Go 1.13 flipped TLS 1.3 to opt-out instead of opt-in, and its TLS 1.3
support does not allow configuring cipher suites. Simply remove the
affected test; it's not relevant going forward and there's ample
evidence it works properly prior to Go 1.13.
* Handpick cluster cipher suites when they're not user-set
There is an undocumented way for users to choose cluster cipher suites
but for the most part this is to paper over the fact that there are
undesirable suites in TLS 1.2.
If not explicitly set, have the set of cipher suites for the cluster
port come from a hand-picked list; either the allowed TLS 1.3 set (for
forwards compatibility) or the three identical ones for TLS 1.2.
The 1.2 suites have been supported in Go until at least as far back as
Go 1.9 from two years ago. As a result in cases where no specific suites
have been chosen this _ought_ to have no compatibility issues.
Also includes a useful test script.
* Abstract generate-root authentication into the strategy interface
* Generate root strategy ncabatoff (#7700)
* Adapt to new shamir-as-kek reality.
* Don't try to verify the master key when we might still be sealed (in
recovery mode). Instead, verify it in the authenticate methods.
Shamir seals now come in two varieties: legacy and new-style. Legacy
Shamir is automatically converted to new-style when a rekey operation
is performed. All new Vault initializations using Shamir are new-style.
New-style Shamir writes an encrypted master key to storage, just like
AutoUnseal. The stored master key is encrypted using the shared key that
is split via Shamir's algorithm. Thus when unsealing, we take the key
fragments given, combine them into a Key-Encryption-Key, and use that
to decrypt the master key on disk. Then the master key is used to read
the keyring that decrypts the barrier.
* core: add postSealMigration method
The postSealMigration method is called at the end of the postUnseal
method if a seal migration has occurred. This starts a seal rewrap
process in the enterprise version of. It is a no-op in the OSS version.
* Initial work
* rework
* s/dr/recovery
* Add sys/raw support to recovery mode (#7577)
* Factor the raw paths out so they can be run with a SystemBackend.
# Conflicts:
# vault/logical_system.go
* Add handleLogicalRecovery which is like handleLogical but is only
sufficient for use with the sys-raw endpoint in recovery mode. No
authentication is done yet.
* Integrate with recovery-mode. We now handle unauthenticated sys/raw
requests, albeit on path v1/raw instead v1/sys/raw.
* Use sys/raw instead raw during recovery.
* Don't bother persisting the recovery token. Authenticate sys/raw
requests with it.
* RecoveryMode: Support generate-root for autounseals (#7591)
* Recovery: Abstract config creation and log settings
* Recovery mode integration test. (#7600)
* Recovery: Touch up (#7607)
* Recovery: Touch up
* revert the raw backend creation changes
* Added recovery operation token prefix
* Move RawBackend to its own file
* Update API path and hit it using CLI flag on generate-root
* Fix a panic triggered when handling a request that yields a nil response. (#7618)
* Improve integ test to actually make changes while in recovery mode and
verify they're still there after coming back in regular mode.
* Refuse to allow a second recovery token to be generated.
* Resize raft cluster to size 1 and start as leader (#7626)
* RecoveryMode: Setup raft cluster post unseal (#7635)
* Setup raft cluster post unseal in recovery mode
* Remove marking as unsealed as its not needed
* Address review comments
* Accept only one seal config in recovery mode as there is no scope for migration
Seal keys can be rotated. When this happens, the barrier and recovery
keys should be re-encrypted with the new seal key. This change
automatically re-encrypts the barrier and recovery keys with the latest
seal key on the active node during the 'postUnseal' phase.
* storage/raft: When restoring a snapshot preseal first
* best-effort allow standbys to apply the restoreOp before sealing active node
* Don't cache the raft tls key
* Update physical/raft/raft.go
* Move pending raft peers to core
* Fix race on close bool
* Extend the leaderlease time for tests
* Update raft deps
* Fix audit hashing
* Fix race with auditing
At the level of role config it doesn't mean anything to use
default-service or default-batch; that's for mount tuning. So disallow
it in tokenutil. This also fixes the fact that the switch statement
wasn't right.
* Work on raft backend
* Add logstore locally
* Add encryptor and unsealable interfaces
* Add clustering support to raft
* Remove client and handler
* Bootstrap raft on init
* Cleanup raft logic a bit
* More raft work
* Work on TLS config
* More work on bootstrapping
* Fix build
* More work on bootstrapping
* More bootstrapping work
* fix build
* Remove consul dep
* Fix build
* merged oss/master into raft-storage
* Work on bootstrapping
* Get bootstrapping to work
* Clean up FMS and node-id
* Update local node ID logic
* Cleanup node-id change
* Work on snapshotting
* Raft: Add remove peer API (#906)
* Add remove peer API
* Add some comments
* Fix existing snapshotting (#909)
* Raft get peers API (#912)
* Read raft configuration
* address review feedback
* Use the Leadership Transfer API to step-down the active node (#918)
* Raft join and unseal using Shamir keys (#917)
* Raft join using shamir
* Store AEAD instead of master key
* Split the raft join process to answer the challenge after a successful unseal
* get the follower to standby state
* Make unseal work
* minor changes
* Some input checks
* reuse the shamir seal access instead of new default seal access
* refactor joinRaftSendAnswer function
* Synchronously send answer in auto-unseal case
* Address review feedback
* Raft snapshots (#910)
* Fix existing snapshotting
* implement the noop snapshotting
* Add comments and switch log libraries
* add some snapshot tests
* add snapshot test file
* add TODO
* More work on raft snapshotting
* progress on the ConfigStore strategy
* Don't use two buckets
* Update the snapshot store logic to hide the file logic
* Add more backend tests
* Cleanup code a bit
* [WIP] Raft recovery (#938)
* Add recovery functionality
* remove fmt.Printfs
* Fix a few fsm bugs
* Add max size value for raft backend (#942)
* Add max size value for raft backend
* Include physical.ErrValueTooLarge in the message
* Raft snapshot Take/Restore API (#926)
* Inital work on raft snapshot APIs
* Always redirect snapshot install/download requests
* More work on the snapshot APIs
* Cleanup code a bit
* On restore handle special cases
* Use the seal to encrypt the sha sum file
* Add sealer mechanism and fix some bugs
* Call restore while state lock is held
* Send restore cb trigger through raft log
* Make error messages nicer
* Add test helpers
* Add snapshot test
* Add shamir unseal test
* Add more raft snapshot API tests
* Fix locking
* Change working to initalize
* Add underlying raw object to test cluster core
* Move leaderUUID to core
* Add raft TLS rotation logic (#950)
* Add TLS rotation logic
* Cleanup logic a bit
* Add/Remove from follower state on add/remove peer
* add comments
* Update more comments
* Update request_forwarding_service.proto
* Make sure we populate all nodes in the followerstate obj
* Update times
* Apply review feedback
* Add more raft config setting (#947)
* Add performance config setting
* Add more config options and fix tests
* Test Raft Recovery (#944)
* Test raft recovery
* Leave out a node during recovery
* remove unused struct
* Update physical/raft/snapshot_test.go
* Update physical/raft/snapshot_test.go
* fix vendoring
* Switch to new raft interface
* Remove unused files
* Switch a gogo -> proto instance
* Remove unneeded vault dep in go.sum
* Update helper/testhelpers/testhelpers.go
Co-Authored-By: Calvin Leung Huang <cleung2010@gmail.com>
* Update vault/cluster/cluster.go
* track active key within the keyring itself (#6915)
* track active key within the keyring itself
* lookup and store using the active key ID
* update docstring
* minor refactor
* Small text fixes (#6912)
* Update physical/raft/raft.go
Co-Authored-By: Calvin Leung Huang <cleung2010@gmail.com>
* review feedback
* Move raft logical system into separate file
* Update help text a bit
* Enforce cluster addr is set and use it for raft bootstrapping
* Fix tests
* fix http test panic
* Pull in latest raft-snapshot library
* Add comment
* Fix a deadlock if a panic happens during request handling
During request handling, if a panic is created, deferred functions are
run but otherwise execution stops. #5889 changed some locks to
non-defers but had the side effect of causing the read lock to not be
released if the request panicked. This fixes that and addresses a few
other potential places where things could go wrong:
1) In sealInitCommon we always now defer a function that unlocks the
read lock if it hasn't been unlocked already
2) In StepDown we defer the RUnlock but we also had two error cases that
were calling it manually. These are unlikely to be hit but if they were
I believe would cause a panic.
* Add panic recovery test
Move audit.LogInput to sdk/logical. Allow the Data values in audited
logical.Request and Response to implement OptMarshaler, in which case
we delegate hashing/serializing responsibility to them. Add new
ClientCertificateSerialNumber audit request field.
SystemView can now be cast to ExtendedSystemView to expose the Auditor
interface, which allows submitting requests and responses to the audit
broker.
Increment a counter whenever a request is received.
The in-memory counter is persisted to counters/requests/YYYY/MM.
When the month wraps around, we reset the in-memory counter to
zero.
Add an endpoint for querying the request counters across all time.
* Add ability to migrate autoseal to autoseal
This adds the ability to migrate from shamir to autoseal, autoseal to
shamir, or autoseal to autoseal, by allowing multiple seal stanzas. A
disabled stanza will be used as the config being migrated from; this can
also be used to provide an unwrap seal on ent over multiple unseals.
A new test is added to ensure that autoseal to autoseal works as
expected.
* Fix test
* Provide default shamir info if not given in config
* Linting feedback
* Remove context var that isn't used
* Don't run auto unseal watcher when in migration, and move SetCores to SetSealsForMigration func
* Slight logic cleanup
* Fix test build and fix bug
* Updates
* remove GetRecoveryKey function
* Port over OSS cluster port refactor components
* Start forwarding
* Cleanup a bit
* Fix copy error
* Return error from perf standby creation
* Add some more comments
* Fix copy/paste error
* initial commit for prometheus and sys/metrics support
* Throw an error if prometheusRetentionTime is 0,add prometheus in devmode
* return when format=prometheus is used and prom is disable
* parse prometheus_retention_time from string instead of int
* Initialize config.Telemetry if nil
* address PR issues
* add sys/metrics framework.Path in a factory
* Apply requiredMountTable entries's MountConfig to existing core table
* address pr comments
* enable prometheus sink by default
* Move Metric-related code in a separate metricsutil helper
* Merge entities during unseal only on the primary
* Add another guard check
* Add perf standby to the check
* Make primary to not differ from case-insensitivity status w.r.t secondaries
* Ensure mutual exclusivity between loading and invalidations
* Both primary and secondaries won't persist during startup and invalidations
* Allow primary to persist when loading case sensitively
* Using core.perfStandby
* Add a tweak in core for testing
* Address review feedback
* update memdb but not storage in secondaries
* Wire all the things directly do mergeEntity
* Fix persist behavior
* Address review feedback
* Two things:
* Change how we populate and clear leader UUID. This fixes a case where
if a standby disconnects from an active node and reconnects, without the
active node restarting, the UUID doesn't change so triggers on a new
active node don't get run.
* Add a bunch of test helpers and minor updates to things.
* Add helper for checking if an error is a fatal error
The double-double negative was really confusing, and this pattern is used a few places in Vault. This negates the double negative, making the devx a bit easier to follow.
* Check return value of UnsealWithStoredKeys in sys/init
* Return proper error types when attempting unseal with stored key
Prior to this commit, "nil" could have meant unsupported auto-unseal, a transient error, or success. This updates the function to return the correct error type, signaling to the caller whether they should retry or fail.
* Continuously attempt to unseal if sealed keys are supported
This fixes a bug that occurs on bootstrapping an initial cluster. Given a collection of Vault nodes and an initialized storage backend, they will all go into standby waiting for initialization. After one node is initialized, the other nodes had no mechanism by which they "re-check" to see if unseal keys are present. This adds a goroutine to the server command which continually waits for unseal keys to exist. It exits in the following conditions:
- the node is unsealed
- the node does not support stored keys
- a fatal error occurs (as defined by Vault)
- the server is shutting down
In all other situations, the routine wakes up at the specified interval and attempts to unseal with the stored keys.
The result will still pass gofmtcheck and won't trigger additional
changes if someone isn't using goimports, but it will avoid the
piecemeal imports changes we've been seeing.
Jeff Mitchell