* pki: add subject key identifier to read key response
This will be helpful for the Terraform Vault Provider to detect
migration of pre-1.11 exported keys (from CA generation) into post-1.11
Vault.
* add changelog
* Update builtin/logical/pki/path_fetch_keys.go
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
* check for managed key first
* Validate the SKID matches on root CAs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Validate SKID matches on int CAs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix formatting of tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Do not set use_csr_values when issuing ACME certs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure CSRs with Basic Constraints are rejected
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test to ensure CA certificates cannot be issued
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update builtin/logical/pkiext/pkiext_binary/acme_test.go
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Update builtin/logical/pkiext/pkiext_binary/acme_test.go
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Update acme_test.go to include certutil
* Update acme_test.go - unused imports, reformat
* Update acme_test.go - hex really was used
This is why I can't use the GH web editor. :-)
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Add stub ACME billing interfaces
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add initial implementation of client count
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly attribute to mount, namespace
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor adding entities of custom types
This begins to add custom types of events; presently these are counted
as non-entity tokens, but prefixed with a custom ClientID prefix.
In the future, this will be the basis for counting these events
separately (into separate buckets and separate storage segments).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor creation of ACME mounts
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test case for billing
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Better support managed key system view casting
Without an additional parameter, SystemView could be of a different
internal implementation type that cannot be directly casted to in OSS.
Use a separate parameter for the managed key system view to use instead.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor creation of mounts for enterprise
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Validate mounts in ACME billing tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use a hopefully unique separator for encoded identifiers
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use mount accesor, not path
Co-authored-by: miagilepner <mia.epner@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rename AddEventToFragment->AddActivityToFragment
Co-authored-by: Mike Palmiotto <mike.palmiotto@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: miagilepner <mia.epner@hashicorp.com>
Co-authored-by: Mike Palmiotto <mike.palmiotto@hashicorp.com>
* VAULT-15547 First pass at agent/proxy decoupling
* VAULT-15547 Fix some imports
* VAULT-15547 cases instead of string.Title
* VAULT-15547 changelog
* VAULT-15547 Fix some imports
* VAULT-15547 some more dependency updates
* VAULT-15547 More dependency paths
* VAULT-15547 godocs for tests
* VAULT-15547 godocs for tests
* VAULT-15547 test package updates
* VAULT-15547 test packages
* VAULT-15547 add proxy to test packages
* VAULT-15547 gitignore
* VAULT-15547 address comments
* VAULT-15547 Some typos and small fixes
* import rsa and ecdsa public keys
* allow import_version to update public keys - wip
* allow import_version to update public keys
* move check key fields into func
* put private/public keys in same switch cases
* fix method in UpdateKeyVersion
* move asymmetrics keys switch to its own method - WIP
* test import public and update it with private counterpart
* test import public keys
* use public_key to encrypt if RSAKey is not present and failed to decrypt
if key version does not have a private key
* move key to KeyEntry parsing from Policy to KeyEntry method
* move extracting of key from input fields into helper function
* change back policy Import signature to keep backwards compatibility and
add new method to import private or public keys
* test import with imported public rsa and ecdsa keys
* descriptions and error messages
* error messages, remove comments and unused code
* changelog
* documentation - wip
* suggested changes - error messages/typos and unwrap public key passed
* fix unwrap key error
* fail if both key fields have been set
* fix in extractKeyFromFields, passing a PolicyRequest wouldn't not work
* checks for read, sign and verify endpoints so they don't return errors when a private key was not imported and tests
* handle panic on "export key" endpoint if imported key is public
* fmt
* remove 'isPrivateKey' argument from 'UpdateKeyVersion' and
'parseFromKey' methods
also: rename 'UpdateKeyVersion' method to 'ImportPrivateKeyForVersion' and 'IsPublicKeyImported' to 'IsPrivateKeyMissing'
* delete 'RSAPublicKey' when private key is imported
* path_export: return public_key for ecdsa and rsa when there's no private key imported
* allow signed data validation with pss algorithm
* remove NOTE comment
* fix typo in EC public key export where empty derBytes was being used
* export rsa public key in pkcs8 format instead of pkcs1 and improve test
* change logic on how check for is private key missing is calculated
---------
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Export DockerAPI for use by other consumers
As usage of DockerCluster gets more advanced, some users may want to
interact with the container nodes of the cluster. While, if you already
have a DockerAPI instance lying around you can reuse that safely, for
use cases where an existing e.g., docker/testhelpers's runner instance
is not available, reusing the existing cluster's DockerAPI is easiest.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add ability to exec commands without runner
When modifying DockerTestCluster's containers manually, we might not
have a Runner instance; instead, expose the ability to run commands via
a DockerAPI instance directly, as they're awfully convenient.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add DNS resolver into ACME tests
This updates the pkiext_binary tests to use an adjacent DNS resolver,
allowing these tests to eventually be extended to solve DNS challenges,
as modifying the /etc/hosts file does not allow this.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix loading DNS resolver onto network
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix bug with DNS configuration validation
Both conditionals here were inverted: address being empty means a bad
specification was given, and the parse being nil means that it was not a
valid IP address.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix specifying TXT records, allow removing records
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Handle caching of ACME config
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add DNS resolvers to ACME configuration
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add custom DNS resolver to challenge verification
This required plumbing through the config, reloading it when necessary,
and creating a custom net.Resolver instance.
Not immediately clear is how we'd go about building a custom DNS
validation mechanism that supported multiple resolvers. Likely we'd need
to rely on meikg/dns and handle the resolution separately for each
container and use a custom Dialer that assumes the address is already
pre-resolved.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Improvements to Docker harness
- Expose additional service information, allowing callers to figure out
both the local address and the network-specific address of the
service container, and
- Allow modifying permissions on uploaded container files.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add infrastructure to run Bind9 in a container for tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Validate DNS-01 challenge works
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* remove intercepting helpText
* add subtext directly to StringList input component
* update tests and add coverage for new openapi-attrs util
* update test
* add warning validation to input
* lol is this right i dont know go
* literally no idea what im doing
* add Description to display attrs struct
* update struct comment
* add descriptions to remaining go fields
* add missing comma
* remaining commas..."
* add description to display attrs
* update tests
* update tests
* add changelog;
* Update ui/app/utils/openapi-to-attrs.js
* update tests following backend changes
* clearly name variable
* format files
* no longer need to test for modified tooltip since coming from backend now
* Add fix for Go x/crypto/ocsp failure case
When calling ocsp.ParseRequest(req, issue) with a non-nil issuer on a
ocsp request which _unknowingly_ contains an entry in the
BasicOCSPResponse's certs field, Go incorrectly assumes that the issuer
is a direct parent of the _first_ certificate in the certs field,
discarding the rest.
As documented in the Go issue, this is not a valid assumption and thus
causes OCSP verification to fail in Vault with an error like:
> bad OCSP signature: crypto/rsa: verification error
which ultimately leads to a cert auth login error of:
> no chain matching all constraints could be found for this login certificate
We address this by using the unsafe issuer=nil argument, taking on the
task of validating the OCSP response's signature as best we can in the
absence of full chain information on either side (both the trusted
certificate whose OCSP response we're verifying and the lack of any
additional certs the OCSP responder may have sent).
See also: https://github.com/golang/go/issues/59641
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test case with Vault PKI
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add header operation to sdk/logical
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add support for routing HEAD operations
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add support for importing RSA-PSS keys in Transit
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* bug: correct handling of the zero int64 value
* Update changelog/18729.txt
---------
Co-authored-by: valli_0x <personallune@mail.ru>
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
* impr(auth/ldap): allow to dereference aliases in searches
* docs: add documentation for LDAP alias dereferencing
* chore(auth/ldap): add changelog entry for PR 18230
* chore: run formatter
* fix: update default LDAP configuration with new default
* Update website/content/docs/auth/ldap.mdx
Co-authored-by: tjperry07 <tjperry07@users.noreply.github.com>
* docs(ldap): add alias dereferencing to API docs for LDAP
---------
Co-authored-by: tjperry07 <tjperry07@users.noreply.github.com>
Mirror NSS's GET-vs-POST selection criteria, wherein GET is preferred
over POST (as the former might be a response from a cached CDN entry,
whereas the latter might hit a live responder). However, only accept it
if it definitively says "Good" or "Revoked" -- trigger a POST request
when an unknown or failure status is seen.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
The [WebSockets spec](https://www.rfc-editor.org/rfc/rfc6455) states
that text messages must be valid UTF-8 encoded strings, which protobuf
messages virtually never are. This now correctly sends the protobuf events
as binary messages.
We change the format to correspond to CloudEvents, as originally intended,
and remove a redundant timestamp and newline.
We also bump the eventlogger to fix a race condition that this code triggers.
* add RequestResponseCallback to core/options
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* pass in router and apply function on requests
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* add callback
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* cleanup
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Anton Averchenkov <84287187+averche@users.noreply.github.com>
* Update vault/core.go
* bad typo...
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* use pvt interface, can't downcast to child struct
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* finer grained errors
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* trim path for backend
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* remove entire mount point instead of just the first part of url
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* Update vault/testing.go
Co-authored-by: Anton Averchenkov <84287187+averche@users.noreply.github.com>
* add doc string
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* update docstring
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* reformat
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
* added changelog
---------
Signed-off-by: Daniel Huckins <dhuckins@users.noreply.github.com>
Co-authored-by: Anton Averchenkov <84287187+averche@users.noreply.github.com>
Also updates the event receieved to include a timestamp.
Websockets support both JSON and protobuf binary formats.
This can be used by either `wscat` or the new
`vault events subscribe`:
e.g.,
```sh
$ wscat -H "X-Vault-Token: $(vault print token)" --connect ws://127.0.0.1:8200/v1/sys/events/subscribe/abc?json=true
{"event":{"id":"5c5c8c83-bf43-7da5-fe88-fc3cac814b2e", "note":"testing"}, "eventType":"abc", "timestamp":"2023-02-07T18:40:50.598408Z"}
...
```
and
```sh
$ vault events subscribe abc
{"event":{"id":"5c5c8c83-bf43-7da5-fe88-fc3cac814b2e", "note":"testing"}, "eventType":"abc", "timestamp":"2023-02-07T18:40:50.598408Z"}
...
```
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
John-Michael Faircloth