65ceb3439d
Be consistent as both are the same pointer here
2015-09-10 15:09:54 -04:00
c460ff10ca
Push a lot of logic into Router to make a bunch of it nicer and enable a
...
lot of cleanup. Plumb config and calls to framework.Backend.Setup() into
logical_system and elsewhere, including tests.
2015-09-10 15:09:54 -04:00
488d33c70a
Rejig how dynamic values are represented in system view and location of some functions in various packages; create mount-tune command and API analogues; update documentation
2015-09-10 15:09:54 -04:00
17c60d3e78
Add logic to core to fetch a SystemView for a given mount entry and use those values for default/max TTL. The SystemView will reflect system defaults if not set for that mount.
2015-09-10 15:09:53 -04:00
98d0d23d70
Ensure token store is available when looking up token
2015-09-01 08:21:47 -04:00
3f45f3f41b
Rename config lease_duration parameters to lease_ttl in line with current standardization efforts
2015-08-27 07:50:24 -07:00
cc232e6f79
Address comments from review.
2015-08-25 15:33:58 -07:00
c887df93cc
Add support for pgp-keys argument to rekey, as well as tests, plus
...
refactor common bits out of init.
2015-08-25 14:52:13 -07:00
f57e7892e7
Don't store the given public keys in the seal config
2015-08-25 14:52:13 -07:00
2f3e245b0b
Add support for "pgp-tokens" parameters to init.
...
There are thorough unit tests that read the returned
encrypted tokens, seal the vault, and unseal it
again to ensure all works as expected.
2015-08-25 14:52:13 -07:00
93ef9a54bd
Internally refactor Lease/LeaseGracePeriod into TTL/GracePeriod
2015-08-20 18:00:51 -07:00
db79dd8c22
Don't defer revocation when sealing, and clear out response/auth if there is a token use error
2015-08-20 10:37:42 -07:00
0e8e3660ff
Fix #461 properly by defering potential revocation of a token until after the request is fully handled.
2015-08-20 10:14:13 -07:00
151ec72d00
Add configuration options for default lease duration and max lease duration.
2015-07-30 09:42:49 -04:00
41b72a4d39
vault: provide view to backend initializer for setup
2015-06-30 17:30:43 -07:00
8bc99f8c23
helper/uuid: single generateUUID definition
2015-06-30 12:38:32 -07:00
496ebe561c
vault: cleanups for the audit log changes
2015-06-29 15:27:28 -07:00
b667ef4c71
Collapsing audit response logging to a single point
2015-06-18 19:48:26 -07:00
4ec685dc1a
Logging authentication errors and bad token usage
2015-06-18 18:30:18 -07:00
dbf6cf6e6d
vault: support core shutdown
2015-06-17 18:23:59 -07:00
5c75a6c5c7
vault: ensure token renew does not double register
2015-06-17 15:22:50 -07:00
daffef08db
vault: reload master key before keyring
2015-05-29 14:30:03 -07:00
4f5fde039f
vault: all rekey commands should fail as standby
2015-05-29 11:52:37 -07:00
5aaad32af8
vault: ensure upgrades are cleaned up
2015-05-28 16:52:06 -07:00
db0afc9ebe
vault: move upgrade logic out of core
2015-05-28 16:43:44 -07:00
82ef0b1ac7
vault: handle read of key upgrades
2015-05-28 16:11:31 -07:00
c60970e743
vault: prevent rekey on standby
2015-05-28 15:26:35 -07:00
01e890653c
vault: more logging
2015-05-28 14:15:06 -07:00
0877160754
vault: minor rekey cleanups
2015-05-28 12:07:52 -07:00
361c722c5c
vault: first pass at rekey
2015-05-28 11:40:01 -07:00
3bcd32228d
vault: lease renewal should not create new lease entry
2015-05-15 17:47:39 -07:00
843d9e6484
vault: verify login endpoint never returns a secret
2015-05-09 11:51:58 -07:00
13ab31f4b5
vault: ensure InternalData is never returned from the core
2015-05-09 11:47:46 -07:00
c7496772d4
vault: defer barrier initialization until as late as possible
2015-05-08 11:06:39 -07:00
a6eef6bba3
vault: Guard against an invalid seal config
2015-05-08 11:05:31 -07:00
727e0e90cd
vault: validate advertise addr is valid URL [GH-106]
2015-05-02 13:28:33 -07:00
e80111502b
vault: way more verbose error if mlock fails [GH-59]
2015-04-28 18:56:16 -07:00
b5f8f3b05a
vault: add helper/mlock for doing mlock
2015-04-28 14:59:43 -07:00
2e55c3de68
vault: ability to toggle mlock on core
2015-04-27 16:40:14 -07:00
2f0995d650
vault: Swap the HAEnabled check with the sealed check
2015-04-20 12:19:09 -07:00
c5f914cb34
vault: Lock memory when possible
2015-04-19 13:42:47 -07:00
4473abd6ce
vault: core enforcement of limited use tokens
2015-04-17 11:57:56 -07:00
b65e1b3e22
vault: using a constant to make @mitchellh feel better
2015-04-15 17:19:59 -07:00
76b69b2514
vault: thread the display name through
2015-04-15 14:12:34 -07:00
9f7143cf44
vault: expose the current leader
2015-04-14 16:53:40 -07:00
445f64eb39
vault: leader should advertise address
2015-04-14 16:44:48 -07:00
ec8a41d2d2
vault: rename internal variable
2015-04-14 16:11:39 -07:00
2820bec479
vault: testing standby mode
2015-04-14 16:06:58 -07:00
a0e1b90b81
vault: reject operation if standby
2015-04-14 14:09:11 -07:00
d7102e2661
vault: first pass at HA standby mode
2015-04-14 14:06:15 -07:00
255e0fbda4
vault: enable physical cache in core
2015-04-14 11:08:04 -07:00
512b3d7afd
vault: Adding metrics profiling
2015-04-08 16:43:17 -07:00
466c7575d3
Replace VaultID with LeaseID for terminology simplification
2015-04-08 13:35:32 -07:00
eaa483ff87
vault: Enforce default and max length leasing
2015-04-03 15:42:34 -07:00
eec6c27fae
vault: Special case auth/token/create
2015-04-02 18:05:23 -07:00
c6479642e9
vault: integrate login with expiration manager
2015-04-02 17:52:11 -07:00
4138e43f00
vault: Adding audit trail for login
2015-04-01 14:48:37 -07:00
3d3e18793b
vault: Integrate audit logging with core
2015-04-01 14:33:48 -07:00
b657b74a97
vault: Minor rework for clarity
2015-04-01 14:11:26 -07:00
c83f46606b
vault: Simpify token checking logic
2015-04-01 14:03:17 -07:00
2c9ebecda7
vault: register zero lease entries with the expiration manager
...
/cc @armon - would appreciate a review on this one
2015-03-31 21:01:12 -07:00
a6bc60c7d6
vault: Adding AuditBroker and basic tests
2015-03-31 13:22:40 -07:00
0666bda865
vault: require root token for seal
2015-03-31 09:59:02 -07:00
c9acfa17cb
vault: get rid of HangleLogin
2015-03-30 20:26:39 -07:00
69593cde56
remove credential/ lots of tests faililng
2015-03-30 18:07:05 -07:00
042db7798e
vault: Adding basic audit table load/unload
2015-03-27 14:00:38 -07:00
609ac4c562
vault: Allow passing in audit factory methods
2015-03-27 13:45:13 -07:00
20c2375352
vault: Adding ACL enforcement
2015-03-24 11:37:07 -07:00
65ef4f1032
vault: wire tokens into expiration manager
2015-03-23 18:11:15 -07:00
86c9bd9083
vault: Give expiration manager a token store reference
2015-03-23 18:00:14 -07:00
6481ff9e34
vault: Generate a root token when initializing
2015-03-23 17:31:30 -07:00
192dcf7d39
vault: first pass at HandleLogin
2015-03-23 13:56:43 -07:00
879a0501f8
vault: Track the token store in core
2015-03-23 13:41:05 -07:00
c349e97168
vault: clean up VaultID duplications, make secret responses clearer
...
/cc @armon - This is a reasonably major refactor that I think cleans up
a lot of the logic with secrets in responses. The reason for the
refactor is that while implementing Renew/Revoke in logical/framework I
found the existing API to be really awkward to work with.
Primarily, we needed a way to send down internal data for Vault core to
store since not all the data you need to revoke a key is always sent
down to the user (for example the user than AWS key belongs to).
At first, I was doing this manually in logical/framework with
req.Storage, but this is going to be such a common event that I think
its something core should assist with. Additionally, I think the added
context for secrets will be useful in the future when we have a Vault
API for returning orphaned out keys: we can also return the internal
data that might help an operator.
So this leads me to this refactor. I've removed most of the fields in
`logical.Response` and replaced it with a single `*Secret` pointer. If
this is non-nil, then the response represents a secret. The Secret
struct encapsulates all the lease info and such.
It also has some fields on it that are only populated at _request_ time
for Revoke/Renew operations. There is precedent for this sort of
behavior in the Go stdlib where http.Request/http.Response have fields
that differ based on client/server. I copied this style.
All core unit tests pass. The APIs fail for obvious reasons but I'll fix
that up in the next commit.
2015-03-19 23:11:42 +01:00
d88a41944e
vault: Switch AuthTable to using MountTable
2015-03-19 09:54:57 -07:00
8cc88981d6
vault: token store is a credential implementation
2015-03-18 19:11:52 -07:00
b8da9c2ee2
vault: first pass at initializing credential backends
2015-03-18 15:46:07 -07:00
d2d1822931
vault: Adding hooks for auth loading
2015-03-18 15:30:31 -07:00
21b9bdaf37
vault: Allow passing in credential backends
2015-03-18 15:21:41 -07:00
6e22ca50eb
vault: integrate policy and token store into core
2015-03-18 14:00:42 -07:00
e078b957d4
vault: start/stop rollback manager post/pre seal
2015-03-17 20:39:45 -05:00
abe0859aa5
vault: use RWMutex on MountTable itself
2015-03-17 20:39:45 -05:00
15b7dc2d02
vault: integration expiration manager with core
2015-03-16 15:28:50 -07:00
9f0d59d03f
vault: system using the framework
2015-03-15 17:35:59 -07:00
d4f54be927
vault: can pass in the backends
2015-03-15 16:25:38 -07:00
d1d1929192
vault: convert to logical.Request and friends
2015-03-15 14:53:41 -07:00
9d84e7bacc
vault: don't copy the key so it can be zeroed, document, add helper
2015-03-14 18:25:55 -07:00
866b91d858
vault: public TestCoreUnsealed, don't modify key in Unseal
...
/cc @armon - I do a key copy within Unseal now. It tripped me up for
quite awhile that that method actually modifies the param in-place and I
can't think of any scenario that is good for the user. Do you see any
issues here?
2015-03-14 17:47:11 -07:00
081358091a
vault: improve seal/unseal log messages
2015-03-13 11:34:40 -07:00
d744d4ee5e
vault: integrate expiration manager with core setup/teardown
2015-03-13 11:20:36 -07:00
d0380e553d
vault: Support a pre-seal teardown
2015-03-13 11:16:24 -07:00
15de847389
vault: Setup expiration manager on unseal
2015-03-12 12:44:30 -07:00
6c759416d0
vault: special view path for system
2015-03-12 12:44:30 -07:00
aa0ca02b8c
vault: sanity check key length
2015-03-12 11:20:38 -07:00
718065c733
vault: the config has to be exported
2015-03-12 10:22:12 -07:00
91462a61a2
vault: Adding mounts table endpoint
2015-03-11 16:12:15 -07:00
b212890043
vault: Setup the mount tables after load
2015-03-11 15:50:42 -07:00
f54e4e0f6a
vault: Loading mount tables on start
2015-03-11 15:19:41 -07:00
fdad9e9ce3
vault: Test routing while sealed
2015-03-11 14:31:55 -07:00
8fdac427a7
vault: Test initialization simple
2015-03-11 11:52:01 -07:00
6794e59e2b
vault: First pass at Unseal
2015-03-11 11:43:36 -07:00
8c49152c78
vault: Support secret sharing
2015-03-11 11:34:08 -07:00
53b4e3281a
vault: First pass at initialization
2015-03-09 17:45:34 -07:00
da34cbb39a
vault: Adding core skeleton
2015-03-09 16:33:27 -07:00
Jeff Mitchell