---
layout: docs
page_title: server Stanza - Agent Configuration
sidebar_title: server
description: |-
  The "server" stanza configures the Nomad agent to operate in server mode to
  participate in scheduling decisions, register with service discovery, handle
  join failures, and more.
---

# `server` Stanza

<Placement groups={['server']} />

The `server` stanza configures the Nomad agent to operate in server mode to
participate in scheduling decisions, register with service discovery, handle
join failures, and more.

```hcl
server {
  enabled          = true
  bootstrap_expect = 3
  server_join {
    retry_join = [ "1.1.1.1", "2.2.2.2" ]
    retry_max = 3
    retry_interval = "15s"
  }
}
```

## `server` Parameters

- `authoritative_region` `(string: "")` - Specifies the authoritative region, which
  provides a single source of truth for global configurations such as ACL Policies and
  global ACL tokens. Non-authoritative regions will replicate from the authoritative
  to act as a mirror. By default, the local region is assumed to be authoritative.

- `bootstrap_expect` `(int: required)` - Specifies the number of server nodes to
  wait for before bootstrapping. It is most common to use the odd-numbered
  integers `3` or `5` for this value, depending on the cluster size. A value of
  `1` does not provide any fault tolerance and is not recommended for production
  use cases.

- `data_dir` `(string: "[data_dir]/server")` - Specifies the directory to use -
  for server-specific data, including the replicated log. By default, this is -
  the top-level [data_dir](/docs/configuration#data_dir)
  suffixed with "server", like `"/opt/nomad/server"`. This must be an absolute
  path.

- `enabled` `(bool: false)` - Specifies if this agent should run in server mode.
  All other server options depend on this value being set.

- `enabled_schedulers` `(array<string>: [all])` - Specifies which sub-schedulers
  this server will handle. This can be used to restrict the evaluations that
  worker threads will dequeue for processing.

- `enable_event_broker` `(bool: true)` - Specifies if this server will generate
  events for its event stream.

- `encrypt` `(string: "")` - Specifies the secret key to use for encryption of
  Nomad server's gossip network traffic. This key must be 32 bytes that are
  base64-encoded. The provided key is automatically persisted to the data
  directory and loaded automatically whenever the agent is restarted. This means
  that to encrypt Nomad server's gossip protocol, this option only needs to be
  provided once on each agent's initial startup sequence. If it is provided
  after Nomad has been initialized with an encryption key, then the provided key
  is ignored and a warning will be displayed. See the
  [encryption documentation][encryption] for more details on this option
  and its impact on the cluster.

- `event_buffer_size` `(int: 100)` - Specifies the number of events generated
  by the server to be held in memory. Increasing this value enables new
  subscribers to have a larger look back window when initially subscribing.
  Decreasing will lower the amount of memory used for the event buffer.

- `node_gc_threshold` `(string: "24h")` - Specifies how long a node must be in a
  terminal state before it is garbage collected and purged from the system. This
  is specified using a label suffix like "30s" or "1h".

- `job_gc_interval` `(string: "5m")` - Specifies the interval between the job
  garbage collections. Only jobs who have been terminal for at least
  `job_gc_threshold` will be collected. Lowering the interval will perform more
  frequent but smaller collections. Raising the interval will perform collections
  less frequently but collect more jobs at a time. Reducing this interval is
  useful if there is a large throughput of tasks, leading to a large set of
  dead jobs. This is specified using a label suffix like "30s" or "3m". `job_gc_interval`
  was introduced in Nomad 0.10.0.

- `job_gc_threshold` `(string: "4h")` - Specifies the minimum time a job must be
  in the terminal state before it is eligible for garbage collection. This is
  specified using a label suffix like "30s" or "1h".

- `eval_gc_threshold` `(string: "1h")` - Specifies the minimum time an
  evaluation must be in the terminal state before it is eligible for garbage
  collection. This is specified using a label suffix like "30s" or "1h".

- `deployment_gc_threshold` `(string: "1h")` - Specifies the minimum time a
  deployment must be in the terminal state before it is eligible for garbage
  collection. This is specified using a label suffix like "30s" or "1h".

- `csi_volume_claim_gc_threshold` `(string: "1h")` - Specifies the minimum age of
  a CSI volume before it is eligible to have its claims garbage collected.
  This is specified using a label suffix like "30s" or "1h".

- `csi_plugin_gc_threshold` `(string: "1h")` - Specifies the minimum age of a
  CSI plugin before it is eligible for garbage collection if not in use.
  This is specified using a label suffix like "30s" or "1h".

- `default_scheduler_config` <code>([scheduler_configuration][update-scheduler-config]:
  nil)</code> - Specifies the initial default scheduler config when
  bootstrapping cluster. The parameter is ignored once the cluster is bootstrapped or
  value is updated through the [API endpoint][update-scheduler-config]. See [the
  example section](#configuring-scheduler-config) for more details
  `default_scheduler_config` was introduced in Nomad 0.10.4.

- `heartbeat_grace` `(string: "10s")` - Specifies the additional time given as a
  grace period beyond the heartbeat TTL of nodes to account for network and
  processing delays as well as clock skew. This is specified using a label
  suffix like "30s" or "1h".

- `min_heartbeat_ttl` `(string: "10s")` - Specifies the minimum time between
  node heartbeats. This is used as a floor to prevent excessive updates. This is
  specified using a label suffix like "30s" or "1h". Lowering the minimum TTL is
  a tradeoff as it lowers failure detection time of nodes at the tradeoff of
  false positives and increased load on the leader.

- `max_heartbeats_per_second` `(float: 50.0)` - Specifies the maximum target
  rate of heartbeats being processed per second. This allows the TTL to be
  increased to meet the target rate. Increasing the maximum heartbeats per
  second is a tradeoff as it lowers failure detection time of nodes at the
  tradeoff of false positives and increased load on the leader.

- `non_voting_server` `(bool: false)` - (Enterprise-only) Specifies whether
  this server will act as a non-voting member of the cluster to help provide
  read scalability.

- `num_schedulers` `(int: [num-cores])` - Specifies the number of parallel
  scheduler threads to run. This can be as many as one per core, or `0` to
  disallow this server from making any scheduling decisions. This defaults to
  the number of CPU cores.

- `protocol_version` `(int: 1)` - Specifies the Nomad protocol version to use
  when communicating with other Nomad servers. This value is typically not
  required as the agent internally knows the latest version, but may be useful
  in some upgrade scenarios.

- `raft_protocol` `(int: 2)` - Specifies the Raft protocol version to use when
  communicating with other Nomad servers. This affects available Autopilot
  features and is typically not required as the agent internally knows the
  latest version, but may be useful in some upgrade scenarios.

- `raft_multiplier` `(int: 1)` - An integer multiplier used by Nomad servers to
  scale key Raft timing parameters. Omitting this value or setting it to 0 uses
  default timing described below. Lower values are used to tighten timing and
  increase sensitivity while higher values relax timings and reduce sensitivity.
  Tuning this affects the time it takes Nomad to detect leader failures and to
  perform leader elections, at the expense of requiring more network and CPU
  resources for better performance. The maximum allowed value is 10.

  By default, Nomad will use the highest-performance timing, currently equivalent
  to setting this to a value of 1. Increasing the timings makes leader election
  less likely during periods of networking issues or resource starvation. Since
  leader elections pause Nomad's normal work, it may be beneficial for slow or
  unreliable networks to wait longer before electing a new leader. The tradeoff
  when raising this value is that during network partitions or other events
  (server crash) where a leader is lost, Nomad will not elect a new leader for
  a longer period of time than the default. The [`nomad.nomad.leader.barrier` and
  `nomad.raft.leader.lastContact` metrics](/docs/telemetry/metrics) are a good
  indicator of how often leader elections occur and raft latency.

- `redundancy_zone` `(string: "")` - (Enterprise-only) Specifies the redundancy
  zone that this server will be a part of for Autopilot management. For more
  information, see the [Autopilot Guide](https://learn.hashicorp.com/tutorials/nomad/autopilot).

- `rejoin_after_leave` `(bool: false)` - Specifies if Nomad will ignore a
  previous leave and attempt to rejoin the cluster when starting. By default,
  Nomad treats leave as a permanent intent and does not attempt to join the
  cluster again when starting. This flag allows the previous state to be used to
  rejoin the cluster.

- `server_join` <code>([server_join][server-join]: nil)</code> - Specifies
  how the Nomad server will connect to other Nomad servers. The `retry_join`
  fields may directly specify the server address or use go-discover syntax for
  auto-discovery. See the [server_join documentation][server-join] for more detail.

- `upgrade_version` `(string: "")` - A custom version of the format X.Y.Z to use
  in place of the Nomad version when custom upgrades are enabled in Autopilot.
  For more information, see the [Autopilot Guide](https://learn.hashicorp.com/tutorials/nomad/autopilot).

### Deprecated Parameters

- `retry_join` `(array<string>: [])` - Specifies a list of server addresses to
  retry joining if the first attempt fails. This is similar to
  [`start_join`](#start_join), but only invokes if the initial join attempt
  fails. The list of addresses will be tried in the order specified, until one
  succeeds. After one succeeds, no further addresses will be contacted. This is
  useful for cases where we know the address will become available eventually.
  Use `retry_join` with an array as a replacement for `start_join`, **do not use
  both options**. See the [server_join][server-join]
  section for more information on the format of the string. This field is
  deprecated in favor of the [server_join stanza][server-join].

- `retry_interval` `(string: "30s")` - Specifies the time to wait between retry
  join attempts. This field is deprecated in favor of the [server_join
  stanza][server-join].

- `retry_max` `(int: 0)` - Specifies the maximum number of join attempts to be
  made before exiting with a return code of 1. By default, this is set to 0
  which is interpreted as infinite retries. This field is deprecated in favor of
  the [server_join stanza][server-join].

- `start_join` `(array<string>: [])` - Specifies a list of server addresses to
  join on startup. If Nomad is unable to join with any of the specified
  addresses, agent startup will fail. See the [server address
  format](/docs/configuration/server_join#server-address-format)
  section for more information on the format of the string. This field is
  deprecated in favor of the [server_join stanza][server-join].

## `server` Examples

### Common Setup

This example shows a common Nomad agent `server` configuration stanza. The two
IP addresses could also be DNS, and should point to the other Nomad servers in
the cluster

```hcl
server {
  enabled          = true
  bootstrap_expect = 3

  server_join {
    retry_join     = [ "1.1.1.1", "2.2.2.2" ]
    retry_max      = 3
    retry_interval = "15s"
  }
}
```

### Configuring Data Directory

This example shows configuring a custom data directory for the server data.

```hcl
server {
  data_dir = "/opt/nomad/server"
}
```

### Automatic Bootstrapping

The Nomad servers can automatically bootstrap if Consul is configured. For a
more detailed explanation, please see the
[automatic Nomad bootstrapping documentation](https://learn.hashicorp.com/tutorials/nomad/clustering).

### Restricting Schedulers

This example shows restricting the schedulers that are enabled as well as the
maximum number of cores to utilize when participating in scheduling decisions:

```hcl
server {
  enabled            = true
  enabled_schedulers = ["batch", "service"]
  num_schedulers     = 7
}
```

### Bootstrapping with a Custom Scheduler Config ((#configuring-scheduler-config))

While [bootstrapping a cluster], you can use the `default_scheduler_config` stanza
to prime the cluster with a [`SchedulerConfig`][update-scheduler-config]. The
scheduler configuration determines which scheduling algorithm is configured—
spread scheduling or binpacking—and which job types are eligible for preemption.

~> **Warning:** Once the cluster is bootstrapped, you must configure this using
the [update scheduler configuration][update-scheduler-config] API. This
option is only consulted during bootstrap.

The structure matches the [Update Scheduler Config][update-scheduler-config] API
endpoint, which you should consult for canonical documentation. However, the
attributes names must be adapted to HCL syntax by using snake case
representations rather than camel case.

This example shows configuring spread scheduling and enabling preemption for all
job-type schedulers.

```hcl
server {
  default_scheduler_config {
    scheduler_algorithm = "spread"

    preemption_config {
      batch_scheduler_enabled   = true
      system_scheduler_enabled  = true
      service_scheduler_enabled = true
    }
  }
}
```

[encryption]: https://learn.hashicorp.com/tutorials/nomad/security-gossip-encryption 'Nomad Encryption Overview'
[server-join]: /docs/configuration/server_join 'Server Join'
[update-scheduler-config]: /api-docs/operator#update-scheduler-configuration 'Scheduler Config'
[bootstrapping a cluster]: /docs/faq#bootstrapping