* Handpick cluster cipher suites when they're not user-set
There is an undocumented way for users to choose cluster cipher suites
but for the most part this is to paper over the fact that there are
undesirable suites in TLS 1.2.
If not explicitly set, have the set of cipher suites for the cluster
port come from a hand-picked list; either the allowed TLS 1.3 set (for
forwards compatibility) or the three identical ones for TLS 1.2.
The 1.2 suites have been supported in Go until at least as far back as
Go 1.9 from two years ago. As a result in cases where no specific suites
have been chosen this _ought_ to have no compatibility issues.
Also includes a useful test script.
* Abstract generate-root authentication into the strategy interface
* Generate root strategy ncabatoff (#7700)
* Adapt to new shamir-as-kek reality.
* Don't try to verify the master key when we might still be sealed (in
recovery mode). Instead, verify it in the authenticate methods.
because when unsealing it wouldn't wait for core 0 to come up and become
the active node. Much of our testing code assumes that core0 is the
active node.
Shamir seals now come in two varieties: legacy and new-style. Legacy
Shamir is automatically converted to new-style when a rekey operation
is performed. All new Vault initializations using Shamir are new-style.
New-style Shamir writes an encrypted master key to storage, just like
AutoUnseal. The stored master key is encrypted using the shared key that
is split via Shamir's algorithm. Thus when unsealing, we take the key
fragments given, combine them into a Key-Encryption-Key, and use that
to decrypt the master key on disk. Then the master key is used to read
the keyring that decrypts the barrier.
* core: add postSealMigration method
The postSealMigration method is called at the end of the postUnseal
method if a seal migration has occurred. This starts a seal rewrap
process in the enterprise version of. It is a no-op in the OSS version.
* Initial work
* rework
* s/dr/recovery
* Add sys/raw support to recovery mode (#7577)
* Factor the raw paths out so they can be run with a SystemBackend.
# Conflicts:
# vault/logical_system.go
* Add handleLogicalRecovery which is like handleLogical but is only
sufficient for use with the sys-raw endpoint in recovery mode. No
authentication is done yet.
* Integrate with recovery-mode. We now handle unauthenticated sys/raw
requests, albeit on path v1/raw instead v1/sys/raw.
* Use sys/raw instead raw during recovery.
* Don't bother persisting the recovery token. Authenticate sys/raw
requests with it.
* RecoveryMode: Support generate-root for autounseals (#7591)
* Recovery: Abstract config creation and log settings
* Recovery mode integration test. (#7600)
* Recovery: Touch up (#7607)
* Recovery: Touch up
* revert the raw backend creation changes
* Added recovery operation token prefix
* Move RawBackend to its own file
* Update API path and hit it using CLI flag on generate-root
* Fix a panic triggered when handling a request that yields a nil response. (#7618)
* Improve integ test to actually make changes while in recovery mode and
verify they're still there after coming back in regular mode.
* Refuse to allow a second recovery token to be generated.
* Resize raft cluster to size 1 and start as leader (#7626)
* RecoveryMode: Setup raft cluster post unseal (#7635)
* Setup raft cluster post unseal in recovery mode
* Remove marking as unsealed as its not needed
* Address review comments
* Accept only one seal config in recovery mode as there is no scope for migration
* add storage route
* template out the routes and new raft storage overview
* fetch raft config and add new server model
* pngcrush the favicon
* add view components and binary-file component
* add form-save-buttons component
* adjust rawRequest so that it can send a request body and returns the response on errors
* hook up restore
* rename binary-file to file-to-array-buffer
* add ember-service-worker
* use forked version of ember-service-worker for now
* scope the service worker to a single endpoint
* show both download buttons for now
* add service worker download with a fallback to JS in-mem download
* add remove peer functionality
* lint go file
* add storage-type to the cluster and node models
* update edit for to take a cancel action
* separate out a css table styles to be used by http-requests-table and on the raft-overview component
* add raft-join adapter, model, component and use on the init page
* fix styling and gate the menu item on the cluster using raft storage
* style tweaks to the raft-join component
* fix linting
* add form-save-buttons component to storybook
* add cancel functionality for backup uploads, and add a success message for successful uploads
* add component tests
* add filesize.js
* add filesize and modified date to file-to-array-buffer
* fix linting
* fix server section showing in the cluster nav
* don't use babel transforms in service worker lib because we don't want 2 copies of babel polyfill
* add file-to-array-buffer to storybook
* add comments and use removeObjectURL to raft-storage-overview
* update alert-banner markdown
* messaging change for upload alert banner
* Update ui/app/templates/components/raft-storage-restore.hbs
Co-Authored-By: Joshua Ogle <joshua@joshuaogle.com>
* more comments
* actually render the label if passed and update stories with knobs
Seal keys can be rotated. When this happens, the barrier and recovery
keys should be re-encrypted with the new seal key. This change
automatically re-encrypts the barrier and recovery keys with the latest
seal key on the active node during the 'postUnseal' phase.
* sys: add host-info endpoint, add client API method
* remove old commented handler
* add http tests, fix bugs
* query all partitions for disk usage
* fix Timestamp decoding
* add comments for clarification
* dont append a nil entry on disk usage query error
* remove HostInfo from the sdk api
We can use Logical().Read(...) to query this endpoint since the payload is contained with the data object. All warnings are preserved under Secret.Warnings.
* ensure that we're testing failure case against a standby node
* add and use TestWaitStandby to ensure core is on standby
* remove TestWaitStandby
* respond with local-only error
* move HostInfo into its own helper package
* fix imports; use new no-forward handler
* add cpu times to collection
* emit clearer multierrors/warnings by collection type
* add comments on HostInfo fields
The OIDC Discovery standard requires the response_types_supported field
to be returned in the .well-known/openid-configuration response.
Also, the AWS IAM OIDC consumer won't accept Vault as an identity
provider without this field.
Based on examples in the OIDC Core documentation, it appears Vault
supports only the `id_token` flow, and thus that is the only value that
makes sense to be set in this field. See:
https://openid.net/specs/openid-connect-core-1_0.html#AuthorizationExamples
* sys/pprof: add pprof routes to the system backend
* sys/pprof: add pprof paths to handler with local-only check
* fix trailing slash on pprof index endpoint
* use new no-forward handler on pprof
* go mod tidy
* add pprof external tests
* disallow streaming requests to exceed DefaultMaxRequestDuration
* add max request duration test
This allows logical operations (along with a non-nil response writer) to
process http handler funcs within the operation function while keeping
auth and audit checks that the logical request flow provides.
* Move SudoPrivilege out of SystemView
We only use this in token store and it literally doesn't work anything
that isn't the token store or system mount, so we should stop exposing
something that doesn't work.
* Reconcile extended system view with sdk/logical a bit and put an explanation for why SudoPrivilege isn't moved over
Generalization of the PhysicalFactory notion introduced by Raft, so it can be used by other storage backends in tests. These are the OSS changes needed for my rework of the ent integ tests and cluster helpers.
* Fix create token sudo non-root namespace check
* Moved path trimming to SudoPrivilege
* Changed to tokenCtx instead of request ctx
* Use root context for AllowOperation; details in comment
* also flush nilNamespace when a namespace is flushed
* adds test cases with nilNamespace.ID
* adds a test case
* adds a test for oidcCache.Flush
* fixed a typo in an error message
There are a few different things happening in this change. First, some code that previously lived in enterprise has moved here: this includes some helper code for manipulating clusters and for building storage backends. Second, the existing cluster-building code using inmem storage has been generalized to allow various storage backends. Third, added support for creating two-cluster DR setups. Finally, there are tweaks to handle edge cases that
result in intermittent failures, or to eliminate sleeps in favour of polling to detect state changes.
Also: generalize TestClusterOptions.PhysicalFactory so it can be used either
as a per-core factory (for raft) or a per-cluster factory (for other
storage backends.)
* Add maximum amount of random characters requested at any given time
* Readability changes
* Removing sys/tools/random from the default policy
* Setting the maxBytes value as const
* Declaring maxBytes in the package to use it everywhere
* Using maxBytes in the error message
This eliminates a bunch of noise at the end of a test's logs, making it
easier to diagnose test failures.
Add TestCluster.Logger. This is intendend to be used when test helpers
want to log something. If TestClusterOptions.Logger is non-nil, it will
be used as the cluster logger, otherwise we create one based on test
name. In the absence of CoreConfig.Logger, this logger is also used as
the parent of each core's log. This makes it easy when running parallel
tests to identify which log message came from which test.
* flush identity/oidc cache by namespace
* separates and unit tests the logic that looks for a namespace id within a namespace key
* applies pr feedback
* renames nskeyContainsID to isNamespacedKey
We already have a separate log line if rollback fails. It really fills
up logs to always note when rollback is occurring and it usually isn't
useful for incidents.
Wrapping validation was deferring the function to audit log before
actually checking if we were sealed or standby, and without having the
read lock grabbed.
* upgrade aws roles
* test upgrade aws roles
* Initialize aws credential backend at mount time
* add a TODO
* create end-to-end test for builtin/credential/aws
* fix bug in initializer
* improve comments
* add Initialize() to logical.Backend
* use Initialize() in Core.enableCredentialInternal()
* use InitializeRequest to call Initialize()
* improve unit testing for framework.Backend
* call logical.Backend.Initialize() from all of the places that it needs to be called.
* implement backend.proto changes for logical.Backend.Initialize()
* persist current role storage version when upgrading aws roles
* format comments correctly
* improve comments
* use postUnseal funcs to initialize backends
* simplify test suite
* improve test suite
* simplify logic in aws role upgrade
* simplify aws credential initialization logic
* simplify logic in aws role upgrade
* use the core's activeContext for initialization
* refactor builtin/plugin/Backend
* use a goroutine to upgrade the aws roles
* misc improvements and cleanup
* do not run AWS role upgrade on DR Secondary
* always call logical.Backend.Initialize() when loading a plugin.
* improve comments
* on standbys and DR secondaries we do not want to run any kind of upgrade logic
* fix awsVersion struct
* clarify aws version upgrade
* make the upgrade logic for aws auth more explicit
* aws upgrade is now called from a switch
* fix fallthrough bug
* simplify logic
* simplify logic
* rename things
* introduce currentAwsVersion const to track aws version
* improve comments
* rearrange things once more
* conglomerate things into one function
* stub out aws auth initialize e2e test
* improve aws auth initialize e2e test
* finish aws auth initialize e2e test
* tinker with aws auth initialize e2e test
* tinker with aws auth initialize e2e test
* tinker with aws auth initialize e2e test
* fix typo in test suite
* simplify logic a tad
* rearrange assignment
* Fix a few lifecycle related issues in #7025 (#7075)
* Fix panic when plugin fails to load
* Fix various read only storage errors
A mistake we've seen multiple times in our own plugins and that we've
seen in the GCP plugin now is that control flow (how the code is
structured, helper functions, etc.) can obfuscate whether an error came
from storage or some other Vault-core location (in which case likely it
needs to be a 5XX message) or because of user input (thus 4XX). Error
handling for functions therefore often ends up always treating errors as
either user related or internal.
When the error is logical.ErrReadOnly this means that treating errors as
user errors skips the check that triggers forwarding, instead returning
a read only view error to the user.
While it's obviously more correct to fix that code, it's not always
immediately apparent to reviewers or fixers what the issue is and fixing
it when it's found both requires someone to hit the problem and report
it (thus exposing bugs to users) and selective targeted refactoring that
only helps that one specific case.
If instead we check whether the logical.Response is an error and, if so,
whether it contains the error value, we work around this in all of these
cases automatically. It feels hacky since it's a coding mistake, but
it's one we've made too multiple times, and avoiding bugs altogether is
better for our users.
* storage/raft: When restoring a snapshot preseal first
* best-effort allow standbys to apply the restoreOp before sealing active node
* Don't cache the raft tls key
* Update physical/raft/raft.go
* Move pending raft peers to core
* Fix race on close bool
* Extend the leaderlease time for tests
* Update raft deps
* Fix audit hashing
* Fix race with auditing
* adds allowed_roles field to identity token keys and updates tests
* removed a comment that was redundant
* allowed_roles uses role client_id s instead of role names
* renamed allowed_roles to allowed_clients
* renamed allowed_clients to allowed_clientIDs
* WIP
* Kinda working?
* Handle nil during rotation
* Update discovery document
* WIP
* removes some warning messages and checks on keys when creating a role
* Path issuer ns/specific
* Fix nspath handling
* Update issuer handling
* Add locking around key updates
* Cleanup
* Fix nextRun handling
* saving work
* Include namespace in token
* saving work
* saving work
* happy path
* saving work
* sharing debug msgs
* Merge branch 'master' into refactor_periodic_func_test
# Conflicts:
# vault/identity_store_oidc.go
# vault/identity_store_oidc_test.go
* use MatchingStorageByAPIPath instead of logical.InmemStorage
At the level of role config it doesn't mean anything to use
default-service or default-batch; that's for mount tuning. So disallow
it in tokenutil. This also fixes the fact that the switch statement
wasn't right.
Add support for hashing time.Time within slices, which unbreaks auditing of requests returning the request counters.
Break Hash into struct-specific func like HashAuth, HashRequest. Move all the copying/hashing logic from FormatRequest/FormatResponse into the new Hash* funcs. HashStructure now modifies in place instead of copying.
Instead of returning an error when trying to hash map keys of type time.Time, ignore them, i.e. pass them through unhashed.
Enable auditing on test clusters by default if the caller didn't specify any audit backends. If they do, they're responsible for setting it up.
* adds allowed_roles field to identity token keys and updates tests
* removed a comment that was redundant
* allowed_roles uses role client_id s instead of role names
* renamed allowed_roles to allowed_clients
* renamed allowed_clients to allowed_clientIDs
* removes some warning messages and checks on keys when creating a role
* removes name field being set unneededly
Earlier in tokenutil's dev it seemed like there was no reason to allow
auth plugins to toggle renewability off. However, it turns out Centrify
makes use of this for sensible reasons. As a result, move the forcing-on
of renewability into tokenutil, but then allow overriding after
PopulateTokenAuth is called.
* Implemented token backend support for identity
* Fixed tests
* Refactored a few checks for the token entity overwrite. Fixed tests.
* Moved entity alias check up so that the entity and entity alias is only created when it has been specified in allowed_entity_aliases list
* go mod vendor
* Added glob pattern
* Optimized allowed entity alias check
* Added test for asterisk only
* Changed to glob pattern anywhere
* Changed response code in case of failure. Changed globbing pattern check. Added docs.
* Added missing token role get parameter. Added more samples
* Fixed failing tests
* Corrected some cosmetical review points
* Changed response code for invalid provided entity alias
* Fixed minor things
* Fixed failing test
If only a non-_token field is provided we don't want to clear out the
Token version of the params, we want to set both. Otherwise we can't
rely on using the Token version of the parameter when creating the Auth
struct.
