42d20234a3
Merge pull request #3781 from hashicorp/f-client-fingerprint-refactor
...
Refactor client fingerprinters to return a diff of node attributes
2018-02-01 20:13:44 -05:00
b21233fe23
update log message
2018-02-01 19:46:57 -05:00
6f9c0ab361
req/resp should be within config locks; rename for detected fingerprints
...
changelog
2018-02-01 19:00:39 -05:00
a1a2ca8e33
Add AdvertiseIPv6Address test
2018-02-01 23:21:47 +01:00
94d0ce6006
wrapping the line to less than 80 characters
2018-02-01 14:16:38 -08:00
0d99f256de
changes after running go fmt
2018-02-01 12:07:05 -08:00
04c14b3cb2
add a flag for cpu_hard_limit
2018-02-01 10:09:12 -08:00
d889e471a2
fix up linting
2018-02-01 12:26:38 -05:00
b54203eddc
add detected to more drivers where the driver is found but unusable
2018-02-01 11:28:17 -05:00
0ac43a7622
Skip QEMU graceful shutdown test except on Travis
...
Hopefully we can reuse the SkipSlow helper elsewhere.
2018-01-31 15:47:26 -08:00
b8e8064835
code review fixup
2018-01-31 18:34:03 -05:00
24d060bbb4
Test graceful shutdown
...
Uses an Alpine image which supports ACPI poweroff signal handling.
Handling is only enabled after the VM has booted, so this test blocks
until sshd starts before issuing the command.
2018-01-31 15:05:02 -08:00
db3bdfe898
* Change use_ipv6_address to advertise_ipv6_address.
...
* Set autoadvertise to true.
* Update documentation.
2018-02-01 00:01:25 +01:00
7b53474a6e
add applicable boolean to fingerprint response
...
public fields and remove getter functions
2018-01-31 13:21:45 -05:00
cc54e36f91
Merge pull request #3798 from simar7/qemu-graceful-shutdown-bug
...
[QEMU] Fixing an unintentional variable shadowing
2018-01-30 17:43:44 -08:00
c662cc0172
Merge pull request #3773 from mikemccracken/2018-01-18/destroy-container-on-err
...
lxc: cleanup partially configured containers after errors in Start
2018-01-30 14:52:29 -08:00
9482c322b7
locks for fingerprint reads/writes
2018-01-30 11:32:45 -05:00
76f09db067
Service registration for IPv6 docker addresses
2018-01-30 17:07:47 +01:00
3ad5916f72
Merge pull request #3799 from mikemccracken/2018-01-25/lxc-log-outside-container
...
lxc: move lxc log file out of container-visible alloc dir
2018-01-29 14:32:22 -08:00
14147c8496
remove attributes from periodic fingerprints when state changes
...
write test for client periodic fingerprinters
2018-01-29 13:48:54 -05:00
3d28774f74
Merge pull request #3802 from filipochnik/docker-readonly-rootfs
...
Add ReadonlyRootfs option to the Docker driver
2018-01-29 09:47:27 -08:00
7db4ee1122
rkt_test.go: Remove underscore from variable names
2018-01-29 11:39:50 +01:00
80a17ee8dd
Add ReadonlyRootfs option to the Docker driver
2018-01-27 14:38:29 +01:00
7c19de797c
create safe getters and setters for fingerprint response
2018-01-26 11:22:05 -05:00
896d6f8058
fixups from code review
2018-01-26 07:04:32 -05:00
ac720b84f0
qemu: Make the driver debugging output more indicative
...
Signed-off-by: Simarpreet Singh <simar@linux.com>
2018-01-25 16:40:16 -08:00
8b058f7570
qemu: Fix unintentional shadowing of monitorPath variable
...
Signed-off-by: Simarpreet Singh <simar@linux.com>
2018-01-25 16:24:10 -08:00
09c9ca23f5
lxc: move lxc log file out of container-visible alloc dir
...
The LXC runtime's log file is currently written to TaskDir.LogDir,
which is mounted as alloc/logs inside the containers in the task
group.
This file is not intended to be visible to containers, and depending
on the log level, may have information about the host that a container
should not be allowed to see.
Signed-off-by: Michael McCracken <mikmccra@cisco.com>
2018-01-25 14:41:37 -08:00
88e3063717
fix speling in log
...
Signed-off-by: Michael McCracken <mikmccra@cisco.com>
2018-01-25 13:56:14 -08:00
3d38868b88
add test case for available cgroups
2018-01-25 06:08:07 -05:00
9a8344333b
refactor Fingerprint to request/response construct
2018-01-24 11:54:02 -05:00
f8fe2ea8cb
review cleanup
...
don't export an internal function, and simplify some code
Signed-off-by: Michael McCracken <mikmccra@cisco.com>
2018-01-23 15:03:09 -08:00
a43e0a7b08
Allow overriding an image's entrypoint in Docker
...
Fixes https://github.com/hashicorp/nomad/issues/2219
2018-01-23 14:05:00 -08:00
98a03ad689
Merge pull request #3754 from filipochnik/docker-caps
...
Add an option to add and drop capabilities in the Docker driver
2018-01-23 12:02:50 -08:00
d09cc2a69f
Merge pull request #3492 from hashicorp/f-client-tls-reload
...
Client/Server TLS dynamic reload
2018-01-23 05:51:32 -05:00
4abd269a68
Merge branch 'master' into docker-caps
2018-01-21 12:18:22 +01:00
558812350d
Finish implementation of the capabilities whitelist
2018-01-21 12:14:24 +01:00
00dcfa6db9
lxc: cleanup partially configured containers after errors in Start
...
If there are any errors in container setup after c.Create() in
Start(), the container will be left around, with no way to clean it up
because the handle will not be created or returned from Start.
Added a wrapper that checks for errors and performs appropriate
cleanup. Returning a cleanup function from a wrapped function instead
of just doing the cleanup before returning the error helps to ensure
that future changes that might add or change error exits can't forget
to consider a cleanup function.
Adds a check to the invalid config test case to check that a container
created with an invalid config doesn't get left behind.
Signed-off-by: Michael McCracken <mikmccra@cisco.com>
2018-01-18 16:03:03 -08:00
38182bebea
Drop log level to TRACE
...
For people not using driver networks these log lines would just be
confusing.
2018-01-18 15:35:24 -08:00
9d410c88a7
Improve driver network logging
2018-01-18 15:35:24 -08:00
583e17fad5
Always advertise driver IP when in driver mode
...
Fixes #3681
When in drive address mode Nomad should always advertise the driver's IP
in Consul even when no network exists. This matches the 0.6 behavior.
When in host address mode Nomad advertises the alloc's network's IP if
one exists. Otherwise it lets Consul determine the IP.
I also added some much needed logging around Docker's network discovery.
2018-01-18 15:35:24 -08:00
70817f728c
lxc_test: add test for contents of file in bind-mounted dir
...
Ensure that bind mounting via the volumes config really did work.
Signed-off-by: Michael McCracken <mikmccra@cisco.com>
2018-01-18 05:36:45 -08:00
fd44bdee37
Simplify with gofmt -s
...
Signed-off-by: Michael McCracken <mikmccra@cisco.com>
2018-01-18 04:17:42 -08:00
f176e02a64
lxc: add tests for volume support
...
Signed-off-by: Michael McCracken <mikmccra@cisco.com>
2018-01-18 04:17:42 -08:00
c78c00a2d2
lxc: Add config flag to disable volume support
...
Signed-off-by: Michael McCracken <mikmccra@cisco.com>
2018-01-18 04:17:42 -08:00
d694a8921f
Add volumes config to LXC driver
...
Allow lxc driver to accept bind mount config similarly to the docker
driver.
Includes some static sanity checks in Validate step
Signed-off-by: Michael McCracken <mikmccra@cisco.com>
2018-01-18 04:17:42 -08:00
649f86f094
refactor creating a new tls configuration
2018-01-16 08:02:39 -05:00
6c9f9c8ac3
adding additional test assertions; differentiate reloading agent and http server
2018-01-16 07:34:39 -05:00
4eeb552a4f
Add a sketch of capabilities whitelist logic for the Docker driver
2018-01-14 20:01:47 +01:00
8ee3ce7a26
Add an option to add and drop capabilities in the Docker driver
2018-01-14 19:56:57 +01:00
bec9a72eec
Remove networking from basic resources
2018-01-12 14:33:42 -08:00
867bb6f7f9
Found more priviledge.
...
priviledge -> privilege
2018-01-12 09:44:53 -05:00
9e1e04c6f1
Merge pull request #3727 from filipochnik/fix-gh-2832
...
Recognize renewing non-renewable Vault lease as fatal
2018-01-10 11:47:10 -08:00
189ce7f991
Merge pull request #3723 from hashicorp/b-3702-chown-dirs
...
chown dirs when migrating ephemeral_disk data
2018-01-09 09:27:26 -08:00
e6c27256b7
Test streamed directory ownership
2018-01-08 16:00:07 -08:00
2c79ffb213
chown dirs when migrating ephemeral_disk data
...
Fixes #3702
Added missing chown call and made it conditional on running as root and
not on Windows as we do with files.
2018-01-08 15:31:12 -08:00
1bb1ab5069
fix typo
...
Priviledge -> privilege
2018-01-08 15:56:07 -05:00
214d128eb9
reload raft transport layer
...
fix up linting
2018-01-08 14:52:28 -05:00
d265e11c36
Recognize renewing non-renewable Vault lease as fatal
2018-01-08 20:32:31 +01:00
0708d34135
call reload on agent, client, and server separately
2018-01-08 09:56:31 -05:00
9741097406
reloading tls config should be atomic for clients/servers
2018-01-08 09:21:06 -05:00
ae7fc4695e
fixups from code review
...
Revert "close raft long-lived connections"
This reverts commit 3ffda28206fcb3d63ad117fd1d27ae6f832b6625.
reload raft connections on changing tls
2018-01-08 09:21:06 -05:00
acd3d1b162
fix up downgrading client to plaintext
...
add locks around changing server configuration
2018-01-08 09:21:06 -05:00
c0ad9a4627
add ability to upgrade/downgrade nomad agents tls configurations via sighup
2018-01-08 09:21:06 -05:00
ef76c65da1
Lookup euid outside of loop
2017-12-13 11:50:12 -08:00
5032bf4f5a
Skip tests that require root when not root
...
Also skip Chown on allocdir migration on Windows and when non-root.
Windows doesn't support it, and it will always fail as a non-root user.
2017-12-12 16:58:27 -08:00
f0b0697b57
Keyify struct
2017-12-11 17:23:14 -08:00
c4d4ead199
Fix test broken by mock updates
2017-12-08 16:45:25 -08:00
4b20441eef
Validate port label for host address mode
...
Also skip getting an address for script checks which don't use them.
Fixed a weird invalid reserved port in a TaskRunner test helper as well
as a problem with our mock Alloc/Job. Hopefully the latter doesn't cause
other tests to fail, but we were referencing an invalid PortLabel and
just not catching it before.
2017-12-08 12:03:43 -08:00
30dd570061
Fix interpolation bug with service/check updates
...
Previously if only an interpolated variable used in a service or check
was changed we interpolated the old and new services and checks with the
new variable, so nothing appeared to have changed.
2017-12-08 12:03:00 -08:00
4347026f83
Test Consul from TaskRunner thoroughly
...
Rely less on the mockConsulServiceClient because the real
consul.ServiceClient needs all the testing it can get!
2017-12-08 12:03:00 -08:00
a0d6b6a121
Merge pull request #3630 from hashicorp/b-periodic
...
Handle race between fingerprinters and registration
2017-12-07 16:11:13 -08:00
91ffbbb517
Review feedback
2017-12-07 16:10:57 -08:00
c8e0cb3044
Merge pull request #3591 from hashicorp/b-1755-stop
...
Allow controlling the stop signal for drivers
2017-12-07 17:06:43 -05:00
02baa6c52b
Handle race between fingerprinters and registration
2017-12-07 13:09:37 -08:00
61fa8ad4ba
code review fixes
2017-12-07 13:46:25 -05:00
77ab41124b
set default kill signal on executor shutdown
2017-12-07 11:40:15 -05:00
6cae8fe6e6
extend configurable kill signal to java driver
2017-12-07 11:40:10 -05:00
4409fdacc0
Drop trace logging
2017-12-06 18:02:24 -08:00
cd9a7f14b8
Add logging around heartbeats
2017-12-06 17:57:50 -08:00
350319239c
change location of default kill signal
2017-12-06 17:48:25 -05:00
7dfb64f941
extract signal helper into utils
2017-12-06 14:36:44 -05:00
b08611cfac
move kill_signal to task level, extend to docker
2017-12-06 14:36:39 -05:00
80de7d5ebd
allow controlling the stop signal in exec/raw_exec
2017-12-06 11:28:45 -05:00
9ae849e09c
Merge pull request #3612 from hashicorp/docker-rkt-user
...
Set user for rkt tasks
2017-12-05 17:45:08 -05:00
b66aa5b7f6
Merge pull request #3563 from hashicorp/b-snapshot-atomic
...
Atomic Snapshotting / Sticky Volume Migration
2017-12-05 09:16:33 -08:00
4463dc607e
fix up test
2017-12-05 10:12:40 -05:00
7284f2385a
remove unused user option
2017-12-04 18:01:31 -05:00
6ccc4219d3
Merge pull request #3615 from hashicorp/b-rkt-host-ports
...
rkt: Don't require port_map with host networking
2017-12-04 14:49:42 -08:00
7c74968452
add ability to specify user for rkt
2017-12-04 14:21:48 -05:00
2bf1d6d85e
rkt: Don't require port_map with host networking
...
Also don't try to return a DriverNetwork with host networking. None will
ever exist as that's the point of host networking: rkt won't create a
network namespace.
2017-12-01 17:23:25 -08:00
4ee2122536
get KillTimeout in seconds, not nanoseconds
2017-12-01 10:43:00 -05:00
5e975bbd0f
Add comment and normalize err check ordering
...
as per PR comments
2017-11-29 17:26:11 -08:00
d996c3a231
Check for error file when receiving snapshots
2017-11-29 17:26:11 -08:00
ca946679f6
Destroy partially migrated alloc dirs
...
Test that snapshot errors don't return a valid tar currently fails.
2017-11-29 17:26:11 -08:00
23c66e37c5
Handle errors during snapshotting
...
If an alloc dir is being GC'd (removed) during snapshotting the walk
func will be passed an error. Previously we didn't check for an error so
a panic would occur when we'd try to use a nil `fileInfo`.
2017-11-29 17:26:11 -08:00
2208964948
Support StopTimeout for Docker tasksw
...
Update github.com/fsouza/go-dockerclient
2017-11-29 14:33:05 -05:00
6ad65c51e6
Missed assert in one place
2017-11-20 13:04:38 -06:00
747bd59daa
Better error validation, and added test case for invalid sysctl inputs
2017-11-20 12:07:18 -06:00
c68973747b
Address some review comments
2017-11-20 11:15:09 -06:00
39ef9ee76d
Fix gofmt warnings
2017-11-18 09:23:09 -06:00
e53dd15f58
Fix test compilation after rebase
2017-11-17 17:46:04 -06:00
0fca2e19c8
review(docker driver): sysctls -> sysctl + ulimits -> ulimit
2017-11-17 16:30:45 -06:00
6c93922cb7
Oops
2017-11-17 16:14:14 -06:00
c8363bc44b
💄
2017-11-17 16:03:22 -06:00
281ab90484
test(docker driver): testing sysctls and ulimits
2017-11-17 16:03:22 -06:00
b9a10ff7fa
feat(docker driver): adds sysctls and ulimits configs
2017-11-17 16:03:22 -06:00
69d3bf7392
Merge pull request #3559 from hashicorp/b-metrics
...
Don't emit metrics for non-running tasks
2017-11-17 10:33:23 -08:00
3845c8d200
Merge pull request #3562 from hashicorp/b-3561-rkt-rm
...
Remove rkt pods when exiting
2017-11-16 17:30:21 -08:00
737fb45640
Merge pull request #3551 from hashicorp/b-3419-docker-409-bug
...
Fix Docker name conflict bug by updating dockerclient
2017-11-16 16:38:54 -08:00
437fce9954
Improve rktRemove error message
2017-11-16 15:45:14 -08:00
3ceec0caab
Remove rkt pods when exiting
...
Fixes #3561
2017-11-16 14:33:44 -08:00
7a231897a5
Merge pull request #3556 from angrycub/f-fingerprint-log-level
...
Dropped loglevel for AWS fingerprinter env read misses to DEBUG
2017-11-16 16:27:25 -05:00
969ddf9c2a
Lowered to DEBUG from AD feedback
2017-11-16 14:13:03 -05:00
05b1588cea
Only publish metric when the task is running and dev mode publishes metrics
2017-11-15 13:21:06 -08:00
07963f0b6d
Merge pull request #3546 from hashicorp/f-heuristic
...
Better interface selection heuristic
2017-11-15 12:51:21 -08:00
97ec3974a9
Use interface attached to default route
2017-11-15 11:32:32 -08:00
f86f0bd9ea
Handle leader task being dead in RestoreState
...
Fixes the panic mentioned in
https://github.com/hashicorp/nomad/issues/3420#issuecomment-341666932
While a leader task dying serially stops all follower tasks, the
synchronizing of state is asynchrnous. Nomad can shutdown before all
follower tasks have updated their state to dead thus saving the state
necessary to hit this panic: *have a non-terminal alloc with a dead
leader.*
The actual fix is a simple nil check to not assume non-terminal allocs
leader's have a TaskRunner.
2017-11-15 10:36:13 -08:00
1197637251
Dropped loglevel for AWS fingerprinter env reads
...
Certain environments use WARN for serious logging; however, it's very
possible to have machines without some of the fingerprinted keys
(public-ipv4 and public-hostname specifcally). Setting log level to
INFO seems more consistent with this possibility.
2017-11-15 18:20:59 +00:00
2dfda33703
Nomad agent reload TLS configuration on SIGHUP ( #3479 )
...
* Allow server TLS configuration to be reloaded via SIGHUP
* dynamic tls reloading for nomad agents
* code cleanup and refactoring
* ensure keyloader is initialized, add comments
* allow downgrading from TLS
* initalize keyloader if necessary
* integration test for tls reload
* fix up test to assert success on reloaded TLS configuration
* failure in loading a new TLS config should remain at current
Reload only the config if agent is already using TLS
* reload agent configuration before specific server/client
lock keyloader before loading/caching a new certificate
* introduce a get-or-set method for keyloader
* fixups from code review
* fix up linting errors
* fixups from code review
* add lock for config updates; improve copy of tls config
* GetCertificate only reloads certificates dynamically for the server
* config updates/copies should be on agent
* improve http integration test
* simplify agent reloading storing a local copy of config
* reuse the same keyloader when reloading
* Test that server and client get reloaded but keep keyloader
* Keyloader exposes GetClientCertificate as well for outgoing connections
* Fix spelling
* correct changelog style
2017-11-14 17:53:23 -08:00
3023336b39
Add a test demonstrating the bug
...
Fails on Docker 17.09, passes on Docker 17.06 and earlier
2017-11-14 15:25:52 -08:00
ee31e15f51
Better interface selection heuristic
...
This PR introduces a better interface selection heuristic such that we
select interfaces with globally routable unicast addresses over link
local addresses.
Fixes https://github.com/hashicorp/nomad/issues/3487
2017-11-13 15:13:43 -08:00
926c9ed997
Make device mounting unit test verify configuration via docker inspect
2017-11-13 09:56:54 -06:00
dc2d5fb5a4
Unit test (linux only) that tests mounting a device in the docker driver
2017-11-13 09:56:54 -06:00
4834710e45
Add default value for cgroup permissions for device if not set
2017-11-13 09:56:54 -06:00
9cdee6991c
Remove unnecessary check since validate method already checks this
2017-11-13 09:56:54 -06:00
110c1fd4f0
Add support for passing device into docker driver
2017-11-13 09:56:54 -06:00
d1358ec1b6
alway load all templates
2017-11-10 12:35:51 -08:00
a3ea0c17a0
Handle multiple environment templates
...
Fixes https://github.com/hashicorp/nomad/issues/3498
2017-11-10 11:08:19 -08:00
b3edc12dd9
Merge pull request #3411 from cheeseprocedure/f-qemu-graceful-shutdown
...
Qemu driver: graceful shutdown feature
2017-11-03 16:41:34 -07:00
690b8f4cfb
Remove noisy log line
...
Didn't mean to commit this
2017-11-03 16:00:30 -07:00
11e2870875
Qemu driver: clean up logging; fail unsupported features on Windows
2017-11-03 15:40:20 -07:00
6034916ad1
fix spelling mistake
2017-11-03 15:04:59 -07:00
a23033932a
Merge pull request #3459 from multani/docker-oom-notification
...
docker: log that a container has been killed by the OOM killer
2017-11-03 13:24:03 -07:00
cef9ba9770
Qemu driver: tweaks in response to PR feedback
...
Remove attribute for long qemu monitor path; misc cleanup; update tests
2017-11-03 11:28:56 -07:00
0eaef09675
Remove event GenericSource, and address other code review comments. Also added deprecation info in comments.
2017-11-03 10:10:06 -05:00
5f09c968b3
Move logic for determinic event display message to task_runner, added two new fields DisplayMessage and Details.
2017-11-03 09:13:01 -05:00
b4af10edde
Alloc Runner doesn't panic on restoration.
2017-11-02 16:14:13 -07:00
abd28cbd7d
Merge pull request #3493 from hashicorp/f-remove-atlas
...
Remove Atlas and Scada from codebase
2017-11-02 16:00:44 -07:00
eedbe8efbb
Merge pull request #3490 from hashicorp/f-gc-logging
...
Make unable-to-gc log level adaptive
2017-11-02 14:32:40 -07:00
cb68889652
Added the node_id as a tag
2017-11-02 13:29:10 -07:00
701f462d33
remove atlas
2017-11-02 11:27:21 -07:00
fc33c945be
Make unable-to-gc log level adaptive
...
WARNing when someone has over 50 non-terminal allocs was just too
confusing.
Tested manually with `gc_max_allocs = 10` and bumping a job from `count
= 19` to `count = 21`:
```
2017/11/02 17:54:21.076132 [INFO] client.gc: garbage collection due to number of allocations (19) is over the limit (10) skipped because no terminal allocations
...
2017/11/02 17:54:48.634529 [WARN] client.gc: garbage collection due to number of allocations (21) is over the limit (10) skipped because no terminal allocations
```
2017-11-02 10:57:42 -07:00
8a9d0d40b1
Added support for tagged metrics
2017-11-02 10:07:57 -07:00
5f522c6de3
Incrementing the start counter when we are actually starting a container
2017-11-02 09:51:20 -07:00
44535e5d10
Recording counter for dead allocs properly
2017-11-02 09:51:20 -07:00
0b34e811b7
Added metrics to track task/alloc start/restarts/dead events
2017-11-02 09:51:20 -07:00
00f90323c2
Qemu driver: defer cleanup sooner
2017-11-01 17:37:43 -07:00
43256af5f3
Qemu driver: clean up test logging; retry integration test for longer
2017-11-01 17:21:56 -07:00
b1145705d3
Use strings.Replace() instead of custom function
2017-11-01 15:31:35 -07:00
d51d174fa0
Qemu driver: basic testing of graceful shutdown feature
2017-11-01 15:31:30 -07:00
c26013ea0b
Qemu driver: include PIDs in log output
2017-11-01 15:31:24 -07:00
38d9a391aa
Qemu driver: ensure proper cleanup of resources
2017-11-01 15:31:20 -07:00
46f7e2fa4c
Qemu driver: minor logging fixes
2017-11-01 15:31:14 -07:00
4afb9dfa2d
Standardize driver.qemu logging prefix
2017-11-01 15:30:44 -07:00
5127e75569
Qemu driver: add graceful shutdown feature
2017-11-01 15:30:36 -07:00
1769db98b7
Fix regression by returning error on unknown alloc
2017-11-01 15:16:38 -05:00
9f26b9a403
Fix race in test
2017-11-01 15:16:38 -05:00
73e9b57908
Trigger GCs after alloc changes
...
GC much more aggressively by triggering GCs when allocations become
terminal as well as after new allocations are added.
2017-11-01 15:16:38 -05:00
2a81160dcd
Fix GC'd alloc tracking
...
The Client.allocs map now contains all AllocRunners again, not just
un-GC'd AllocRunners. Client.allocs is only pruned when the server GCs
allocs.
Also stops logging "marked for GC" twice.
2017-11-01 15:16:38 -05:00
c710550551
fix test
2017-10-30 12:35:31 -07:00
4831380e57
Node access is done using locked Node copy
...
Fixes https://github.com/hashicorp/nomad/issues/3454
Reliably reproduced the data race before by having a fingerprinter
change the nodes attributes every millisecond and syncing at the same
rate. With fix, did not ever panic.
2017-10-27 13:27:24 -07:00
5429d1c656
docker: changed OOM killed error message
2017-10-27 20:30:52 +02:00
12615bde9c
docker: log that a container has been killed by the OOM killer
...
Fix : #2203 (at least for Docker tasks)
2017-10-27 18:05:27 +02:00
f117eb28c7
go style vars
2017-10-25 10:49:34 -07:00
3f8495dd0e
fix two flaky tests
2017-10-23 18:15:52 -07:00
cb0d0ef009
move to consul freeport implementation
2017-10-23 16:51:40 -07:00
dbc014b360
Standardize retrieving a free port into a helper package
2017-10-23 16:48:20 -07:00
4a69e1ad15
don't double parallel
2017-10-23 16:48:06 -07:00
96ca2bbe4c
respond to comments
2017-10-23 15:50:27 -07:00
99c81b5848
Skip if no docker
2017-10-19 16:55:10 -07:00
593536664e
fix flaky java tests
2017-10-19 16:49:57 -07:00
4bc452b479
Undo darwin user setting
2017-10-19 16:49:57 -07:00
c7c6964313
Run as user on mac
2017-10-19 16:49:57 -07:00
55a1dffa2f
sudo docker works
2017-10-19 16:49:57 -07:00
805e7b3b62
docker tests
2017-10-19 16:49:57 -07:00
797f49702e
Add logging around moby/moby#32648 bug
2017-10-18 10:44:03 -07:00
22ac450b2f
Properly fail rkt fingerprinting on old vesions
2017-10-16 13:58:58 -07:00
d7732c1a58
Squelch repeated rkt version warnings
2017-10-16 12:09:47 -07:00
b5fd075d74
Test fixes from #3383
2017-10-13 15:45:35 -07:00
b63eee17e9
Merge pull request #3383 from hashicorp/b-migrate-token
...
base64 migrate token
2017-10-13 13:46:54 -07:00
dfd2967cdb
Merge pull request #3376 from hashicorp/f-node-acls
...
Allow Node.SecretID for Node.GetNode and Allocs.GetAlloc
2017-10-13 11:51:48 -07:00
15b991e039
base64 migrate token
...
HTTP header values must be ASCII.
Also constant time compare tokens and test the generate and compare
helper functions.
2017-10-13 10:59:13 -07:00
85178d6048
rkt remove allocid
2017-10-13 10:07:50 -07:00
cefbc72b49
Remove AllocID from ExecutorContext
2017-10-13 17:07:49 +02:00
4a70d4356a
Alloc watcher must send Node.SecretID as AuthToken
...
An auth token is required if ACLs are enabled
2017-10-12 16:38:02 -07:00
84d8a51be1
SecretID -> AuthToken
2017-10-12 15:16:33 -07:00
59ff94cd71
Don't panic on unexpeced Consul response
...
Fixes #3326
2017-10-11 18:25:54 -07:00
e1c4701a43
fix up build warnings
2017-10-11 17:11:57 -07:00
b018ca4d46
fixing up code review comments
2017-10-11 17:09:20 -07:00
a77e462465
add tests for functionality
2017-10-11 17:09:20 -07:00
410adaf726
Add functionality for authenticated volumes
2017-10-11 17:09:20 -07:00
6d3d0a9391
Nomad UI Command
2017-10-09 23:01:55 -07:00
f788974f8a
Merge pull request #3288 from simar7/qemu-improvements
...
qemu: Add bound checks for memory assignment
2017-10-02 14:47:05 -07:00
d801584c46
qemu: Fix lower memory bound to 128M
...
Signed-off-by: Simarpreet Singh <simar@linux.com>
2017-10-02 14:29:44 -07:00
10d7d6dab0
gofmt: format qemu.go and qemu_test.go
...
Signed-off-by: Simarpreet Singh <simar@linux.com>
2017-10-02 13:16:48 -07:00
a66c53d45a
Remove `structs` import from `api`
...
Goes a step further and removes structs import from api's tests as well
by moving GenerateUUID to its own package.
2017-09-29 10:36:08 -07:00
77f1fe40e7
Properly autodetect Docker IP in Windows
...
Our Docker network plugin autodetection code was erroneously treating
Window's default network `nat` as a plugin and defaulting to it instead
of the host.
Fixes #3218
2017-09-27 16:49:23 -07:00
a8a87af7ed
Only build rkt driver on linux
...
Build stub for non-linux targets
2017-09-27 14:21:45 -07:00
3d99e71de8
qemu: Add bound checks for memory assignment
...
Signed-off-by: Simarpreet Singh <simar@linux.com>
2017-09-26 21:07:48 -07:00
d7229ce6c5
Merge pull request #3256 from dalegaard/master
...
Enable rkt driver to use address_mode = 'driver'
2017-09-26 18:04:37 -05:00
4173834231
Enable more linters
2017-09-26 15:26:33 -07:00
9f584d1114
Ignore rkt network failure if container died early
...
If the container dies before the network can be read, we now ignore the
error coming out of the network information polling loop. Nomad will
restart the task regardless, so we might be masking the actual error.
The polling loop for the rkt network information, inside the `Start`
method, was getting a bit unwieldy. It's been refactored out so it's not
a seperate function.
2017-09-27 00:15:27 +02:00
b43ec57c02
Make rkt port mapping test not exit immediately
...
The rkt port mapping test currently starts redis with --version, which
obviously makes redis exit again almost immediately. This means that the
container exists before the network status can be queried, and so the
test fails.
2017-09-26 23:10:24 +02:00
17d155d316
Improve rkt driver network status poll loop
...
The network status poll loop will now report any networks it ignored, as
well as a no-networks situations.
2017-09-26 21:49:45 +02:00
bafd32fda0
Refactor rkt network status loop
...
The network status poll loop for the rkt drivers `Start` method was a
bit messy, and could not display the last encountered error. Here we
clean it up.
2017-09-26 21:27:12 +02:00
5e9e2b07bd
Small logging fix in rkt/driver
2017-09-26 19:36:13 +02:00
3d25fd3b00
Bump minimum rkt version to 1.27.0.
...
The changes introduces in #3256 require at least rkt 1.27.0 because of
a bug in the JSON output of `rkt status` in previous versions.
Here we upgrade all references to rkt's minimum version, and also make
travis and vagrant use this version when running tests.
Finally we add a CHANGELOG notice.
2017-09-26 19:15:43 +02:00
f55f2b8f24
Turn rkt network status failure into Start failure
...
If the rkt driver cannot get the network status, for a task with a
configured port mapping, it will now fail the Start() call and kill the
task instead of simply logging. This matches the Docker behavior.
If no port map is specified, the warnings will be logged but the task
will be allowed to start.
2017-09-26 10:20:57 +02:00
55a2e60e1a
Test for rkt driver setting DriverNetwork
...
To test that the rkt driver correctly sets a DriverNetwork, at least
when a port mapping is requested, we amend the
TestRktDriver_PortsMapping test with a small check.
2017-09-26 09:10:50 +02:00
2d307d5beb
Discard errors from rkt status and cat-manifest
...
Since we don't actually show these errors anywhere, just discard them
right away.
2017-09-26 09:05:47 +02:00
b26454cf99
Move setGaugeForAllocationStats to emitClientMetrics
2017-09-25 16:05:49 +00:00
cbcbe0da2e
Expose rkt DriverNetwork
...
Currently the rkt driver does not expose a DriverNetwork instance after
starting the container, which means that address_mode = 'driver' does
not work.
To get the container network information, we can call `rkt status` on
the UUID of the container and grab the container IP from there.
For the port map, we need to grab the pod manifest as it will tell us
which ports the container exposes. We then cross-reference the
configured port name with the container port names, and use that to
create a correct port mapping.
To avoid doing a (bad) reimplementation of the appc schema(which rkt
uses for its manifest) and rkt apis, we pull those in as vendored
dependencies. The versions used are the same ones that rkt use in their
glide dependency configuration for version 1.28.0.
2017-09-21 00:34:22 +02:00
7ac599d509
Use rkt prepare + run-prepared instead of run.
...
The rkt driver currently executes run and asks that the pod UUID is
written to a file that is then polled for changes for up to five
seconds. Many container fetches will take longer than this, so this
method will often not be able to track the pod UUID reliably.
To avoid this problem, rkt allows pods to be first prepared, which will
return their UUID, and then run as a second invocation.
Here we convert the rkt driver's Start method to use this method
instead. This way, the UUID will always be tracked correctly.
2017-09-21 00:17:31 +02:00
f92ffe5af5
Merge pull request #3105 from hashicorp/f-876-restart-unhealthy
...
Restart unhealthy tasks
2017-09-17 19:38:32 -07:00
a16c97394f
Fix incorrect docker stats
2017-09-16 00:43:03 -04:00
67a4a169a9
Name const after what it represents
2017-09-15 14:57:18 -07:00
79a7bf3d7c
Cleanup and test restart failure code
2017-09-15 14:54:37 -07:00
06ca379da0
Add comments
2017-09-15 14:34:36 -07:00
4dbaa52aba
Fold SetFailure into SetRestartTriggered
2017-09-14 16:48:39 -07:00
ed77c0944b
DRY up restart handling a bit.
...
All 3 error/failure cases share restart logic, but 2 of them have
special cased conditions.
2017-09-14 16:48:39 -07:00
73fb71ca10
RestartDelay isn't needed as checks are re-added on restarts
...
@dadgar made the excellent observation in #3105 that TaskRunner removes
and re-registers checks on restarts. This means checkWatcher doesn't
need to do *any* internal restart tracking. Individual checks can just
remove themselves and be re-added when the task restarts.
2017-09-14 16:48:39 -07:00
06dd86adbd
Remove unused lastStart field
2017-09-14 16:47:41 -07:00
0447f79288
Removed partially implemented allocLock
2017-09-14 16:47:41 -07:00
ade29ecbed
Improve check watcher logging and add tests
...
Also expose a mock Consul Agent to allow testing ServiceClient and
checkWatcher from TaskRunner without actually talking to a real Consul.
2017-09-14 16:47:41 -07:00
a137676358
Add comments and move delay calc to TaskRunner
2017-09-14 16:46:54 -07:00
8a87475498
Use existing restart policy infrastructure
2017-09-14 16:46:54 -07:00
22690c5f4c
Add check watcher for restarting unhealthy tasks
2017-09-14 16:46:54 -07:00
d306da846c
changelog and feedback
2017-09-14 14:08:58 -07:00
07ed83fdd5
Non-locked accessors to common Node fields
...
This PR removes locking around commonly accessed node attributes that do
not need to be locked. The locking could cause nodes to TTL as the
heartbeat code path was acquiring a lock that could be held for an
excessively long time. An example of this is when Vault is inaccessible,
since the fingerprint is run with a lock held but the Vault
fingerprinter makes the API calls with a large timeout.
Fixes https://github.com/hashicorp/nomad/issues/2689
2017-09-14 14:08:26 -07:00
536d38454b
Merge pull request #3191 from hashicorp/b-tagged-metrics-panic
...
Fix panic in emitting tagged allocation metrics
2017-09-11 14:28:50 -04:00
d4aed839d2
Merge pull request #3185 from hashicorp/f-acl-reset
...
Add ability to reset ACL bootstrap process
2017-09-11 10:47:17 -07:00
3d5ecaafff
Address @dadgar feedback
2017-09-11 10:30:59 -07:00
b3958faa14
Merge pull request #3187 from hashicorp/b-windows-docker
...
Fix MemorySwappiness on Windows Docker
2017-09-11 09:56:49 -07:00
1cd8f7523f
Merge pull request #3184 from hashicorp/b-docker-logging
...
Fix docker user specified syslogging
2017-09-11 09:31:33 -07:00
848af92183
fix panic in emitting tagged metrics
2017-09-11 15:32:37 +00:00
d3a9463358
Fix MemorySwappiness on Windows Docker
...
Fixes https://github.com/hashicorp/nomad/issues/3181
2017-09-10 17:46:45 -07:00
3ec7946b3e
Fix invalid CPU stats on Windows
...
This PR fixes an issue introduced in Nomad 0.6.0 due to
https://github.com/shirou/gopsutil/issues/420 . The issue arised from the
fact that the Windows stats from gopsutil reports CPUs in
percentages where we expected ticks.
2017-09-10 15:30:48 -07:00
637ae9580a
Fix docker user specified syslogging
2017-09-10 14:57:48 -07:00
448145872f
client: Guard against "NaN" values from floats
...
This commit protects against finding `0.NaN` tokens in JSON streams
because of infinity representation on serialization.
2017-09-08 16:21:07 -05:00
31f9e099d9
Merge pull request #3148 from clinta/purge-stopped
...
Always purge stopped containers
2017-09-05 17:18:05 -07:00
6fdaf38389
Fix repo name passed to docker credential helpers
...
This PR fixes the server url passed to docker credential helpers and
fixes stderr capture.
Fixes https://github.com/hashicorp/nomad/issues/2957
2017-09-05 16:43:21 -07:00
21564c7c04
Parse Docker mounts correctly ( #3163 )
...
* Parse Docker mounts correctly
This PR fixes the parsing of Docker mounts and adds testing to ensure no
regressions.
Fixes https://github.com/hashicorp/nomad/issues/3156
* Review feedback
2017-09-05 14:02:57 -07:00
0ef43c3c5f
final code review fixups
2017-09-05 18:47:44 +00:00
dea1fa089b
fix up travis test failure via race condition
2017-09-05 15:04:59 +00:00
a8cbd0b559
fixups from code review
2017-09-05 14:13:34 +00:00
f72e4aad13
labels depend on full setup of client beforehand
2017-09-05 14:13:34 +00:00
87a814397d
refactor to use baseLabels
2017-09-05 14:13:34 +00:00
b2953d905a
pass in commonly used values
2017-09-05 14:13:34 +00:00
c634043069
create base labels to be used in every metric
2017-09-05 14:13:34 +00:00
f5ea83da8d
emit metrics using labels, add option for backwards compatibility
2017-09-05 14:12:57 +00:00
0175f80775
add metrics options to client config
2017-09-05 14:12:57 +00:00
b8bf35f087
ACL RPCs allow stale reads for scalability
2017-09-04 13:07:44 -07:00
f31cd6a618
client: fixing policy resolution after ACL endpoint enforcement
2017-09-04 13:05:53 -07:00
ddcc5f89bc
Add ErrPermissionDenied, rename TokenNotFound
2017-09-04 13:05:53 -07:00
76a03f2d8e
Address @dadgar feedback
2017-09-04 13:05:53 -07:00
e3f32ca6f1
client: adding token resolution logic
2017-09-04 13:05:36 -07:00
688897561b
client: adding token cache for ACL resolution
2017-09-04 13:05:36 -07:00
c2e72e8a9c
client: create ACL and Policy cache
2017-09-04 13:05:35 -07:00
792f176a44
agent: thread ACL config to client
2017-09-04 13:04:45 -07:00
b5c2636313
Always purge stopped containers
2017-08-31 14:28:48 -04:00
7e35ab6abb
fix logging re-init
2017-08-30 12:36:31 -04:00
78823d559b
Squelch logspam when unable to get disk usage stats
...
To reproduce logspam:
```
$ docker plugin install --grant-all-permissions vieux/sshfs
$ nomad agent -dev
...
2017/08/25 17:09:03.282868 [WARN] client: error fetching host disk usage stats for /var/lib/docker/plugins/a8b4a69b07e5180f828d19e1e9e102ccc0e26f9c9939eaef85357260c30b20a7/rootfs/mnt/volumes: permission denied
... repeats every collection period ...
```
2017-08-28 12:04:32 -07:00
876732833f
Merge pull request #3073 from clinta/docker-500
...
Allow retry of 500 API errors to be handled by restart policies
2017-08-24 16:57:36 -07:00
fd7d614ae4
Handle interfaces that only have link-local addrs
...
This PR changes the fingerprint handling of network interfaces that only
contain link local addresses. The new behavior is to prefer globally
routable addresses and if none are detected, to fall back to link local
addresses if the operator hasn't disallowed it. This gives us pre 0.6
behavior for interfaces with only link local addresses but 0.6+ behavior
for IPv6 interfaces that will always have a link-local address.
Fixes https://github.com/hashicorp/nomad/issues/3005
/cc diptanuc
2017-08-23 15:32:22 -07:00
211a793530
resolve feedback
2017-08-23 14:17:00 -07:00
653733e093
Clean up docker mounts
2017-08-22 14:12:44 -07:00
ae230395ba
Allow retry of 500 API errors to be handled by restart policies
2017-08-22 14:04:46 -04:00
51a27cc83d
Merge pull request #3031 from hashicorp/f-2924-consul-headers
...
Add Header and Method support for HTTP checks
2017-08-18 13:35:08 -07:00
7ebd429a86
Merge mistake made go fmt fail
2017-08-18 13:19:44 -07:00
5c015da3cb
Merge pull request #3021 from clinta/docker-mount2
...
Expose docker mount options
2017-08-17 16:57:09 -07:00
ff3944a981
Update and test service/check interpolation
2017-08-17 16:49:14 -07:00
b4813747d0
Merge pull request #3043 from hashicorp/f-2441-shutdown-delay
...
Add optional shutdown delay to tasks
2017-08-17 14:37:48 -07:00
c709251ed6
Lower ShutdownDelay for non-Travis testing
2017-08-17 14:23:42 -07:00
b33b2fb4c0
Lower shutdown delay in test
2017-08-17 13:57:22 -07:00
0726ca75e3
Make shutdown delay log DEBUG, not INFO
2017-08-17 11:28:33 -07:00
f0460156ae
restrict mount to volume type
2017-08-17 09:52:13 -04:00
d529b422b2
Add optional shutdown delay to tasks
...
Fixes #2441
Defaults to 0 (no delay) for backward compat and because this feature
should be opt-in.
2017-08-16 17:59:46 -07:00
d6187cd3e8
Fix tests
2017-08-16 16:26:52 -07:00
1a86aecf55
Add version package
...
This PR adds a version package and consolidates version strings into a
Version struct.
2017-08-16 15:44:21 -07:00
3d69961c3a
Must be root for TestAllocDir_CreateDir
2017-08-16 10:46:14 -07:00
7dd86b5dfe
Merge pull request #3025 from hashicorp/f-health-events
...
Emit task events explaining alloc health
2017-08-15 12:23:46 -07:00
bb165b97ef
comments
2017-08-15 12:23:29 -07:00
1126268a81
Fix formatting
2017-08-15 10:37:02 -07:00
74d5c272c6
Cleanup comments and return val
2017-08-14 16:59:03 -07:00
46b7fd45d7
spelling
2017-08-14 16:55:59 -07:00
de8ea243b6
Return move errors from local Migrate like remote
...
Since alloc runner just logs these errors and continues there's no
reason not to return it.
2017-08-14 16:48:56 -07:00
7342e23669
Move migrating state into prevAllocWatcher
2017-08-14 16:02:28 -07:00
fdc0115427
test
2017-08-12 14:42:53 -07:00
56801349eb
Refactor health watcher and emit events
2017-08-12 14:23:36 -07:00
4601419d63
Soft fail on migration errors
2017-08-11 16:50:30 -07:00
3dbd764969
Exit if alloc listener closes
...
Add test for that case, add comments, remove debug logging
2017-08-11 16:22:02 -07:00
b7915bdac7
Update tests for new blocking/migrating code
2017-08-11 16:21:57 -07:00
ad6cec9e82
Set failed status instead of panic'ing
...
Fixup some TODOs and formatting left from new prevAllocWatcher code.
2017-08-11 16:21:35 -07:00
e41a654917
switch from alloc blocker to new interface
...
interface has 3 implementations:
1. local for blocking and moving data locally
2. remote for blocking and moving data from another node
3. noop for allocs that don't need to block
2017-08-11 16:21:35 -07:00
ee04717a0b
initial attempt at refactoring blocked/migrating
2017-08-11 16:21:35 -07:00
ec6e6e6c66
Only set alloc status if it's not already terminal
2017-08-11 16:21:35 -07:00
0d5127d5fc
Merge pull request #3011 from hashicorp/b-cv-fix-TestEnvAWSFingerprint_aws
...
Updated AWS fingerprint test for ami-id
2017-08-11 10:58:22 -07:00
2fdfd9af4a
Merge pull request #2992 from decoomanj/master
...
Added dnsoptions to the docker driver
2017-08-11 10:12:36 -07:00
507c75bd16
Updated AWS fingerprint test for ami-id
...
In https://github.com/hashicorp/nomad/pull/2999 , I changed ami-id
to non-unique. This updates the test to reflect that.
2017-08-11 12:54:27 -04:00
8b88d56c01
updated message in test
2017-08-11 09:24:15 +02:00
1b061b8f47
Unmount task directories when alloc is terminal
...
This PR unmounts directories from tasks when the alloc is terminal
rather than when it is garbage collected.
/cc @angrycub
2017-08-10 13:28:17 -07:00
6e20acb503
Merge pull request #2984 from hashicorp/b-tags
...
Fix alloc health with checks using interpolation
2017-08-10 13:07:25 -07:00
6b238edc22
Merge pull request #3001 from hashicorp/f-template-events
...
Template emits events explaining why it is blocked
2017-08-10 13:00:58 -07:00
bd9f63d20e
address comments
2017-08-10 13:00:06 -07:00
9063b500e0
expose mount options to nomad
2017-08-10 12:37:17 -04:00
83ba2f1814
Template emits events explaining why it is blocked
...
This PR does the following:
* Adds a mechanism to emit events in the TaskRunner
* Vendors a new version of Consul-Template that allows extraction of
missing dependencies
* Adds logic to our consul_template.go to determine missing events and
emit them in a batched fashion.
* Refactors the consul_template code to split the run method and take in
a config struct rather than many parameters.
Fixes https://github.com/hashicorp/nomad/issues/2578
2017-08-09 18:01:27 -07:00
ae466eaaa7
AMI ID is potentally non-unique
...
Changed the keys map to reflect that.
2017-08-09 12:53:54 -04:00
633bcee661
fixed typo
2017-08-09 14:44:38 +02:00
804fc0d06f
added dnsoptions to the docker driver
2017-08-09 13:30:06 +02:00
aba107be99
Merge pull request #2979 from lfarnell/cleanup
...
Code cleanup
2017-08-08 10:21:15 -07:00
4f6f6a13c8
Emit generic task events
2017-08-07 21:26:04 -07:00
79d25b7db9
Merge pull request #2947 from hashicorp/f-vault-grace
...
Allow template to set Vault grace
2017-08-07 16:29:53 -07:00
93b9a1bf20
Rename runnerConfig
2017-08-07 16:29:42 -07:00
d86b3977b9
Fix alloc health with checks using interpolation
...
Fixes an issue in which the allocation health watcher was checking for
allocations health based on un-interpolated services and checks. Change
the interface for retrieving check information from Consul to retrieving
all registered services and checks by allocation. In the future this
will allow us to output nicer messages.
Fixes https://github.com/hashicorp/nomad/issues/2969
2017-08-07 16:27:08 -07:00
f0ced87b95
fixed all spelling mistakes for goreport
2017-08-07 17:13:05 -04:00
c76b3b54b9
Merge branch 'master' into fix-pending-state
2017-08-03 17:27:03 -07:00
067a638478
Allow template to set Vault grace
...
This PR allows a template to specify the Vault grace duration.
Fixes https://github.com/hashicorp/nomad/issues/2922
2017-08-01 14:14:08 -07:00
562ea52c8e
vendor vault api
2017-08-01 09:30:55 -07:00
6243c9eb86
Merge pull request #2883 from kmalec/add-support-for-readonly-mount
...
rkt driver support for read-only volumes mounts
2017-07-31 10:58:22 -07:00
010567dba8
Fix leaked plugin files for syslog server
...
This PR fixes a leaking of the unix socket used when launching a syslog
server for the Docker driver.
Fixes https://github.com/hashicorp/nomad/issues/2844
2017-07-30 17:51:38 -07:00
a9c786a4fe
Make test Vault pick random ports
2017-07-25 17:40:59 -07:00
b01dd31f26
Don't attempt to restore tasks that never sync'd
2017-07-24 15:58:46 -07:00
031da7a21c
fix vet
2017-07-22 22:43:33 -07:00
0f3f1ea68b
travis check fixes
2017-07-22 21:01:22 -07:00
c1a72d24e6
fingerprinters
2017-07-22 20:38:03 -07:00
62c55c8fc9
fix slow resolve on mac
2017-07-22 19:58:30 -07:00
72d055aa9c
drop rkt deadline
2017-07-22 19:54:06 -07:00
219fecc705
Merge branch 'master' of github.com:hashicorp/nomad
2017-07-22 19:48:54 -07:00
d760e68774
darwin test fixes
2017-07-22 19:48:47 -07:00
553bc91725
Parallel client tests ( #2890 )
...
* alloc_runner
* Random tests
* parallel task_runner and no exec compatible check
* Parallel client
* Fail fast and use random ports
* Fix docker port mapping
* Make concurrent pull less timing dependant
* up parallel
* Fixes
* don't build chroots in parallel on travis
* Reduce parallelism on travis with lxc/rkt
* make java test app not run forever
* drop parallelism a little
* use docker ports that are out of the os's ephemeral port range
* Limit even more on travis
* rkt deadline
2017-07-22 19:04:36 -07:00
b6f0782732
typo
2017-07-22 12:55:30 -07:00
8cf9d15b01
typo
2017-07-22 12:33:07 -07:00
9e9c20ca77
small fixes
2017-07-22 12:25:02 -07:00
5a3df2ed89
Merge pull request #2888 from hashicorp/b-fix-allocrunner-test
...
Fix TestAllocRunner_TaskLeader_StopTG and unrelated races
2017-07-22 11:44:04 -07:00
46c8bec9b0
faster vaultclient
2017-07-21 19:38:37 -07:00
d840fc8c95
Fix tr race by not sharing alloc/task
...
prestart only needs the original alloc/task so pass their pointers in.
Task updates may concurrently replace the pointer on tr.
2017-07-21 16:17:42 -07:00
a22cfa8387
Minor test race fix
2017-07-21 16:17:23 -07:00
9a7a1d8c13
Fix race by not accessing tr.task from ar
2017-07-21 16:16:53 -07:00
2e9a1e3fa6
Remove unneeded saveTaskRunnerState method
...
Collapse it into the one place it's called
2017-07-21 16:16:02 -07:00
996ce9286e
Fix test race by locking around ar.tasks access
2017-07-21 14:25:51 -07:00
8d1d8eac46
Fix handle race
2017-07-21 14:00:32 -07:00
5f40901422
Fix more test races
2017-07-21 14:00:21 -07:00
b9ba447399
Fixup a few more even rarer test races
2017-07-21 13:43:32 -07:00
38cb2021dd
Always interpolate task before calling with Consul
...
Also switch to returning a copy of the task to avoid races between
altering the Task and persitence.
2017-07-21 13:37:16 -07:00
6e80a8ee39
Fix TestAllocRunner_TaskLeader_StopTG
...
Also make alloc runner tests less racy. Basically every alloc runner
test used to have races with `upd.{Count,Allocs}`
2017-07-21 13:37:16 -07:00
e509661cf9
executor and logging pkg
2017-07-21 12:14:54 -07:00
7c433a1767
Parallel
2017-07-21 12:06:39 -07:00
4b98f94a88
Allow rkt driver to mount volumes read-only
2017-07-21 13:05:15 +02:00
56f9cf86df
Speed up client startup
2017-07-20 22:34:24 -07:00
Chelsea Komlo