Fix numerous go-getter security issues:
- Add timeouts to http, git, and hg operations to prevent DoS
- Add size limit to http to prevent resource exhaustion
- Disable following symlinks in both artifacts and `job run`
- Stop performing initial HEAD request to avoid file corruption on
retries and DoS opportunities.
**Approach**
Since Nomad has no ability to differentiate a DoS-via-large-artifact vs
a legitimate workload, all of the new limits are configurable at the
client agent level.
The max size of HTTP downloads is also exposed as a node attribute so
that if some workloads have large artifacts they can specify a high
limit in their jobspecs.
In the future all of this plumbing could be extended to enable/disable
specific getters or artifact downloading entirely on a per-node basis.
This PR is 2 fixes for the flaky TestTaskRunner_TaskEnv_Chroot test.
And also the TestTaskRunner_Download_ChrootExec test.
- Use TinyChroot to stop copying gigabytes of junk, which causes GHA
to fail to create the environment in time.
- Pre-create cgroups on V2 systems. Normally the cgroup directory is
managed by the cpuset manager, but that is not active in taskrunner tests,
so create it by hand in the test framework.
This change modifies the template task runner to utilise the
new consul-template which includes Nomad service lookup template
funcs.
In order to provide security and auth to consul-template, we use
a custom HTTP dialer which is passed to consul-template when
setting up the runner. This method follows Vault implementation.
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
Resolves#12095 by WONTFIXing it.
This approach disables `writeToFile` as it allows arbitrary host
filesystem writes and is only a small quality of life improvement over
multiple `template` stanzas.
This approach has the significant downside of leaving people who have
altered their `template.function_denylist` *still vulnerable!* I added
an upgrade note, but we should have implemented the denylist as a
`map[string]bool` so that new funcs could be denied without overriding
custom configurations.
This PR also includes a bug fix that broke enabling all consul-template
funcs. We repeatedly failed to differentiate between a nil (unset)
denylist and an empty (allow all) one.
This PR introduces support for using Nomad on systems with cgroups v2 [1]
enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux
distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems
for Nomad users.
Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer,
but not so for managing cpuset cgroups. Before, Nomad has been making use of
a feature in v1 where a PID could be a member of more than one cgroup. In v2
this is no longer possible, and so the logic around computing cpuset values
must be modified. When Nomad detects v2, it manages cpuset values in-process,
rather than making use of cgroup heirarchy inheritence via shared/reserved
parents.
Nomad will only activate the v2 logic when it detects cgroups2 is mounted at
/sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2
mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to
use the v1 logic, and should operate as before. Systems that do not support
cgroups v2 are also not affected.
When v2 is activated, Nomad will create a parent called nomad.slice (unless
otherwise configured in Client conifg), and create cgroups for tasks using
naming convention <allocID>-<task>.scope. These follow the naming convention
set by systemd and also used by Docker when cgroups v2 is detected.
Client nodes now export a new fingerprint attribute, unique.cgroups.version
which will be set to 'v1' or 'v2' to indicate the cgroups regime in use by
Nomad.
The new cpuset management strategy fixes#11705, where docker tasks that
spawned processes on startup would "leak". In cgroups v2, the PIDs are
started in the cgroup they will always live in, and thus the cause of
the leak is eliminated.
[1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.htmlCloses#11289Fixes#11705#11773#11933
This PR exposes the following existing`consul-template` configuration options to Nomad jobspec authors in the `{job.group.task.template}` stanza.
- `wait`
It also exposes the following`consul-template` configuration to Nomad operators in the `{client.template}` stanza.
- `max_stale`
- `block_query_wait`
- `consul_retry`
- `vault_retry`
- `wait`
Finally, it adds the following new Nomad-specific configuration to the `{client.template}` stanza that allows Operators to set bounds on what `jobspec` authors configure.
- `wait_bounds`
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
By default we should not expose the NOMAD_LICENSE environment variable
to tasks.
Also refactor where the DefaultEnvDenyList lives so we don't have to
maintain 2 copies of it. Since client/config is the most obvious
location, keep a reference there to its unfortunate home buried deep
in command/agent/host. Since the agent uses this list as well for the
/agent/host endpoint the list must be accessible from both command/agent
and client.
on Linux systems this is derived from the configure cpuset cgroup parent (defaults to /nomad)
for non Linux systems and Linux systems where cgroups are not enabled, the client defaults to using all cores
As newer versions of Consul are released, the minimum version of Envoy
it supports as a sidecar proxy also gets bumped. Starting with the upcoming
Consul v1.9.X series, Envoy v1.11.X will no longer be supported. Current
versions of Nomad hardcode a version of Envoy v1.11.2 to be used as the
default implementation of Connect sidecar proxy.
This PR introduces a change such that each Nomad Client will query its
local Consul for a list of Envoy proxies that it supports (https://github.com/hashicorp/consul/pull/8545)
and then launch the Connect sidecar proxy task using the latest supported version
of Envoy. If the `SupportedProxies` API component is not available from
Consul, Nomad will fallback to the old version of Envoy supported by old
versions of Consul.
Setting the meta configuration option `meta.connect.sidecar_image` or
setting the `connect.sidecar_task` stanza will take precedence as is
the current behavior for sidecar proxies.
Setting the meta configuration option `meta.connect.gateway_image`
will take precedence as is the current behavior for connect gateways.
`meta.connect.sidecar_image` and `meta.connect.gateway_image` may make
use of the special `${NOMAD_envoy_version}` variable interpolation, which
resolves to the newest version of Envoy supported by the Consul agent.
Addresses #8585#7665
Host with systemd-resolved have `/etc/resolv.conf` is a symlink
to `/run/systemd/resolve/stub-resolv.conf`. By bind-mounting
/etc/resolv.conf only, the exec container DNS resolution fail very badly.
This change fixes DNS resolution by binding /run/systemd/resolve as
well.
Note that this assumes that the systemd resolver (default to 127.0.0.53) is
accessible within the container. This is the case here because exec
containers share the same network namespace by default.
Jobs with custom network dns configurations are not affected, and Nomad
will continue to use the job dns settings rather than host one.
* ar: support opting into binding host ports to default network IP
* fix config plumbing
* plumb node address into network resource
* struct: only handle network resource upgrade path once
* command/agent/host: collect host data, multi platform
* nomad/structs/structs: new HostDataRequest/Response
* client/agent_endpoint: add RPC endpoint
* command/agent/agent_endpoint: add Host
* api/agent: add the Host endpoint
* nomad/client_agent_endpoint: add Agent Host with forwarding
* nomad/client_agent_endpoint: use findClientConn
This changes forwardMonitorClient and forwardProfileClient to use
findClientConn, which was cribbed from the common parts of those
funcs.
* command/debug: call agent hosts
* command/agent/host: eliminate calling external programs
Consul CLI uses CONSUL_HTTP_TOKEN, so Nomad should use the same.
Note that consul-template uses CONSUL_TOKEN, which Nomad also uses,
so be careful to preserve any reference to that in the consul-template
context.
Passes in agent enable_debug config to nomad server and client configs.
This allows for rpc endpoints to have more granular control if they
should be enabled or not in combination with ACLs.
enable debug on client test
Adds new package that can be used by client and server RPC endpoints to
facilitate monitoring based off of a logger
clean up old code
small comment about write
rm old comment about minsize
rename to Monitor
Removes connection logic from monitor command
Keep connection logic in endpoints, use a channel to send results from
monitoring
use new multisink logger and interfaces
small test for dropped messages
update go-hclogger and update sink/intercept logger interfaces
On macOS, `os.TempDir` returns a symlinked path under `/var` which is
outside of the directories shared into the VM used for Docker, and
that fails tests using Docker that need that mount. If we expand the
symlink to get the real path in `/private`, we're in the shared
folders and can safely mount them.
When rendering a task template, the `plugin` function is no longer
permitted by default and will raise an error. An operator can opt-in
to permitting this function with the new `template.function_blacklist`
field in the client configuration.
When rendering a task template, path parameters for the `file`
function will be treated as relative to the task directory by
default. Relative paths or symlinks that point outside the task
directory will raise an error. An operator can opt-out of this
protection with the new `template.disable_file_sandbox` field in the
client configuration.
This exposes a client flag to disable nomad remote exec support in
environments where access to tasks ought to be restricted.
I used `disable_remote_exec` client flag that defaults to allowing
remote exec. Opted for a client config that can be used to disable
remote exec globally, or to a subset of the cluster if necessary.
Michael Schurter