Nomad 1.5.4 shipped with a logmon bug that we rolled out a fix for in Nomad
1.5.5. Unfortunately we can't yank the release but we should leave a note in the
upgrade guide telling users to avoid it.
When the server restarts for the upgrade, it loads the `structs.Job` from the
Raft snapshot/logs. The jobspec has long since been parsed, so none of the
guards around the default value are in play. The empty field value for `Enabled`
is the zero value, which is false.
This doesn't impact any running allocation because we don't replace running
allocations when either the client or server restart. But as soon as any
allocation gets rescheduled (ex. you drain all your clients during upgrades),
it'll be using the `structs.Job` that the server has, which has `Enabled =
false`, and logs will not be collected.
This changeset fixes the bug by adding a new field `Disabled` which defaults to
false (so that the zero value works), and deprecates the old field.
Fixes#17076
* docs: move CNI reference plugins installation to CNI overview page
This PR moves the instruction steps for install the CNI reference plugins
from the Consul Mesh integration page to the general Networking CNI page.
These plugins are required for bridge networking, not just Consul Mesh,
so it makes sense to have them on the general CNI page.
Closes#17038
* docs: fix a link to post install steps
This PR modifies references to the envoyproxy/envoy docker image to
explicitly include the docker.io prefix. This does not affect existing
users, but makes things easier for Podman users, who otherwise need to
specify the full name because Podman does not default to docker.io
Some Nomad users ship application logs out-of-band via syslog. For these users
having `logmon` (and `docker_logger`) running is unnecessary overhead. Allow
disabling the logmon and pointing the task's stdout/stderr to /dev/null.
This changeset is the first of several incremental improvements to log
collection short of full-on logging plugins. The next step will likely be to
extend the internal-only task driver configuration so that cluster
administrators can turn off log collection for the entire driver.
---
Fixes: #11175
Co-authored-by: Thomas Weber <towe75@googlemail.com>
Adds a new configuration to clients to optionally allow them to drain their
workloads on shutdown. The client sends the `Node.UpdateDrain` RPC targeting
itself and then monitors the drain state as seen by the server until the drain
is complete or the deadline expires. If it loses connection with the server, it
will monitor local client status instead to ensure allocations are stopped
before exiting.
The `-deadline` and `-force` flag for the `nomad node drain` command only cause
the draining to ignore the `migrate` block's healthy deadline, max parallel,
etc. These flags don't have anything to do with the `kill_timeout` or
`shutdown_delay` options of the jobspec.
This changeset fixes the skipped E2E tests so that they validate the intended
behavior, and updates the docs for more clarity.
* api: enable support for setting original source alongside job
This PR adds support for setting job source material along with
the registration of a job.
This includes a new HTTP endpoint and a new RPC endpoint for
making queries for the original source of a job. The
HTTP endpoint is /v1/job/<id>/submission?version=<version> and
the RPC method is Job.GetJobSubmission.
The job source (if submitted, and doing so is always optional), is
stored in the job_submission memdb table, separately from the
actual job. This way we do not incur overhead of reading the large
string field throughout normal job operations.
The server config now includes job_max_source_size for configuring
the maximum size the job source may be, before the server simply
drops the source material. This should help prevent Bad Things from
happening when huge jobs are submitted. If the value is set to 0,
all job source material will be dropped.
* api: avoid writing var content to disk for parsing
* api: move submission validation into RPC layer
* api: return an error if updating a job submission without namespace or job id
* api: be exact about the job index we associate a submission with (modify)
* api: reword api docs scheduling
* api: prune all but the last 6 job submissions
* api: protect against nil job submission in job validation
* api: set max job source size in test server
* api: fixups from pr
The `ephemeral_disk` block's `migrate` field allows for best-effort migration of
the ephemeral disk data to new nodes. The documentation says the `migrate` field
is only respected if `sticky=true`, but in fact if client ACLs are not set the
data is migrated even if `sticky=false`.
The existing behavior when client ACLs are disabled has existed since the early
implementation, so "fixing" that case now would silently break backwards
compatibility. Additionally, having `migrate` not imply `sticky` seems
nonsensical: it suggests that if we place on a new node we migrate the data but
if we place on the same node, we throw the data away!
Update so that `migrate=true` implies `sticky=true` as follows:
* The failure mode when client ACLs are enabled comes from the server not passing
along a migration token. Update the server so that the server provides a
migration token whenever `migrate=true` and not just when `sticky=true` too.
* Update the scheduler so that `migrate` implies `sticky`.
* Update the client so that we check for `migrate || sticky` where appropriate.
* Refactor the E2E tests to move them off the old framework and make the intention
of the test more clear.
The vSphere plugin is exclusive to k8s because it relies on k8s-APIs (and
crashes without them being present). Upstream unfortunately will not support
Nomad, so we shouldn't refer to it in our concept docs here.
This update changes the behaviour when following logs from an
allocation, so that both stdout and stderr files streamed when the
operator supplies the follow flag. The previous behaviour is held
when all other flags and situations are provided.
Co-authored-by: Luiz Aoqui <luiz@hashicorp.com>
The workflow described in the docs for apt installation is deprecated. Update to
match the workflow described in the Tutorials and official packaging guide.
The `docker` driver cannot expand capabilities beyond the default set when the
task is a non-root user. Clarify this in the documentation of `allow_caps` and
update the `cap_add` and `cap_drop` to match the `exec` driver, which has more
clear language overall.
When cluster administrators restore from Raft snapshot, they also need to ensure the
keyring is in place. For on-prem users doing in-place upgrades this is less of a
concern but for typical cloud workflows where the whole host is replaced, it's
an important warning (at least until #14852 has been implemented).
The configuration docs for `client.template.vault_retry`, `consul_retry`, and
`nomad_retry` incorrectly document the default number of attempts to be
unlimited (0). When we added these config blocks, we defaulted the fields to
`nil` for backwards compatibility, which causes them to fall back to the default
consul-template configuration values.
Implement the new `nomad job restart` command that allows operators to
restart allocations tasks or reschedule then entire allocation.
Restarts can be batched to target multiple allocations in parallel.
Between each batch the command can stop and hold for a predefined time
or until the user confirms that the process should proceed.
This implements the "Stateless Restarts" alternative from the original
RFC
(https://gist.github.com/schmichael/e0b8b2ec1eb146301175fd87ddd46180).
The original concept is still worth implementing, as it allows this
functionality to be exposed over an API that can be consumed by the
Nomad UI and other clients. But the implementation turned out to be more
complex than we initially expected so we thought it would be better to
release a stateless CLI-based implementation first to gather feedback
and validate the restart behaviour.
Co-authored-by: Shishir Mahajan <smahajan@roblox.com>
* Added and flag to command
* cli[style]: small refactor to avoid confussion with tmpl variable
* Update inspect.mdx
* cli: add changelog entry
* Update .changelog/16478.txt
Co-authored-by: James Rasell <jrasell@users.noreply.github.com>
* Update command/quota_inspect.go
Co-authored-by: James Rasell <jrasell@users.noreply.github.com>
---------
Co-authored-by: James Rasell <jrasell@users.noreply.github.com>
* cli: add json and t flags to quota status command
* cli: add entry to changelog
* Update command/quota_status.go
Co-authored-by: James Rasell <jrasell@users.noreply.github.com>
---------
Co-authored-by: James Rasell <jrasell@users.noreply.github.com>
* cli: Add and flags to server members
* Update website/content/docs/commands/server/members.mdx
Co-authored-by: James Rasell <jrasell@users.noreply.github.com>
* Update website/content/docs/commands/server/members.mdx
Co-authored-by: James Rasell <jrasell@users.noreply.github.com>
* cli: update the server memebers tests to use must
* cli: add flags addition to changelog
---------
Co-authored-by: James Rasell <jrasell@users.noreply.github.com>
nomad login command does not need to know ACL Auth Method's type, since all
method names are unique.
Co-authored-by: James Rasell <jrasell@users.noreply.github.com>
* docs: dispatch_payload docs had some weirdness
Docs said "Examples" when there was only 1 example. Not sure what the
floating "to" in the description was for.
* docs: missing a heading level on jobs api docs
