* raft: initial work on raft ha storage support
* add note on join
* add todo note
* raft: add support for bootstrapping and joining existing nodes
* raft: gate bootstrap join by reading leader api address from storage
* raft: properly check for raft-only for certain conditionals
* raft: add bootstrap to api and cli
* raft: fix bootstrap cli command
* raft: add test for setting up new cluster with raft HA
* raft: extend TestRaft_HA_NewCluster to include inmem and consul backends
* raft: add test for updating an existing cluster to use raft HA
* raft: remove debug log lines, clean up verifyRaftPeers
* raft: minor cleanup
* raft: minor cleanup
* Update physical/raft/raft.go
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* Update vault/ha.go
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* Update vault/ha.go
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* Update vault/logical_system_raft.go
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* Update vault/raft.go
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* Update vault/raft.go
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* address feedback comments
* address feedback comments
* raft: refactor tls keyring logic
* address feedback comments
* Update vault/raft.go
Co-authored-by: Alexander Bezobchuk <alexanderbez@users.noreply.github.com>
* Update vault/raft.go
Co-authored-by: Alexander Bezobchuk <alexanderbez@users.noreply.github.com>
* address feedback comments
* testing: fix import ordering
* raft: rename var, cleanup comment line
* docs: remove ha_storage restriction note on raft
* docs: more raft HA interaction updates with migration and recovery mode
* docs: update the raft join command
* raft: update comments
* raft: add missing isRaftHAOnly check for clearing out state set earlier
* raft: update a few ha_storage config checks
* Update command/operator_raft_bootstrap.go
Co-authored-by: Vishal Nayak <vishalnayak@users.noreply.github.com>
* raft: address feedback comments
* raft: fix panic when checking for config.HAStorage.Type
* Update vault/raft.go
Co-authored-by: Alexander Bezobchuk <alexanderbez@users.noreply.github.com>
* Update website/pages/docs/commands/operator/raft.mdx
Co-authored-by: Alexander Bezobchuk <alexanderbez@users.noreply.github.com>
* raft: remove bootstrap cli command
* Update vault/raft.go
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* Update vault/raft.go
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* raft: address review feedback
* raft: revert vendored sdk
* raft: don't send applied index and node ID info if we're HA-only
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
Co-authored-by: Alexander Bezobchuk <alexanderbez@users.noreply.github.com>
Co-authored-by: Vishal Nayak <vishalnayak@users.noreply.github.com>
* enable seal wrap in all seal migration tests
* move adjustForSealMigration to vault package
* fix adjustForSealMigration
* begin working on new seal migration test
* create shamir seal migration test
* refactor testhelpers
* add VerifyRaftConfiguration to testhelpers
* stub out TestTransit
* Revert "refactor testhelpers"
This reverts commit 39593defd0d4c6fd79aedfd37df6298391abb9db.
* get shamir test working again
* stub out transit join
* work on transit join
* Revert "move resuable storage test to avoid creating import cycle"
This reverts commit b3ff2317381a5af12a53117f87d1c6fbb093af6b.
* remove debug code
* initTransit now works with raft join
* runTransit works with inmem
* work on runTransit with raft
* runTransit works with raft
* get rid of dis-used test
* cleanup tests
* TestSealMigration_TransitToShamir_Pre14
* TestSealMigration_ShamirToTransit_Pre14
* split for pre-1.4 testing
* add simple tests for transit and shamir
* fix typo in test suite
* debug wrapper type
* test debug
* test-debug
* refactor core migration
* Revert "refactor core migration"
This reverts commit a776452d32a9dca7a51e3df4a76b9234d8c0c7ce.
* begin refactor of adjustForSealMigration
* fix bug in adjustForSealMigration
* clean up tests
* clean up core refactoring
* fix bug in shamir->transit migration
* remove unnecessary lock from setSealsForMigration()
* rename sealmigration test package
* use ephemeral ports below 30000
* simplify use of numTestCores
* serivceregistration: refactor service registration logic to run later
* move state check to the internal func
* sr/kubernetes: update setInitialStateInternal godoc
* sr/kubernetes: remove return in setInitialState
* core/test: fix mockServiceRegistration
* address review feedback
* raft: check for nil on concrete type in SetupCluster
* raft: move check to its own func
* raft: func cleanup
* raft: disallow disable_clustering = true when raft storage is used
* docs: update disable_clustering to mention new behavior
* provide vault server flag to exit on core shutdown
* Update command/server.go
Co-Authored-By: Jeff Mitchell <jeffrey.mitchell@gmail.com>
Co-authored-by: Jeff Mitchell <jeffrey.mitchell@gmail.com>
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* Guard against using Raft as a seperate HA Storage
* Document that Raft cannot be used as a seperate ha_storage backend at this time
* remove duplicate imports from updating with master
* use observer pattern for service discovery
* update perf standby method
* fix test
* revert usersTags to being called serviceTags
* use previous consul code
* vault isnt a performance standby before starting
* log err
* changes from feedback
* add Run method to interface
* changes from feedback
* fix core test
* update example
* Raft retry join
* update
* Make retry join work with shamir seal
* Return upon context completion
* Update vault/raft.go
Co-Authored-By: Brian Kassouf <briankassouf@users.noreply.github.com>
* Address some review comments
* send leader information slice as a parameter
* Make retry join work properly with Shamir case. This commit has a blocking issue
* Fix join goroutine exiting before the job is done
* Polishing changes
* Don't return after a successful join during unseal
* Added config parsing test
* Add test and fix bugs
* minor changes
* Address review comments
* Fix build error
Co-authored-by: Brian Kassouf <briankassouf@users.noreply.github.com>
* move ServiceDiscovery into methods
* add ServiceDiscoveryFactory
* add serviceDiscovery field to vault.Core
* refactor ConsulServiceDiscovery into separate struct
* cleanup
* revert accidental change to go.mod
* cleanup
* get rid of un-needed struct tags in vault.CoreConfig
* add service_discovery parser
* add ServiceDiscovery to config
* cleanup
* cleanup
* add test for ConfigServiceDiscovery to Core
* unit testing for config service_discovery stanza
* cleanup
* get rid of un-needed redirect_addr stuff in service_discovery stanza
* improve test suite
* cleanup
* clean up test a bit
* create docs for service_discovery
* check if service_discovery is configured, but storage does not support HA
* tinker with test
* tinker with test
* tweak docs
* move ServiceDiscovery into its own package
* tweak a variable name
* fix comment
* rename service_discovery to service_registration
* tweak service_registration config
* Revert "tweak service_registration config"
This reverts commit 5509920a8ab4c5a216468f262fc07c98121dce35.
* simplify naming
* refactor into ./serviceregistration/consul
Shamir seals now come in two varieties: legacy and new-style. Legacy
Shamir is automatically converted to new-style when a rekey operation
is performed. All new Vault initializations using Shamir are new-style.
New-style Shamir writes an encrypted master key to storage, just like
AutoUnseal. The stored master key is encrypted using the shared key that
is split via Shamir's algorithm. Thus when unsealing, we take the key
fragments given, combine them into a Key-Encryption-Key, and use that
to decrypt the master key on disk. Then the master key is used to read
the keyring that decrypts the barrier.
* Initial work
* rework
* s/dr/recovery
* Add sys/raw support to recovery mode (#7577)
* Factor the raw paths out so they can be run with a SystemBackend.
# Conflicts:
# vault/logical_system.go
* Add handleLogicalRecovery which is like handleLogical but is only
sufficient for use with the sys-raw endpoint in recovery mode. No
authentication is done yet.
* Integrate with recovery-mode. We now handle unauthenticated sys/raw
requests, albeit on path v1/raw instead v1/sys/raw.
* Use sys/raw instead raw during recovery.
* Don't bother persisting the recovery token. Authenticate sys/raw
requests with it.
* RecoveryMode: Support generate-root for autounseals (#7591)
* Recovery: Abstract config creation and log settings
* Recovery mode integration test. (#7600)
* Recovery: Touch up (#7607)
* Recovery: Touch up
* revert the raw backend creation changes
* Added recovery operation token prefix
* Move RawBackend to its own file
* Update API path and hit it using CLI flag on generate-root
* Fix a panic triggered when handling a request that yields a nil response. (#7618)
* Improve integ test to actually make changes while in recovery mode and
verify they're still there after coming back in regular mode.
* Refuse to allow a second recovery token to be generated.
* Resize raft cluster to size 1 and start as leader (#7626)
* RecoveryMode: Setup raft cluster post unseal (#7635)
* Setup raft cluster post unseal in recovery mode
* Remove marking as unsealed as its not needed
* Address review comments
* Accept only one seal config in recovery mode as there is no scope for migration
When starting a vault dev server the token helper is invoked to store
the dev root token.
This option gives the user the ability to not store the token.
Storing the token can be undesirable in certain circumstances
(e.g. running local tests) as the user's existing vault token is
clobbered without warning.
Fixes#1861
* Read config before creating logger when booting vault server
* Allow for specifying log output in JSON format in a config file, via a 'log_level' flag
* Create parser for log format flag
* Allow for specifying log format in a config file, via a 'log_format' flag. Also, get rid of 'log_json' flag.
* Add 'log-format' command line flag
* Update documentation to include description of log_format setting
* Tweak comment for VAULT_LOG_FORMAT environment variable
* add test for ParseEnvLogFormat()
* clarify how log format is set
* fix typos in documentation
* Work on raft backend
* Add logstore locally
* Add encryptor and unsealable interfaces
* Add clustering support to raft
* Remove client and handler
* Bootstrap raft on init
* Cleanup raft logic a bit
* More raft work
* Work on TLS config
* More work on bootstrapping
* Fix build
* More work on bootstrapping
* More bootstrapping work
* fix build
* Remove consul dep
* Fix build
* merged oss/master into raft-storage
* Work on bootstrapping
* Get bootstrapping to work
* Clean up FMS and node-id
* Update local node ID logic
* Cleanup node-id change
* Work on snapshotting
* Raft: Add remove peer API (#906)
* Add remove peer API
* Add some comments
* Fix existing snapshotting (#909)
* Raft get peers API (#912)
* Read raft configuration
* address review feedback
* Use the Leadership Transfer API to step-down the active node (#918)
* Raft join and unseal using Shamir keys (#917)
* Raft join using shamir
* Store AEAD instead of master key
* Split the raft join process to answer the challenge after a successful unseal
* get the follower to standby state
* Make unseal work
* minor changes
* Some input checks
* reuse the shamir seal access instead of new default seal access
* refactor joinRaftSendAnswer function
* Synchronously send answer in auto-unseal case
* Address review feedback
* Raft snapshots (#910)
* Fix existing snapshotting
* implement the noop snapshotting
* Add comments and switch log libraries
* add some snapshot tests
* add snapshot test file
* add TODO
* More work on raft snapshotting
* progress on the ConfigStore strategy
* Don't use two buckets
* Update the snapshot store logic to hide the file logic
* Add more backend tests
* Cleanup code a bit
* [WIP] Raft recovery (#938)
* Add recovery functionality
* remove fmt.Printfs
* Fix a few fsm bugs
* Add max size value for raft backend (#942)
* Add max size value for raft backend
* Include physical.ErrValueTooLarge in the message
* Raft snapshot Take/Restore API (#926)
* Inital work on raft snapshot APIs
* Always redirect snapshot install/download requests
* More work on the snapshot APIs
* Cleanup code a bit
* On restore handle special cases
* Use the seal to encrypt the sha sum file
* Add sealer mechanism and fix some bugs
* Call restore while state lock is held
* Send restore cb trigger through raft log
* Make error messages nicer
* Add test helpers
* Add snapshot test
* Add shamir unseal test
* Add more raft snapshot API tests
* Fix locking
* Change working to initalize
* Add underlying raw object to test cluster core
* Move leaderUUID to core
* Add raft TLS rotation logic (#950)
* Add TLS rotation logic
* Cleanup logic a bit
* Add/Remove from follower state on add/remove peer
* add comments
* Update more comments
* Update request_forwarding_service.proto
* Make sure we populate all nodes in the followerstate obj
* Update times
* Apply review feedback
* Add more raft config setting (#947)
* Add performance config setting
* Add more config options and fix tests
* Test Raft Recovery (#944)
* Test raft recovery
* Leave out a node during recovery
* remove unused struct
* Update physical/raft/snapshot_test.go
* Update physical/raft/snapshot_test.go
* fix vendoring
* Switch to new raft interface
* Remove unused files
* Switch a gogo -> proto instance
* Remove unneeded vault dep in go.sum
* Update helper/testhelpers/testhelpers.go
Co-Authored-By: Calvin Leung Huang <cleung2010@gmail.com>
* Update vault/cluster/cluster.go
* track active key within the keyring itself (#6915)
* track active key within the keyring itself
* lookup and store using the active key ID
* update docstring
* minor refactor
* Small text fixes (#6912)
* Update physical/raft/raft.go
Co-Authored-By: Calvin Leung Huang <cleung2010@gmail.com>
* review feedback
* Move raft logical system into separate file
* Update help text a bit
* Enforce cluster addr is set and use it for raft bootstrapping
* Fix tests
* fix http test panic
* Pull in latest raft-snapshot library
* Add comment
* http timeout fields are configurable
* move return statement for server config tests outside of range loop
* adds documentation for configurable listener http_* values
* fixed some formatting for the docs markdown
