* Add an idle timeout for the server
Because tidy operations can be long-running, this also changes all tidy
operations to behave the same operationally (kick off the process, get a
warning back, log errors to server log) and makes them all run in a
goroutine.
This could mean a sort of hard stop if Vault gets sealed because the
function won't have the read lock. This should generally be okay
(running tidy again should pick back up where it left off), but future
work could use cleanup funcs to trigger the functions to stop.
* Fix up tidy test
* Add deadline to cluster connections and an idle timeout to the cluster server, plus add readheader/read timeout to api server
If we have a panic defer functions are run but unlocks aren't. Since we
can't really trust plugins and storage, this backs out the changes for
those parts of the request path.
* This changes the way policies are reported in audit logs.
Previously, only policies tied to tokens would be reported. This could
make it difficult to perform after-the-fact analysis based on both the
initial response entry and further requests. Now, the full set of
applicable policies from both the token and any derived policies from
Identity are reported.
To keep things consistent, token authentications now also return the
full set of policies in api.Secret.Auth responses, so this both makes it
easier for users to understand their actual full set, and it matches
what the audit logs now report.
* Remove a lot of deferred functions in the request path.
There is an interesting benchmark at https://www.reddit.com/r/golang/comments/3h21nk/simple_micro_benchmark_to_measure_the_overhead_of/
It shows that defer actually adds quite a lot of overhead -- maybe 100ns
per call but we defer a *lot* of functions in the request path. So this
removes some of the ones in request handling, ha, barrier, router, and
physical cache.
One meta-note: nearly every metrics function is in a defer which means
every metrics call we add could add a non-trivial amount of time, e.g.
for every 10 extra metrics statements we add 1ms to a request. I don't
know how to solve this right now without doing what I did in some of
these cases and putting that call into a simple function call that then
goes before each return.
* Simplify barrier defer cleanup
* Store lease times suitable for export in pending
This essentially caches lease information for token lookups, preventing
going to disk over and over.
* Simplify logic
Taking inspiration from
https://github.com/golang/go/issues/17604#issuecomment-256384471
suggests that taking the address of a stack variable for use in atomics
works (at least, the race detector doesn't complain) but is doing it
wrong.
The only other change is a change in Leader() detecting if HA is enabled
to fast-path out. This value never changes after NewCore, so we don't
need to grab the read lock to check it.
* Add entity information request to system view
* fixing a few comments
* sharing types between plugin and logical
* sharing types between plugin and logical
* fixing output directory for proto
* removing extra replacement
* adding mount type lookup
* empty entities return nil instead of error
* adding some comments
* Add key information to list endpoints in identity.
Also fixes some bugs from before where we were persisting data that we
should not have been (mount type/path).
* Add cached lookups of real time mount info
* Optimize revokeSalted by not calling view.List twice
* Minor comment update
* Do not go through the orphaning dance if we are revoking the entire tree
* Update comment
* Hand off lease expiration to expiration manager via timers
* Use sync.Map as the cache to track token deletion state
* Add CreateOrFetchRevocationLeaseByToken to hand off token revocation to exp manager
* Update revoke and revoke-self handlers
* Fix tests
* revokeSalted: Move token entry deletion into the deferred func
* Fix test race
* Add blocking lease revocation test
* Remove test log
* Add HandlerFunc on NoopBackend, adjust locks, and add test
* Add sleep to allow for revocations to settle
* Various updates
* Rename some functions and variables to be more clear
* Change step-down and seal to use expmgr for revoke functionality like
during request handling
* Attempt to WAL the token as being invalid as soon as possible so that
further usage will fail even if revocation does not fully complete
* Address feedback
* Return invalid lease on negative TTL
* Revert "Return invalid lease on negative TTL"
This reverts commit a39597ecdc23cf7fc69fe003eef9f10d533551d8.
* Extend sleep on tests
This takes place in two parts, since working on this exposed an issue
with response wrapping when there is a raw body set. The changes are (in
diff order):
* A CurrentWrappingLookupFunc has been added to return the current
value. This is necessary for the lookahead call since we don't want the
lookahead call to be wrapped.
* Support for unwrapping < 0.6.2 tokens via the API/CLI has been
removed, because we now have backends returning 404s with data and can't
rely on the 404 trick. These can still be read manually via
cubbyhole/response.
* KV preflight version request now ensures that its calls is not
wrapped, and restores any given function after.
* When responding with a raw body, instead of always base64-decoding a
string value and erroring on failure, on failure we assume that it
simply wasn't a base64-encoded value and use it as is.
* A test that fails on master and works now that ensures that raw body
responses that are wrapped and then unwrapped return the expected
values.
* A flag for response data that indicates to the wrapping handling that
the data contained therein is already JSON decoded (more later).
* RespondWithStatusCode now defaults to a string so that the value is
HMAC'd during audit. The function always JSON encodes the body, so
before now it was always returning []byte which would skip HMACing. We
don't know what's in the data, so this is a "better safe than sorry"
issue. If different behavior is needed, backends can always manually
populate the data instead of relying on the helper function.
* We now check unwrapped data after unwrapping to see if there were raw
flags. If so, we try to detect whether the value can be unbase64'd. The
reason is that if it can it was probably originally a []byte and
shouldn't be audit HMAC'd; if not, it was probably originally a string
and should be. In either case, we then set the value as the raw body and
hit the flag indicating that it's already been JSON decoded so not to
try again before auditing. Doing it this way ensures the right typing.
* There is now a check to see if the data coming from unwrapping is
already JSON decoded and if so the decoding is skipped before setting
the audit response.
* Update kv command to use a preflight check
* Make the existing ui endpoint return the allowed mounts
* Add kv subcommand tests
* Enable `-field` in `vault kv get/put` (#4426)
* Enable `-field` in `vault kv get/put`
Fixes#4424
* Unify nil value handling
* Use preflight helper
* Update vkv plugin
* Add all the mount info when authenticated
* Add fix the error message on put
* add metadata test
* No need to sort the capabilities
* Remove the kv client header
* kv patch command (#4432)
* Fix test
* Fix tests
* Use permission denied instead of entity disabled
A few notes:
* We exert positive control over singletons and they usually need to
perform some (known, validated) writes, so this excludes singletons --
they are simply limited to the end of the mount function as before.
* I'm not sure how to test this _specifically_; I've done some testing
of e.g. sealing vault and unsealing and ensuring that I can write to a
KV mount. I think this is tested by every dev server though, since for a
dev server Vault is inited, the default mounts are mounted, then it's
sealed, then it's unsealed for the user, so it already goes through this
code path. The mere fact that you can write to secret/ on a dev server
means it was successfully set read-write.
* Allow returning list information and other data in 404s.
On read it'll output data and/or warnings on a 404 if they exist. On
list, the same behavior; the actual 'vault list' command doesn't change
behavior though in terms of output unless there are no actual keys (so
it doesn't just magically show other data).
This corrects some assumptions in response_util and wrapping.go; it also
corrects a few places in the latter where it could leak a (useless)
token in some error cases.
* Use same 404 logic in delete/put too
* Add the same secret parsing logic to the KV request functions
* govet cleanup in token store
* adding general ttl handling to login requests
* consolidating TTL calculation to system view
* deprecate LeaseExtend
* deprecate LeaseExtend
* set the increment to the correct value
* move calculateTTL out of SystemView
* remove unused value
* add back clearing of lease id
* implement core ttl in some backends
* removing increment and issue time from lease options
* adding ttl tests, fixing some compile issue
* adding ttl tests
* fixing some explicit max TTL logic
* fixing up some tests
* removing unneeded test
* off by one errors...
* adding back some logic for bc
* adding period to return on renewal
* tweaking max ttl capping slightly
* use the appropriate precision for ttl calculation
* deprecate proto fields instead of delete
* addressing feedback
* moving TTL handling for backends to core
* mongo is a secret backend not auth
* adding estimated ttl for backends that also manage the expiration time
* set the estimate values before calling the renew request
* moving calculate TTL to framework, revert removal of increment and issue time from logical
* minor edits
* addressing feedback
* address more feedback
* adding UI handlers and UI header configuration
* forcing specific static headers
* properly getting UI config value from config/environment
* fixing formatting in stub UI text
* use http.Header
* case-insensitive X-Vault header check
* fixing var name
* wrap both stubbed and real UI in header handler
* adding test for >1 keys
* logbridge with hclog and identical output
* Initial search & replace
This compiles, but there is a fair amount of TODO
and commented out code, especially around the
plugin logclient/logserver code.
* strip logbridge
* fix majority of tests
* update logxi aliases
* WIP fixing tests
* more test fixes
* Update test to hclog
* Fix format
* Rename hclog -> log
* WIP making hclog and logxi love each other
* update logger_test.go
* clean up merged comments
* Replace RawLogger interface with a Logger
* Add some logger names
* Replace Trace with Debug
* update builtin logical logging patterns
* Fix build errors
* More log updates
* update log approach in command and builtin
* More log updates
* update helper, http, and logical directories
* Update loggers
* Log updates
* Update logging
* Update logging
* Update logging
* Update logging
* update logging in physical
* prefixing and lowercase
* Update logging
* Move phyisical logging name to server command
* Fix som tests
* address jims feedback so far
* incorporate brians feedback so far
* strip comments
* move vault.go to logging package
* update Debug to Trace
* Update go-plugin deps
* Update logging based on review comments
* Updates from review
* Unvendor logxi
* Remove null_logger.go
* Handle removal of parent index on revoke-orphan and tidy operations
* Refactor handleTidy to use same for loop children deletion of invalid parent entry
* Update comments
* Add logic for revoke-orphan and tidy to turn no-parent tokens into orphans
* Add orphan check to test
* Update test comments
* Fix TestTokenStore_Revoke_Orphan test
* Address feedback, add explicit delete when parent prefix is empty
* Revert explicit delete, add comment on why it's not done
* Update comment to indicate ok on marking token as orphan
* Fix test
* Add more cli subcommands
* Add metadata commands
* Add more subcommands
* Update cli
* Move archive commands to delete
* Add helpers for making http calls to the kv backend
* rename cli header
* Format the various maps from kv
* Add list command
* Update help text
* Add a command to enable versioning on a backend
* Rename enable-versions command
* Some review feedback
* Fix listing of top level keys
* Fix issue when metadata is nil
* Add test for lising top level keys
* Fix some typos
* Add a note about deleting all versions
* Add some requirements for versioned k/v
* Add a warning message when an upgrade is triggered
* Add path help values
* Make the kv header a const
* Add the uid to mount entry instead of options map
* Pass the backend aware uuid to the mounts and plugins
* Fix comment
* Add options to secret/auth enable and tune CLI commands (#4170)
* Switch mount/tune options to use TypeKVPairs (#4171)
* switching options to TypeKVPairs, adding bool parse for versioned flag
* flipping bool check
* Fix leases coming back from non-leased pluin kv store
* add a test for updating mount options
* Fix tests
* Add audit hmac values to AuthConfigInput and AuthConfigOutput, fix docs
* docs: Add ttl params to auth enable endpoint
* Rewording of go string to simply string
* Add audit hmac keys as CLI flags on auth/secrets enable
* Fix copypasta mistake
* WIP on auth-list endpoint
* Rename variable to be singular, add CLI flag, show value in auth and secrets list
* Add audit hmac keys to auth and secrets list
* Only set config values if they exist
* Fix http sys/auth tests
* More auth plugin_name test fixes
* Rename tag internal_ui_show_mount to _ui_show_mount
* Add tests
* Make endpoint unauthed
* Rename field to listing_visibility
* Add listing-visibility to cli tune commands
* Use ListingVisiblityType
* Fix type conversion
* Do not actually change token's value on testHttpGet
* Remove unused ListingVisibilityAuth, use const in pathInternalUIMountsRead
Prior to this policy writes against a performance secondary would not
succeed because the read-only error was swallowed by handleError. In
addition to fixing this, it adds a similar function that explicitly
doesn't trigger forwarding. This is useful for things that are local to
the secondary such as raw operations and lease management.
* Add audit hmac values to AuthConfigInput and AuthConfigOutput, fix docs
* docs: Add ttl params to auth enable endpoint
* Rewording of go string to simply string
* Add audit hmac keys as CLI flags on auth/secrets enable
* Fix copypasta mistake
* Add audit hmac keys to auth and secrets list
* Only set config values if they exist
* Fix http sys/auth tests
* More auth plugin_name test fixes
* Pass API values into MountEntry's config when creating auth/secrets mount
* Update usage wording
* Use an atomic value instead to communicate whether to give up HA lock
* Remove now-unneeded StopOptions struct
* Add a channel based mutex acquisition function to avoid a deadlock
* Make periodic leader refresh only spawn a single waiting goroutine and
extend logic to the key upgrade check
* Add the ability to use multiple paths for capability checking. WIP
(tests, docs).
Fixes#3336
* Added tests
* added 'paths' field
* Update docs
* return error if paths is not supplied
