As newer versions of Consul are released, the minimum version of Envoy
it supports as a sidecar proxy also gets bumped. Starting with the upcoming
Consul v1.9.X series, Envoy v1.11.X will no longer be supported. Current
versions of Nomad hardcode a version of Envoy v1.11.2 to be used as the
default implementation of Connect sidecar proxy.
This PR introduces a change such that each Nomad Client will query its
local Consul for a list of Envoy proxies that it supports (https://github.com/hashicorp/consul/pull/8545)
and then launch the Connect sidecar proxy task using the latest supported version
of Envoy. If the `SupportedProxies` API component is not available from
Consul, Nomad will fallback to the old version of Envoy supported by old
versions of Consul.
Setting the meta configuration option `meta.connect.sidecar_image` or
setting the `connect.sidecar_task` stanza will take precedence as is
the current behavior for sidecar proxies.
Setting the meta configuration option `meta.connect.gateway_image`
will take precedence as is the current behavior for connect gateways.
`meta.connect.sidecar_image` and `meta.connect.gateway_image` may make
use of the special `${NOMAD_envoy_version}` variable interpolation, which
resolves to the newest version of Envoy supported by the Consul agent.
Addresses #8585#7665
When deregistering a service, consul also deregisters the associated
checks. The current state keeps track of all services and all checks
separately and deregisters them in sequence, which leads, whether during
syncs or shutdowns, to check deregistrations happening twice and failing
the second time (generating errors in logs)
This fix includes:
- a fix to the sync logic that just pulls the checks *after* the
services have been synced
- a fix to the shutdown mechanism that gets an updated list of checks
after deregistering the services, so that we get a cleaner check
deregistration process.
This PR adds initial support for running Consul Connect Ingress Gateways (CIGs) in Nomad. These gateways are declared as part of a task group level service definition within the connect stanza.
```hcl
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
ingress {
// ingress-gateway configuration entry
}
}
}
}
```
A gateway can be run in `bridge` or `host` networking mode, with the caveat that host networking necessitates manually specifying the Envoy admin listener (which cannot be disabled) via the service port value.
Currently Envoy is the only supported gateway implementation in Consul, and Nomad only supports running Envoy as a gateway using the docker driver.
Aims to address #8294 and tangentially #8647
This change adds the ability to set the fields `success_before_passing` and
`failures_before_critical` on Consul service check definitions. This is a
feature added to Consul v1.7.0 and later.
https://www.consul.io/docs/agent/checks#success-failures-before-passing-critical
Nomad doesn't do much besides pass the fields through to Consul.
Fixes#6913
This PR adds the capability of running Connect Native Tasks on Nomad,
particularly when TLS and ACLs are enabled on Consul.
The `connect` stanza now includes a `native` parameter, which can be
set to the name of task that backs the Connect Native Consul service.
There is a new Client configuration parameter for the `consul` stanza
called `share_ssl`. Like `allow_unauthenticated` the default value is
true, but recommended to be disabled in production environments. When
enabled, the Nomad Client's Consul TLS information is shared with
Connect Native tasks through the normal Consul environment variables.
This does NOT include auth or token information.
If Consul ACLs are enabled, Service Identity Tokens are automatically
and injected into the Connect Native task through the CONSUL_HTTP_TOKEN
environment variable.
Any of the automatically set environment variables can be overridden by
the Connect Native task using the `env` stanza.
Fixes#6083
In some refactoring, a bug was introduced where if the connect.proxy
stanza in a submitted job was nil, the default proxy configuration
would not be initialized with default values, effectively breaking
Connect.
connect {
sidecar_service {} # should work
}
In contrast, by setting an empty proxy stanza, the config values would
be inserted correctly.
connect {
sidecar_service {
proxy {} # workaround
}
}
This commit restores the original behavior, where having a proxy
stanza present is not required.
The unit test for this case has also been corrected.
Enable configuration of HTTP and gRPC endpoints which should be exposed by
the Connect sidecar proxy. This changeset is the first "non-magical" pass
that lays the groundwork for enabling Consul service checks for tasks
running in a network namespace because they are Connect-enabled. The changes
here provide for full configuration of the
connect {
sidecar_service {
proxy {
expose {
paths = [{
path = <exposed endpoint>
protocol = <http or grpc>
local_path_port = <local endpoint port>
listener_port = <inbound mesh port>
}, ... ]
}
}
}
stanza. Everything from `expose` and below is new, and partially implements
the precedent set by Consul:
https://www.consul.io/docs/connect/registration/service-registration.html#expose-paths-configuration-reference
Combined with a task-group level network port-mapping in the form:
port "exposeExample" { to = -1 }
it is now possible to "punch a hole" through the network namespace
to a specific HTTP or gRPC path, with the anticipated use case of creating
Consul checks on Connect enabled services.
A future PR may introduce more automagic behavior, where we can do things like
1) auto-fill the 'expose.path.local_path_port' with the default value of the
'service.port' value for task-group level connect-enabled services.
2) automatically generate a port-mapping
3) enable an 'expose.checks' flag which automatically creates exposed endpoints
for every compatible consul service check (http/grpc checks on connect
enabled services).
Fix a bug where consul service definitions would not be updated if changes
were made to the service in the Nomad job. Currently this only fixes the
bug for cases where the fix is a matter of updating consul agent's service
registration. There is related bug where destructive changes are required
(see #6877) which will be fixed in another PR.
The enable_tag_override configuration setting for the parent service is
applied to the sidecar service.
Fixes#6459
Consul provides a feature of Service Definitions where the tags
associated with a service can be modified through the Catalog API,
overriding the value(s) configured in the agent's service configuration.
To enable this feature, the flag enable_tag_override must be configured
in the service definition.
Previously, Nomad did not allow configuring this flag, and thus the default
value of false was used. Now, it is configurable.
Because Nomad itself acts as a state machine around the the service definitions
of the tasks it manages, it's worth describing what happens when this feature
is enabled and why.
Consider the basic case where there is no Nomad, and your service is provided
to consul as a boring JSON file. The ultimate source of truth for the definition
of that service is the file, and is stored in the agent. Later, Consul performs
"anti-entropy" which synchronizes the Catalog (stored only the leaders). Then
with enable_tag_override=true, the tags field is available for "external"
modification through the Catalog API (rather than directly configuring the
service definition file, or using the Agent API). The important observation
is that if the service definition ever changes (i.e. the file is changed &
config reloaded OR the Agent API is used to modify the service), those
"external" tag values are thrown away, and the new service definition is
once again the source of truth.
In the Nomad case, Nomad itself is the source of truth over the Agent in
the same way the JSON file was the source of truth in the example above.
That means any time Nomad sets a new service definition, any externally
configured tags are going to be replaced. When does this happen? Only on
major lifecycle events, for example when a task is modified because of an
updated job spec from the 'nomad job run <existing>' command. Otherwise,
Nomad's periodic re-sync's with Consul will now no longer try to restore
the externally modified tag values (as long as enable_tag_override=true).
Fixes#2057
Nomad jobs may be configured with a TaskGroup which contains a Service
definition that is Consul Connect enabled. These service definitions end
up establishing a Consul Connect Proxy Task (e.g. envoy, by default). In
the case where Consul ACLs are enabled, a Service Identity token is required
for these tasks to run & connect, etc. This changeset enables the Nomad Server
to recieve RPC requests for the derivation of SI tokens on behalf of instances
of Consul Connect using Tasks. Those tokens are then relayed back to the
requesting Client, which then injects the tokens in the secrets directory of
the Task.
* client: improve group service stanza interpolation and check_restart support
Interpolation can now be done on group service stanzas. Note that some task runtime specific information
that was previously available when the service was registered poststart of a task is no longer available.
The check_restart stanza for checks defined on group services will now properly restart the allocation upon
check failures if configured.
makeAllocTaskServices did not do a nil check on AllocatedResources
which causes a panic when upgrading directly from 0.8 to 0.10. While
skipping 0.9 is not supported we intend to fix serious crashers caused
by such upgrades to prevent cluster outages.
I did a quick audit of the client package and everywhere else that
accesses AllocatedResources appears to be properly guarded by a nil
check.
Without a `LocalServicePort`, Connect services will try to use the
mapped port even when delivering traffic locally. A user can override
this behavior by pinning the port value in the `service` stanza but
this prevents us from using the Consul service name to reach the
service.
This commits configures the Consul proxy with its `LocalServicePort`
and `LocalServiceAddress` fields.
In Nomad prior to Consul Connect, all Consul checks work the same
except for Script checks. Because the Task being checked is running in
its own container namespaces, the check is executed by Nomad in the
Task's context. If the Script check passes, Nomad uses the TTL check
feature of Consul to update the check status. This means in order to
run a Script check, we need to know what Task to execute it in.
To support Consul Connect, we need Group Services, and these need to
be registered in Consul along with their checks. We could push the
Service down into the Task, but this doesn't work if someone wants to
associate a service with a task's ports, but do script checks in
another task in the allocation.
Because Nomad is handling the Script check and not Consul anyways,
this moves the script check handling into the task runner so that the
task runner can own the script check's configuration and
lifecycle. This will allow us to pass the group service check
configuration down into a task without associating the service itself
with the task.
When tasks are checked for script checks, we walk back through their
task group to see if there are script checks associated with the
task. If so, we'll spin off script check tasklets for them. The
group-level service and any restart behaviors it needs are entirely
encapsulated within the group service hook.
Consul registers Connect services automatically, however Nomad thinks it
owns them due to the _nomad prefix. Since the services are managed by
Consul, Nomad needs to explicitly ignore them or otherwies they will be
removed.
* adds meta object to service in job spec, sends it to consul
* adds tests for service meta
* fix tests
* adds docs
* better hashing for service meta, use helper for copying meta when registering service
* tried to be DRY, but looks like it would be more work to use the
helper function
Fixes#6041
Unlike all other Consul operations, boostrapping requires Consul be
available. This PR tries Consul 3 times with a backoff to account for
the group services being asynchronously registered with Consul.
Fixes#5395
Alternative to #5957
Make task restarting asynchronous when handling check-based restarts.
This matches the pre-0.9 behavior where TaskRunner.Restart was an
asynchronous signal. The check-based restarting code was not designed
to handle blocking in TaskRunner.Restart. 0.9 made it reentrant and
could easily overwhelm the buffered update chan and deadlock.
Many thanks to @byronwolfman for his excellent debugging, PR, and
reproducer!
I created this alternative as changing the functionality of
TaskRunner.Restart has a much larger impact. This approach reverts to
old known-good behavior and minimizes the number of places changes are
made.
When a nomad client restarts/upgraded, nomad restores state from running
task and starts the sync loop. If sync loop runs early, it may
deregister services from Consul prematurely even when Consul has the
running service as healthy.
This is not ideal, as re-registering the service means potentially
waiting a whole service health check interval before declaring the
service healthy.
We attempt to mitigate this by introducing an initialization probation
period. During this time, we only deregister services and checks that
were explicitly deregistered, and leave unrecognized ones alone. This
serves as a grace period for restoring to complete, or for operators to
restore should they recognize they restored with the wrong nomad data
directory.
It is possible to provide multiple identically named services with
different port assignments in a Nomad configuration.
We introduced a regression when migrating to stable service identifiers where
multiple services with the same name would conflict, and the last definition
would take precedence.
This commit includes the port label in the stable service identifier to
allow the previous behaviour where this was supported, for example
providing:
```hcl
service {
name = "redis-cache"
tags = ["global", "cache"]
port = "db"
check {
name = "alive"
type = "tcp"
interval = "10s"
timeout = "2s"
}
}
service {
name = "redis-cache"
tags = ["global", "foo"]
port = "foo"
check {
name = "alive"
type = "tcp"
port = "db"
interval = "10s"
timeout = "2s"
}
}
service {
name = "redis-cache"
tags = ["global", "bar"]
port = "bar"
check {
name = "alive"
type = "tcp"
port = "db"
interval = "10s"
timeout = "2s"
}
}
```
in a nomad task definition is now completely valid. Each service
definition with the same name must still have a unique port label however.
This commit causes sync to skip deregistering checks that are not
managed by nomad, such as service maintenance mode checks. This is
handled in the same way as service registrations - by doing a Nomad
specific prefix match.
The current implementation of Service Registration uses a hash of the
nomad-internal state of a service to register it with Consul, this means that
any update to the service invalidates this name and we then deregister, and
recreate the service in Consul.
While this behaviour slightly simplifies reasoning about service registration,
this becomes problematic when we add consul health checks to a service. When
the service is re-registered, so are the checks, which default to failing for
at least one check period.
This commit migrates us to using a stable identifier based on the
allocation, task, and service identifiers, and uses the difference
between the remote and local state to decide when to push updates.
It uses the existing hashing mechanic to decide when UpdateTask should
regenerate service registrations for providing to Sync, but this should
be removable as part of a future refactor.
It additionally introduces the _nomad-check- prefix for check
definitions, to allow for future allowing of consul features like
maintenance mode.
