* Allow unification of revocations on other clusters
If a BYOC revocation occurred on cluster A, while the cert was initially
issued and stored on cluster B, we need to use the invalidation on the
unified entry to detect this: the revocation queues only work for
non-PoP, non-BYOC serial only revocations and thus this BYOC would be
immediately accepted on cluster A. By checking all other incoming
revocations for duplicates on a given cluster, we can ensure that
unified revocation is consistent across clusters.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use time-of-use locking for global revocation processing
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Unified revocation migration code
- Add a periodic function that will list the local revocations
and if any are missing from the unified revocation area will
force a write to the unified revocation folder/remote instance.
* PR Feedback
- Do not transfer expired certificates to unified space from local
- Move new periodic code into a periodic.go file
- Add a flag so we only run this stuff once if all is good, with
a force flag if we encounter errors or if unified_crl is toggled
on
* PR feedback take 2
* Add unified CRL config storage helpers
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add support to build unified CRLs
This allows us to build unified versions of both the complete and delta
CRLs. This mostly involved creating a new variant of the
unified-specific CRL builder, fetching certs from each cluster's storage
space.
Unlike OCSP, here we do not unify the node's local storage with the
cross-cluster storage: this node is the active of the performance
primary, so writes to unified storage happen exactly the same as
writes to cluster-local storage, meaning the two are always in
sync. Other performance secondaries do not rebuild the CRL, and hence
the out-of-sync avoidance that we'd like to solve with the OCSP
responder is not necessary to solve here.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add ability to fetch unified CRLs
This adds to the path-fetch APIs the ability to return the unified CRLs.
We update the If-Modified-Since infrastructure to support querying the
unified CRL specific data and fetchCertBySerial to support all unified
variants. This works for both the default/global fetch APIs and the
issuer-specific fetch APIs.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rebuild CRLs on unified status changes
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Handle rebuilding CRLs due to either changing
This allows detecting if the Delta CRL needs to be rebuilt because
either the local or the unified CRL needs to be rebuilt. We never
trigger rebuilding the unified delta on a non-primary cluster.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure serials aren't added to unified CRL twice
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Write delta WAL entries for unified CRLs
When we'd ordinarily write delta WALs for local CRLs, we also need to
populate the cross-cluster delta WAL. This could cause revocation to
appear to fail if the two clusters are disconnected, but notably regular
cross-cluster revocation would also fail.
Notably, this commit also changes us to not write Delta WALs when Delta
CRLs is disabled (versus previously doing it when auto rebuild is
enabled in case Delta CRLs were later asked for), and instead,
triggering rebuilding a complete CRL so we don't need up-to-date Delta
WAL info.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update IMS test for forced CRL rebuilds
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Move comment about perf-primary only invalidation
Also remove noisy debug log.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove more noisy log statements during queue
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Skip revocation entries from our current cluster
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add locking and comment about tidying revoke queue
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Switch to time.Since for tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor tidyStatuses into path_tidy.go
Leaving these in backend.go often causes us to miss adding useful values
to tidyStatus when we add a new config parameter.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Track the number of deleted revocation request
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow tidy to remove confirmed revocation requests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing field to tidy test
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add global, cross-cluster revocation queue to PKI
This adds a global, cross-cluster replicated revocation queue, allowing
operators to revoke certificates by serial number across any cluster. We
don't support revoking with private key (PoP) in the initial
implementation.
In particular, building on the PBPWF work, we add a special storage
location for handling non-local revocations which gets replicated up to
the active, primary cluster node and back down to all secondary PR
clusters. These then check the pending revocation entry and revoke the
serial locally if it exists, writing a cross-cluster confirmation entry.
Listing capabilities are present under pki/certs/revocation-queue,
allowing operators to see which certs are present. However, a future
improvement to the tidy subsystem will allow automatic cleanup of stale
entries.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow tidying revocation queue entries
No manual operator control of revocation queue entries are allowed.
However, entries are stored with their request time, allowing tidy to,
after a suitable safety buffer, remove these unconfirmed and presumably
invalid requests.
Notably, when a cluster goes offline, it will be unable to process
cross-cluster revocations for certificates it holds. If tidy runs,
potentially valid revocations may be removed. However, it is up to the
administrator to ensure the tidy window is sufficiently long that any
required maintenance is done (or, prior to maintenance when an issue is
first noticed, tidy is temporarily disabled).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Only allow enabling global revocation queue on Vault Enterprise
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use a locking queue to handle revocation requests
This queue attempts to guarantee that PKI's invalidateFunc won't have
to wait long to execute: by locking only around access to the queue
proper, and internally using a list, we minimize the time spent locked,
waiting for queue accesses.
Previously, we held a lock during tidy and processing that would've
prevented us from processing invalidateFunc calls.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* use_global_queue->cross_cluster_revocation
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Grab revocation storage lock when processing queue
We need to grab the storage lock as we'll actively be revoking new
certificates in the revocation queue. This ensures nobody else is
competing for storage access, across periodic funcs, new revocations,
and tidy operations.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix expected tidy status test
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow probing RollbackManager directly in tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address review feedback on revocationQueue
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add more cancel checks, fix starting manual tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor CRL building into separate functions
This will allow us to add the ability to add and build a unified CRL
across all clusters, reusing logic that is common to both, but letting
each have their own certificate lists.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rename localCRLConfigEntry->internalCRLConfigEntry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rename Delta WALs to Local Delta WALs
This adds clarity that we'll have a separate local and remote Delta CRL
and WALs for each.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow tidy to backup legacy CA bundles
With the new tidy_move_legacy_ca_bundle option, we'll use tidy to move
the legacy CA bundle from /config/ca_bundle to /config/ca_bundle.bak.
This does two things:
1. Removes ca_bundle from the hot-path of initialization after initial
migration has completed. Because this entry is seal wrapped, this
may result in performance improvements.
2. Allows recovery of this value in the event of some other failure
with migration.
Notably, this cannot occur during migration in the unlikely (and largely
unsupported) case that the operator immediately downgrades to Vault
<1.11.x. Thus, we reuse issuer_safety_buffer; while potentially long,
tidy can always be run manually with a shorter buffer (and only this
flag) to manually move the bundle if necessary.
In the event of needing to recover or undo this operation, it is
sufficient to use sys/raw to read the backed up value and subsequently
write it to its old path (/config/ca_bundle).
The new entry remains seal wrapped, but otherwise isn't used within the
code and so has better performance characteristics.
Performing a fat deletion (DELETE /root) will again remove the backup
like the old legacy bundle, preserving its wipe characteristics.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation about new tidy parameter
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for migration scenarios
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clean up time comparisons
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
A lot of places took a (context, backend, request) tuple, ignoring the
request proper and only using it for its storage. This (modified) tuple
is exactly the set of elements in the shared storage context, so we
should be using that instead of manually passing all three elements
around.
This simplifies a few places where we'd generate a storage context at
the request level and then split it apart only to recreate it again
later (e.g., CRL building).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow templating of cluster-local AIA URIs
This adds a new configuration path, /config/cluster, which retains
cluster-local configuration. By extending /config/urls and its issuer
counterpart to include an enable_templating parameter, we can allow
operators to correctly identify the particular cluster a cert was
issued on, and tie its AIA information to this (cluster, issuer) pair
dynamically.
Notably, this does not solve all usage issues around AIA URIs: the CRL
and OCSP responder remain local, meaning that some merge capability is
required prior to passing it to other systems if they use CRL files and
must validate requests with certs from any arbitrary PR cluster.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation about templated AIAs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* AIA URIs -> AIA URLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* issuer.AIAURIs might be nil
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow non-nil response to config/urls
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Always validate URLs on config update
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure URLs lack templating parameters
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Review feedback
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* New PKI API to generate and sign a CRL based on input data
- Add a new PKI API that allows an end-user to feed in all the
information required to generate and sign a CRL by a given issuer.
- This is pretty powerful API allowing an escape hatch for 3rd parties
to craft customized CRLs with extensions based on their individual
needs
* Add api-docs and error if reserved extension is provided as input
* Fix copy/paste error in Object Identifier constants
* Return nil on errors instead of partially filled slices
* Add cl
* Add new PKI api to combine and sign different CRLs from the same issuer
- Add a new PKI api /issuer/<issuer ref>/resign-crls that will allow
combining and signing different CRLs that were signed by the same
issuer.
- This allows external actors to combine CRLs into a single CRL across
different Vault clusters that share the CA certificate and key material
such as performance replica clusters and the primary cluster
* Update API docs
* PR Feedback - Delta CRL rename
* Update to latest version of main
* PR Feedback - Get rid of the new caEntry struct
* Address PR feedback in api-docs and PEM encoded response
* Add automatic tidy of expired issuers
To aid PKI users like Consul, which periodically rotate intermediates,
and provided a little more consistency with older versions of Vault
which would silently (and dangerously!) replace the configured CA on
root/intermediate generation, we introduce an automatic tidy of expired
issuers.
This includes a longer safety buffer (1 year) and logging of the
relevant issuer information prior to deletion (certificate contents, key
ID, and issuer ID/name) to allow admins to recover this value if
desired, or perform further cleanup of keys.
From my PoV, removal of the issuer is thus a relatively safe operation
compared to keys (which I do not feel comfortable removing) as they can
always be re-imported if desired. Additionally, this is an opt-in tidy
operation, not enabled by default. Lastly, most major performance
penalties comes with lots of issuers within the mount, not as much
large numbers of keys (as only new issuer creation/import operations are
affected, unlike LIST /issuers which is a public, unauthenticated
endpoint).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test for tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs on tidy of issuers
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Restructure logging
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing fields to expected tidy output
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Also remove one duplicate error masked by return.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add new API to PKI to list revoked certificates
- A new API that will return the list of serial numbers of
revoked certificates on the local cluster.
* Add cl
* PR feedback
Basics of Cert-Count Telemetry, changelog, "best attempt" slice to capture (and test for) duplicates, Move sorting of possibleDoubleCountedRevokedSerials to after compare of entries. Add values to counter when still initializing.
Set lists to nil after use, Fix atomic2 import, Delay reporting metrics until after deduplication has completed,
The test works now, Move string slice to helper function; Add backendUUID to gauge name.
* Don't race for CRL rebuilding capability check
Core has recently seen some data races during SystemView/replication
updates between them and the PKI subsystem. This is because this
SystemView access occurs outside of a request (during invalidation
handling) and thus the proper lock isn't held.
Because replication status cannot change within the lifetime of a plugin
(and instead, if a node switches replication status, the entire plugin
instance will be torn down and recreated), it is safe to cache this
once, at plugin startup, and use it throughout its lifetime.
Thus, we replace this SystemView access with a stored boolean variable
computed ahead of time.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update builtin/logical/pki/backend.go
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add path to manually rebuild delta CRLs
The crl/rotate-delta path behaves like crl/rotate, triggering a
cluster-local rebuild of just the delta CRL. This is useful for when
delta CRLs are enabled with a longer-than-desired auto-rebuild period
after some high-profile revocations occur.
In the event delta CRLs are not enabled, this becomes a no-op.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for Delta CRL rebuilding
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update documentation about Delta CRLs
Also fixes a omission in the If-Modified-Since docs to mention that the
response header should probably also be passed through.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow tidy operations to be cancelled
When tidy operations take a long time to execute (and especially when
executing them automatically), having the ability to cancel them becomes
useful to reduce strain on Vault clusters (and let them be rescheduled
at a later time).
To this end, we add the /tidy-cancel write endpoint.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing auto-tidy synopsis / description
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add a pause duration between tidying certificates
By setting pause_duration, operators can have a little control over the
resource utilization of a tidy operation. While the list of certificates
remain in memory throughout the entire operation, a pause is added
between processing certificates and the revocation lock is released.
This allows other operations to occur during this gap and potentially
allows the tidy operation to consume less resources per unit of time
(due to the sleep -- though obviously consumes the same resources over
the time of the operation).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for cancellation, pause
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add API docs on pause_duration, /tidy-cancel
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add lock releasing around tidy pause
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Reset cancel guard, return errors
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add ability to perform automatic tidy operations
This enables the PKI secrets engine to allow tidy to be started
periodically by the engine itself, avoiding the need for interaction.
This operation is disabled by default (to avoid load on clusters which
don't need tidy to be run) but can be enabled.
In particular, a default tidy configuration is written (via
/config/auto-tidy) which mirrors the options passed to /tidy. Two
additional parameters, enabled and interval, are accepted, allowing
auto-tidy to be enabled or disabled and controlling the interval
(between successful tidy runs) to attempt auto-tidy.
Notably, a manual execution of tidy will delay additional auto-tidy
operations. Status is reported via the existing /tidy-status endpoint.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on auto-tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for auto-tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Prevent race during parallel testing
We modified the RollbackManager's execution window to allow more
faithful testing of the periodicFunc. However, the TestAutoRebuild and
the new TestAutoTidy would then race against each other for modifying
the period and creating their clusters (before resetting to the old
value).
This changeset adds a lock around this, preventing the races.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use tidyStatusLock to gate lastTidy time
This prevents a data race between the periodic func and the execution of
the running tidy.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add read lock around tidyStatus gauges
When reading from tidyStatus for computing gauges, since the underlying
values aren't atomics, we really should be gating these with a read lock
around the status access.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Issuer renames should invalidate CRL cache times
When an issuer is renamed (or rather, two issuers' names are swapped in
quick succession), this is akin to the earlier identified default issuer
update condition. So, when any issuer is updated, go ahead and trigger
the invalidation logic.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix handling of delta CRL If-Modified-Since
The If-Modified-Since PR was proposed prior to the Delta CRL changes and
thus didn't take it into account. This follow-up commit fixes that,
addressing If-Modified-Since semantics for delta CRL fetching and
ensuring an accurate number is stored.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* honor header if-modified-since if present
* pathGetIssuerCRL first version
* check if modified since for CA endpoints
* fix date comparison for CA endpoints
* suggested changes and refactoring
* add writeIssuer to updateDefaultIssuerId and fix error
* Move methods out of storage.go into util.go
For the most part, these take a SC as param, but aren't directly storage
relevant operations. Move them out of storage.go as a result.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use UTC timezone for storage
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rework path_fetch for better if-modified-since handling
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Invalidate all issuers, CRLs on default write
When the default is updated, access under earlier timestamps will not
work as we're unclear if the timestamp is for this issuer or a previous
issuer. Thus, we need to invalidate the CRL and both issuers involved
(previous, next) by updating their LastModifiedTimes.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for If-Modified-Since
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly invalidate default issuer changes
When the default issuer changes, we'll have to mark the invalidation on
PR secondary clusters, so they know to update their CRL mapping as well.
The swapped issuers will have an updated modification time (which will
eventually replicate down and thus be correct), but the CRL modification
time is cluster-local information and thus won't be replicated.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* make fmt
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor sendNotModifiedResponseIfNecessary
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on if-modified-since
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow generation of up-to-date delta CRLs
While switching to periodic rebuilds of CRLs alleviates the constant
rebuild pressure on Vault during times of high revocation, the CRL
proper becomes stale. One response to this is to switch to OCSP, but not
every system has support for this. Additionally, OCSP usually requires
connectivity and isn't used to augment a pre-distributed CRL (and is
instead used independently).
By generating delta CRLs containing only new revocations, an existing
CRL can be supplemented with newer revocations without requiring Vault
to rebuild all complete CRLs. Admins can periodically fetch the delta
CRL and add it to the existing CRL and applications should be able to
support using serials from both.
Because delta CRLs are emptied when the next complete CRL is rebuilt, it
is important that applications fetch the delta CRL and correlate it to
their complete CRL; if their complete CRL is older than the delta CRL's
extension number, applications MUST fetch the newer complete CRL to
ensure they have a correct combination.
This modifies the revocation process and adds several new configuration
options, controlling whether Delta CRLs are enabled and when we'll
rebuild it.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for delta CRLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on delta CRLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address review feedback: fix several bugs
Thanks Steve!
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly invoke periodic func on active nodes
We need to ensure we read the updated config (in case of OCSP request
handling on standby nodes), but otherwise want to avoid CRL/DeltaCRL
re-building.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor tidy steps into two separate helpers
This refactors the tidy go routine into two separate helpers, making it
clear where the boundaries of each are: variables are passed into these
method and concerns are separated. As more operations are rolled into
tidy, we can continue adding more helpers as appropriate. Additionally,
as we move to make auto-tidy occur, we can use these as points to hook
into periodic tidying.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor revInfo checking to helper
This allows us to validate whether or not a revInfo entry contains a
presently valid issuer, from the existing mapping. Coupled with the
changeset to identify the issuer on revocation, we can begin adding
capabilities to tidy to update this association, decreasing CRL build
time and increasing the performance of OCSP.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor issuer fetching for revocation purposes
Revocation needs to gracefully handle using the old legacy cert bundle,
so fetching issuers (and parsing them) needs to be done slightly
differently than other places. Refactor this from revokeCert into a
common helper that can be used by tidy.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow tidy to associate revoked certs, issuers
When revoking a certificate, we need to associate the issuer that signed
its certificate back to the revInfo entry. Historically this was
performed during CRL building (and still remains so), but when running
without CRL building and with only OCSP, performance will degrade as the
issuer needs to be found each time.
Instead, allow the tidy operation to take over this role, allowing us to
increase the performance of OCSP and CRL in this scenario, by decoupling
issuer identification from CRL building in the ideal case.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for tidy updates
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on new tidy parameter, metrics
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor tidy config into shared struct
Finish adding metrics, status messages about new tidy operation.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Previously we used the global backend-set crlLifetime as a default
value. However, this was refactored into a new defaultCrlConfig instead,
which we should reply with when the CRL configuration has not been set
yet. In particular, the 72h default expiry (and new 12h auto-rebuild
grace period) was added and made explicit.
This fixes the broken UI test.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow automatic rebuilding of CRLs
When enabled, periodic rebuilding of CRLs will improve PKI mounts in two
way:
1. Reduced load during periods of high (new) revocations, as the CRL
isn't rebuilt after each revocation but instead on a fixed schedule.
2. Ensuring the CRL is never stale as long as the cluster remains up,
by checking for next CRL expiry and regenerating CRLs before that
happens. This may increase cluster load when operators have large
CRLs that they'd prefer to let go stale, rather than regenerating
fresh copies.
In particular, we set a grace period before expiration of CRLs where,
when the periodic function triggers (about once a minute), we check
upcoming CRL expirations and check if we need to rebuild the CRLs.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on periodic rebuilding
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow modification of rollback period for testing
When testing backends that use the periodic func, and specifically,
testing the behavior of that periodic func, waiting for the usual 1m
interval can lead to excessively long test execution. By switching to a
shorter period--strictly for testing--we can make these tests execute
faster.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for auto-rebuilding of CRLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove non-updating getConfig variant
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Avoid double reload of config
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor existing CRL function to storage getRevocationConfig
* Introduce ocsp_disable config option in config/crl
* Introduce OCSPSigning usage flag on issuer
* Add ocsp-request passthrough within lower layers of Vault
* Add OCSP responder to Vault PKI
* Add API documentation for OCSP
* Add cl
* Revert PKI storage migration modifications for OCSP
* Smaller PR feedback items
- pki.mdx doc update
- parens around logical.go comment to indicate DER encoded request is
related to OCSP and not the snapshots
- Use AllIssuers instead of writing them all out
- Drop zero initialization of crl config's Disable flag if not present
- Upgrade issuer on the fly instead of an initial migration
* Additional clean up backing out the writeRevocationConfig refactoring
* Remove Dirty issuer flag and update comment about not writing upgrade to
storage
* Address PR feedback and return Unknown response when mismatching issuer
* make fmt
* PR Feedback.
* More PR feedback
- Leverage ocsp response constant
- Remove duplicate errors regarding unknown issuers
* Allow marking issuers as revoked
This allows PKI's issuers to be considered revoked and appear on each
others' CRLs. We disable issuance (via removing the usage) and prohibit
modifying the usage via the regular issuer management interface.
A separate endpoint is necessary because issuers (especially if signed
by a third-party CA using incremental serial numbers) might share a
serial number (e.g., an intermediate under cross-signing might share the
same number as an external root or an unrelated intermediate).
When the next CRL rebuild happens, this issuer will then appear on
others issuers CRLs, if they validate this issuer's certificate.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on revoking issuers
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for issuer revocation semantics
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Notate that CRLs will be rebuilt
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix timestamp field from _utc -> to _rfc3339
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure serial-based accesses shows as revoked
Thanks Kit!
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add warning when revoking default issuer
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow Proof of Possession based revocation
Revocation by proof of possession ensures that we have a private key
matching the (provided or stored) certificate. This allows callers to
revoke certificate they own (as proven by holding the corresponding
private key), without having an admin create innumerable ACLs around
the serial_number parameter for every issuance/user.
We base this on Go TLS stack's verification of certificate<->key
matching, but extend it where applicable to ensure curves match, the
private key is indeed valid, and has the same structure as the
corresponding public key from the certificate.
This endpoint currently is authenticated, allowing operators to disable
the endpoint if it isn't desirable to use, via ACL policies.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify error message on ParseDERKey
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Leave revoke-with-key authenticated
After some discussion, given the potential for DoS (via submitting a lot
of keys/certs to validate, including invalid pairs), it seems best to
leave this as an authenticated endpoint. Presently in Vault, there's no
way to have an authenticated-but-unauthorized path (i.e., one which
bypasses ACL controls), so it is recommended (but not enforced) to make
this endpoint generally available by permissive ACL policies.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add API documentation on PoP
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add acceptance tests for Proof of Possession
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Exercise negative cases in PoP tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow role-based sign-verbatim with chosen issuer
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add warning with missing requested verbatim role
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update builtin/logical/pki/backend.go
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
- No point in writing any logs if no previous bundle exists
- Only log output and schedule a CRL rebuild is we actually migration something
- Do not log on PKI storage version set/checks.
* Address issues with revoke operations pre-migration of PKI issuers
- Leverage the legacyBundleShimID though out the path of CRL building
when legacy storage mode is active.
- Instead of having multiple locations without a lock checking for the
useLegacyBundleCaStorage flag is set, check it once and then use the
same issuerId everywhere
- Address some locking issues that might lead to a bad read/write when
switching from legacy to non-legacy mode on startup and post-migration
* Add test suite for PKI apis pre-migration to new issuer storage format
- Add tests that validate all apis work as expected in pre-migration mode
- Add tests for apis that we don't expect to work, they should return a
migration related error message
- Add some missing validations on various new apis.
- Leverage a Get lookup operation to see if our reference field is a UUID
instead of listing all key/issuers and iterating over the list.
- This should be faster and we get a cached lookup possibly if it was a
UUID entry that we previously loaded.
- Address some small feedback about migration wording as well.
* Starter PKI CA Storage API (#14796)
* Simple starting PKI storage api for CA rotation
* Add key and issuer storage apis
* Add listKeys and listIssuers storage implementations
* Add simple keys and issuers configuration storage api methods
* Handle resolving key, issuer references
The API context will usually have a user-specified reference to the key.
This is either the literal string "default" to select the default key,
an identifier of the key, or a slug name for the key. Here, we wish to
resolve this reference to an actual identifier that can be understood by
storage.
Also adds the missing Name field to keys.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add method to fetch an issuer's cert bundle
This adds a method to construct a certutil.CertBundle from the specified
issuer identifier, optionally loading its corresponding key for signing.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor certutil PrivateKey PEM handling
This refactors the parsing of PrivateKeys from PEM blobs into shared
methods (ParsePEMKey, ParseDERKey) that can be reused by the existing
Bundle parsing logic (ParsePEMBundle) or independently in the new
issuers/key-based PKI storage code.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add importKey, importCert to PKI storage
importKey is generally preferable to the low-level writeKey for adding
new entries. This takes only the contents of the private key (as a
string -- so a PEM bundle or a managed key handle) and checks if it
already exists in the storage.
If it does, it returns the existing key instance.
Otherwise, we create a new one. In the process, we detect any issuers
using this key and link them back to the new key entry.
The same holds for importCert over importKey, with the note that keys
are not modified when importing certificates.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for importing issuers, keys
This adds tests for importing keys and issuers into the new storage
layout, ensuring that identifiers are correctly inferred and linked.
Note that directly writing entries to storage (writeKey/writeissuer)
will take KeyID links from the parent entry and should not be used for
import; only existing entries should be updated with this info.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Implement PKI storage migration.
- Hook into the backend::initialize function, calling the migration on a primary only.
- Migrate an existing certificate bundle to the new issuers and key layout
* Make fetchCAInfo aware of new storage layout
This allows fetchCAInfo to fetch a specified issuer, via a reference
parameter provided by the user. We pass that into the storage layer and
have it return a cert bundle for us. Finally, we need to validate that
it truly has the key desired.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Begin /issuers API endpoints
This implements the fetch operations around issuers in the PKI Secrets
Engine. We implement the following operations:
- LIST /issuers - returns a list of known issuers' IDs and names.
- GET /issuer/:ref - returns a JSON blob with information about this
issuer.
- POST /issuer/:ref - allows configuring information about issuers,
presently just its name.
- DELETE /issuer/:ref - allows deleting the specified issuer.
- GET /issuer/:ref/{der,pem} - returns a raw API response with just
the DER (or PEM) of the issuer's certificate.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add import to PKI Issuers API
This adds the two core import code paths to the API:
/issuers/import/cert and /issuers/import/bundle. The former differs from
the latter in that the latter allows the import of keys. This allows
operators to restrict importing of keys to privileged roles, while
allowing more operators permission to import additional certificates
(not used for signing, but instead for path/chain building).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add /issuer/:ref/sign-intermediate endpoint
This endpoint allows existing issuers to be used to sign intermediate
CA certificates. In the process, we've updated the existing
/root/sign-intermediate endpoint to be equivalent to a call to
/issuer/default/sign-intermediate.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add /issuer/:ref/sign-self-issued endpoint
This endpoint allows existing issuers to be used to sign self-signed
certificates. In the process, we've updated the existing
/root/sign-self-issued endpoint to be equivalent to a call to
/issuer/default/sign-self-issued.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add /issuer/:ref/sign-verbatim endpoint
This endpoint allows existing issuers to be used to directly sign CSRs.
In the process, we've updated the existing /sign-verbatim endpoint to be
equivalent to a call to /issuer/:ref/sign-verbatim.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow configuration of default issuers
Using the new updateDefaultIssuerId(...) from the storage migration PR
allows for easy implementation of configuring the default issuer. We
restrict callers from setting blank defaults and setting default to
default.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix fetching default issuers
After setting a default issuer, one should be able to use the old /ca,
/ca_chain, and /cert/{ca,ca_chain} endpoints to fetch the default issuer
(and its chain). Update the fetchCertBySerial helper to no longer
support fetching the ca and prefer fetchCAInfo for that instead (as
we've already updated that to support fetching the new issuer location).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add /issuer/:ref/{sign,issue}/:role
This updates the /sign and /issue endpoints, allowing them to take the
default issuer (if none is provided by a role) and adding
issuer-specific versions of them.
Note that at this point in time, the behavior isn't yet ideal (as
/sign/:role allows adding the ref=... parameter to override the default
issuer); a later change adding role-based issuer specification will fix
this incorrect behavior.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add support root issuer generation
* Add support for issuer generate intermediate end-point
* Update issuer and key arguments to consistent values
- Update all new API endpoints to use the new agreed upon argument names.
- issuer_ref & key_ref to refer to existing
- issuer_name & key_name for new definitions
- Update returned values to always user issuer_id and key_id
* Add utility methods to fetch common ref and name arguments
- Add utility methods to fetch the issuer_name, issuer_ref, key_name and key_ref arguments from data fields.
- Centralize the logic to clean up these inputs and apply various validations to all of them.
* Rename common PKI backend handlers
- Use the buildPath convention for the function name instead of common...
* Move setting PKI defaults from writeCaBundle to proper import{keys,issuer} methods
- PR feedback, move setting up the default configuration references within
the import methods instead of within the writeCaBundle method. This should
now cover all use cases of us setting up the defaults properly.
* Introduce constants for issuer_ref, rename isKeyDefaultSet...
* Fix legacy PKI sign-verbatim api path
- Addresses some test failures due to an incorrect refactoring of a legacy api
path /sign-verbatim within PKI
* Use import code to handle intermediate, config/ca
The existing bundle import code will satisfy the intermediate import;
use it instead of the old ca_bundle import logic. Additionally, update
/config/ca to use the new import code as well.
While testing, a panic was discovered:
> reflect.Value.SetMapIndex: value of type string is not assignable to type pki.keyId
This was caused by returning a map with type issuerId->keyId; instead
switch to returning string->string maps so the audit log can properly
HMAC them.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify error message on missing defaults
When the default issuer and key are missing (and haven't yet been
specified), we should clarify that error message.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update test semantics for new changes
This makes two minor changes to the existing test suite:
1. Importing partial bundles should now succeed, where they'd
previously error.
2. fetchCertBySerial no longer handles CA certificates.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add support for deleting all keys, issuers
The old DELETE /root code must now delete all keys and issuers for
backwards compatibility. We strongly suggest calling individual delete
methods (DELETE /key/:key_ref or DELETE /issuer/:issuer_ref) instead,
for finer control.
In the process, we detect whether the deleted key/issuers was set as the
default. This will allow us to warn (from the single key/deletion issuer
code) whether or not the default was deleted (while allowing the
operation to succeed).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Introduce defaultRef constant within PKI
- Replace hardcoded "default" references with a constant to easily identify various usages.
- Use the addIssuerRefField function instead of redefining the field in various locations.
* Rework PKI test TestBackend_Root_Idempotency
- Validate that generate/root calls are no longer idempotent, but the bundle importing
does not generate new keys/issuers
- As before make sure that the delete root api resets everything
- Address a bug within the storage that we bombed when we had multiple different
key types within storage.
* Assign Name=current to migrated key and issuer
- Detail I missed from the RFC was to assign the Name field as "current" for migrated key and issuer.
* Build CRL upon PKI intermediary set-signed api called
- Add a call to buildCRL if we created an issuer within pathImportIssuers
- Augment existing FullCAChain to verify we have a proper CRL post set-signed api call
- Remove a code block writing out "ca" storage entry that is no longer used.
* Identify which certificate or key failed
When importing complex chains, we should identify in which certificate
or key the failure occurred.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* PKI migration writes out empty migration log entry
- Since the elements of the struct were not exported we serialized an empty
migration log to disk and would re-run the migration
* Add chain-building logic to PKI issuers path
With the one-entry-per-issuer approach, CA Chains become implicitly
constructed from the pool of issuers. This roughly matches the existing
expectations from /config/ca (wherein a chain could be provided) and
/intemediate/set-signed (where a chain may be provided). However, in
both of those cases, we simply accepted a chain. Here, we need to be
able to reconstruct the chain from parts on disk.
However, with potential rotation of roots, we need to be aware of
disparate chains. Simply concating together all issuers isn't
sufficient. Thus we need to be able to parse a certificate's Issuer and
Subject field and reconstruct valid (and potentially parallel)
parent<->child mappings.
This attempts to handle roots, intermediates, cross-signed
intermediates, cross-signed roots, and rotated keys (wherein one might
not have a valid signature due to changed key material with the same
subject).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Return CA Chain when fetching issuers
This returns the CA Chain attribute of an issuer, showing its computed
chain based on other issuers in the database, when fetching a specific
issuer.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add testing for chain building
Using the issuance infrastructure, we generate new certificates (either
roots or intermediates), positing that this is roughly equivalent to
importing an external bundle (minus error handling during partial
imports). This allows us to incrementally construct complex chains,
creating reissuance cliques and cross-signing cycles.
By using ECDSA certificates, we avoid high signature verification and
key generation times.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow manual construction of issuer chain
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix handling of duplicate names
With the new issuer field (manual_chain), we can no longer err when a
name already exists: we might be updating the existing issuer (with the
same name), but changing its manual_chain field. Detect this error and
correctly handle it.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for manual chain building
We break the clique, instead building these chains manually, ensuring
that the remaining chains do not change and only the modified certs
change. We then reset them (back to implicit chain building) and ensure
we get the same results as earlier.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add stricter verification of issuers PEM format
This ensures each issuer is only a single certificate entry (as
validated by count and parsing) without any trailing data.
We further ensure that each certificate PEM has leading and trailing
spaces removed with only a single trailing new line remaining.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix full chain building
Don't set the legacy IssuingCA field on the certificate bundle, as we
prefer the CAChain field over it.
Additionally, building the full chain could result in duplicate
certificates when the CAChain included the leaf certificate itself. When
building the full chain, ensure we don't include the bundle's
certificate twice.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add stricter tests for full chain construction
We wish to ensure that each desired certificate in the chain is only
present once.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rename PKI types to avoid constant variable name collisions
keyId -> keyID
issuerId -> issuerID
key -> keyEntry
issuer -> issuerEntry
keyConfig -> keyConfigEntry
issuerConfig -> issuerConfigEntry
* Update CRL handling for multiple issuers
When building CRLs, we've gotta make sure certs issued by that issuer
land up on that issuer's CRL and not some other CRL. If no CRL is
found (matching a cert), we'll place it on the default CRL.
However, in the event of equivalent issuers (those with the same subject
AND the same key material) -- perhaps due to reissuance -- we'll only
create a single (unified) CRL for them.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow fetching updated CRL locations
This updates fetchCertBySerial to support querying the default issuer's
CRL.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove legacy CRL storage location test case
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update to CRLv2 Format to copy RawIssuer
When using the older Certificate.CreateCRL(...) call, Go's x509 library
copies the parsed pkix.Name version of the CRL Issuer's Subject field.
For certain constructed CAs, this fails since pkix.Name is not suitable
for round-tripping. This also builds a CRLv1 (per RFC 5280) CRL.
In updating to the newer x509.CreateRevocationList(...) call, we can
construct the CRL in the CRLv2 format and correctly copy the issuer's
name. However, this requires holding an additional field per-CRL, the
CRLNumber field, which is required in Go's implementation of CRLv2
(though OPTIONAL in the spec). We store this on the new
LocalCRLConfigEntry object, per-CRL.
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add comment regarding CRL non-assignment in GOTO
In previous versions of Vault, it was possible to sign an empty CRL
(when the CRL was disabled and a force-rebuild was requested). Add a
comment about this case.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow fetching the specified issuer's CRL
We add a new API endpoint to fetch the specified issuer's CRL directly
(rather than the default issuer's CRL at /crl and /certs/crl). We also
add a new test to validate the CRL in a multi-root scenario and ensure
it is signed with the correct keys.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add new PKI key prefix to seal wrapped storage (#15126)
* Refactor common backend initialization within backend_test
- Leverage an existing helper method within the PKI backend tests to setup a PKI backend with storage.
* Add ability to read legacy cert bundle if the migration has not occurred on secondaries.
- Track the migration state forbidding an issuer/key writing api call if we have not migrated
- For operations that just need to read the CA bundle, use the same tracking variable to
switch between reading the legacy bundle or use the new key/issuer storage.
- Add an invalidation function that will listen for updates to our log path to refresh the state
on secondary clusters.
* Always write migration entry to trigger secondary clusters to wake up
- Some PR feedback and handle a case in which the primary cluster does
not have a CA bundle within storage but somehow a secondary does.
* Update CA Chain to report entire chain
This merges the ca_chain JSON field (of the /certs/ca_chain path) with
the regular certificate field, returning the root of trust always. This
also affects the non-JSON (raw) endpoints as well.
We return the default issuer's chain here, rather than all known issuers
(as that may not form a strict chain).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow explicit issuer override on roles
When a role is used to generate a certificate (such as with the sign/
and issue/ legacy paths or the legacy sign-verbatim/ paths), we prefer
that issuer to the one on the request. This allows operators to set an
issuer (other than default) for requests to be issued against,
effectively making the change no different from the users' perspective
as it is "just" a different role name.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for role-based issuer selection
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Expand NotAfter limit enforcement behavior
Vault previously strictly enforced NotAfter/ttl values on certificate
requests, erring if the requested TTL extended past the NotAfter date of
the issuer. In the event of issuing an intermediate, this behavior was
ignored, instead permitting the issuance.
Users generally do not think to check their issuer's NotAfter date when
requesting a certificate; thus this behavior was generally surprising.
Per RFC 5280 however, issuers need to maintain status information
throughout the life cycle of the issued cert. If this leaf cert were to
be issued for a longer duration than the parent issuer, the CA must
still maintain revocation information past its expiration.
Thus, we add an option to the issuer to change the desired behavior:
- err, to err out,
- permit, to permit the longer NotAfter date, or
- truncate, to silently truncate the expiration to the issuer's
NotAfter date.
Since expiration of certificates in the system's trust store are not
generally validated (when validating an arbitrary leaf, e.g., during TLS
validation), permit should generally only be used in that case. However,
browsers usually validate intermediate's validity periods, and thus
truncate should likely be used (as with permit, the leaf's chain will
not validate towards the end of the issuance period).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for expanded issuance behaviors
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add warning on keyless default issuer (#15178)
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update PKI to new Operations framework (#15180)
The backend Framework has updated Callbacks (used extensively in PKI) to
become deprecated; Operations takes their place and clarifies forwarding
of requests.
We switch to the new format everywhere, updating some bad assumptions
about forwarding along the way. Anywhere writes are handled (that should
be propagated to all nodes in all clusters), we choose to forward the
request all the way up to the performance primary cluster's primary
node. This holds for issuers/keys, roles, and configs (such as CRL
config, which is globally set for all clusters despite all clusters
having their own separate CRL).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Kitography/vault 5474 rebase (#15150)
* These parts work (put in signature so that backend wouldn't break, but missing fields, desc, etc.)
* Import and Generate API calls w/ needed additions to SDK.
* make fmt
* Add Help/Sync Text, fix some of internal/exported/kms code.
* Fix PEM/DER Encoding issue.
* make fmt
* Standardize keyIdParam, keyNameParam, keyTypeParam
* Add error response if key to be deleted is in use.
* replaces all instances of "default" in code with defaultRef
* Updates from Callbacks to Operations Function with explicit forwarding.
* Fixes a panic with names not being updated everywhere.
* add a logged error in addition to warning on deleting default key.
* Normalize whitespace upon importing keys.
Authored-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Fix isKeyInUse functionality.
* Fixes tests associated with newline at end of key pem.
* Add alternative proposal PKI aliased paths (#15211)
* Add aliased path for root/rotate/:exported
This adds a user-friendly path name for generating a rotated root. We
automatically choose the name "next" for the newly generated root at
this path if it doesn't already exist.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add aliased path for intermediate/cross-sign
This allows cross-signatures to work.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add path for replacing the current root
This updates default to point to the value of the issuer with name
"next" rather than its current value.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove plural issuers/ in signing paths
These paths use a single issuer and thus shouldn't include the plural
issuers/ as a path prefix, instead using the singular issuer/ path
prefix.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Only warn if default issuer was imported
When the default issuer was not (re-)imported, we'd fail to find it,
causing an extraneous warning about missing keys, even though this
issuer indeed had a key.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing issuer sign/issue paths
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clean up various warnings within the PKI package (#15230)
* Rebuild CRLs on secondary performance clusters post migration and on new/updated issuers
- Hook into the backend invalidation function so that secondaries are notified of
new/updated issuer or migrations occuring on the primary cluster. Upon notification
schedule a CRL rebuild to take place upon the next process to read/update the CRL
or within the periodic function if no request comes in.
* Schedule rebuilding PKI CRLs on active nodes only
- Address an issue that we were scheduling the rebuilding of a CRL on standby
nodes, which would not be able to write to storage.
- Fix an issue with standby nodes not correctly determining that a migration previously
occurred.
* Return legacy CRL storage path when no migration has occurred.
* Handle issuer, keys locking (#15227)
* Handle locking of issuers during writes
We need a write lock around writes to ensure serialization of
modifications. We use a single lock for both issuer and key
updates, in part because certain operations (like deletion) will
potentially affect both.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing b.useLegacyBundleCaStorage guards
Several locations needed to guard against early usage of the new issuers
endpoint pre-migration.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address PKI to properly support managed keys (#15256)
* Address codebase for managed key fixes
* Add proper public key comparison for better managed key support to importKeys
* Remove redundant public key fetching within PKI importKeys
* Correctly handle rebuilding remaining chains
When deleting a specific issuer, we might impact the chains. From a
consistency perspective, we need to ensure the remaining chains are
correct and don't refer to the since-deleted issuer, so trigger a full
rebuild here.
We don't need to call this in the delete-the-world (DELETE /root) code
path, as there shouldn't be any remaining issuers or chains to build.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove legacy CRL bundle on world deletion
When calling DELETE /root, we should remove the legacy CRL bundle, since
we're deleting the legacy CA issuer bundle as well.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove deleted issuers' CRL entries
Since CRLs are no longer resolvable after deletion (due to missing
issuer ID, which will cause resolution to fail regardless of if an ID or
a name/default reference was used), we should delete these CRLs from
storage to avoid leaking them.
In the event that this issuer comes back (with key material), we can
simply rebuild the CRL at that time (from the remaining revoked storage
entries).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add unauthed JSON fetching of CRLs, Issuers (#15253)
Default to fetching JSON CRL for consistency
This makes the bare issuer-specific CRL fetching endpoint return the
JSON-wrapped CRL by default, moving the DER CRL to a specific endpoint.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Add JSON-specific endpoint for fetching issuers
Unlike the unqualified /issuer/:ref endpoint (which also returns JSON),
we have a separate /issuer/:ref/json endpoint to return _only_ the
PEM-encoded certificate and the chain, mirroring the existing /cert/ca
endpoint but for a specific issuer. This allows us to make the endpoint
unauthenticated, whereas the bare endpoint would remain authenticated
and usually privileged.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Add tests for raw JSON endpoints
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add unauthenticated issuers endpoints to PKI table
This adds the unauthenticated issuers endpoints?
- LIST /issuers,
- Fetching _just_ the issuer certificates (in JSON/DER/PEM form), and
- Fetching the CRL of this issuer (in JSON/DER/PEM form).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add issuer usage restrictions bitset
This allows issuers to have usage restrictions, limiting whether they
can be used to issue certificates or if they can generate CRLs. This
allows certain issuers to not generate a CRL (if the global config is
with the CRL enabled) or allows the issuer to not issue new certificates
(but potentially letting the CRL generation continue).
Setting both fields to false effectively forms a soft delete capability.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* PKI Pod rotation Add Base Changelog (#15283)
* PKI Pod rotation changelog.
* Use feature release-note formatting of changelog.
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
Co-authored-by: Kit Haines <kit.haines@hashicorp.com>
Co-authored-by: kitography <khaines@mit.edu>
* Add duration/count metrics to PKI issue and revoke flows
* docs, changelog
* tidy
* last tidy
* remove err
* Update callsites
* Simple returns
* Handle the fact that test cases don't have namespaces
* Add mount point to the request
* fmt
* Handle empty mount point, and add it to unit tests
* improvement
* Turns out sign-verbatim is tricky, it can take a role but doesn't have to
* Get around the field schema problem
VAULT-444: Add PKI tidy-status endpoint.
Add metrics so that the PKI tidy status can be monitored using telemetry as well.
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Add an idle timeout for the server
Because tidy operations can be long-running, this also changes all tidy
operations to behave the same operationally (kick off the process, get a
warning back, log errors to server log) and makes them all run in a
goroutine.
This could mean a sort of hard stop if Vault gets sealed because the
function won't have the read lock. This should generally be okay
(running tidy again should pick back up where it left off), but future
work could use cleanup funcs to trigger the functions to stop.
* Fix up tidy test
* Add deadline to cluster connections and an idle timeout to the cluster server, plus add readheader/read timeout to api server
