* Refactor setting local addresses
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Validate wildcard domains in ACME test suite
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add locking to DNS resolver
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Better removal semantics for records
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Export DockerAPI for use by other consumers
As usage of DockerCluster gets more advanced, some users may want to
interact with the container nodes of the cluster. While, if you already
have a DockerAPI instance lying around you can reuse that safely, for
use cases where an existing e.g., docker/testhelpers's runner instance
is not available, reusing the existing cluster's DockerAPI is easiest.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add ability to exec commands without runner
When modifying DockerTestCluster's containers manually, we might not
have a Runner instance; instead, expose the ability to run commands via
a DockerAPI instance directly, as they're awfully convenient.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add DNS resolver into ACME tests
This updates the pkiext_binary tests to use an adjacent DNS resolver,
allowing these tests to eventually be extended to solve DNS challenges,
as modifying the /etc/hosts file does not allow this.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix loading DNS resolver onto network
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix bug with DNS configuration validation
Both conditionals here were inverted: address being empty means a bad
specification was given, and the parse being nil means that it was not a
valid IP address.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix specifying TXT records, allow removing records
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
- Do not serialize the entire internal object, instead return
just the Type and Value fields back to the caller.
- Also within authorization responses, return the base domain
on wildcard queries, dropping the *. as the RFC requests.
- Update tests to reflect/test this logic.
- We have a known issue that is difficult to address in released versions of Vault that OCSP GET requests can contain consecutive / characters which the Golang HTTP mux will force a redirection.
- Instead of failing various PRs and runs with this known issue, check to see if we are about to trigger it and if so skip the test. We have already at this point tested the POST version of the API.
- When someone is fetching the order to get it's status, compute if we
need to bump the status to Ready like we do in finalize handler
- Add a wait state to the ACME docker test suite to deal with a race
condition
* Initial refactoring of ACME PKI binary tests
- Rework test suite to use a single Vault cluster with
different mounts.
- Refactor convenience methods to write PKI tests.
* Add ACME test cases for mixed IP and DNS, along with IP only identifier requests
* Parallelize the Vault PKI test suite
* Add missing tidy-status state values
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs on auto-tidy reading
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing tidy status field revocation_queue_safety_buffer
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Include pause_duration in tidy-status docs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add date of last auto-tidy operation to status
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add additional existing keys response field
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update tests for validating existing keys
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update docs for import to include new fields
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update website/content/api-docs/secret/pki.mdx
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Validate identifiers against role when creating order
Perform some initial validation against the order's requested
identifiers during creation; this gives a client a heads up that their
request might be rejected by the server before they have to solve
challenges for these, only to find out during CSR submission time that
there is no way to request the specified certificate.
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add unit tests and switch errors to ErrRejectedIdentifier
- Change the error messages from validating identifiers against the
role to ErrRejectedIdentifier errors if they do occur
- Add unit tests to validate that we validate against the various
roles somewhat okay.
* go doc
* Fix typo in test godoc
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Add default ACME configuration, invalidate on write
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add enforcment of ACME enabled
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Validate requested role against ACME config
Co-authored-by: kitography <khaines@mit.edu>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add validation of issuer restrictions with ACME
Co-authored-by: kitography <khaines@mit.edu>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add validation around allowed config lenghts
Co-authored-by: kitography <khaines@mit.edu>
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Prune later deemed unnecessary config options
Co-authored-by: kitography <khaines@mit.edu>
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* make fmt
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: kitography <khaines@mit.edu>
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Add PKI ACME IP SANS test case
- Leveraging the new Vault docker based tests along with nginx and
the Go ACME library, verify that Vault can properly perform ACME
validations for IP identifiers
* Formatting
* Handle caching of ACME config
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add DNS resolvers to ACME configuration
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add custom DNS resolver to challenge verification
This required plumbing through the config, reloading it when necessary,
and creating a custom net.Resolver instance.
Not immediately clear is how we'd go about building a custom DNS
validation mechanism that supported multiple resolvers. Likely we'd need
to rely on meikg/dns and handle the resolution separately for each
container and use a custom Dialer that assumes the address is already
pre-resolved.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Improvements to Docker harness
- Expose additional service information, allowing callers to figure out
both the local address and the network-specific address of the
service container, and
- Allow modifying permissions on uploaded container files.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add infrastructure to run Bind9 in a container for tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Validate DNS-01 challenge works
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add the ability to disable ACME through an OS environment variable
- Disable ACME through the VAULT_DISABLE_PUBLIC_ACME environment
variable.
* PR feedback
- Switch to using t.Setenv instead of manually doing it
- Remove t.Parallel from the test not to influence others
* make fmt
* Enforce ACME accounts to a specific directory path
- Accounts and correspondingly orders, authz should not cross
the path boundaries. So we now tag an ACME account with a specific
directory based on the requested role/issuer values in the path.
- If an operation occurs on a different acme directory path it will
cause a failure of the request.
- Add some go doc to a few places and reorder the methods in the
acme_wrappers.go class to highlight the wrappers and not intertwine
the helper functions
- Rename path_acme_new_account.go to path_acme_account.go as it has
several account related methods now.
* Get rid of bad test case
- The previous commit contained a bug fix for us properly
loading issuers within the ACME path, that exposed
this broken/bad test case. Simply remove it.
* Add ACME revocation handlers
This refactors path_revoke to expose Proof of Possession verification,
which is reused by ACME to allow methods 1 and 2:
1. Revocation of a certificate issued by the account, using account
signature as sufficient proof.
2. Revocation of a certificate via proving possession of its private
key, using this private key to create the JWS signature.
We do not support the third mechanism, completing challenges equivalent
to those on the existing certificate and then performing a revocation
under an account which didn't issue the certificate but which did solve
those challenges.
We additionally create another map account->cert->order, allowing us to
quickly look up if a cert was issued by this particular account. Note
that the inverse lookup of cert->(account, order) lookup isn't yet
possible due to Vault's storage structure.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update ACME pkiext tests to revoke certs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add auth handler checks
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address review feedback
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add enable_aia_url_templating to read issuer
This field was elided from read issuer responses, though the value
otherwise persisted correctly.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add comprehensive test for patching issuers
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing OpenAPI scheme definition
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Start ACME containerized test suite
This starts a containerized ACME test suite using containers, running
both Vault and Certbot (in standalone mode) in the container to ensure
we successfully issue certificates.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Switch to using hashicorp mirror
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add support to load roles and issuers within ACME wrapper
* Add missing go doc to new test
* PR feedback
- Move field definitions into fields.go
- Update wording and associated errors to some role failures.
- Add missing ':' to error messages
* Add additional fields to LIST issuers for Web UI
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add DNS challenge validation to ACME
This allows us to validate against wildcard domain names, as the HTTP-01
challenge does not support wildcard validation.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Properly delay challenge retry attempts
Previously we'd essentially semi-busy wait for a challenge to become
retry-able, as the queue itself had no knowledge of the retry after
value of the validation attempt. Now, we plumb through this value into
the queue itself, to aide selection of validations to attempt.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor wildcard validation checks
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add helper to determine if identifier is wildcard
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Better validate wildcard acceptance
This correctly validates wildcards to contain only a leading prefix
(*.) and must include another label, also ensuring that the remaining
domain components pass non-IP and IDNA validation, and removing them
from display on the authorization. Finally, we restrict the challenge
types available for various combinations of IP, DNS, and wildcard
addresses.
This then updates the tests to validate this as well.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* WIP: Implement ACME CSR signing and certificate retrieval
* Add some validations within the ACME finalize API
- Validate that the CSR we were given matches the DNS names
and IP addresses within the order
- Validate that the CSR does not share the same public as the
account
* Gate ACME finalize order validating all authorizations are in valid state
* Add infrastructure for warnings on CRL rebuilds
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add warning on issuer missing KU for CRL Signing
When an entire issuer equivalency class is missing CRL signing usage
(but otherwise has key material present), we should add a warning so
operators can either correct this issuer or create an equivalent version
with KU specified.
Resolves: https://github.com/hashicorp/vault/issues/20137
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for issuer warnings
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix return order of CRL builders
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow creating storageContext with timeout
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add challenge validation engine to ACME
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Initialize the ACME challenge validation engine
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Trigger challenge validation on endpoint submission
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix GetKeyThumbprint to use raw base64
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Point at localhost for testing
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add cleanup of validation engine
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Minor follow-ups to #16865
Fix PKI issuer upgrade logic when upgrading to 1.12 or later, to
actually turn off the issuer crl-signing usage when it intended to.
Fix minor typo in docs.
* changelog
* Add HTTP challenge validator
This will attempt to safely validate HTTP challenges, following a
limited number of redirects and timing out after too much time has
passed.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test for ValidateKeyAuthorization
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test cases for ValidateHTTP01Challenge
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add token to HTTP challenge
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove extraneous certificate from OCSP response
Since the issuer used to sign the certificate also signs the OCSP
response, no additional information is added by sending the issuer again
in the certs field of the BasicOCSPResponse structure. Removing it saves
bytes and avoids confusing Go-based OCSP verifiers which cannot handle
the cert issuer being duplicated in the certs field.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
- Add a helper function that can accept the final API path along with
the pattern function for an ACME api definition and generate the
various flavors for the given API
* Move all ACME wrappers into a dedicated go file
- Make it easier to figure out where the various wrappers for
ACME exist by locating them inside a dedicated go file instead
of spread out across the various path_acme_xxx files.
* Add missing copyright headers to PKI files
* Implement ACME new-order API
- This is a very rough draft for the new order ACME API
* Add ACME order list API
* Implement ACME Get order API
* Misc order related fixes
- Filter authorizations in GetOrders for valid
- Validate notBefore and notAfter dates make sense
- Add <order>/cert URL path to order response if set to valid
* Return account status within err authorized, if the account key verified
* revert STS lease changes, now create a lease for STS credentials but keep the ttl
Co-authored-by: Calvin Leung Huang <1883212+calvn@users.noreply.github.com>
* Distinguish POST-as-GET from POST-with-empty-body
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add ACME authorization, identifier, and challenge types
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add ability to load and save authorizations
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add ACME authorizations path handling
This supports two methods: a fetch handler over the authorization, to
expose the underlying challenges, and a deactivate handler to revoke
the authorization and mark its challenges invalid.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add ACME challenge path handling
These paths kick off processing and validation of the challenge by the
ACME client.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use a UUID for ACME kid instead of a key fingerprint
* PR feedback
- Calculate thumbprint within CreateAccount instead of passing it in
- Reorder writes within CreateAccount to now write out thumbprint entry
first as we can easily recover/overwrite it if we fail mid-way
- Change back LoadAccount in acme to return an error if it fails to
lookup the entry
* Clearify comment within ACME CreateAccount
* Rework ACME workflow test to leverage Golang's ACME client library
- Instead of testing manually, leverage the Golang ACME library
to test against our implementation from the unit tests.
* Add tests for new-account and misc fixes
- Set and return the account status for registration
- Add handlers for the account/ api/updates
- Switch acme/ to cluster local storage
- Disable terms of service checks for now as we don't set the url
* PR feedback
- Implement account deactivation
- Create separate account update handler, to not mix account creation
logic
- Add kid field to account update definition
- Add support to update contact details on an existing account
* Correctly find certificates for unified delta CRL
When building the unified delta CRL, WAL entries from the non-primary
cluster were ignored. This resulted in an incomplete delta CRL,
preventing some entries from appearing.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly rebuild unified delta CRLs
When deciding if the Unified Delta CRL should be rebuilt, we need to
check the status of all clusters and their last revoked serial numbers.
If any new serial has been revoked on any cluster, we should rebuild the
unified delta CRLs.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly persist Unified Delta CRL build entries
When building the unified CRL, we need to read the last seen serial
number from all clusters, not just the present cluster, and write it
to the last built serial for that cluster's unified delta WAL entry.
This prevents us from continuously rebuilding unified CRLs now that we
have fixed our rebuild heuristic.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix getLastWALSerial for unified delta CRLs
getLastWALSerial ignored its path argument, preventing it from reading
the specified cluster-specific WAL entry. On the primary cluster, this
was mostly equivalent, but now that we're correctly reading WAL entries
and revocations for other clusters, we need to handle reading these
entries correctly.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Copy delta WAL entries in event of failure
Any local delta WAL should be persisted to unified delta WAL space as
well. If such unified persistence fails, we need to ensure that they get
eventually moved up, otherwise they'll remain missing until the next
full CRL rebuild occurs, which might be significantly longer than when
the next delta CRL rebuild would otherwise occur. runUnifiedTransfer
already handles this for us, but it lacked logic for delta WAL serials.
The only interesting catch here is that we refuse to copy any entries
whose full unified revocation entry has not also been written.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Make doUnifiedTransferMissingLocalSerials log an error
This message is mostly an error and would always be helpful information
to have when troubleshooting failures.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Warn on cross-cluster write failures during revoke
When revoking certificates, we log cross-cluster revocation failures,
but we should really expose this information to the caller, that their
local revocation was successful, but their cross-cluster revocation
failed.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure unified delta WAL entry has full entry
Delta WAL entries are empty files whose only information (a revoked
serial number) is contained in the file path. These depend implicitly on
a full revocation entry existing for this file (whether a cross-cluster
unified entry or a local entry).
We should not write unified delta WAL entries without the corresponding
full unified revocation entry existing. Add a warning in this case.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
When reading the config, we attempt to detect if the running Vault
instance has been changed from its Enterprise status on write.
Similarly, we should detect if the mount is a local mount instead. While
this isn't changeable at runtime, using sys/raw to side-load an invalid
config could be possible.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Log, don't err, on unified delta WAL write failure
When the PBPWF fails on the Active node of a PR Secondary cluster with a
read-only failure, there is no value in forwarding this request up to
the Active node of the PR Primary cluster: it does not have the local
revocation context necessary to write a Delta WAL entry for this
request, and would likely end up writing a cross-cluster revocation
entry (if it is enabled) or else erring completely.
Instead, log this error like we do when failing to write unified CRL
entries. Switch both to using Error instead of Debug for this type of
failure.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
