilities
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add role_allows_localhost health check
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add role_allows_glob_wildcards health checks
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add role_no_store_false health check
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add new checks to the CLI
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Switch to new guard style
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Provision role for test
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address review feedback
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix invalid version check
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix message with auto-rebuild enabled
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
We previously tried to extract this log into a function (shouldExit),
but semgrep doesn't expand function invocations, leading us to be forced
to add another rule to the regex.
Instead, add the extraneous `err != nil` conditional into the if
statements, even though skip/err should always be true in these cases
and it should never be evaluated.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add hardware_backed_root health check
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add root_issued_leaves health check
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add new health checks to CLI
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add more helpers to common PKI health-check code
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Show config when listing, stable output order
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix %v->%w
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Stub out initial health check command
This command will be used to generate health check results for the PKI
engine.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Start common health check implementation
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add common health check utilities
These utilities will collect helpers not specific to PKI health checks,
such as formatting longer durations more legibly.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add PKI health check common utils
Many health checks will need issuer and/or CRL information in order to
execute. We've centrally located these helpers to avoid particular
health checks from needing to reimplement them each time.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Adding ca_validity_period health check
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Begin using health-checks in PKI command
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow parsing raw requests afterwards
This shifts the last of the logic difference between Read(...) and
ReadRaw(...) to a new helper, allowing ReadRaw(...) requests to be
parsed into the same response structure afterwards as Read(...); this
allows API callers to fetch the raw secret and inspect the raw response
object in case something went wrong (error code &c) -- and when the
request succeeds, they can still get the api.Secret out.
This will be used with the PKI health check functionality, making both
LIST and READ operations use ReadRaw, and optionally parsing the secret
afterwards.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add crl_validity_period health check
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for PKI health check
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix bug in raw reading with contexts
When reading raw objects, don't manually call the context cancellation:
this causes timeouts and/or EOF errors when attempting to read or parse
the response body. See message in client.RawRequestWithContext(...) for
more information.
This was causing the test suite to randomly fail, due to the context
cancelling. The test suite's client usually had a default timeout,
whereas the CLI didn't, and thus didn't exhibit the same issue.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix typo in permissions message
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Move %v->%w for errs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Export CreateBackendWithStorage for pkiext
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Move zlint_test.go to pkiext
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix mount all test to ignore pkiext
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Started work on adding log-file support to Agent
* Allow log file to be picked up and appended
* Use NewLogFile everywhere
* Tried to pull out the config aggregation from Agent.Run
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
When running the test suite in CI (where requests are centralized from
relatively few IPs), we'd occasionally hit Dockerhub's rate limits.
Luckily Hashicorp runs a (limited) public mirror of the containers we
need, so we can switch to them here in the tests.
For consistency between developer and CI, we've opted to have the tests
always pull from the Hashicorp mirror, rather than updating the CI
runner to prefer the mirror.
We exclude nomad and influxdb as we don't presently mirror these repos.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify when -format=raw fails
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Document Vault read's new -format=raw mode
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add raw format to usage, completion
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing support for raw format field printing
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Prohibit command execution with wrong formatter
This allows us to restrict the raw formatter to only commands that
understand it; otherwise, when running `vault write -format=raw`, we'd
actually hit the Vault server, but hide the output from the user. By
switching this to a flag-parse time check, we avoid running the rest of
the command if a bad formatter was specified.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Expose raw request from client.Logical()
Not all Vault API endpoints return well-formatted JSON objects.
Sometimes, in the case of the PKI secrets engine, they're not even
printable (/pki/ca returns a binary (DER-encoded) certificate). While
this endpoint isn't authenticated, in general the API caller would
either need to use Client.RawRequestWithContext(...) directly (which
the docs advise against), or setup their own net/http client and
re-create much of Client and/or Client.Logical.
Instead, exposing the raw Request (via the new ReadRawWithData(...))
allows callers to directly consume these non-JSON endpoints like they
would nearly any other endpoint.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add raw formatter for direct []byte data
As mentioned in the previous commit, some API endpoints return non-JSON
data. We get as far as fetching this data (via client.Logical().Read),
but parsing it as an api.Secret fails (as in this case, it is non-JSON).
Given that we intend to update `vault read` to support such endpoints,
we'll need a "raw" formatter that accepts []byte-encoded data and simply
writes it to the UI.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add support for reading raw API endpoints
Some endpoints, such as `pki/ca` and `pki/ca/pem` return non-JSON
objects. When calling `vault read` on these endpoints, an error
is returned because they cannot be parsed as api.Secret instances:
> Error reading pki/ca/pem: invalid character '-' in numeric literal
Indeed, we go to all the trouble of (successfully) fetching this value,
only to be unable to Unmarshal into a Secrets value. Instead, add
support for a new -format=raw option, allowing these endpoints to be
consumed by callers of `vault read` directly.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove panic
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Store login MFA secret with tokenhelper
* Clean up and refactor tokenhelper paths
* Refactor totp test code for re-use
* Add login MFA command tests
* Use longer sleep times and sha512 for totp test
* Add changelog
Vault's new TLS devvault mode has two nits with certificate
construction:
1. The CA doesn't need to include any SANs, as these aren't checked.
Technically this means the CA could be reused as a leaf certificate
for the one specified IP SAN, which is less desirable.
2. Add hostname to SANs in addition to CNs. This is a best practice, as
(when the CN is a hostname), it is preferable to have everything in
SANs as well.
Neither of these are major changes.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add patch support to CLI
This is based off the existing write command, using the
JSONMergePatch(...) API client method rather than Write(...), allowing
us to update specific fields.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on PATCH support
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
This fixes a couple of references to loop variables in parallel tests
and deferred functions. When running a parallel test (calling
`t.Parallel()`) combined with the table-driven pattern, it's necessary
to copy the test case loop variable, otherwise only the last test case
is exercised. This is documented in the `testing` package:
https://pkg.go.dev/testing#hdr-Subtests_and_Sub_benchmarks
`defer` statements that invoke a closure should also not reference a
loop variable directly as the referenced value will change in each
iteration of the loop.
Issues were automatically found with the `loopvarcapture` linter.
* Added flag and env var which will disable client redirection
* Added changelog
* Docs fix for unsaved file, and test single request made
* Updated test for case when redirect is enabled, updated docs based on suggestions
* Write explicit -help output to stdout
Per the consensus of most programs, and mirroring the GNU Coding
Standards for CLI design, when users request -help explicitly via the
CLI, this should be written to stdout to allow paging of output. stderr
is fine when an invalid usage triggers the help text however.
In our case, mitchellh/cli helpfully adds a HelpWriter that we
previously set to stderr explicitly. This writer is only called to print
user-requested help text; it is not called on error cases (e.g., bad
usage triggering additional help text to the user).
Thus it should safely be settable to stdout, enabling pagers without
additional redirects.
Notably, we do have to set ErrorWriter as it defaults to initializing to
the value of HelpWriter, which we want to set to stdout now, which is
less useful.
See also: https://www.gnu.org/prep/standards/html_node/_002d_002dhelp.htmlResolves: #17004
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add -plugin-version flag to vault auth/secrets tune
* CLI tests for auth/secrets tune
* CLI test for plugin register
* Plugin catalog listing bug where plugins of different type with the same name could be double counted
* Use constant for -plugin-version flag name
