459 lines
23 KiB
Markdown
459 lines
23 KiB
Markdown
## 0.4.1 (UNRELEASED)
|
|
|
|
__BACKWARDS INCOMPATIBILITIES:__
|
|
* telemetry: Operators will have to explicitly opt-in for Nomad client to
|
|
publish allocation and node metrics
|
|
|
|
IMPROVEMENTS:
|
|
* core: Allow count 0 on system jobs [GH-1421]
|
|
* core: Summarize the current status of registered jobs. [GH-1383, GH-1517]
|
|
* core: Gracefully handle short lived outages by holding RPC calls [GH-1403]
|
|
* core: Introduce a lost state for allocations that were on Nodes that died
|
|
[GH-1516]
|
|
* api: client Logs endpoint for streaming task logs [GH-1444]
|
|
* api/cli: Support for tailing/streaming files [GH-1404, GH-1420]
|
|
* api/server: Support for querying job summaries [GH-1455]
|
|
* cli: `nomad logs` command for streaming task logs [GH-1444]
|
|
* cli: `nomad plan` exit code indicates if changes will occur [GH-1502]
|
|
* cli: status commands support JSON output and go template formating [GH-1503]
|
|
* cli: Validate and plan command supports reading from stdin [GH-1460,
|
|
GH-1458]
|
|
* cli: `nomad node-status` shows volume name for non-physical volumes instead
|
|
of showing 0B used [GH-1538]
|
|
* client: Add killing event to task state [GH-1457]
|
|
* client: Fingerprint network speed on Windows [GH-1443]
|
|
* driver/docker: Allow working directory to be configured [GH-1513]
|
|
* driver/docker: Remove docker volumes when removing container [GH-1519]
|
|
* driver/docker: Set windows containers network mode to nat by default
|
|
[GH-1521]
|
|
* driver/exec: Allow chroot environment to be configurable [GH-1518]
|
|
* telemetry: Circonus integration for telemetry metrics [GH-1459]
|
|
* telemetry: Allow operators to opt-in for publishing metrics [GH-1501]
|
|
|
|
BUG FIXES:
|
|
* agent: Reload agent configuration on SIGHUP [GH-1566]
|
|
* core: Sanitize empty slices/maps in jobs to avoid incorrect create/destroy
|
|
updates [GH-1434]
|
|
* core: Fix race in which a Node registers and doesn't receive system jobs
|
|
[GH-1456]
|
|
* core: Fix issue in which Nodes with large amount of reserved ports would
|
|
casue dynamic port allocations to fail [GH-1526]
|
|
* core: Fix a condition in which old batch allocations could get updated even
|
|
after terminal. In a rare case this could cause a server panic [GH-1471]
|
|
* core: Do not update the Job attached to Allocations that have been marked
|
|
terminal [GH-1508]
|
|
* agent: Fix advertise address when using IPv6 [GH-1465]
|
|
* cli: Fix node-status when using IPv6 advertise address [GH-1465]
|
|
* client: Task start errors adhere to restart policy mode [GH-1405]
|
|
* client: Killing an allocation doesn't cause allocation stats to block
|
|
[GH-1454]
|
|
* driver/docker: Disable swap on docker driver [GH-1480]
|
|
* driver/docker: Fix improper gating on priviledged mode [GH-1506]
|
|
* driver/docker: Default network type is "nat" on Windows [GH-1521]
|
|
* driver/docker: Cleanup created volume when destroying container [GH-1519]
|
|
* driver/rkt: Validate the command and trust_prefix configs [GH-1493]
|
|
* plan: Plan on system jobs discounts nodes that do not meet required
|
|
constraints [GH-1568]
|
|
|
|
## 0.4.0
|
|
|
|
__BACKWARDS INCOMPATIBILITIES:__
|
|
* api: Tasks are no longer allowed to have slashes in their name [GH-1210]
|
|
* cli: Remove the eval-monitor command. Users should switch to `nomad
|
|
eval-status -monitor`.
|
|
* config: Consul configuration has been moved from client options map to
|
|
consul block under client configuration
|
|
* driver/docker: Enabled SSL by default for pulling images from docker
|
|
registries. [GH-1336]
|
|
|
|
IMPROVEMENTS:
|
|
* core: Scheduler reuses blocked evaluations to avoid unbounded creation of
|
|
evaluations under high contention [GH-1199]
|
|
* core: Scheduler stores placement failures in evaluations, no longer
|
|
generating failed allocations for debug information [GH-1188]
|
|
* api: Faster JSON response encoding [GH-1182]
|
|
* api: Gzip compress HTTP API requests [GH-1203]
|
|
* api: Plan api introduced for the Job endpoint [GH-1168]
|
|
* api: Job endpoint can enforce Job Modify Index to ensure job is being
|
|
modified from a known state [GH-1243]
|
|
* api/client: Add resource usage APIs for retrieving tasks/allocations/host
|
|
resource usage [GH-1189]
|
|
* cli: Faster when displaying large amounts ouptuts [GH-1362]
|
|
* cli: Deprecate `eval-monitor` and introduce `eval-status` [GH-1206]
|
|
* cli: Unify the `fs` family of commands to be a single command [GH-1150]
|
|
* cli: Introduce `nomad plan` to dry-run a job through the scheduler and
|
|
determine its effects [GH-1181]
|
|
* cli: node-status command displays host resource usage and allocation
|
|
resources [GH-1261]
|
|
* cli: Region flag and environment variable introduced to set region
|
|
forwarding. Automatic region forwarding for run and plan [GH-1237]
|
|
* client: If Consul is available, automatically bootstrap Nomad Client
|
|
using the `_nomad` service in Consul. Nomad Servers now register
|
|
themselves with Consul to make this possible. [GH-1201]
|
|
* drivers: Qemu and Java can be run without an artifact being download. Useful
|
|
if the artifact exists inside a chrooted directory [GH-1262]
|
|
* driver/docker: Added a client options to set SELinux labels for container
|
|
bind mounts. [GH-788]
|
|
* driver/docker: Enabled SSL by default for pulling images from docker
|
|
registries. [GH-1336]
|
|
* server: If Consul is available, automatically bootstrap Nomad Servers
|
|
using the `_nomad` service in Consul. [GH-1276]
|
|
|
|
BUG FIXES:
|
|
* core: Improve garbage collection of allocations and nodes [GH-1256]
|
|
* core: Fix a potential deadlock if establishing leadership fails and is
|
|
retried [GH-1231]
|
|
* core: Do not restart successful batch jobs when the node is removed/drained
|
|
[GH-1205]
|
|
* core: Fix an issue in which the scheduler could be invoked with insufficient
|
|
state [GH-1339]
|
|
* core: Updated User, Meta or Resources in a task cause create/destroy updates
|
|
[GH-1128, GH-1153]
|
|
* core: Fix blocked evaluations being run without properly accounting for
|
|
priority [GH-1183]
|
|
* api: Tasks are no longer allowed to have slashes in their name [GH-1210]
|
|
* client: Delete tmp files used to communicate with execcutor [GH-1241]
|
|
* client: Prevent the client from restoring with incorrect task state [GH-1294]
|
|
* discovery: Ensure service and check names are unique [GH-1143, GH-1144]
|
|
* driver/docker: Ensure docker client doesn't time out after a minute.
|
|
[GH-1184]
|
|
* driver/java: Fix issue in which Java on darwin attempted to chroot [GH-1262]
|
|
* driver/docker: Fix issue in which logs could be spliced [GH-1322]
|
|
|
|
## 0.3.2 (April 22, 2016)
|
|
|
|
IMPROVEMENTS:
|
|
* core: Garbage collection partitioned to avoid system delays [GH-1012]
|
|
* core: Allow count zero task groups to enable blue/green deploys [GH-931]
|
|
* core: Validate driver configurations when submitting jobs [GH-1062, GH-1089]
|
|
* core: Job Deregister forces an evaluation for the job even if it doesn't
|
|
exist [GH-981]
|
|
* core: Rename successfully finished allocations to "Complete" rather than
|
|
"Dead" for clarity [GH-975]
|
|
* cli: `alloc-status` explains restart decisions [GH-984]
|
|
* cli: `node-drain -self` drains the local node [GH-1068]
|
|
* cli: `node-status -self` queries the local node [GH-1004]
|
|
* cli: Destructive commands now require confirmation [GH-983]
|
|
* cli: `alloc-status` display is less verbose by default [GH-946]
|
|
* cli: `server-members` displays the current leader in each region [GH-935]
|
|
* cli: `run` has an `-output` flag to emit a JSON version of the job [GH-990]
|
|
* cli: New `inspect` command to display a submitted job's specification
|
|
[GH-952]
|
|
* cli: `node-status` display is less verbose by default and shows a node's
|
|
total resources [GH-946]
|
|
* client: `artifact` source can be interpreted [GH-1070]
|
|
* client: Add IP and Port environment variables [GH-1099]
|
|
* client: Nomad fingerprinter to detect client's version [GH-965]
|
|
* client: Tasks can interpret Meta set in the task group and job [GH-985]
|
|
* client: All tasks in a task group are killed when a task fails [GH-962]
|
|
* client: Pass environment variables from host to exec based tasks [GH-970]
|
|
* client: Allow task's to be run as particular user [GH-950, GH-978]
|
|
* client: `artifact` block now supports downloading paths relative to the
|
|
task's directory [GH-944]
|
|
* docker: Timeout communications with Docker Daemon to avoid deadlocks with
|
|
misbehaving Docker Daemon [GH-1117]
|
|
* discovery: Support script based health checks [GH-986]
|
|
* discovery: Allowing registration of services which don't expose ports
|
|
[GH-1092]
|
|
* driver/docker: Support for `tty` and `interactive` options [GH-1059]
|
|
* jobspec: Improved validation of services referencing port labels [GH-1097]
|
|
* periodic: Periodic jobs are always evaluated in UTC timezone [GH-1074]
|
|
|
|
BUG FIXES:
|
|
* core: Prevent garbage collection of running batch jobs [GH-989]
|
|
* core: Trigger System scheduler when Node drain is disabled [GH-1106]
|
|
* core: Fix issue where in-place updated allocation double counted resources
|
|
[GH-957]
|
|
* core: Fix drained, batched allocations from being migrated indefinitely
|
|
[GH-1086]
|
|
* client: Garbage collect Docker containers on exit [GH-1071]
|
|
* client: Fix common exec failures on CentOS and Amazon Linux [GH-1009]
|
|
* client: Fix S3 artifact downloading with IAM credentials [GH-1113]
|
|
* client: Fix handling of environment variables containing multiple equal
|
|
signs [GH-1115]
|
|
|
|
## 0.3.1 (March 16, 2016)
|
|
|
|
__BACKWARDS INCOMPATIBILITIES:__
|
|
* Service names that dont conform to RFC-1123 and RFC-2782 will fail
|
|
validation. To fix, change service name to conform to the RFCs before
|
|
running the job [GH-915]
|
|
* Jobs that downloaded artifacts will have to be updated to the new syntax and
|
|
be resubmitted. The new syntax consolidates artifacts to the `task` rather
|
|
than being duplicated inside each driver config [GH-921]
|
|
|
|
IMPROVEMENTS:
|
|
* cli: Validate job file schemas [GH-900]
|
|
* client: Add environment variables for task name, allocation ID/Name/Index
|
|
[GH-869, GH-896]
|
|
* client: Starting task is retried under the restart policy if the error is
|
|
recoverable [GH-859]
|
|
* client: Allow tasks to download artifacts, which can be archives, prior to
|
|
starting [GH-921]
|
|
* config: Validate Nomad configuration files [GH-910]
|
|
* config: Client config allows reserving resources [GH-910]
|
|
* driver/docker: Support for ECR [GH-858]
|
|
* driver/docker: Periodic Fingerprinting [GH-893]
|
|
* driver/docker: Preventing port reservation for log collection on Unix platforms [GH-897]
|
|
* driver/rkt: Pass DNS information to rkt driver [GH-892]
|
|
* jobspec: Require RFC-1123 and RFC-2782 valid service names [GH-915]
|
|
|
|
BUG FIXES:
|
|
* core: No longer cancel evaluations that are delayed in the plan queue
|
|
[GH-884]
|
|
* api: Guard client/fs/ APIs from being accessed on a non-client node [GH-890]
|
|
* client: Allow dashes in variable names during interprelation [GH-857]
|
|
* client: Updating kill timeout adheres to operator specified maximum value [GH-878]
|
|
* client: Fix a case in which clients would pull but not run allocations
|
|
[GH-906]
|
|
* consul: Remove concurrent map access [GH-874]
|
|
* driver/exec: Stopping tasks with more than one pid in a cgroup [GH-855]
|
|
* executor/linux: Add /run/resolvconf/ to chroot so DNS works [GH-905]
|
|
|
|
## 0.3.0 (February 25, 2016)
|
|
|
|
__BACKWARDS INCOMPATIBILITIES:__
|
|
* Stdout and Stderr log files of tasks have moved from task/local to
|
|
alloc/logs [GH-851]
|
|
* Any users of the runtime environment variable `$NOMAD_PORT_` will need to
|
|
update to the new `${NOMAD_ADDR_}` varriable [GH-704]
|
|
* Service names that include periods will fail validation. To fix, remove any
|
|
periods from the service name before running the job [GH-770]
|
|
* Task resources are now validated and enforce minimum resources. If a job
|
|
specifies resources below the minimum they will need to be updated [GH-739]
|
|
* Node ID is no longer specifiable. For users who have set a custom Node
|
|
ID, the node should be drained before Nomad is updated and the data_dir
|
|
should be deleted before starting for the first time [GH-675]
|
|
* Users of custom restart policies should update to the new syntax which adds
|
|
a `mode` field. The `mode` can be either `fail` or `delay`. The default for
|
|
`batch` and `service` jobs is `fail` and `delay` respectively [GH-594]
|
|
* All jobs that interpret variables in constraints or driver configurations
|
|
will need to be updated to the new syntax which wraps the interpreted
|
|
variable in curly braces. (`$node.class` becomes `${node.class}`) [GH-760]
|
|
|
|
IMPROVEMENTS:
|
|
* core: Populate job status [GH-663]
|
|
* core: Cgroup fingerprinter [GH-712]
|
|
* core: Node class constraint [GH-618]
|
|
* core: User specifiable kill timeout [GH-624]
|
|
* core: Job queueing via blocked evaluations [GH-726]
|
|
* core: Only reschedule failed batch allocations [GH-746]
|
|
* core: Add available nodes by DC to AllocMetrics [GH-619]
|
|
* core: Improve scheduler retry logic under contention [GH-787]
|
|
* core: Computed node class and stack optimization [GH-691, GH-708]
|
|
* core: Improved restart policy with more user configuration [GH-594]
|
|
* core: Periodic specification for jobs [GH-540, GH-657, GH-659, GH-668]
|
|
* core: Batch jobs are garbage collected from the Nomad Servers [GH-586]
|
|
* core: Free half the CPUs on leader node for use in plan queue and evaluation
|
|
broker [GH-812]
|
|
* core: Seed random number generator used to randomize node traversal order
|
|
during scheduling [GH-808]
|
|
* core: Performance improvements [GH-823, GH-825, GH-827, GH-830, GH-832,
|
|
GH-833, GH-834, GH-839]
|
|
* core/api: System garbage collection endpoint [GH-828]
|
|
* core/api: Allow users to set arbitrary headers via agent config [GH-699]
|
|
* core/cli: Prefix based lookups of allocs/nodes/evals/jobs [GH-575]
|
|
* core/cli: Print short identifiers and UX cleanup [GH-675, GH-693, GH-692]
|
|
* core/client: Client pulls minimum set of required allocations [GH-731]
|
|
* cli: Output of agent-info is sorted [GH-617]
|
|
* cli: Eval monitor detects zero wait condition [GH-776]
|
|
* cli: Ability to navigate allocation directories [GH-709, GH-798]
|
|
* client: Batch allocation updates to the server [GH-835]
|
|
* client: Log rotation for all drivers [GH-685, GH-763, GH-819]
|
|
* client: Only download artifacts from http, https, and S3 [GH-841]
|
|
* client: Create a tmp/ directory inside each task directory [GH-757]
|
|
* client: Store when an allocation was received by the client [GH-821]
|
|
* client: Heartbeating and saving state resilient under high load [GH-811]
|
|
* client: Handle updates to tasks Restart Policy and KillTimeout [GH-751]
|
|
* client: Killing a driver handle is retried with an exponential backoff
|
|
[GH-809]
|
|
* client: Send Node to server when periodic fingerprinters change Node
|
|
attributes/metadata [GH-749]
|
|
* client/api: File-system access to allocation directories [GH-669]
|
|
* drivers: Validate the "command" field contains a single value [GH-842]
|
|
* drivers: Interpret Nomad variables in environment variables/args [GH-653]
|
|
* driver/rkt: Add support for CPU/Memory isolation [GH-610]
|
|
* driver/rkt: Add support for mounting alloc/task directory [GH-645]
|
|
* driver/docker: Support for .dockercfg based auth for private registries
|
|
[GH-773]
|
|
|
|
BUG FIXES:
|
|
* core: Node drain could only be partially applied [GH-750]
|
|
* core: Fix panic when eval Ack occurs at delivery limit [GH-790]
|
|
* cli: Handle parsing of un-named ports [GH-604]
|
|
* cli: Enforce absolute paths for data directories [GH-622]
|
|
* client: Cleanup of the allocation directory [GH-755]
|
|
* client: Improved stability under high contention [GH-789]
|
|
* client: Handle non-200 codes when parsing AWS metadata [GH-614]
|
|
* client: Unmounted of shared alloc dir when client is rebooted [GH-755]
|
|
* client/consul: Service name changes handled properly [GH-766]
|
|
* driver/rkt: handle broader format of rkt version outputs [GH-745]
|
|
* driver/qemu: failed to load image and kvm accelerator fixes [GH-656]
|
|
|
|
## 0.2.3 (December 17, 2015)
|
|
|
|
BUG FIXES:
|
|
* core: Task States not being properly updated [GH-600]
|
|
* client: Fixes for user lookup to support CoreOS [GH-591]
|
|
* discovery: Using a random prefix for nomad managed services [GH-579]
|
|
* discovery: De-Registering Tasks while Nomad sleeps before failed tasks are
|
|
restarted.
|
|
* discovery: Fixes for service registration when multiple allocations are bin
|
|
packed on a node [GH-583]
|
|
* configuration: Sort configuration files [GH-588]
|
|
* cli: RetryInterval was not being applied properly [GH-601]
|
|
|
|
## 0.2.2 (December 11, 2015)
|
|
|
|
IMPROVEMENTS:
|
|
* core: Enable `raw_exec` driver in dev mode [GH-558]
|
|
* cli: Server join/retry-join command line and config options [GH-527]
|
|
* cli: Nomad reports which config files are loaded at start time, or if none
|
|
are loaded [GH-536], [GH-553]
|
|
|
|
BUG FIXES:
|
|
* core: Send syslog to `LOCAL0` by default as previously documented [GH-547]
|
|
* client: remove all calls to default logger [GH-570]
|
|
* consul: Nomad is less noisy when Consul is not running [GH-567]
|
|
* consul: Nomad only deregisters services that it created [GH-568]
|
|
* driver/exec: Shutdown a task now sends the interrupt signal first to the
|
|
process before forcefully killing it. [GH-543]
|
|
* driver/docker: Docker driver no longer leaks unix domain socket connections
|
|
[GH-556]
|
|
* fingerprint/network: Now correctly detects interfaces on Windows [GH-382]
|
|
|
|
## 0.2.1 (November 28, 2015)
|
|
|
|
IMPROVEMENTS:
|
|
|
|
* core: Can specify a whitelist for activating drivers [GH-467]
|
|
* core: Can specify a whitelist for activating fingerprinters [GH-488]
|
|
* core/api: Can list all known regions in the cluster [GH-495]
|
|
* client/spawn: spawn package tests made portable (work on Windows) [GH-442]
|
|
* client/executor: executor package tests made portable (work on Windows) [GH-497]
|
|
* client/driver: driver package tests made portable (work on windows) [GH-502]
|
|
* client/discovery: Added more consul client api configuration options [GH-503]
|
|
* driver/docker: Added TLS client options to the config file [GH-480]
|
|
* jobspec: More flexibility in naming Services [GH-509]
|
|
|
|
BUG FIXES:
|
|
|
|
* core: Shared reference to DynamicPorts caused port conflicts when scheduling
|
|
count > 1 [GH-494]
|
|
* client/restart policy: Not restarting Batch Jobs if the exit code is 0 [GH-491]
|
|
* client/service discovery: Make Service IDs unique [GH-479]
|
|
* client/service: Fixes update to check definitions and services which are already registered [GH-498]
|
|
* driver/docker: Expose the container port instead of the host port [GH-466]
|
|
* driver/docker: Support `port_map` for static ports [GH-476]
|
|
* driver/docker: Pass 0.2.0-style port environment variables to the docker container [GH-476]
|
|
* jobspec: distinct_hosts constraint can be specified as a boolean (previously panicked) [GH-501]
|
|
|
|
## 0.2.0 (November 18, 2015)
|
|
|
|
__BACKWARDS INCOMPATIBILITIES:__
|
|
|
|
* core: HTTP API `/v1/node/<id>/allocations` returns full Allocation and not
|
|
stub [GH-402]
|
|
* core: Removed weight and hard/soft fields in constraints [GH-351]
|
|
* drivers: Qemu and Java driver configurations have been updated to both use
|
|
`artifact_source` as the source for external images/jars to be ran
|
|
* jobspec: New reserved and dynamic port specification [GH-415]
|
|
* jobspec/drivers: Driver configuration supports arbitrary struct to be
|
|
passed in jobspec [GH-415]
|
|
|
|
FEATURES:
|
|
|
|
* core: Blocking queries supported in API [GH-366]
|
|
* core: System Scheduler that runs tasks on every node [GH-287]
|
|
* core: Regexp, version and lexical ordering constraints [GH-271]
|
|
* core: distinctHost constraint ensures Task Groups are running on distinct
|
|
clients [GH-321]
|
|
* core: Service block definition with Consul registration [GH-463, GH-460,
|
|
GH-458, GH-455, GH-446, GH-425]
|
|
* client: GCE Fingerprinting [GH-215]
|
|
* client: Restart policy for task groups enforced by the client [GH-369,
|
|
GH-393]
|
|
* driver/rawexec: Raw Fork/Exec Driver [GH-237]
|
|
* driver/rkt: Experimental Rkt Driver [GH-165, GH-247]
|
|
* drivers: Add support for downloading external artifacts to execute for
|
|
Exec, Raw exec drivers [GH-381]
|
|
|
|
IMPROVEMENTS:
|
|
|
|
* core: Configurable Node GC threshold [GH-362]
|
|
* core: Overlap plan verification and plan application for increased
|
|
throughput [GH-272]
|
|
* cli: Output of `alloc-status` also displays task state [GH-424]
|
|
* cli: Output of `server-members` is sorted [GH-323]
|
|
* cli: Show node attributes in `node-status` [GH-313]
|
|
* client/fingerprint: Network fingerprinter detects interface suitable for
|
|
use, rather than defaulting to eth0 [GH-334, GH-356]
|
|
* client: Client Restore State properly reattaches to tasks and recreates
|
|
them as needed [GH-364, GH-380, GH-388, GH-392, GH-394, GH-397, GH-408]
|
|
* client: Periodic Fingerprinting [GH-391]
|
|
* client: Precise snapshotting of TaskRunner and AllocRunner [GH-403, GH-411]
|
|
* client: Task State is tracked by client [GH-416]
|
|
* client: Test Skip Detection [GH-221]
|
|
* driver/docker: Can now specify auth for docker pull [GH-390]
|
|
* driver/docker: Can now specify DNS and DNSSearch options [GH-390]
|
|
* driver/docker: Can now specify the container's hostname [GH-426]
|
|
* driver/docker: Containers now have names based on the task name. [GH-389]
|
|
* driver/docker: Mount task local and alloc directory to docker containers [GH-290]
|
|
* driver/docker: Now accepts any value for `network_mode` to support userspace networking plugins in docker 1.9
|
|
* driver/java: Pass JVM options in java driver [GH-293, GH-297]
|
|
* drivers: Use BlkioWeight rather than BlkioThrottleReadIopsDevice [GH-222]
|
|
* jobspec and drivers: Driver configuration supports arbitrary struct to be passed in jobspec [GH-415]
|
|
|
|
BUG FIXES:
|
|
|
|
* core: Nomad Client/Server RPC codec encodes strings properly [GH-420]
|
|
* core: Reset Nack timer in response to scheduler operations [GH-325]
|
|
* core: Scheduler checks for updates to environment variables [GH-327]
|
|
* cli: Fix crash when -config was given a directory or empty path [GH-119]
|
|
* client/fingerprint: Use correct local interface on OS X [GH-361, GH-365]
|
|
* client: Nomad Client doesn't restart failed containers [GH-198]
|
|
* client: Reap spawn-daemon process, avoiding a zombie process [GH-240]
|
|
* client: Resource exhausted errors because of link-speed zero [GH-146,
|
|
GH-205]
|
|
* client: Restarting Nomad Client leads to orphaned containers [GH-159]
|
|
* driver/docker: Apply SELinux label for mounting directories in docker
|
|
[GH-377]
|
|
* driver/docker: Docker driver exposes ports when creating container [GH-212,
|
|
GH-412]
|
|
* driver/docker: Docker driver uses docker environment variables correctly
|
|
[GH-407]
|
|
* driver/qemu: Qemu fingerprint and tests work on both windows/linux [GH-352]
|
|
|
|
## 0.1.2 (October 6, 2015)
|
|
|
|
IMPROVEMENTS:
|
|
|
|
* client: Nomad client cleans allocations on exit when in dev mode [GH-214]
|
|
* drivers: Use go-getter for artifact retrieval, add artifact support to
|
|
Exec, Raw Exec drivers [GH-288]
|
|
|
|
## 0.1.1 (October 5, 2015)
|
|
|
|
IMPROVEMENTS:
|
|
|
|
* cli: Nomad Client configurable from command-line [GH-191]
|
|
* client/fingerprint: Native IP detection and user specifiable network
|
|
interface for fingerprinting [GH-189]
|
|
* driver/docker: Docker networking mode is configurable [GH-184]
|
|
* drivers: Set task environment variables [GH-206]
|
|
|
|
BUG FIXES:
|
|
|
|
* client/fingerprint: Network fingerprinting failed if default network
|
|
interface did not exist [GH-189]
|
|
* client: Fixed issue where network resources throughput would be set to 0
|
|
MBits if the link speed could not be determined [GH-205]
|
|
* client: Improved detection of Nomad binary [GH-181]
|
|
* driver/docker: Docker dynamic port mapping were not being set properly
|
|
[GH-199]
|
|
|
|
## 0.1.0 (September 28, 2015)
|
|
|
|
* Initial release
|
|
|