* Export DockerAPI for use by other consumers
As usage of DockerCluster gets more advanced, some users may want to
interact with the container nodes of the cluster. While, if you already
have a DockerAPI instance lying around you can reuse that safely, for
use cases where an existing e.g., docker/testhelpers's runner instance
is not available, reusing the existing cluster's DockerAPI is easiest.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add ability to exec commands without runner
When modifying DockerTestCluster's containers manually, we might not
have a Runner instance; instead, expose the ability to run commands via
a DockerAPI instance directly, as they're awfully convenient.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add DNS resolver into ACME tests
This updates the pkiext_binary tests to use an adjacent DNS resolver,
allowing these tests to eventually be extended to solve DNS challenges,
as modifying the /etc/hosts file does not allow this.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix loading DNS resolver onto network
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix bug with DNS configuration validation
Both conditionals here were inverted: address being empty means a bad
specification was given, and the parse being nil means that it was not a
valid IP address.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix specifying TXT records, allow removing records
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Handle caching of ACME config
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add DNS resolvers to ACME configuration
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add custom DNS resolver to challenge verification
This required plumbing through the config, reloading it when necessary,
and creating a custom net.Resolver instance.
Not immediately clear is how we'd go about building a custom DNS
validation mechanism that supported multiple resolvers. Likely we'd need
to rely on meikg/dns and handle the resolution separately for each
container and use a custom Dialer that assumes the address is already
pre-resolved.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Improvements to Docker harness
- Expose additional service information, allowing callers to figure out
both the local address and the network-specific address of the
service container, and
- Allow modifying permissions on uploaded container files.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add infrastructure to run Bind9 in a container for tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Validate DNS-01 challenge works
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* remove intercepting helpText
* add subtext directly to StringList input component
* update tests and add coverage for new openapi-attrs util
* update test
* add warning validation to input
* lol is this right i dont know go
* literally no idea what im doing
* add Description to display attrs struct
* update struct comment
* add descriptions to remaining go fields
* add missing comma
* remaining commas..."
* add description to display attrs
* update tests
* update tests
* add changelog;
* Update ui/app/utils/openapi-to-attrs.js
* update tests following backend changes
* clearly name variable
* format files
* no longer need to test for modified tooltip since coming from backend now
* Add fix for Go x/crypto/ocsp failure case
When calling ocsp.ParseRequest(req, issue) with a non-nil issuer on a
ocsp request which _unknowingly_ contains an entry in the
BasicOCSPResponse's certs field, Go incorrectly assumes that the issuer
is a direct parent of the _first_ certificate in the certs field,
discarding the rest.
As documented in the Go issue, this is not a valid assumption and thus
causes OCSP verification to fail in Vault with an error like:
> bad OCSP signature: crypto/rsa: verification error
which ultimately leads to a cert auth login error of:
> no chain matching all constraints could be found for this login certificate
We address this by using the unsafe issuer=nil argument, taking on the
task of validating the OCSP response's signature as best we can in the
absence of full chain information on either side (both the trusted
certificate whose OCSP response we're verifying and the lack of any
additional certs the OCSP responder may have sent).
See also: https://github.com/golang/go/issues/59641
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test case with Vault PKI
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add header operation to sdk/logical
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add support for routing HEAD operations
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add support for importing RSA-PSS keys in Transit
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* bug: correct handling of the zero int64 value
* Update changelog/18729.txt
---------
Co-authored-by: valli_0x <personallune@mail.ru>
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
* impr(auth/ldap): allow to dereference aliases in searches
* docs: add documentation for LDAP alias dereferencing
* chore(auth/ldap): add changelog entry for PR 18230
* chore: run formatter
* fix: update default LDAP configuration with new default
* Update website/content/docs/auth/ldap.mdx
Co-authored-by: tjperry07 <tjperry07@users.noreply.github.com>
* docs(ldap): add alias dereferencing to API docs for LDAP
---------
Co-authored-by: tjperry07 <tjperry07@users.noreply.github.com>
Mirror NSS's GET-vs-POST selection criteria, wherein GET is preferred
over POST (as the former might be a response from a cached CDN entry,
whereas the latter might hit a live responder). However, only accept it
if it definitively says "Good" or "Revoked" -- trigger a POST request
when an unknown or failure status is seen.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
The [WebSockets spec](https://www.rfc-editor.org/rfc/rfc6455) states
that text messages must be valid UTF-8 encoded strings, which protobuf
messages virtually never are. This now correctly sends the protobuf events
as binary messages.
We change the format to correspond to CloudEvents, as originally intended,
and remove a redundant timestamp and newline.
We also bump the eventlogger to fix a race condition that this code triggers.
* add RequestResponseCallback to core/options
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* pass in router and apply function on requests
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* add callback
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* cleanup
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Anton Averchenkov <84287187+averche@users.noreply.github.com>
* Update vault/core.go
* bad typo...
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* use pvt interface, can't downcast to child struct
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* finer grained errors
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* trim path for backend
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* remove entire mount point instead of just the first part of url
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* Update vault/testing.go
Co-authored-by: Anton Averchenkov <84287187+averche@users.noreply.github.com>
* add doc string
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* update docstring
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* reformat
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* added changelog
---------
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
Co-authored-by: Anton Averchenkov <84287187+averche@users.noreply.github.com>
Also updates the event receieved to include a timestamp.
Websockets support both JSON and protobuf binary formats.
This can be used by either `wscat` or the new
`vault events subscribe`:
e.g.,
```sh
$ wscat -H "X-Vault-Token: $(vault print token)" --connect ws://127.0.0.1:8200/v1/sys/events/subscribe/abc?json=true
{"event":{"id":"5c5c8c83-bf43-7da5-fe88-fc3cac814b2e", "note":"testing"}, "eventType":"abc", "timestamp":"2023-02-07T18:40:50.598408Z"}
...
```
and
```sh
$ vault events subscribe abc
{"event":{"id":"5c5c8c83-bf43-7da5-fe88-fc3cac814b2e", "note":"testing"}, "eventType":"abc", "timestamp":"2023-02-07T18:40:50.598408Z"}
...
```
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
This isn't perfect for sure, but it's solidifying and becoming a useful
base to work off.
This routes events sent from auth and secrets plugins to the main
`EventBus` in the Vault Core. Events sent from plugins are automatically
tagged with the namespace and plugin information associated with them.
* Regexp metacharacter `.` should be escaped when used literally
The paths including `/.well-known/` in the Vault API could currently
technically be invoked with any random character in place of the dot.
* Replace implementation of OpenAPI path translator with regexp AST-based one
* Add changelog
* Typo fix from PR review - thanks!
Co-authored-by: Anton Averchenkov <84287187+averche@users.noreply.github.com>
* Add comment based on review feedback
* Change style of error handling as suggested in code review
* Make a further tweak to the handling of the error case
* Add more tests, testing cases which fail with the previous implementation
* Resolve issue with a test, and improve comment
---------
Co-authored-by: Anton Averchenkov <84287187+averche@users.noreply.github.com>
* Address pki::TestAutoRebuild flakiness
- Wait for a CRL change before progressing to the next step after
we change configuration. Prior to this we would be racing against
the CRL reloading from the configuration change.
Hamid Ghaf