* Add ability to perform automatic tidy operations
This enables the PKI secrets engine to allow tidy to be started
periodically by the engine itself, avoiding the need for interaction.
This operation is disabled by default (to avoid load on clusters which
don't need tidy to be run) but can be enabled.
In particular, a default tidy configuration is written (via
/config/auto-tidy) which mirrors the options passed to /tidy. Two
additional parameters, enabled and interval, are accepted, allowing
auto-tidy to be enabled or disabled and controlling the interval
(between successful tidy runs) to attempt auto-tidy.
Notably, a manual execution of tidy will delay additional auto-tidy
operations. Status is reported via the existing /tidy-status endpoint.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on auto-tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for auto-tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Prevent race during parallel testing
We modified the RollbackManager's execution window to allow more
faithful testing of the periodicFunc. However, the TestAutoRebuild and
the new TestAutoTidy would then race against each other for modifying
the period and creating their clusters (before resetting to the old
value).
This changeset adds a lock around this, preventing the races.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use tidyStatusLock to gate lastTidy time
This prevents a data race between the periodic func and the execution of
the running tidy.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add read lock around tidyStatus gauges
When reading from tidyStatus for computing gauges, since the underlying
values aren't atomics, we really should be gating these with a read lock
around the status access.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Issuer renames should invalidate CRL cache times
When an issuer is renamed (or rather, two issuers' names are swapped in
quick succession), this is akin to the earlier identified default issuer
update condition. So, when any issuer is updated, go ahead and trigger
the invalidation logic.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix handling of delta CRL If-Modified-Since
The If-Modified-Since PR was proposed prior to the Delta CRL changes and
thus didn't take it into account. This follow-up commit fixes that,
addressing If-Modified-Since semantics for delta CRL fetching and
ensuring an accurate number is stored.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* enable registering backend muxed plugins in plugin catalog
* set the sysview on the pluginconfig to allow enabling secrets/auth plugins
* store backend instances in map
* store single implementations in the instances map
cleanup instance map and ensure we don't deadlock
* fix system backend unit tests
move GetMultiplexIDFromContext to pluginutil package
fix pluginutil test
fix dbplugin ut
* return error(s) if we can't get the plugin client
update comments
* refactor/move GetMultiplexIDFromContext test
* add changelog
* remove unnecessary field on pluginClient
* add unit tests to PluginCatalog for secrets/auth plugins
* fix comment
* return pluginClient from TestRunTestPlugin
* add multiplexed backend test
* honor metadatamode value in newbackend pluginconfig
* check that connection exists on cleanup
* add automtls to secrets/auth plugins
* don't remove apiclientmeta parsing
* use formatting directive for fmt.Errorf
* fix ut: remove tls provider func
* remove tlsproviderfunc from backend plugin tests
* use env var to prevent test plugin from running as a unit test
* WIP: remove lazy loading
* move non lazy loaded backend to new package
* use version wrapper for backend plugin factory
* remove backendVersionWrapper type
* implement getBackendPluginType for plugin catalog
* handle backend plugin v4 registration
* add plugin automtls env guard
* modify plugin factory to determine the backend to use
* remove old pluginsets from v5 and log pid in plugin catalog
* add reload mechanism via context
* readd v3 and v4 to pluginset
* call cleanup from reload if non-muxed
* move v5 backend code to new package
* use context reload for for ErrPluginShutdown case
* add wrapper on v5 backend
* fix run config UTs
* fix unit tests
- use v4/v5 mapping for plugin versions
- fix test build err
- add reload method on fakePluginClient
- add multiplexed cases for integration tests
* remove comment and update AutoMTLS field in test
* remove comment
* remove errwrap and unused context
* only support metadatamode false for v5 backend plugins
* update plugin catalog errors
* use const for env variables
* rename locks and remove unused
* remove unneeded nil check
* improvements based on staticcheck recommendations
* use const for single implementation string
* use const for context key
* use info default log level
* move pid to pluginClient struct
* remove v3 and v4 from multiplexed plugin set
* return from reload when non-multiplexed
* update automtls env string
* combine getBackend and getBrokeredClient
* update comments for plugin reload, Backend return val and log
* revert Backend return type
* allow non-muxed plugins to serve v5
* move v5 code to existing sdk plugin package
* do next export sdk fields now that we have removed extra plugin pkg
* set TLSProvider in ServeMultiplex for backwards compat
* use bool to flag multiplexing support on grpc backend server
* revert userpass main.go
* refactor plugin sdk
- update comments
- make use of multiplexing boolean and single implementation ID const
* update comment and use multierr
* attempt v4 if dispense fails on getPluginTypeForUnknown
* update comments on sdk plugin backend
* honor header if-modified-since if present
* pathGetIssuerCRL first version
* check if modified since for CA endpoints
* fix date comparison for CA endpoints
* suggested changes and refactoring
* add writeIssuer to updateDefaultIssuerId and fix error
* Move methods out of storage.go into util.go
For the most part, these take a SC as param, but aren't directly storage
relevant operations. Move them out of storage.go as a result.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use UTC timezone for storage
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rework path_fetch for better if-modified-since handling
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Invalidate all issuers, CRLs on default write
When the default is updated, access under earlier timestamps will not
work as we're unclear if the timestamp is for this issuer or a previous
issuer. Thus, we need to invalidate the CRL and both issuers involved
(previous, next) by updating their LastModifiedTimes.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for If-Modified-Since
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly invalidate default issuer changes
When the default issuer changes, we'll have to mark the invalidation on
PR secondary clusters, so they know to update their CRL mapping as well.
The swapped issuers will have an updated modification time (which will
eventually replicate down and thus be correct), but the CRL modification
time is cluster-local information and thus won't be replicated.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* make fmt
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor sendNotModifiedResponseIfNecessary
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on if-modified-since
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow generation of up-to-date delta CRLs
While switching to periodic rebuilds of CRLs alleviates the constant
rebuild pressure on Vault during times of high revocation, the CRL
proper becomes stale. One response to this is to switch to OCSP, but not
every system has support for this. Additionally, OCSP usually requires
connectivity and isn't used to augment a pre-distributed CRL (and is
instead used independently).
By generating delta CRLs containing only new revocations, an existing
CRL can be supplemented with newer revocations without requiring Vault
to rebuild all complete CRLs. Admins can periodically fetch the delta
CRL and add it to the existing CRL and applications should be able to
support using serials from both.
Because delta CRLs are emptied when the next complete CRL is rebuilt, it
is important that applications fetch the delta CRL and correlate it to
their complete CRL; if their complete CRL is older than the delta CRL's
extension number, applications MUST fetch the newer complete CRL to
ensure they have a correct combination.
This modifies the revocation process and adds several new configuration
options, controlling whether Delta CRLs are enabled and when we'll
rebuild it.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for delta CRLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on delta CRLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address review feedback: fix several bugs
Thanks Steve!
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly invoke periodic func on active nodes
We need to ensure we read the updated config (in case of OCSP request
handling on standby nodes), but otherwise want to avoid CRL/DeltaCRL
re-building.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* VAULT-6433 Add namespace_path to MFA endpoints
* VAULT-6433 add changelog
* VAULT-6433 Return error in case of error
* VAULT-6433 Make logic a bit more concise
* Refactor tidy steps into two separate helpers
This refactors the tidy go routine into two separate helpers, making it
clear where the boundaries of each are: variables are passed into these
method and concerns are separated. As more operations are rolled into
tidy, we can continue adding more helpers as appropriate. Additionally,
as we move to make auto-tidy occur, we can use these as points to hook
into periodic tidying.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor revInfo checking to helper
This allows us to validate whether or not a revInfo entry contains a
presently valid issuer, from the existing mapping. Coupled with the
changeset to identify the issuer on revocation, we can begin adding
capabilities to tidy to update this association, decreasing CRL build
time and increasing the performance of OCSP.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor issuer fetching for revocation purposes
Revocation needs to gracefully handle using the old legacy cert bundle,
so fetching issuers (and parsing them) needs to be done slightly
differently than other places. Refactor this from revokeCert into a
common helper that can be used by tidy.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow tidy to associate revoked certs, issuers
When revoking a certificate, we need to associate the issuer that signed
its certificate back to the revInfo entry. Historically this was
performed during CRL building (and still remains so), but when running
without CRL building and with only OCSP, performance will degrade as the
issuer needs to be found each time.
Instead, allow the tidy operation to take over this role, allowing us to
increase the performance of OCSP and CRL in this scenario, by decoupling
issuer identification from CRL building in the ideal case.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for tidy updates
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on new tidy parameter, metrics
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor tidy config into shared struct
Finish adding metrics, status messages about new tidy operation.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* revert to using paramsFor but add check for state having ns=
* revert to using paramsFor but add check for state having ns=
* cleanup hook
* add tests
* add changelog
* Test troubleshooting
* cleanup tests, use window stub correctly!
* add test for state param not existing at all
Co-authored-by: hashishaw <cshaw@hashicorp.com>
* Agent parameters: & example corrected and another added with inter-links between agent-template and agent-config pages.
* Agent parameters - typo in template_config description / text.
* Update google-cloud-storage backend documentation
Add mentions the environment variables that can be used to configure the backend instead of using the stanza parameters
* Add changelog file
* Fix some typos
* Update website/content/docs/configuration/storage/google-cloud-storage.mdx
Commit suggestion #1
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* Update website/content/docs/configuration/storage/google-cloud-storage.mdx
Commit suggestion #2
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* Update website/content/docs/configuration/storage/google-cloud-storage.mdx
Commit suggestion #3
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
Adds support for using semantic version information when registering
and managing plugins. New `detailed` field in the response data for listing
plugins and new `version` field in the response data for reading a
single plugin.
* Add ocsp_expiry configuration field to PKI crl config
- Add a new configurable duration field to the crl configuration to
allow operator control of how long an OCSP response can be cached
for.
- This is useful for how long a server like NGINX/Apache is
allowed to cache the response for OCSP stapling.
- A value of 0 means no one should cache the response.
- Address an issue discovered that we did not upgrade existing crl
configurations properly
* PR feedback
* Refactor CRL tests to use /sys/mounts
Thanks Steve for the approach! This also address nits from Kit.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Skip CRL building steps when disabled
This skips a number of steps during CRL build when it is disabled (and
forceNew is not set). In particular, we avoid fetching issuers, we avoid
associating issuers with revocation entries (and building that in-memory
mapping), making CRL building more efficient.
This means that there'll again be very little overhead on clusters with
the CRL disabled.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Prevent revoking roots from appearing on own CRLs
This change ensures that when marking a root as revoked, it no longer
appears on its own CRL. Very few clients support this event (as
generally only leaves/intermediates are checked for presence on a
parent's CRL) and it is technically undefined behavior (if the root is
revoked, its own CRL should be untrusted and thus including it on its
own CRL isn't a safe/correct distribution channel).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure stability of revInfo issuer identification
As mentioned by Kit, iterating through each revInfoEntry and associating
the first issuer which matches it can cause churn when many (equivalent)
issuers are in the system and issuers come and go (via CRLSigning usage,
which has been modified in this release as well). Because we'd not
include issuers without CRLSigning usage, we'd cause our verification
helper, isRevInfoIssuerValid, to think the issuer ID is no longer value
(when instead, it just lacks crlSigning bits).
We address this by pulling in all issuers we know of for the
identification. This allows us to keep valid-but-not-for-signing
issuers, and use other representatives of their identity set for
signing/building the CRL (if they are enabled for such usage).
As a side effect, we now no longer place these entries on the default
CRL in the event all issuers in the CRL set are without the usage.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
This is only for the last commit.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
v6 was released in the last 24h, and our tests fail to connect to the db when v6 is used.
Using v6 needs investigating, but for now I'm pinning to the last known good version.
* Identify issuer on revocation
When we attempt to revoke a leaf certificate, we already parse all of
the issuers within the mount (to x509.Certificate) to ensure we don't
accidentally revoke an issuer via the leaf revocation endpoint. We can
reuse this information to associate the issuer (via issuer/subject
comparison and signature checking) to the revoked cert in its revocation
info. This will help OCSP, avoiding the case where the OCSP handler
needs to associate a certificate to its issuer.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test to ensure issuers are identified
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow correct importing of certs without CRL KU
When Vault imports certificates without KU for CRLSign, we shouldn't
provision CRLUsage on the backing issuer; otherwise, we'll attempt to
build CRLs and Go will cause us to err out. This change makes it clear
(at issuer configuration time) that we can't possibly support this
operation and hopefully prevent users from running into the more cryptic
Go error.
Note that this does not apply for OCSP EKU: the EKU exists, per RFC 6960
Section 2.6 OCSP Signature Authority Delegation, to allow delegation of
OCSP signing to a child certificate. This EKU is not necessary on the
issuer itself, and generally assumes issuers are allowed to issue OCSP
responses regardless of KU/EKU.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs to clarify issue with import, CRL usage
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update website/content/api-docs/secret/pki.mdx
* Add additional test assertion
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update seal.mdx
The following sentence does not read easily:
"Take down the old active node, update its configuration of the old active node to use the new seal blocks (completely unaware of the old seal type) and bring it back up."
I have changed this to the sentence below, which I believe reads better.
Take down the old active node, update its configuration to use the new seal blocks (completely unaware of the old seal type) and bring it back up.
* Update website/content/docs/concepts/seal.mdx
* trigger ci
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
Co-authored-by: taoism4504 <loann@hashicorp.com>
* updated usage example
* Docs: updated examples with base64 - removed herestring for echo instead that's more simple.
* Docs: updated examples with base64 - removed herestring for echo instead that's more simple.
Co-authored-by: Mehdi Ahmadi <aphorise@gmail.com>
* Handle multiple matching issuers in OCSP requests
- Select the first issuer that matches our request hashes and has
the OCSP signing usage enabled. This might not match the exact
issuer id that issued the certificate but the signatures will be
okay.
* PR feedback
