* use observer pattern for service discovery
* update perf standby method
* fix test
* revert usersTags to being called serviceTags
* use previous consul code
* vault isnt a performance standby before starting
* log err
* changes from feedback
* add Run method to interface
* changes from feedback
* fix core test
* update example
Shamir seals now come in two varieties: legacy and new-style. Legacy
Shamir is automatically converted to new-style when a rekey operation
is performed. All new Vault initializations using Shamir are new-style.
New-style Shamir writes an encrypted master key to storage, just like
AutoUnseal. The stored master key is encrypted using the shared key that
is split via Shamir's algorithm. Thus when unsealing, we take the key
fragments given, combine them into a Key-Encryption-Key, and use that
to decrypt the master key on disk. Then the master key is used to read
the keyring that decrypts the barrier.
* Initial work
* rework
* s/dr/recovery
* Add sys/raw support to recovery mode (#7577)
* Factor the raw paths out so they can be run with a SystemBackend.
# Conflicts:
# vault/logical_system.go
* Add handleLogicalRecovery which is like handleLogical but is only
sufficient for use with the sys-raw endpoint in recovery mode. No
authentication is done yet.
* Integrate with recovery-mode. We now handle unauthenticated sys/raw
requests, albeit on path v1/raw instead v1/sys/raw.
* Use sys/raw instead raw during recovery.
* Don't bother persisting the recovery token. Authenticate sys/raw
requests with it.
* RecoveryMode: Support generate-root for autounseals (#7591)
* Recovery: Abstract config creation and log settings
* Recovery mode integration test. (#7600)
* Recovery: Touch up (#7607)
* Recovery: Touch up
* revert the raw backend creation changes
* Added recovery operation token prefix
* Move RawBackend to its own file
* Update API path and hit it using CLI flag on generate-root
* Fix a panic triggered when handling a request that yields a nil response. (#7618)
* Improve integ test to actually make changes while in recovery mode and
verify they're still there after coming back in regular mode.
* Refuse to allow a second recovery token to be generated.
* Resize raft cluster to size 1 and start as leader (#7626)
* RecoveryMode: Setup raft cluster post unseal (#7635)
* Setup raft cluster post unseal in recovery mode
* Remove marking as unsealed as its not needed
* Address review comments
* Accept only one seal config in recovery mode as there is no scope for migration
* Work on raft backend
* Add logstore locally
* Add encryptor and unsealable interfaces
* Add clustering support to raft
* Remove client and handler
* Bootstrap raft on init
* Cleanup raft logic a bit
* More raft work
* Work on TLS config
* More work on bootstrapping
* Fix build
* More work on bootstrapping
* More bootstrapping work
* fix build
* Remove consul dep
* Fix build
* merged oss/master into raft-storage
* Work on bootstrapping
* Get bootstrapping to work
* Clean up FMS and node-id
* Update local node ID logic
* Cleanup node-id change
* Work on snapshotting
* Raft: Add remove peer API (#906)
* Add remove peer API
* Add some comments
* Fix existing snapshotting (#909)
* Raft get peers API (#912)
* Read raft configuration
* address review feedback
* Use the Leadership Transfer API to step-down the active node (#918)
* Raft join and unseal using Shamir keys (#917)
* Raft join using shamir
* Store AEAD instead of master key
* Split the raft join process to answer the challenge after a successful unseal
* get the follower to standby state
* Make unseal work
* minor changes
* Some input checks
* reuse the shamir seal access instead of new default seal access
* refactor joinRaftSendAnswer function
* Synchronously send answer in auto-unseal case
* Address review feedback
* Raft snapshots (#910)
* Fix existing snapshotting
* implement the noop snapshotting
* Add comments and switch log libraries
* add some snapshot tests
* add snapshot test file
* add TODO
* More work on raft snapshotting
* progress on the ConfigStore strategy
* Don't use two buckets
* Update the snapshot store logic to hide the file logic
* Add more backend tests
* Cleanup code a bit
* [WIP] Raft recovery (#938)
* Add recovery functionality
* remove fmt.Printfs
* Fix a few fsm bugs
* Add max size value for raft backend (#942)
* Add max size value for raft backend
* Include physical.ErrValueTooLarge in the message
* Raft snapshot Take/Restore API (#926)
* Inital work on raft snapshot APIs
* Always redirect snapshot install/download requests
* More work on the snapshot APIs
* Cleanup code a bit
* On restore handle special cases
* Use the seal to encrypt the sha sum file
* Add sealer mechanism and fix some bugs
* Call restore while state lock is held
* Send restore cb trigger through raft log
* Make error messages nicer
* Add test helpers
* Add snapshot test
* Add shamir unseal test
* Add more raft snapshot API tests
* Fix locking
* Change working to initalize
* Add underlying raw object to test cluster core
* Move leaderUUID to core
* Add raft TLS rotation logic (#950)
* Add TLS rotation logic
* Cleanup logic a bit
* Add/Remove from follower state on add/remove peer
* add comments
* Update more comments
* Update request_forwarding_service.proto
* Make sure we populate all nodes in the followerstate obj
* Update times
* Apply review feedback
* Add more raft config setting (#947)
* Add performance config setting
* Add more config options and fix tests
* Test Raft Recovery (#944)
* Test raft recovery
* Leave out a node during recovery
* remove unused struct
* Update physical/raft/snapshot_test.go
* Update physical/raft/snapshot_test.go
* fix vendoring
* Switch to new raft interface
* Remove unused files
* Switch a gogo -> proto instance
* Remove unneeded vault dep in go.sum
* Update helper/testhelpers/testhelpers.go
Co-Authored-By: Calvin Leung Huang <cleung2010@gmail.com>
* Update vault/cluster/cluster.go
* track active key within the keyring itself (#6915)
* track active key within the keyring itself
* lookup and store using the active key ID
* update docstring
* minor refactor
* Small text fixes (#6912)
* Update physical/raft/raft.go
Co-Authored-By: Calvin Leung Huang <cleung2010@gmail.com>
* review feedback
* Move raft logical system into separate file
* Update help text a bit
* Enforce cluster addr is set and use it for raft bootstrapping
* Fix tests
* fix http test panic
* Pull in latest raft-snapshot library
* Add comment
* Add helper for checking if an error is a fatal error
The double-double negative was really confusing, and this pattern is used a few places in Vault. This negates the double negative, making the devx a bit easier to follow.
* Check return value of UnsealWithStoredKeys in sys/init
* Return proper error types when attempting unseal with stored key
Prior to this commit, "nil" could have meant unsupported auto-unseal, a transient error, or success. This updates the function to return the correct error type, signaling to the caller whether they should retry or fail.
* Continuously attempt to unseal if sealed keys are supported
This fixes a bug that occurs on bootstrapping an initial cluster. Given a collection of Vault nodes and an initialized storage backend, they will all go into standby waiting for initialization. After one node is initialized, the other nodes had no mechanism by which they "re-check" to see if unseal keys are present. This adds a goroutine to the server command which continually waits for unseal keys to exist. It exits in the following conditions:
- the node is unsealed
- the node does not support stored keys
- a fatal error occurs (as defined by Vault)
- the server is shutting down
In all other situations, the routine wakes up at the specified interval and attempts to unseal with the stored keys.
* core: Cancel context before taking state lock
* Create active context outside of postUnseal
* Attempt to drain requests before canceling context
* fix test
* Tackle #4929 a different way
This turns c.sealed into an atomic, which allows us to call sealInternal
without a lock. By doing so we can better control lock grabbing when a
condition causing the standby loop to get out of active happens. This
encapsulates that logic into two distinct pieces (although they could
be combined into one), and makes lock guarding more understandable.
* Re-add context canceling to the non-HA version of sealInternal
* Return explicitly after stopCh triggered
* logbridge with hclog and identical output
* Initial search & replace
This compiles, but there is a fair amount of TODO
and commented out code, especially around the
plugin logclient/logserver code.
* strip logbridge
* fix majority of tests
* update logxi aliases
* WIP fixing tests
* more test fixes
* Update test to hclog
* Fix format
* Rename hclog -> log
* WIP making hclog and logxi love each other
* update logger_test.go
* clean up merged comments
* Replace RawLogger interface with a Logger
* Add some logger names
* Replace Trace with Debug
* update builtin logical logging patterns
* Fix build errors
* More log updates
* update log approach in command and builtin
* More log updates
* update helper, http, and logical directories
* Update loggers
* Log updates
* Update logging
* Update logging
* Update logging
* Update logging
* update logging in physical
* prefixing and lowercase
* Update logging
* Move phyisical logging name to server command
* Fix som tests
* address jims feedback so far
* incorporate brians feedback so far
* strip comments
* move vault.go to logging package
* update Debug to Trace
* Update go-plugin deps
* Update logging based on review comments
* Updates from review
* Unvendor logxi
* Remove null_logger.go
Becca Petrin