* [VAULT-1618] Agent error log level is mismatched
`logLevelToStringPtr` translates `go-hclog`'s `ERROR` to `"ERROR"` for
Consul Template's runner, but that expects `ERR` and is quite strict
about it.
This will address https://github.com/hashicorp/vault-k8s/issues/223
after it is set as the default image in `vault-k8s`.
I didn't find a simple way to test this other than starting up a full
server and agent and letting them run, which is unfortunately fairly
slow.
I confirmed that this addresses the original issue by modifying the helm
chart with the values in this commit and patching the log level to `err`.
* VAULT-1618 Add changelog/14424.txt
* VAULT-1618 Update changelog/14424.txt based on @kalafut suggestion
Co-authored-by: Jim Kalafut <jkalafut@hashicorp.com>
* VAULT-1618 Move cancel and server stop into defer in tests
* VAULT-1618 Triggering CircleCI tests
* VAULT-1618 Replace ioutil with os functions for agent template tests
Co-authored-by: Jim Kalafut <jkalafut@hashicorp.com>
Uses a bufconn listener between consul-template and vault-agent when
caching is enabled and either templates or a listener is defined. This
means no listeners need to be defined in vault-agent for just
templating. Always routes consul-template through the vault-agent
cache (instead of only when persistent cache is enabled).
Uses a local transportDialer interface in config.Cache{}.
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
Co-authored-by: Ben Ash <32777270+benashz@users.noreply.github.com>
* agent: restart template runner on retry for unlimited retries
* template: log error message early
* template: delegate retries back to template if param is set to true
* agent: add and use the new template config stanza
* agent: fix panic, fix existing tests
* changelog: add changelog entry
* agent: add tests for exit_on_retry_failure
* agent: properly check on agent exit cases, add separate tests for missing key vs missing secrets
* agent: add note on difference between missing key vs missing secret
* docs: add docs for template_config
* Update website/content/docs/agent/template-config.mdx
Co-authored-by: Jason O'Donnell <2160810+jasonodonnell@users.noreply.github.com>
* Update website/content/docs/agent/template-config.mdx
Co-authored-by: Jason O'Donnell <2160810+jasonodonnell@users.noreply.github.com>
* Update website/content/docs/agent/template-config.mdx
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
* Update website/content/docs/agent/template-config.mdx
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
* Update website/content/docs/agent/template-config.mdx
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
* docs: fix exit_on_retry_failure, fix Functionality section
* docs: update interaction title
* template: add internal note on behavior for persist case
* docs: update agent, template, and template-config docs
* docs: update agent docs on retry stanza
* Apply suggestions from code review
Co-authored-by: Jim Kalafut <jkalafut@hashicorp.com>
Co-authored-by: Theron Voran <tvoran@users.noreply.github.com>
* Update changelog/11775.txt
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* agent/test: rename expectExit to expectExitFromError
* agent/test: add check on early exits on the happy path
* Update website/content/docs/agent/template-config.mdx
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
Co-authored-by: Jason O'Donnell <2160810+jasonodonnell@users.noreply.github.com>
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
Co-authored-by: Jim Kalafut <jkalafut@hashicorp.com>
Co-authored-by: Theron Voran <tvoran@users.noreply.github.com>
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
Remove template_retry config section. Add new vault.retry section which only has num_retries field; if num_retries is 0 or absent, default it to 12 for backwards compat with pre-1.7 template retrying. Setting num_retries=-1 disables retries.
Configured retries are used for both templating and api proxy, though if template requests go through proxy (currently requires persistence enabled) we'll only configure retries for the latter to avoid duplicate retrying. Though there is some duplicate retrying already because whenever the template server does a retry when not going through the proxy, the Vault client it uses allows for 2 behind-the-scenes retries for some 400/500 http error codes.
Adds the option of a write-through cache, backed by boltdb
Co-authored-by: Theron Voran <tvoran@users.noreply.github.com>
Co-authored-by: Jason O'Donnell <2160810+jasonodonnell@users.noreply.github.com>
Co-authored-by: Calvin Leung Huang <cleung2010@gmail.com>
* feat(agent): add retry configuration for vault agent
* feat(agent): add test fixtures for retry
* fix(retry): move retry stanza to top level as template_retry
* fix(retry): add retry config to ServerConfig struct
* fix(retry): point config parser to parse template_retry instead of retry
* remove netlify config (#10711)
* Fix build (#10749)
* Move the declaration to a OSS build tag file to not have it collide w… (#10750)
* Move the declaration to a OSS build tag file to not have it collide with ent declarations
* Add comment
* Remove comment to trigger ci
* Unconditionally use the root namespace when calling sys/seal-status. (#10742)
* feat(agent): add retry configuration for vault agent
* feat(agent): add test fixtures for retry
* fix(retry): move retry stanza to top level as template_retry
* fix(retry): add retry config to ServerConfig struct
* fix(retry): point config parser to parse template_retry instead of retry
Co-authored-by: Hridoy Roy <roy@hashicorp.com>
Co-authored-by: Jeff Escalante <jescalan@users.noreply.github.com>
Co-authored-by: Vishal Nayak <vishalnayak@users.noreply.github.com>
Co-authored-by: Mark Gritter <mgritter@hashicorp.com>
* agent: return a non-zero exit code on error
* agent/template: always return on template server error, add case for error_on_missing_key
* agent: fix tests by updating Run params to use an errCh
* agent/template: add permission denied test case, clean up test var
* agent: use unbuffered errCh, emit fatal errors directly to the UI output
* agent: use oklog's run.Group to schedule subsystem runners (#9761)
* agent: use oklog's run.Group to schedule subsystem runners
* agent: clean up unused DoneCh, clean up agent's main Run func
* agent/template: use ts.stopped.CAS to atomically swap value
* fix tests
* fix tests
* agent/template: add timeout on TestRunServer
* agent: output error via logs and return a generic error on non-zero exit
* fix TestAgent_ExitAfterAuth
* agent/template: do not restart ct runner on new incoming token if exit_after_auth is set to true
* agent: drain ah.OutputCh after sink exits to avoid blocking on the channel
* use context.WithTimeout, expand comments around ordering of defer cancel()
* add regression test for #7883
* Add logic to count render events and match them to expected
* remove the WAIT label and make some changes to remove the break statements
* change the 'randomness' of the templateContents test helper method
* Vault Agent Template: parse templates (#7540)
* add template config parsing, but it's wrong b/c it's not using mapstructure
* parsing consul templates in agent config
* add additional test to configuration parsing, to cover basics
* another test fixture, rework simple test into table
* refactor into table test
* rename test
* remove flattenKeys and add other test fixture
* Update command/agent/config/config.go
Co-Authored-By: Jim Kalafut <jkalafut@hashicorp.com>
* return the decode error instead of swallowing it
* Update command/agent/config/config_test.go
Co-Authored-By: Jim Kalafut <jkalafut@hashicorp.com>
* go mod tidy
* change error checking style
* Add agent template doc
* TemplateServer: render secrets with Consul Template (#7621)
* add template config parsing, but it's wrong b/c it's not using mapstructure
* parsing consul templates in agent config
* add additional test to configuration parsing, to cover basics
* another test fixture, rework simple test into table
* refactor into table test
* rename test
* remove flattenKeys and add other test fixture
* add template package
* WIP: add runner
* fix panic, actually copy templates, etc
* rework how the config.Vault is created and enable reading from the environment
* this was supposed to be a part of the prior commit
* move/add methods to testhelpers for converting some values to pointers
* use new methods in testhelpers
* add an unblock channel to block agent until a template has been rendered
* add note
* unblock if there are no templates
* cleanups
* go mod tidy
* remove dead code
* simple test to starT
* add simple, empty templates test
* Update package doc, error logs, and add missing close() on channel
* update code comment to be clear what I'm referring to
* have template.NewServer return a (<- chan) type, even though it's a normal chan, as a better practice to enforce reading only
* Update command/agent.go
Co-Authored-By: Jim Kalafut <jkalafut@hashicorp.com>
* update with test
* Add README and doc.go to the command/agent directory (#7503)
* Add README and doc.go to the command/agent directory
* Add link to website
* address feedback for agent.go
* updated with feedback from Calvin
* Rework template.Server to export the unblock channel, and remove it from the NewServer function
* apply feedback from Nick
* fix/restructure rendering test
* Add pointerutil package for converting types to their pointers
* Remove pointer helper methods; use sdk/helper/pointerutil instead
* update newRunnerConfig to use pointerutil and empty strings
* only wait for unblock if template server is initialized
* update test structure
* some test cleanup
* follow up tests
* remove debugging, fix issue in replacing runner config
* need to handle first render/token
* Simplify the blocking logic to support exit after auth
* fix channel name
* expand TestAgent_Template to include multiple scenarios
* cleanup
* test cleanups after feedback
* Vault Agent Template: parse templates (#7540)
* add template config parsing, but it's wrong b/c it's not using mapstructure
* parsing consul templates in agent config
* add additional test to configuration parsing, to cover basics
* another test fixture, rework simple test into table
* refactor into table test
* rename test
* remove flattenKeys and add other test fixture
* Update command/agent/config/config.go
Co-Authored-By: Jim Kalafut <jkalafut@hashicorp.com>
* return the decode error instead of swallowing it
* Update command/agent/config/config_test.go
Co-Authored-By: Jim Kalafut <jkalafut@hashicorp.com>
* go mod tidy
* change error checking style
* Add agent template doc
* TemplateServer: render secrets with Consul Template (#7621)
* add template config parsing, but it's wrong b/c it's not using mapstructure
* parsing consul templates in agent config
* add additional test to configuration parsing, to cover basics
* another test fixture, rework simple test into table
* refactor into table test
* rename test
* remove flattenKeys and add other test fixture
* add template package
* WIP: add runner
* fix panic, actually copy templates, etc
* rework how the config.Vault is created and enable reading from the environment
* this was supposed to be a part of the prior commit
* move/add methods to testhelpers for converting some values to pointers
* use new methods in testhelpers
* add an unblock channel to block agent until a template has been rendered
* add note
* unblock if there are no templates
* cleanups
* go mod tidy
* remove dead code
* simple test to starT
* add simple, empty templates test
* Update package doc, error logs, and add missing close() on channel
* update code comment to be clear what I'm referring to
* have template.NewServer return a (<- chan) type, even though it's a normal chan, as a better practice to enforce reading only
* Update command/agent.go
Co-Authored-By: Jim Kalafut <jkalafut@hashicorp.com>
* update with test
* Add README and doc.go to the command/agent directory (#7503)
* Add README and doc.go to the command/agent directory
* Add link to website
* address feedback for agent.go
* updated with feedback from Calvin
* Rework template.Server to export the unblock channel, and remove it from the NewServer function
* apply feedback from Nick
* fix/restructure rendering test
* Add pointerutil package for converting types to their pointers
* Remove pointer helper methods; use sdk/helper/pointerutil instead
* update newRunnerConfig to use pointerutil and empty strings
* only wait for unblock if template server is initialized
* drain the token channel in this test
* conditionally send on channel
