* Allow correct importing of certs without CRL KU
When Vault imports certificates without KU for CRLSign, we shouldn't
provision CRLUsage on the backing issuer; otherwise, we'll attempt to
build CRLs and Go will cause us to err out. This change makes it clear
(at issuer configuration time) that we can't possibly support this
operation and hopefully prevent users from running into the more cryptic
Go error.
Note that this does not apply for OCSP EKU: the EKU exists, per RFC 6960
Section 2.6 OCSP Signature Authority Delegation, to allow delegation of
OCSP signing to a child certificate. This EKU is not necessary on the
issuer itself, and generally assumes issuers are allowed to issue OCSP
responses regardless of KU/EKU.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs to clarify issue with import, CRL usage
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update website/content/api-docs/secret/pki.mdx
* Add additional test assertion
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Handle multiple matching issuers in OCSP requests
- Select the first issuer that matches our request hashes and has
the OCSP signing usage enabled. This might not match the exact
issuer id that issued the certificate but the signatures will be
okay.
* PR feedback
Previously we used the global backend-set crlLifetime as a default
value. However, this was refactored into a new defaultCrlConfig instead,
which we should reply with when the CRL configuration has not been set
yet. In particular, the 72h default expiry (and new 12h auto-rebuild
grace period) was added and made explicit.
This fixes the broken UI test.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow automatic rebuilding of CRLs
When enabled, periodic rebuilding of CRLs will improve PKI mounts in two
way:
1. Reduced load during periods of high (new) revocations, as the CRL
isn't rebuilt after each revocation but instead on a fixed schedule.
2. Ensuring the CRL is never stale as long as the cluster remains up,
by checking for next CRL expiry and regenerating CRLs before that
happens. This may increase cluster load when operators have large
CRLs that they'd prefer to let go stale, rather than regenerating
fresh copies.
In particular, we set a grace period before expiration of CRLs where,
when the periodic function triggers (about once a minute), we check
upcoming CRL expirations and check if we need to rebuild the CRLs.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on periodic rebuilding
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow modification of rollback period for testing
When testing backends that use the periodic func, and specifically,
testing the behavior of that periodic func, waiting for the usual 1m
interval can lead to excessively long test execution. By switching to a
shorter period--strictly for testing--we can make these tests execute
faster.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for auto-rebuilding of CRLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove non-updating getConfig variant
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Avoid double reload of config
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor existing CRL function to storage getRevocationConfig
* Introduce ocsp_disable config option in config/crl
* Introduce OCSPSigning usage flag on issuer
* Add ocsp-request passthrough within lower layers of Vault
* Add OCSP responder to Vault PKI
* Add API documentation for OCSP
* Add cl
* Revert PKI storage migration modifications for OCSP
* Smaller PR feedback items
- pki.mdx doc update
- parens around logical.go comment to indicate DER encoded request is
related to OCSP and not the snapshots
- Use AllIssuers instead of writing them all out
- Drop zero initialization of crl config's Disable flag if not present
- Upgrade issuer on the fly instead of an initial migration
* Additional clean up backing out the writeRevocationConfig refactoring
* Remove Dirty issuer flag and update comment about not writing upgrade to
storage
* Address PR feedback and return Unknown response when mismatching issuer
* make fmt
* PR Feedback.
* More PR feedback
- Leverage ocsp response constant
- Remove duplicate errors regarding unknown issuers
* Migrate existing PKI mounts that only contains a key
- We missed testing a use-case of the migration that someone has a PKI
mount point that generated a CSR but never called set-signed back on
that mount point so it only contains a key.
* Add cl
* Add per-issuer AIA URI information
Per discussion on GitHub with @maxb, this allows issuers to have their
own copy of AIA URIs. Because each issuer has its own URLs (for CA and
CRL access), its necessary to mint their issued certs pointing to the
correct issuer and not to the global default issuer. For anyone using
multiple issuers within a mount, this change allows the issuer to point
back to itself via leaf's AIA info.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on per-issuer AIA info
Also add it to the considerations page as something to watch out for.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for per-issuer AIA information
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor AIA setting on the issuer
This introduces a common helper per Steve's suggestion.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify error messages w.r.t. AIA naming
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify error messages regarding AIA URLs
This clarifies which request parameter the invalid URL is contained
in, disambiguating the sometimes ambiguous usage of AIA, per suggestion
by Max.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rename getURLs -> getGlobalAIAURLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correct AIA acronym expansion word orders
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix bad comment suggesting re-generating roots
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add two entries to URL tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow marking issuers as revoked
This allows PKI's issuers to be considered revoked and appear on each
others' CRLs. We disable issuance (via removing the usage) and prohibit
modifying the usage via the regular issuer management interface.
A separate endpoint is necessary because issuers (especially if signed
by a third-party CA using incremental serial numbers) might share a
serial number (e.g., an intermediate under cross-signing might share the
same number as an external root or an unrelated intermediate).
When the next CRL rebuild happens, this issuer will then appear on
others issuers CRLs, if they validate this issuer's certificate.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on revoking issuers
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for issuer revocation semantics
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Notate that CRLs will be rebuilt
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix timestamp field from _utc -> to _rfc3339
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure serial-based accesses shows as revoked
Thanks Kit!
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add warning when revoking default issuer
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* impr(ssh): fix bug with allowed_users_template and add allowed_domains_template field in SSH role configuration, closes#10943
* chore: add changelog entry
* Allow Proof of Possession based revocation
Revocation by proof of possession ensures that we have a private key
matching the (provided or stored) certificate. This allows callers to
revoke certificate they own (as proven by holding the corresponding
private key), without having an admin create innumerable ACLs around
the serial_number parameter for every issuance/user.
We base this on Go TLS stack's verification of certificate<->key
matching, but extend it where applicable to ensure curves match, the
private key is indeed valid, and has the same structure as the
corresponding public key from the certificate.
This endpoint currently is authenticated, allowing operators to disable
the endpoint if it isn't desirable to use, via ACL policies.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify error message on ParseDERKey
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Leave revoke-with-key authenticated
After some discussion, given the potential for DoS (via submitting a lot
of keys/certs to validate, including invalid pairs), it seems best to
leave this as an authenticated endpoint. Presently in Vault, there's no
way to have an authenticated-but-unauthorized path (i.e., one which
bypasses ACL controls), so it is recommended (but not enforced) to make
this endpoint generally available by permissive ACL policies.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add API documentation on PoP
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add acceptance tests for Proof of Possession
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Exercise negative cases in PoP tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ignore EC PARAMETER blocks during issuer import
While older versions of Vault supported sending this, we broke such
support in 1.11. Ignore them from the manage issuers endpoint (which is
aliased to the old /config/ca path) -- but keep erring in the import
keys paths. The latter is a new endpoint not aliased to anything and
only expects a single PEM block.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add regression test for EC PARAMs during import
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor serial creation to common helper
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add BYOC revocation to PKI mount
This allows operators to revoke certificates via a PEM blob passed to
Vault. In particular, Vault verifies the signature on the certificate
from an existing issuer within the mount, ensuring that one indeed
issued this certificate. The certificate is then added to storage and
its serial submitted for revocation.
This allows certificates generated with no_store=true to be submitted
for revocation afterwards, given a full copy of the certificate. As a
consequence, all roles can now safely move to no_store=true (if desired
for performance) and revocation can be done on a case-by-case basis.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs on BYOC revocation
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add PEM length check to BYOC import
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for BYOC
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Guard against legacy CA bundle usage
This prevents usage of the BYOC cert on a hybrid 1.10/1.12 cluster with
an non-upgraded CA issuer bundle.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
This option is known to cause problems with large numbers of issued
certificates. Ensure admins are warned about the impact of this field
and encourage them to disable it.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
strings.ReplaceAll(s, old, new) is a wrapper function for
strings.Replace(s, old, new, -1). But strings.ReplaceAll is more
readable and removes the hardcoded -1.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* Add PSS signature support to Vault PKI engine
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use issuer's RevocationSigAlg for CRL signing
We introduce a new parameter on issuers, revocation_signature_algorithm
to control the signature algorithm used during CRL signing. This is
because the SignatureAlgorithm value from the certificate itself is
incorrect for this purpose: a RSA root could sign an ECDSA intermediate
with say, SHA256WithRSA, but when the intermediate goes to sign a CRL,
it must use ECDSAWithSHA256 or equivalent instead of SHA256WithRSA. When
coupled with support for PSS-only keys, allowing the user to set the
signature algorithm value as desired seems like the best approach.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add use_pss, revocation_signature_algorithm docs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add PSS to signature role issuance test matrix
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow roots to self-identify revocation alg
When using PSS support with a managed key, sometimes the underlying
device will not support PKCS#1v1.5 signatures. This results in CRL
building failing, unless we update the entry's signature algorithm
prior to building the CRL for the new root.
With a RSA-type key and use_pss=true, we use the signature bits value to
decide which hash function to use for PSS support.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add clearer error message on failed import
When CRL building fails during cert/key import, due to PSS failures,
give a better indication to the user that import succeeded its just CRL
building that failed. This tells them the parameter to adjust on the
issuer and warns that CRL building will fail until this is fixed.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add case insensitive SigAlgo matching
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Convert UsePSS back to regular bool
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor PSS->certTemplate into helper function
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Proper string output on rev_sig_alg display
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Copy root's SignatureAlgorithm for CRL building
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow old certs to be cross-signed
In Vault 1.11, we introduced cross-signing support, but the earlier SKID
field change in Vault 1.10 causes problems: notably, certs created on
older versions of Vault (<=1.9) or outside of Vault (with a different
SKID method) cannot be cross-signed and validated in OpenSSL.
In particular, OpenSSL appears to be unique in requiring a SKID/AKID
match for chain building. If AKID and SKID are present on an otherwise
valid client/parent cert pair and the values are different, OpenSSL will
not build a valid path over those two, whereas most other chain
validation implementations will.
Regardless, to have proper cross-signing support, we really aught to
support copying an SKID. This adds such support to the sign-intermediate
endpoint. Support for the /issue endpoint is not added, as cross-signing
leaf certs isn't generally useful and can accept random SKIDs.
Resolves: #16461
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address review feedback, fix tests
Also adds a known-answer test using LE R3 CA's SKID.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address review feedback regarding separators
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
This decreases the total time to run the test suite significantly. From
the last PR, we were at 151s:
> [cipherboy@xps15 pki]$ go test -count=1 github.com/hashicorp/vault/builtin/logical/pki
> ok github.com/hashicorp/vault/builtin/logical/pki 151.182s
Now we're around 60s:
> [cipherboy@xps15 pki]$ go test -count=1 github.com/hashicorp/vault/builtin/logical/pki
> ok github.com/hashicorp/vault/builtin/logical/pki 61.838s
Notably, Go will correctly handle parallelizing tests across both
packages and within a package, so this shouldn't really impact test
runners (if they're already saturated).
The only gotcha in this approach is that the call to t.Run(...) becomes
effectively async; this means we either need to not mark the test as
parallel or shadow any loop variables inside the scope of the loop to
allow the t.Run to have the correct copy.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
This tells the user that the next step should be to configure AIA URLs
on this newly imported issuer/mount point. Ideally this should occur
before any leaves are issued such that they have the correct
information.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* pki: When a role sets key_type to any ignore key_bits value when signing
- Bypass the validation for the role's key_bits value when signing CSRs
if the key_type is set to any. We still validate the key is at least
2048 for RSA backed CSRs as we did in 1.9.x and lower.
structs and mapstructure aren't really used within Vault much any more,
so we should start removing them. Luckily there was only one externally
accessible place where structs was used (AIA URLs config) so that was
easy to remove. The rest is mostly structure tag changes.
path_roles_tests.go relied on mapstructure in some places that broke,
but otherwise backend_test.go hasn't yet been modified to remove the
dependency on mapstructure. These didn't break as the underlying
CertBundle didn't get mapstructure support removed (as its in the SDK).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
This will allow us to refactor the storage functions to take additional
parameters (or backend-inferred values) in the future. In particular, as
we look towards adding a storage cache layer, we'll need to add this to
the backend, which is now accessible from all storage functions.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
When tidy is called without arguments, we kick off a tidy operation with
no targets. This results in nothing being done, though the user might
reasonably expect some results.
Throw a warning in this case, so the user knows not to expect anything.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Add database plugin metrics around connections
This is a replacement for #15923 that takes into account recent lock
cleanup.
I went ahead and added back in the hanging plugin test, which I meant to
add in #15944 but forgot.
I tested this by spinning up a statsd sink in the tests and verifying I
got a stream of metrics:
```
$ nc -u -l 8125 | grep backend
test.swenson-Q9Q0L72D39.secrets.database.backend.connections.count.pgx.5.:1.000000|g
test.swenson-Q9Q0L72D39.secrets.database.backend.connections.count.pgx.5.:0.000000|g
test.swenson-Q9Q0L72D39.secrets.database.backend.connections.count.pgx.5.:1.000000|g
test.swenson-Q9Q0L72D39.secrets.database.backend.connections.count.pgx.5.:0.000000|g
```
We have to rework the shared gauge code to work without a full
`ClusterMetricSink`, since we don't have access to the core metrics from
within a plugin.
This only reports metrics every 10 minutes by default, but it solves
some problems we would have had with the gauge values becoming stale and
needing to be re-sent.
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
* Return errors on short PEM bundles (keys, issuers)
When users pass the path of the bundle to the API, rather than the
contents of the bundle (say, by omitting the `@` symbol on a Vault CLI
request), give a better error message indicating to the user what the
potential problem might be. While a larger bound for certificates was
given (75 bytes, likely 100 would be fine as well), a smaller bound had
to be chosen for keys as there's less standard DER encoding data around
them.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add signature_bits to sign-intermediate
This endpoint was lacking the signature_bits field like all the other
endpoints. Notably, in #15478, the ability to customize the intermediate
CSR's signature bits was removed without checking for the ability to
customize the final (root-signed) intermediate certificate's value.
This adds in that missing ability, bringing us parity with root
generation and role-based signing.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add signature_bits to sign-verbatim
This endpoint was also lacking the signature_bits field, preventing
other signature hash functions from being utilized here.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test for revocation under intermediate CA
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow revocation of certs with key-less issuers
In Vault 1.11's multiple issuer functionality, we incorrectly fetched
the full CA signing bundle for validating revocation of leaf certs (when
attempting to prohibit revocation of issuers in the mount). When the
issuer lacked a key (such as the root issuer on an intermediate mount),
this signing bundle creation failed.
Instead of fetching the full CA signing bundle, fetch instead the raw
certutil.CertBundle and parse it (to x509.Certificate form) ourselves.
This manifests as the error on revocation:
> URL: PUT http://127.0.0.1:8200/v1/pki_int/revoke
> * could not fetch the CA certificate for issuer id 156e1b99-4f04-5b5e-0036-cc0422c0c0d3: unable to fetch corresponding key for issuer 156e1b99-4f04-5b5e-0036-cc0422c0c0d3; unable to use this issuer for signing
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Cleanup and simplify lock usage in database plugin
Following up from discussions in #15923 and #15933, I wanted to split
out a separate PR that drastically reduced the complexity of the use of
the databaseBackend lock. We no longer need it at all for the
`credRotationQueue`, and we can move it to be solely used in a few,
small connections map management functions.
Co-authored-by: Calvin Leung Huang <1883212+calvn@users.noreply.github.com>
* ssh: Fix template regex test for defaultExtensions
- The regex to identify if our defaultExtensions contains a template was
a little too greedy, requiring the entire field to be just the regex. Allow
additional text within the value field to be added
* Add cl
* Add cn_validations PKI Role parameter
This new parameter allows disabling all validations on a common name,
enabled by default on sign-verbatim and issuer generation options.
Presently, the default behavior is to allow either an email address
(denoted with an @ in the name) or a hostname to pass validation.
Operators can restrict roles to just a single option (e.g., for email
certs, limit CNs to have strictly email addresses and not hostnames).
By setting the value to `disabled`, CNs of other formats can be accepted
without validating their contents against our minimal correctness checks
for email/hostname/wildcard that we typically apply even when broad
permissions (allow_any_name=true, enforce_hostnames=false, and
allow_wildcard_certificates=true) are granted on the role.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update PKI tests for cn_validation support
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add PKI API documentation on cn_validations
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor role issuance tests to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 5.879s
After:
github.com/hashicorp/vault/builtin/logical/pki 1.063s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor role key bit tests to use direct backend
Also removes redundant cases.
Before:
github.com/hashicorp/vault/builtin/logical/pki 136.605s
After:
github.com/hashicorp/vault/builtin/logical/pki 24.713s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor common name test to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.767s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.611s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor device cert tests to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.725s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.402s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor invalid parameter test to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 3.777s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.021s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor Alt Issuer tests to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.560s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.111s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor root idempotency tests to use direct backend
As a result, we've had to import a root cert from elsewhere in the test
suite, rather than using the one off the cluster.
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.399s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.523s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Move PKI direct backend helpers to common location
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor OID SANs test to direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 5.284s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.808s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor allowed serial numbers test to direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.789s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.600s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor URI SANs to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.245s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.600s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor Full Chain CA tests to direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 14.503s
After:
github.com/hashicorp/vault/builtin/logical/pki 2.082s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update Allow Past CA tests to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.323s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.322s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Convert existing-key root test to direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.430s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.370s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor CRL enable/disable tests to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 5.738s
After:
github.com/hashicorp/vault/builtin/logical/pki 2.482s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update intermediate existing key tests to use direct backend
Before:
github.com/hashicorp/vault/builtin/logical/pki 4.182s
After:
github.com/hashicorp/vault/builtin/logical/pki 0.416s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor Issuance TTL verification tests to use direct backend
Also shorten sleep duration slightly by precisely calculating it
relative to the actual cert life time.
Before:
github.com/hashicorp/vault/builtin/logical/pki 19.755s
After:
github.com/hashicorp/vault/builtin/logical/pki 11.521s
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow reading Nomad CA/Client cert configuration
In the Nomad secret engine, writing to /nomad/config/access allows users
to specify a CA certificate and client credential pair. However, these
values are not in the read of the endpoint, making it hard for operators
to see if these values were specified and if they need to be rotated.
Add `ca_cert` and `client_cert` parameters to the response, eliding the
`client_key` parameter as it is more sensitive (and should most likely
be replaced at the same time as `client_cert`).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix tests to expect additional fields
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test with existing CA/client cert+key
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Handle func
* Update - check if key_type and key_bits are allowed
* Update - fields
* Generating keys based on provided key_type and key_bits
* Returning signed key
* Refactor
* Refactor update to common logic function
* Descriptions
* Tests added
* Suggested changes and tests added and refactored
* Suggested changes and fmt run
* File refactoring
* Changelog file
* Update changelog/15561.txt
Co-authored-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Suggested changes - consistent returns and additional info to test messages
* ssh issue key pair documentation
Co-authored-by: Alexander Scheel <alexander.m.scheel@gmail.com>
- Selecting a constant default value exposed a possible edge case
that the migration would fail if a previous migration contained the
same issuer or key name.
* Add parsing for NSS-wrapped Ed25519 keys
NSS wraps Ed25519 using the PKCS#8 standard structure. The Go standard
library as of Go 1.18.x doesn't support parsing this key type with the
OID used by NSS; it requires the 1.3.101.112/RFC 8410 format, rather
than the RFC 5915-esque structure supported here.
Co-authored-by: Rachel Culpepper <84159930+rculpepper@users.noreply.github.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add integration test with NSS-created wrapped key
Co-authored-by: Rachel Culpepper <84159930+rculpepper@users.noreply.github.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Co-authored-by: Rachel Culpepper <84159930+rculpepper@users.noreply.github.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Rachel Culpepper <84159930+rculpepper@users.noreply.github.com>
* Support for CPS URLs in Custom Policy Identifiers.
* go fmt
* Add Changelog
* Fix panic in test-cases.
* Update builtin/logical/pki/path_roles.go
Fix intial nil identifiers.
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Make valid policy OID so don't break ASN parse in test.
* Add test cases.
* go fmt.
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
- Do not set the first issuer we attempt to import as the default issuer unless
it has a corresponding key.
- Add the ability to set a default issuer if none exist and we import it's corresponding key after the fact.
- Add a warning to an end-user if we imported multiple issuers with keys and we
choose one of them as the default value.
* Add integration tests for aliased PKI paths (root/rotate, root/replace)
- Add tests for the two api endpoints
- Also return the issuer_name field within the generate root api response
* Add key_name to generate root api endpoint response and doc updates
- Since we are now returning issuer_name, we should also return key_name
- Update the api-docs for the generate root endpoint responses and add
missing arguments that we accept.
* WIP replacing lib/pq
* change timezome param to be URI format
* add changelog
* add changelog for redshift
* update changelog
* add test for DSN style connection string
* more parseurl and quoteidentify to sdk; include copyright and license
* call dbutil.ParseURL instead, fix import ordering
Co-authored-by: Calvin Leung Huang <1883212+calvn@users.noreply.github.com>
