Namespaces are set-up in Nomad to be an object that has an id property.
However, namespaces actually don't have that shape. Our search was expecting
a namespace object, but we actually don't have a namespace assigned to jobs
in our config and namespace is set to null. Normally, these namespaces would
be set to default, but that would require us to refactor our Mirage config
if we wanted to assert that namespaces are 'default' and not null. So this is
a bandaid solution.
* ui: add parameterized dispatch interface
This commit adds a new interface for dispatching parameteried jobs, if
the user has the right permissions. The UI can be accessed by viewing a
parameterized job and clicking on the "Dispatch Job" button located in
the "Job Launches" section.
* fix failing lint test
* clean up dispatch and remove meta
This commit cleans up a few things that had typos and
inconsistent naming. In line with this, the custom
`meta` view was removed in favor of using the
included `AttributesTable`.
* ui: encode dispatch job payload and start adding tests
* ui: remove unused test imports
* ui: redesign job dispatch form
* ui: initial acceptance tests for dispatch job
* ui: generate parameterized job children with correct id format
* ui: fix job dispatch breadcrumb link
* ui: refactor job dispatch component into glimmer component and add form validation
* ui: remove unused CSS class
* ui: align job dispatch button
* ui: handle namespace-specific requests on job dispatch
* ui: rename payloadMissing to payloadHasError
* ui: don't re-fetch job spec on dispatch job
* ui: keep overview tab selected on job dispatch page
* ui: fix task and task-group linting
* ui: URL encode job id on dispatch job tests
* ui: fix error when job meta is null
* ui: handle job dispatch from adapter
* ui: add more tests for dispatch job page
* ui: add "job dispatch" capability check
* ui: update job dispatch from code review
Co-authored-by: Luiz Aoqui <luiz@hashicorp.com>
In job versions, if you have an ACL token with a write policy
you should be able to revert a job, however, that was not the
case here. This is because we're using ember-can to check if
the user can run a job. That permission relies on policiesSupportRunning
which uses a function called namespaceIncludesCapability. We're going to
need to refactor any cases that use this function.
We wanted the ability to get our namespace from query params
in order to do this, we're using additional attributes via
ember-can to set a bound property directly from our
handlebar file. This sets us up better in the event that
the namespace filter changes on the UI because our handlebar
file will be aware of the change, whereas our ability may not
update as the namespace filter updates.
This commit adds a serializer for the Agent. When the factory was originally
designed to have the Member properities directly on the Agent class which was
not set-up properly technically, but since we didn't really make use of the
Agent endpoint.
This PR edits the computed agent version that is returned upon hitting
the agent self request endpoint. The reason is because we believe that
the Agent Member Tag property sometimes returns null because we may have
cases where there are only clients and no servers and only servers are
included in the Serf Gossip Protocol. There may be other cases where we
do in fact have servers but the node is erased for some reason. We are
unsure how to replicate that issue, however.
edit mirage config
This commit updates the Mirage Config because our acceptance tests
depend on the Mirage Config, while we rely on Mirage Factories to
populate fixture data for us to use when to run the Nomad UI locally
Revert "update the open-button disability functionality depending on a job's state"
This reverts commit 5190b308a51d55a7b0617854164c155d36d7e513.
This closes#10513, thanks to @bastelfreak for the report.
GET /status/leader returns an IPv6 host with square brackets
around the IP address as expected, but the rpcAddr property
on the agent model does not.
This fixes rpcAddr, updates the Mirage /status/leader mock
to properly format an IPv6 host, and changes the agent
factory to sometimes produce IPv6 addresses.
I added a formatHost utility function to centralise the
conditional square bracket-wrapping that would have
otherwise been further scattered around.
This rethinks namespaces as a filter on list pages rather than a global setting.
The biggest net-new feature here is being able to select All (*) to list all jobs
or CSI volumes across namespaces.
This is the first step in #10268. If a maximum is not specified, the
task group sum uses the memory number instead. The maximum is only
shown when it’s higher than the memory sum.
This updates the UI to use the new fuzzy search API. It’s a drop-in
replacement so the / shortcut to jump to search is preserved, and
results can be cycled through and chosen via arrow keys and the
enter key.
It doesn’t use everything returned by the API:
* deployments and evaluations: these match by id, doesn’t seem like
people would know those or benefit from quick navigation to them
* namespaces: doesn’t seem useful as they currently function
* scaling policies
* tasks: the response doesn’t include an allocation id, which means they
can’t be navigated to in the UI without an additional query
* CSI volumes: aren’t actually returned by the API
Since there’s no API to check the server configuration and know whether
the feature has been disabled, this adds another query in
route:application#beforeModel that acts as feature detection: if the
attempt to query fails (500), the global search field is hidden.
Upon having added another query on load, I realised that beforeModel was
being triggered any time service:router#transitionTo was being called,
which happens upon navigating to a search result, for instance, because
of refreshModel being present on the region query parameter. This PR
adds a check for transition.queryParamsOnly and skips rerunning the
onload queries (token permissions check, license check, fuzzy search
feature detection).
Implementation notes:
* there are changes to unrelated tests to ignore the on-load feature
detection query
* some lifecycle-related guards against undefined were required to
address failures when navigating to an allocation
* the minimum search length of 2 characters is hard-coded as there’s
currently no way to determine min_term_length in the UI
This adds a Revert two-step button to the JobVersions component for
not-current versions, which redirects to the overview on success. It
checks the job version before and after reversion to mitigate the edge
case where reverting to an otherwise-identical version has no effect, as
discussed in #10337.
It uses existing facilities for handling other errors and disabling the
button when permissions are lacking.
This followup to #10066 adds a step to clear the one-time token
from the URL after the application has loaded. The delay is
required for it to actually clear, but only when the OTT is present
to avoid slowing down the entire test suite.
This adds UI support for receiving the one-time token passed via query parameter, as in #10134
and related PRs, and exchanging it for its corresponding secret ID. When this works, it’s mostly
invisible, with a brief flash of the OTT onscreen.
The authentication failure message now suggests the -authenticate flag.
When OTT exchange fails, it shows a whole-page error.
This includes a known UX shortcoming in that the OTT will not disappear from the URL when an
identifier is specified on the command line, like nomad ui -authenticate jobname. The goal is to
address that shortcoming in a forthcoming pull request.
This closes#10146.
Because of cibernox/ember-power-select#1203, which documents
the current impossibility of attaching test selectors to a
PowerSelect invocation, this uses test selectors on parent
containers instead, occasionally adding wrappers when needed.
I chose to leave the existing test selectors in the hopes that
we can return to using them eventually, but I could easily
remove them if it seems like extra noise now.
Presumably for the same reason, @class no longer works, so
this adjusts the scoping of global search CSS to preserve the style
of the search control.
I also included an update to the latest version of
ember-test-selectors, since we were far behind and I tried
that before finding the aforelinked issue.
Finally, this replaces ember-cli-uglify with ember-cli-terser to address
production build failures as described at ember-cli/ember-cli#9290.
In addition to this computation being wasteful, it introduces a bug
where the allocation on a stats tracker can update twice in one render,
which isn't allowed in Glimmer (ironically, Glimmmer's lack of
auto-memoization introduced the issue).
- Sorting must be done on copies to preserve orders.
- Indices should be reversed since rendering is also reversed (the back
layer (the tallest) is rendered first to create the stacking effect).
This leverages the existing pre-processing being done in the
allocation-stats-tracker to also create additive percentages relative to
the allocation resources vs. the task resources.
This can then be used in a chart to create a stacked area representation
of consumption.
This binds a function to a target before passing it along to another
component. It's normal to expect to get to use `this` within functions
on components and controllers, but (sans actions) that doesn't happen
automatically.
Currently, PrimaryMetric is already overloaded on multiple dimensions:
metric and resource type.
This refactor will use multiple components as a form of control flow
instead spidering conditionals, which are only getting worse as the
charts for each resource type diverge.
As @backspace pointed out, we're processing a bunch of other stuff
anyway, so might as well process the active state there too where it's
more likely to be expected.
When a @dataProp is provided, the LineChart component assumes data is an
array of data series. It will map by the data prop and flatten to
compute the domains of the data.
With the Ember update, when the will-destroy action is called
to check the element height, its height is already zero. That
seems strange but I didn’t look into it any further, as
using did-insert to store the element lets us check its height
before any other actions when a processing button is pressed.
This doesn’t include Ember Data, as we are still back on 3.12.
Most changes are deprecation updates, linting fixes, and dependencies. It can
be read commit-by-commit, though many of them are mechanical and skimmable.
For the new linting exclusions, I’ve added them to the Tech Debt list.
The decrease in test count is because linting is no longer included in ember test.
There’s a new deprecation warning in the logs that can be fixed by updating Ember
Power Select but when I tried that it caused it to render incorrectly, so I decided to
ignore it for now and address it separately.
This closes#8744 and #9826.
It necessitated some customisation options for TwoStepButton. One is inlineText, which puts the confirmation text in the same line as the buttons. Also, there was a single-use configuration option named isInfoAction that I removed in favour of passing a set of class configuration options like this:
@classes={{hash
idleButton="is-warning"
confirmationMessage="inherit-color"
cancelButton="is-danger is-important"
confirmButton="is-warning"}}
This closes#7459.
While emoji don’t actually need escaping, expanding the
expression that enumerates all task name characters that
don’t need escaping to include emoji is prohibitive, since
it’s a discontinuous range. The emoji-regex project has
such an expression and it’s 12kB.
This fixes the regular expression to property escape emoji
as a single character instead of as its component bytes.
Thanks to @DingoEatingFuzz for the suggestion.
This closes#9966. It was looking at the query parameters
for the namespace and region, but allocation (and task!)
routes don’t have a namespace query parameter. Since the URL
generator requires the job for all calls, it makes sense to
extract the namespace and region from the job instead.
