- Return a detailed reponse within the list api that an end-user can
use to determine what clusters revoked the certificate on from the
pki/certs/unified-revoked LIST api.
- Return colon delimited serial numbers from the certs/revocation-queue
LIST api
* Add new tidy operation for cross revoked certs
This operation allows tidying of the cross-cluster revocation storage.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix missing cancels, status values
Previous additions to tidy didn't have enough cancel operations and left
out some new values from the status operation.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify error on due to unsupported EC key bits
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove documentation about unsupported EC/224
Resolves: #18843
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
- I missed this in the original review, that we were storing the
unified-crl in a cluster-local storage area so none of the other
hosts would receive it.
- Discovered while writing unit tests, the main cluster had the unified
crl but the other clusters would return an empty response
* The fields.
* UserID set, add to certificate
* Changelog.
* Fix test (set default).
* Add UserID constant to certutil, revert extension changes
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add user_ids as field for leaf signing
Presumably, this isn't necessary for CAs, given that CAs probably don't
have a user ID corresponding to them.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Support setting multiple user_ids in Subject
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow any User ID with sign-verbatim
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for User IDs in PKI
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs about user_ids, allowed_user_ids
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
- It does not make sense to allow operators to enable the cross-cluster
revocation features on local mounts as they will never have a
corresponding mount on the other cluster.
* Add unified CRL config storage helpers
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add support to build unified CRLs
This allows us to build unified versions of both the complete and delta
CRLs. This mostly involved creating a new variant of the
unified-specific CRL builder, fetching certs from each cluster's storage
space.
Unlike OCSP, here we do not unify the node's local storage with the
cross-cluster storage: this node is the active of the performance
primary, so writes to unified storage happen exactly the same as
writes to cluster-local storage, meaning the two are always in
sync. Other performance secondaries do not rebuild the CRL, and hence
the out-of-sync avoidance that we'd like to solve with the OCSP
responder is not necessary to solve here.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add ability to fetch unified CRLs
This adds to the path-fetch APIs the ability to return the unified CRLs.
We update the If-Modified-Since infrastructure to support querying the
unified CRL specific data and fetchCertBySerial to support all unified
variants. This works for both the default/global fetch APIs and the
issuer-specific fetch APIs.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rebuild CRLs on unified status changes
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Handle rebuilding CRLs due to either changing
This allows detecting if the Delta CRL needs to be rebuilt because
either the local or the unified CRL needs to be rebuilt. We never
trigger rebuilding the unified delta on a non-primary cluster.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure serials aren't added to unified CRL twice
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Write delta WAL entries for unified CRLs
When we'd ordinarily write delta WALs for local CRLs, we also need to
populate the cross-cluster delta WAL. This could cause revocation to
appear to fail if the two clusters are disconnected, but notably regular
cross-cluster revocation would also fail.
Notably, this commit also changes us to not write Delta WALs when Delta
CRLs is disabled (versus previously doing it when auto rebuild is
enabled in case Delta CRLs were later asked for), and instead,
triggering rebuilding a complete CRL so we don't need up-to-date Delta
WAL info.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update IMS test for forced CRL rebuilds
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Move comment about perf-primary only invalidation
Also remove noisy debug log.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove more noisy log statements during queue
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Skip revocation entries from our current cluster
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add locking and comment about tidying revoke queue
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Switch to time.Since for tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor tidyStatuses into path_tidy.go
Leaving these in backend.go often causes us to miss adding useful values
to tidyStatus when we add a new config parameter.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Track the number of deleted revocation request
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow tidy to remove confirmed revocation requests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing field to tidy test
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add global, cross-cluster revocation queue to PKI
This adds a global, cross-cluster replicated revocation queue, allowing
operators to revoke certificates by serial number across any cluster. We
don't support revoking with private key (PoP) in the initial
implementation.
In particular, building on the PBPWF work, we add a special storage
location for handling non-local revocations which gets replicated up to
the active, primary cluster node and back down to all secondary PR
clusters. These then check the pending revocation entry and revoke the
serial locally if it exists, writing a cross-cluster confirmation entry.
Listing capabilities are present under pki/certs/revocation-queue,
allowing operators to see which certs are present. However, a future
improvement to the tidy subsystem will allow automatic cleanup of stale
entries.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow tidying revocation queue entries
No manual operator control of revocation queue entries are allowed.
However, entries are stored with their request time, allowing tidy to,
after a suitable safety buffer, remove these unconfirmed and presumably
invalid requests.
Notably, when a cluster goes offline, it will be unable to process
cross-cluster revocations for certificates it holds. If tidy runs,
potentially valid revocations may be removed. However, it is up to the
administrator to ensure the tidy window is sufficiently long that any
required maintenance is done (or, prior to maintenance when an issue is
first noticed, tidy is temporarily disabled).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Only allow enabling global revocation queue on Vault Enterprise
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use a locking queue to handle revocation requests
This queue attempts to guarantee that PKI's invalidateFunc won't have
to wait long to execute: by locking only around access to the queue
proper, and internally using a list, we minimize the time spent locked,
waiting for queue accesses.
Previously, we held a lock during tidy and processing that would've
prevented us from processing invalidateFunc calls.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* use_global_queue->cross_cluster_revocation
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Grab revocation storage lock when processing queue
We need to grab the storage lock as we'll actively be revoking new
certificates in the revocation queue. This ensures nobody else is
competing for storage access, across periodic funcs, new revocations,
and tidy operations.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix expected tidy status test
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow probing RollbackManager directly in tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address review feedback on revocationQueue
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add more cancel checks, fix starting manual tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor CRL building into separate functions
This will allow us to add the ability to add and build a unified CRL
across all clusters, reusing logic that is common to both, but letting
each have their own certificate lists.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rename localCRLConfigEntry->internalCRLConfigEntry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rename Delta WALs to Local Delta WALs
This adds clarity that we'll have a separate local and remote Delta CRL
and WALs for each.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
This PR modifies every test in `builtin/credentials/approle/path_role_test.go` with new validation checks to ensure that approle/path_role successful responses align with the declared response schema.
It also introduces a test helper in `sdk/helper/testhelpers`:
```go
func FindResponseSchema(t *testing.T, ...)
```
This test helper will be useful for all plugins that require similar response schema validation in tests.
### Background
This PR is part of the ongoing work to add structured responses in Vault OpenAPI (VLT-234)
* Rename revokeCert variable to identify serial number formatting
* Refactor out lease specific behavior out of revokeCert
- Isolate the specific behavior regarding revoking lease specific
certificates outside of the revokeCert function and into the only
caller that leveraged used it.
- This allows us to simplify revokeCert a little bit and keeps the
function purely about revoking a certificate
* Within revokeCert short circuit the already revoked use-case
- Make the function a little easier to process by exiting early
if the certificate has already been revoked.
* Do not load certificates from storage multiple times during revocation
- Isolate the loading of a certificate and parsing of a certificate
into a single attempt, either when provided the certificate for BYOC
revocation or strictly from storage for the other revocation types.
* With BYOC write certificate entry using dashes not the legacy colon char
This PR relates to a feature request logged through HashiCorp commercial
support.
Vault lacks pagination in its APIs. As a result, certain list operations
can return **very** large responses. The user's chosen audit sinks may
experience difficulty consuming audit records that swell to tens of
megabytes of JSON.
In our case, one of the systems consuming audit log data could not cope,
and failed.
The responses of list operations are typically not very interesting, as
they are mostly lists of keys, or, even when they include a "key_info"
field, are not returning confidential information. They become even less
interesting once HMAC-ed by the audit system.
Some example Vault "list" operations that are prone to becoming very
large in an active Vault installation are:
auth/token/accessors/
identity/entity/id/
identity/entity-alias/id/
pki/certs/
In response, I've coded a new option that can be applied to audit
backends, `elide_list_responses`. When enabled, response data is elided
from audit logs, only when the operation type is "list".
For added safety, the elision only applies to the "keys" and "key_info"
fields within the response data - these are conventionally the only
fields present in a list response - see logical.ListResponse, and
logical.ListResponseWithInfo. However, other fields are technically
possible if a plugin author writes unusual code, and these will be
preserved in the audit log even with this option enabled.
The elision replaces the values of the "keys" and "key_info" fields with
an integer count of the number of entries. This allows even the elided
audit logs to still be useful for answering questions like "Was any data
returned?" or "How many records were listed?".
* Allow tidy to backup legacy CA bundles
With the new tidy_move_legacy_ca_bundle option, we'll use tidy to move
the legacy CA bundle from /config/ca_bundle to /config/ca_bundle.bak.
This does two things:
1. Removes ca_bundle from the hot-path of initialization after initial
migration has completed. Because this entry is seal wrapped, this
may result in performance improvements.
2. Allows recovery of this value in the event of some other failure
with migration.
Notably, this cannot occur during migration in the unlikely (and largely
unsupported) case that the operator immediately downgrades to Vault
<1.11.x. Thus, we reuse issuer_safety_buffer; while potentially long,
tidy can always be run manually with a shorter buffer (and only this
flag) to manually move the bundle if necessary.
In the event of needing to recover or undo this operation, it is
sufficient to use sys/raw to read the backed up value and subsequently
write it to its old path (/config/ca_bundle).
The new entry remains seal wrapped, but otherwise isn't used within the
code and so has better performance characteristics.
Performing a fat deletion (DELETE /root) will again remove the backup
like the old legacy bundle, preserving its wipe characteristics.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation about new tidy parameter
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for migration scenarios
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clean up time comparisons
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly distinguish empty issuer names
When using client.Logical().JSONMergePatch(...) with an empty issuer
name, patch incorrectly reports:
> issuer name contained invalid characters
In this case, both the error in getIssuerName(...) is incorrect and
patch should allow setting an empty issuer name explicitly.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add cluster_aia_path templating variable
Per discussion with maxb, allow using a non-Vault distribution point
which may use an insecure transport for RFC 5280 compliance.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address feedback from Max
Co-authored-by: Max Bowsher <maxbowsher@gmail.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Max Bowsher <maxbowsher@gmail.com>
This was not copied over when the this code was
copied in https://github.com/hashicorp/vault/pull/12340.
Also adds a stub for the `.copywrite.hcl` file (for when
Vault is onboarded to Copywrite) and adds the `pkcs7` and
`ui/node_modules` to the ignore pattern.
* Add issuer reference info on JSON endpoint
This endpoint is unauthenticated and shouldn't contain sensitive
information. However, listing the issuers (LIST /issuers) already
returns both the issuer ID and the issuer name (if any) so this
information is safe to return here.
When fetching /pki/issuer/default/json, it would be nice to know exactly
which issuer ID and name it corresponds to, without having to fetch the
authenticated endpoint as well.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Bad news: the hot patch we were using breaks in Go 1.19.4: 6109c07ec4
Good news: we can now patch with an environment variable at runtime.
Co-authored-by: Christopher Swenson <christopher.swenson@hashicorp.com>
* Return the partial success code override for all batch error types
* changelog
* docs
* Lost the actual override logic. :)
* And don't hardcode 400
* gate on success
* Rename path_config -> path_keys_config
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add config/keys to disable upserting
Transit would allow anyone with Create permissions on the encryption
endpoint to automatically create new encryption keys. This becomes hard
to reason about for operators, especially if typos are subtly
introduced (e.g., my-key vs my_key) -- there is no way to merge these
two keys afterwards.
Add the ability to globally disable upserting, so that if the
applications using Transit do not need the capability, it can be
globally disallowed even under permissive policies.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on disabling upsert
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update website/content/api-docs/secret/transit.mdx
Co-authored-by: tjperry07 <tjperry07@users.noreply.github.com>
* Update website/content/api-docs/secret/transit.mdx
Co-authored-by: tjperry07 <tjperry07@users.noreply.github.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: tjperry07 <tjperry07@users.noreply.github.com>
A lot of places took a (context, backend, request) tuple, ignoring the
request proper and only using it for its storage. This (modified) tuple
is exactly the set of elements in the shared storage context, so we
should be using that instead of manually passing all three elements
around.
This simplifies a few places where we'd generate a storage context at
the request level and then split it apart only to recreate it again
later (e.g., CRL building).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
- Nick brought this to our attention, one of the PKI test suites
is overwriting the production code's value leading to a data race
issue.
- Remove the setting of the variable with the same value from the test
suite.
This PR modifies the path schema of `approle/path_role.go`, switching the old `Callbacks` to the equivalent `Operations` objects with a list of response fields for the 200 responses. This will allow us to generate a response structures in openapi.json. This PR is split out from #18055 along with #18192.
### Example
For `GET "/auth/approle/role/{role_name}/bind-secret-id"` path, it will update the response as follows:
```diff
"responses": {
"200": {
"description": "OK",
++ "content": {
++ "application/json": {
++ "schema": {
++ "$ref": "#/components/schemas/ApproleRoleBindSecretIdResponse"
++ }
++ }
}
}
}
```
And will add the actual response structure:
```diff
++ "ApproleRoleBindSecretIdResponse": {
++ "type": "object",
++ "properties": {
++ "bind_secret_id": {
++ "type": "boolean",
++ "description": "Impose secret_id to be presented when logging in using this role. Defaults to 'true'."
++ }
++ }
++ },
```
* Respond with data to all writes in PKI engine
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow templating of cluster-local AIA URIs
This adds a new configuration path, /config/cluster, which retains
cluster-local configuration. By extending /config/urls and its issuer
counterpart to include an enable_templating parameter, we can allow
operators to correctly identify the particular cluster a cert was
issued on, and tie its AIA information to this (cluster, issuer) pair
dynamically.
Notably, this does not solve all usage issues around AIA URIs: the CRL
and OCSP responder remain local, meaning that some merge capability is
required prior to passing it to other systems if they use CRL files and
must validate requests with certs from any arbitrary PR cluster.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation about templated AIAs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* AIA URIs -> AIA URLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* issuer.AIAURIs might be nil
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow non-nil response to config/urls
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Always validate URLs on config update
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure URLs lack templating parameters
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Review feedback
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address a nil panic when writing an empty POST request to the ocsp handler
- Seems when no JSON body is sent with a POST request Vault will not
populate the HTTPRequest member variable which caused the nil panic
- vault write -force pki/ocsp
- Add a check for it and the Body member variable to be nil before use.
* Add cl
* Add tests using client certificates
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor Go TLS client tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for CRLs
Note that Delta CRL support isn't present in nginx or apache, so we lack
a server-side test presently. Wget2 does appear to support it however,
if we wanted to add a client-side OpenSSL test.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add checks for delta CRL with wget2
This ensures the delta CRL is properly formatted and accepted by
OpenSSL.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Re-add missing test helpers
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rename clientFullChain->clientWireChain
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rename integation_test.go->integration_test.go
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add ability to fetch container's network addresses
This lets us return the on-network container address, allowing us to
spawn client containers which contact server containers.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add integration tests with nginx, curl, wget, Go
We build new integration tests, spawning a test instance on nginx and
ensuring we can connect with a variety of clients against a variety of
CA and leaf certificate types. This will ultimately let us detect issues
with compatibility as we expand the matrix of supported servers and
clients.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Make runner reference unique
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Attempt to fix CI with longer wait
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Finish moving nginx tests to pkiext package
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* make fmt
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add more debugging, work on CircleCI
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Removes _builtin_ versions from mount storage where it already exists
* Stops new builtin versions being put into storage on mount creation/tuning
* Stops the plugin catalog from returning a builtin plugin that has been overridden, so it more accurately reflects the plugins that are available to actually run
* New PKI API to generate and sign a CRL based on input data
- Add a new PKI API that allows an end-user to feed in all the
information required to generate and sign a CRL by a given issuer.
- This is pretty powerful API allowing an escape hatch for 3rd parties
to craft customized CRLs with extensions based on their individual
needs
* Add api-docs and error if reserved extension is provided as input
* Fix copy/paste error in Object Identifier constants
* Return nil on errors instead of partially filled slices
* Add cl
* wip
* Add cached OCSP client support to Cert Auth
* ->pointer
* Code cleanup
* Fix unit tests
* Use an LRU cache, and only persist up to 1000 of the most recently used values to stay under the storage entry limit
* Fix caching, add fail open mode parameter to cert auth roles
* reduce logging
* Add the retry client and GET then POST logic
* Drop persisted cache, make cache size configurable, allow for parallel testing of multiple servers
* dead code
* Update builtin/credential/cert/path_certs.go
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Hook invalidate to reinit the ocsp cache size
* locking
* Conditionally init the ocsp client
* Remove cache size config from cert configs, it's a backend global
* Add field
* Remove strangely complex validity logic
* Address more feedback
* Rework error returning logic
* More edge cases
* MORE edge cases
* Add a test matrix with a builtin responder
* changelog
* Use an atomic for configUpdated
* Actually use ocsp_enabled, and bind to a random port for testing
* Update builtin/credential/cert/path_login.go
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor unit tests
* Add status to cache
* Make some functions private
* Rename for testing, and attribute
* Up to date gofumpt
* remove hash from key, and disable the vault dependent unit test
* Comment out TestMultiOCSP
* imports
* more imports
* Address semgrep results
* Attempt to pass some sort of logging to test_responder
* fix overzealous search&replace
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add crl list capabilities to cert auth
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs on cert auth CRL listing
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test for cert auth listing
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Steven Clark