open-nomad/vendor/github.com/hashicorp/go-connlimit/connlimit.go

package connlimit

import (
	"errors"
	"fmt"
	"net"
	"net/http"
	"sync"
	"sync/atomic"
	"time"
)

var (
	// ErrPerClientIPLimitReached is returned if accepting a new conn would exceed
	// the per-client-ip limit set.
	ErrPerClientIPLimitReached = errors.New("client connection limit reached")
	tooManyConnsMsg            = "Your IP is issuing too many concurrent connections, please rate limit your calls\n"
	tooManyRequestsResponse    = []byte(fmt.Sprintf("HTTP/1.1 429 Too Many Requests\r\n"+
		"Content-Type: text/plain\r\n"+
		"Content-Length: %d\r\n"+
		"Connection: close\r\n\r\n%s", len(tooManyConnsMsg), tooManyConnsMsg))
)

// Limiter implements a simple limiter that tracks the number of connections
// from each client IP. It may be used in it's zero value although no limits
// will be configured initially - they can be set later with SetConfig.
type Limiter struct {
	// cs stores the map of active connections by IP address. We store a set of
	// conn pointers not just a counter because http.Server.ConnState hook only
	// gives us a connection object between calls so we need to know if a closed
	// conn is one that was previously accepted or one we've just closed in the
	// ConnState hook because the client has hit its limit.
	cs map[string]map[net.Conn]struct{}

	// l protects access to cs
	l sync.Mutex

	// cfg is stored atomically to provide non-blocking reads via Config. This
	// might be important if this is called regularly in a health or metrics
	// endpoint and shouldn't block new connections being established.
	cfg atomic.Value
}

// Config is the configuration for the limiter.
type Config struct {
	// MaxConnsPerClientIP limits how many concurrent connections are allowed from
	// a given client IP. The IP is the one reported by the connection so cannot
	// be relied upon if clients are connecting through multiple proxies or able
	// to spoof their source IP address in some way. Similarly, multiple clients
	// connected via a proxy or NAT gateway or similar will all be seen as coming
	// from the same IP and so limited as one client.
	MaxConnsPerClientIP int
}

// NewLimiter returns a limiter with the specified config.
func NewLimiter(cfg Config) *Limiter {
	l := &Limiter{}
	l.SetConfig(cfg)
	return l
}

// Accept is called as early as possible when handling a new conn. If the
// connection should be accepted according to the Limiter's Config, it will
// return a free func and nil error. The free func must be called when the
// connection is no longer being handled - typically in a defer statement in the
// main connection handling goroutine, this will decrement the counter for that
// client IP. If the configured limit has been reached, a no-op func is returned
// (doesn't need to be called), and ErrPerClientIPLimitReached is returned.
//
// If any other error is returned it signifies something wrong with the config
// or transient failure to read or parse the remote IP. The free func will be a
// no-op in this case and need not be called.
func (l *Limiter) Accept(conn net.Conn) (func(), error) {
	addrKey := connKey(conn)

	// Load config outside locked section since it's not updated under lock anyway
	// and the atomic Load might be slower/contented so better to do outside lock.
	cfg := l.Config()

	l.l.Lock()
	defer l.l.Unlock()

	if l.cs == nil {
		l.cs = make(map[string]map[net.Conn]struct{})
	}

	cs := l.cs[addrKey]
	if cs == nil {
		cs = make(map[net.Conn]struct{})
		l.cs[addrKey] = cs
	}

	n := len(cs)

	// Might be greater since config is dynamic.
	if cfg.MaxConnsPerClientIP > 0 && n >= cfg.MaxConnsPerClientIP {
		return func() {}, ErrPerClientIPLimitReached
	}

	// Add the conn to the map
	cs[conn] = struct{}{}

	// Create a free func over the address key we used
	free := func() {
		l.freeConn(conn)
	}

	return free, nil
}

func (l *Limiter) NumOpen(addr net.Addr) int {
	addrKey := addrKey(addr)

	l.l.Lock()
	defer l.l.Unlock()

	if l.cs == nil {
		return 0
	}

	cs := l.cs[addrKey]
	if cs == nil {
		return 0
	}

	return len(cs)
}

func connKey(conn net.Conn) string {
	return addrKey(conn.RemoteAddr())
}

func addrKey(addr net.Addr) string {
	switch a := addr.(type) {
	case *net.TCPAddr:
		return "ip:" + a.IP.String()
	case *net.UDPAddr:
		return "ip:" + a.IP.String()
	case *net.IPAddr:
		return "ip:" + a.IP.String()
	default:
		// not sure what to do with this, just assume whole Addr is relevant?
		return addr.Network() + "/" + addr.String()
	}
}

// freeConn removes a connection from the map if it's present. It is a no-op if
// the conn was never accepted by Accept.
func (l *Limiter) freeConn(conn net.Conn) {
	addrKey := connKey(conn)

	l.l.Lock()
	defer l.l.Unlock()

	cs, ok := l.cs[addrKey]
	if !ok {
		return
	}

	delete(cs, conn)
	if len(cs) == 0 {
		delete(l.cs, addrKey)
	}
}

// Config returns the current limiter configuration. It is safe to call from any
// goroutine and does not block new connections being accepted.
func (l *Limiter) Config() Config {
	cfgRaw := l.cfg.Load()
	if cfg, ok := cfgRaw.(Config); ok {
		return cfg
	}
	return Config{}
}

// SetConfig dynamically updates the limiter configuration. It is safe to call
// from any goroutine. Note that if the limit is lowered, active conns will not
// be closed and may remain over the limit until they close naturally.
func (l *Limiter) SetConfig(c Config) {
	l.cfg.Store(c)
}

// HTTPConnStateFuncWithErrorHandler returns a func that can be passed as the ConnState field of
// an http.Server. This intercepts new HTTP connections to the server and
// applies the limiting to new connections.
//
// Note that if the conn is hijacked from the HTTP server then it will be freed
// in the limiter as if it was closed. Servers that use Hijacking must implement
// their own calls if they need to continue limiting the number of concurrent
// hijacked connections.
// errorHandler MUST close the connection itself
func (l *Limiter) HTTPConnStateFuncWithErrorHandler(errorHandler func(error, net.Conn)) func(net.Conn, http.ConnState) {

	return func(conn net.Conn, state http.ConnState) {
		switch state {
		case http.StateNew:
			_, err := l.Accept(conn)
			if err != nil {
				errorHandler(err, conn)
			}
		case http.StateHijacked:
			l.freeConn(conn)
		case http.StateClosed:
			// Maybe free the conn. This might be a conn we closed in the case above
			// that was never counted as it was over limit but freeConn will be a
			// no-op in that case.
			l.freeConn(conn)
		}
	}
}

// HTTPConnStateFunc is here for ascending compatibility reasons.
func (l *Limiter) HTTPConnStateFunc() func(net.Conn, http.ConnState) {
	return l.HTTPConnStateFuncWithErrorHandler(func(err error, conn net.Conn) {
		conn.Close()
	})
}

// HTTPConnStateFuncWithDefault429Handler return an HTTP 429 if too many connections occur.
// BEWARE that returning HTTP 429 is done on critical path, you might choose to use
// HTTPConnStateFuncWithErrorHandler if you want to use a non-blocking strategy.
func (l *Limiter) HTTPConnStateFuncWithDefault429Handler(writeDeadlineMaxDelay time.Duration) func(net.Conn, http.ConnState) {
	return l.HTTPConnStateFuncWithErrorHandler(func(err error, conn net.Conn) {
		if err == ErrPerClientIPLimitReached {
			// We don't care about slow players
			if writeDeadlineMaxDelay > 0 {
				conn.SetDeadline(time.Now().Add(writeDeadlineMaxDelay))
			}
			conn.Write(tooManyRequestsResponse)
		}
		conn.Close()
	})
}