* Document 'managed_key' key type for transit. Document new 'usages' parameter when creating a managed key in the system backend.
* Document new managed key parameters for transit managed key rotation.
* Add documentation on fetching unified CRLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on unified OCSP
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify that OCSP requests need to be URL encoded
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Document new CRL config parameters
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify notes about cross-cluster options
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* Add docs on cross-cluster listing endpoints
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update website/content/api-docs/secret/pki.mdx
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Steven Clark <steven.clark@hashicorp.com>
* List tidy parameters in one place
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add new tidy status outputs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs on new tidy parameters
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add ability to clean up host keys for dynamic keys
This adds a new endpoint, tidy/dynamic-keys that removes any stale host
keys still present on the mount. This does not clean up any pending
dynamic key leases and will not remove these keys from systems with
authorized hosts entries created by Vault.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove dynamic keys from SSH Secrets Engine
This removes the functionality of Vault creating keys and adding them to
the authorized keys file on hosts.
This functionality has been deprecated since Vault version 0.7.2.
The preferred alternative is to use the SSH CA method, which also allows
key generation but places limits on TTL and doesn't require Vault reach
out to provision each key on the specified host, making it much more
secure.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove dynamic ssh references from documentation
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove dynamic key secret type entirely
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify changelog language
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add removal notice to the website
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
---------
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify error on due to unsupported EC key bits
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove documentation about unsupported EC/224
Resolves: #18843
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* The fields.
* UserID set, add to certificate
* Changelog.
* Fix test (set default).
* Add UserID constant to certutil, revert extension changes
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add user_ids as field for leaf signing
Presumably, this isn't necessary for CAs, given that CAs probably don't
have a user ID corresponding to them.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Support setting multiple user_ids in Subject
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow any User ID with sign-verbatim
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for User IDs in PKI
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs about user_ids, allowed_user_ids
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
* change indentation leve of cas field
* change formatting for cas_required
Co-authored-by: Yoko Hyakuna <yoko@hashicorp.com>
Co-authored-by: Yoko Hyakuna <yoko@hashicorp.com>
* Allow tidy to backup legacy CA bundles
With the new tidy_move_legacy_ca_bundle option, we'll use tidy to move
the legacy CA bundle from /config/ca_bundle to /config/ca_bundle.bak.
This does two things:
1. Removes ca_bundle from the hot-path of initialization after initial
migration has completed. Because this entry is seal wrapped, this
may result in performance improvements.
2. Allows recovery of this value in the event of some other failure
with migration.
Notably, this cannot occur during migration in the unlikely (and largely
unsupported) case that the operator immediately downgrades to Vault
<1.11.x. Thus, we reuse issuer_safety_buffer; while potentially long,
tidy can always be run manually with a shorter buffer (and only this
flag) to manually move the bundle if necessary.
In the event of needing to recover or undo this operation, it is
sufficient to use sys/raw to read the backed up value and subsequently
write it to its old path (/config/ca_bundle).
The new entry remains seal wrapped, but otherwise isn't used within the
code and so has better performance characteristics.
Performing a fat deletion (DELETE /root) will again remove the backup
like the old legacy bundle, preserving its wipe characteristics.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation about new tidy parameter
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for migration scenarios
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clean up time comparisons
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add cluster_aia_path templating variable
Per discussion with maxb, allow using a non-Vault distribution point
which may use an insecure transport for RFC 5280 compliance.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address feedback from Max
Co-authored-by: Max Bowsher <maxbowsher@gmail.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Max Bowsher <maxbowsher@gmail.com>
* Return the partial success code override for all batch error types
* changelog
* docs
* Lost the actual override logic. :)
* And don't hardcode 400
* gate on success
* Rename path_config -> path_keys_config
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add config/keys to disable upserting
Transit would allow anyone with Create permissions on the encryption
endpoint to automatically create new encryption keys. This becomes hard
to reason about for operators, especially if typos are subtly
introduced (e.g., my-key vs my_key) -- there is no way to merge these
two keys afterwards.
Add the ability to globally disable upserting, so that if the
applications using Transit do not need the capability, it can be
globally disallowed even under permissive policies.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on disabling upsert
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update website/content/api-docs/secret/transit.mdx
Co-authored-by: tjperry07 <tjperry07@users.noreply.github.com>
* Update website/content/api-docs/secret/transit.mdx
Co-authored-by: tjperry07 <tjperry07@users.noreply.github.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: tjperry07 <tjperry07@users.noreply.github.com>
* Allow templating of cluster-local AIA URIs
This adds a new configuration path, /config/cluster, which retains
cluster-local configuration. By extending /config/urls and its issuer
counterpart to include an enable_templating parameter, we can allow
operators to correctly identify the particular cluster a cert was
issued on, and tie its AIA information to this (cluster, issuer) pair
dynamically.
Notably, this does not solve all usage issues around AIA URIs: the CRL
and OCSP responder remain local, meaning that some merge capability is
required prior to passing it to other systems if they use CRL files and
must validate requests with certs from any arbitrary PR cluster.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation about templated AIAs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* AIA URIs -> AIA URLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* issuer.AIAURIs might be nil
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow non-nil response to config/urls
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Always validate URLs on config update
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure URLs lack templating parameters
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Review feedback
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* New PKI API to generate and sign a CRL based on input data
- Add a new PKI API that allows an end-user to feed in all the
information required to generate and sign a CRL by a given issuer.
- This is pretty powerful API allowing an escape hatch for 3rd parties
to craft customized CRLs with extensions based on their individual
needs
* Add api-docs and error if reserved extension is provided as input
* Fix copy/paste error in Object Identifier constants
* Return nil on errors instead of partially filled slices
* Add cl
