* scheduler: allow updates after alloc reconnects
When an allocation reconnects to a cluster the scheduler needs to run
special logic to handle the reconnection, check if a replacement was
create and stop one of them.
If the allocation kept running while the node was disconnected, it will
be reconnected with `ClientStatus: running` and the node will have
`Status: ready`. This combination is the same as the normal steady state
of allocation, where everything is running as expected.
In order to differentiate between the two states (an allocation that is
reconnecting and one that is just running) the scheduler needs an extra
piece of state.
The current implementation uses the presence of a
`TaskClientReconnected` task event to detect when the allocation has
reconnected and thus must go through the reconnection process. But this
event remains even after the allocation is reconnected, causing all
future evals to consider the allocation as still reconnecting.
This commit changes the reconnect logic to use an `AllocState` to
register when the allocation was reconnected. This provides the
following benefits:
- Only a limited number of task states are kept, and they are used for
many other events. It's possible that, upon reconnecting, several
actions are triggered that could cause the `TaskClientReconnected`
event to be dropped.
- Task events are set by clients and so their timestamps are subject
to time skew from servers. This prevents using time to determine if
an allocation reconnected after a disconnect event.
- Disconnect events are already stored as `AllocState` and so storing
reconnects there as well makes it the only source of information
required.
With the new logic, the reconnection logic is only triggered if the
last `AllocState` is a disconnect event, meaning that the allocation has
not been reconnected yet. After the reconnection is handled, the new
`ClientStatus` is store in `AllocState` allowing future evals to skip
the reconnection logic.
* scheduler: prevent spurious placement on reconnect
When a client reconnects it makes two independent RPC calls:
- `Node.UpdateStatus` to heartbeat and set its status as `ready`.
- `Node.UpdateAlloc` to update the status of its allocations.
These two calls can happen in any order, and in case the allocations are
updated before a heartbeat it causes the state to be the same as a node
being disconnected: the node status will still be `disconnected` while
the allocation `ClientStatus` is set to `running`.
The current implementation did not handle this order of events properly,
and the scheduler would create an unnecessary placement since it
considered the allocation was being disconnected. This extra allocation
would then be quickly stopped by the heartbeat eval.
This commit adds a new code path to handle this order of events. If the
node is `disconnected` and the allocation `ClientStatus` is `running`
the scheduler will check if the allocation is actually reconnecting
using its `AllocState` events.
* rpc: only allow alloc updates from `ready` nodes
Clients interact with servers using three main RPC methods:
- `Node.GetAllocs` reads allocation data from the server and writes it
to the client.
- `Node.UpdateAlloc` reads allocation from from the client and writes
them to the server.
- `Node.UpdateStatus` writes the client status to the server and is
used as the heartbeat mechanism.
These three methods are called periodically by the clients and are done
so independently from each other, meaning that there can't be any
assumptions in their ordering.
This can generate scenarios that are hard to reason about and to code
for. For example, when a client misses too many heartbeats it will be
considered `down` or `disconnected` and the allocations it was running
are set to `lost` or `unknown`.
When connectivity is restored the to rest of the cluster, the natural
mental model is to think that the client will heartbeat first and then
update its allocations status into the servers.
But since there's no inherit order in these calls the reverse is just as
possible: the client updates the alloc status and then heartbeats. This
results in a state where allocs are, for example, `running` while the
client is still `disconnected`.
This commit adds a new verification to the `Node.UpdateAlloc` method to
reject updates from nodes that are not `ready`, forcing clients to
heartbeat first. Since this check is done server-side there is no need
to coordinate operations client-side: they can continue sending these
requests independently and alloc update will succeed after the heartbeat
is done.
* chagelog: add entry for #15068
* code review
* client: skip terminal allocations on reconnect
When the client reconnects with the server it synchronizes the state of
its allocations by sending data using the `Node.UpdateAlloc` RPC and
fetching data using the `Node.GetClientAllocs` RPC.
If the data fetch happens before the data write, `unknown` allocations
will still be in this state and would trigger the
`allocRunner.Reconnect` flow.
But when the server `DesiredStatus` for the allocation is `stop` the
client should not reconnect the allocation.
* apply more code review changes
* scheduler: persist changes to reconnected allocs
Reconnected allocs have a new AllocState entry that must be persisted by
the plan applier.
* rpc: read node ID from allocs in UpdateAlloc
The AllocUpdateRequest struct is used in three disjoint use cases:
1. Stripped allocs from clients Node.UpdateAlloc RPC using the Allocs,
and WriteRequest fields
2. Raft log message using the Allocs, Evals, and WriteRequest fields
3. Plan updates using the AllocsStopped, AllocsUpdated, and Job fields
Adding a new field that would only be used in one these cases (1) made
things more confusing and error prone. While in theory an
AllocUpdateRequest could send allocations from different nodes, in
practice this never actually happens since only clients call this method
with their own allocations.
* scheduler: remove logic to handle exceptional case
This condition could only be hit if, somehow, the allocation status was
set to "running" while the client was "unknown". This was addressed by
enforcing an order in "Node.UpdateStatus" and "Node.UpdateAlloc" RPC
calls, so this scenario is not expected to happen.
Adding unnecessary code to the scheduler makes it harder to read and
reason about it.
* more code review
* remove another unused test
* scheduler: Fix bug where the scheduler would treat multiregion jobs as paused for job types that don't use deployments
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Log lines which include an error should use the full term "error"
as the context key. This provides consistency across the codebase
and avoids a Go style which operators might not be aware of.
* planner: expose ServerMeetsMinimumVersion via Planner interface
* filterByTainted: add flag indicating disconnect support
* allocReconciler: accept and pass disconnect support flag
* tests: update dependent tests
The allocReconciler's computeGroup function contained a significant amount of inline logic that was difficult to understand the intent of. This commit extracts inline logic into the following intention revealing subroutines. It also includes updates to the function internals also aimed at improving maintainability and renames some existing functions for the same purpose. New or renamed functions include.
Renamed functions
- handleGroupCanaries -> cancelUnneededCanaries
- handleDelayedLost -> createLostLaterEvals
- handeDelayedReschedules -> createRescheduleLaterEvals
New functions
- filterAndStopAll
- initializeDeploymentState
- requiresCanaries
- computeCanaries
- computeUnderProvisionedBy
- computeReplacements
- computeDestructiveUpdates
- computeMigrations
- createDeployment
- isDeploymentComplete
* Fixed name of `nomad.scheduler.allocs.reschedule` metric
* Added new metrics to metrics reference documentation
* Expanded definitions of "waiting" metrics
* Changelog entry for #10236 and #10237
This change modifies the Nomad job register and deregister RPCs to
accept an updated option set which includes eval priority. This
param is optional and override the use of the job priority to set
the eval priority.
In order to ensure all evaluations as a result of the request use
the same eval priority, the priority is shared to the
allocReconciler and deploymentWatcher. This creates a new
distinction between eval priority and job priority.
The Nomad agent HTTP API has been modified to allow setting the
eval priority on job update and delete. To keep consistency with
the current v1 API, job update accepts this as a payload param;
job delete accepts this as a query param.
Any user supplied value is validated within the agent HTTP handler
removing the need to pass invalid requests to the server.
The register and deregister opts functions now all for setting
the eval priority on requests.
The change includes a small change to the DeregisterOpts function
which handles nil opts. This brings the function inline with the
RegisterOpts.
Add a new driver capability: RemoteTasks.
When a task is run by a driver with RemoteTasks set, its TaskHandle will
be propagated to the server in its allocation's TaskState. If the task
is replaced due to a down node or draining, its TaskHandle will be
propagated to its replacement allocation.
This allows tasks to be scheduled in remote systems whose lifecycles are
disconnected from the Nomad node's lifecycle.
See https://github.com/hashicorp/nomad-driver-ecs for an example ECS
remote task driver.
The change was intended to fix a case where a canary alloc may fail to
be rescheduled if all the other allocs fail as well (e.g. if all allocs
happen to be placed on a node that died). However, it introduced some
unintended side-effects.
Reverting the change for now and will investigate further.
This change fixes a bug where lost/failed allocations are replaced by
allocations with the latest versions, even if the version hasn't been
promoted yet.
Now, when generating a plan for lost/failed allocations, the scheduler
first checks if the current deployment is in Canary stage, and if so, it
ensures that any lost/failed allocations is replaced one with the latest
promoted version instead.
The reconcile loop sets `DeploymentState.DesiredCanaries` only on the first
pass through the loop and if the job is not paused/pending. In MRD,
deployments will make one pass though the loop while "pending", and were not
ever getting `DesiredCanaries` set. We can't set it in the initial
`DeploymentState` constructor because the first pass through setting up
canaries expects it's not there yet. However, this value is static for a given
version of a job because it's coming from the update stanza, so it's safe to
re-assign the value on subsequent passes.
The field name `Deployment.TaskGroups` contains a map of `DeploymentState`,
which makes it a little harder to follow state updates when combined with
inconsistent naming conventions, particularly when we also have the state
store or actual `TaskGroup`s in scope. This changeset changes all uses to
`dstate` so as not to be confused with actual TaskGroups.
If a job update includes a task group that has no changes, those allocations
have their version bumped in-place. The ends up triggering an eval from
`deploymentwatcher` when it verifies their health. Although this eval is a
no-op, we were only treating pending deployments the same as paused when
the deployment was a new MRD. This means that any eval after the initial one
will kick off the deployment, and that caused pending deployments to "jump
the queue" and run ahead of schedule, breaking MRD invariants and resulting in
a state with all regions blocked.
This behavior can be replicated even in the case of job updates with no
in-place updates by patching `deploymentwatcher` to inject a spurious no-op
eval. This changeset fixes the behavior by treating pending deployments the
same as paused in all cases in the reconciler.
Deployments should wait until kicked off by `Job.Register` so that we can
assert that all regions have a scheduled deployment before starting any
region. This changeset includes the OSS fixes to support the ENT work.
`IsMultiregionStarter` has no more callers in OSS, so remove it here.
Pre-0.12.0 beta, a deployment was considered "complete" if it was
successful. But with MRD we have "blocked" and "unblocking" states as well. We
did not consider the case where a concurrent alloc health status update
triggers a `Compute` call on a deployment that's moved from "blocked" to
"unblocking" (it's a small window), which caused an extra pass thru the
`nextRegion` logic in `deploymentwatcher` and triggered an error when later
transitioning to "successful".
This changeset makes sure we don't overwrite that status.
In #8209 we fixed the `max_parallel` stanza for multiregion by introducing the
`IsMultiregionStarter` check, but didn't apply it to the earlier place its
required. The result is that deployments start but don't place allocations.
If `max_parallel` is not set, all regions should begin in a `running` state
rather than a `pending` state. Otherwise the first region is set to `running`
and then all the remaining regions once it enters `blocked. That behavior is
technically correct in that we have at most `max_parallel` regions running,
but definitely not what a user expects.
The `paused` state is used as an operator safety mechanism, so that they can
debug a deployment or halt one that's causing a wider failure. By using the
`paused` state as the first state of a multiregion deployment, we risked
resuming an intentionally operator-paused deployment because of activity in a
peer region.
This changeset replaces the use of the `paused` state with a `pending` state,
and provides a `Deployment.Run` internal RPC to replace the use of the
`Deployment.Pause` (resume) RPC we were using in `deploymentwatcher`.
* `nextRegion` should take status parameter
* thread Deployment/Job RPCs thru `nextRegion`
* add `nextRegion` calls to `deploymentwatcher`
* use a better description for paused for peer
* scheduler/reconcile: set FollowupEvalID on lost stop_after_client_disconnect
* scheduler/reconcile: thread follupEvalIDs through to results.stop
* scheduler/reconcile: comment typo
* nomad/_test: correct arguments for plan.AppendStoppedAlloc
* scheduler/reconcile: avoid nil, cleanup handleDelayed(Lost|Reschedules)
* client/heartbeatstop: reversed time condition for startup grace
* scheduler/generic_sched: use `delayInstead` to avoid a loop
Without protecting the loop that creates followUpEvals, a delayed eval
is allowed to create an immediate subsequent delayed eval. For both
`stop_after_client_disconnect` and the `reschedule` block, a delayed
eval should always produce some immediate result (running or blocked)
and then only after the outcome of that eval produce a second delayed
eval.
* scheduler/reconcile: lostLater are different than delayedReschedules
Just slightly. `lostLater` allocs should be used to create batched
evaluations, but `handleDelayedReschedules` assumes that the
allocations are in the untainted set. When it creates the in-place
updates to those allocations at the end, it causes the allocation to
be treated as running over in the planner, which causes the initial
`stop_after_client_disconnect` evaluation to be retried by the worker.
* jobspec, api: add stop_after_client_disconnect
* nomad/state/state_store: error message typo
* structs: alloc methods to support stop_after_client_disconnect
1. a global AllocStates to track status changes with timestamps. We
need this to track the time at which the alloc became lost
originally.
2. ShouldClientStop() and WaitClientStop() to actually do the math
* scheduler/reconcile_util: delayByStopAfterClientDisconnect
* scheduler/reconcile: use delayByStopAfterClientDisconnect
* scheduler/util: updateNonTerminalAllocsToLost comments
This was setup to only update allocs to lost if the DesiredStatus had
already been set by the scheduler. It seems like the intention was to
update the status from any non-terminal state, and not all lost allocs
have been marked stop or evict by now
* scheduler/testing: AssertEvalStatus just use require
* scheduler/generic_sched: don't create a blocked eval if delayed
* scheduler/generic_sched_test: several scheduling cases
When an alloc is due to be rescheduleLater, it goes through the
reconciler twice: once to be ignored with a follow up evals, and once
again when processing the follow up eval where they appear as
rescheduleNow.
Here, we ignore them in the first run and mark them as stopped in second
iteration; rather than stop them twice.
Currently, when an alloc fails and is rescheduled, the alloc desired
state remains as "run" and the nomad client may not free the resources.
Here, we ensure that an alloc is marked as stopped when it's
rescheduled.
Notice the Desired Status and Description before and after this change:
Before:
```
mars-2:nomad notnoop$ nomad alloc status 02aba49e
ID = 02aba49e
Eval ID = bb9ed1d2
Name = example-reschedule.nodes[0]
Node ID = 5853d547
Node Name = mars-2.local
Job ID = example-reschedule
Job Version = 0
Client Status = failed
Client Description = Failed tasks
Desired Status = run
Desired Description = <none>
Created = 10s ago
Modified = 5s ago
Replacement Alloc ID = d6bf872b
Task "payload" is "dead"
Task Resources
CPU Memory Disk Addresses
0/100 MHz 24 MiB/300 MiB 300 MiB
Task Events:
Started At = 2019-06-06T21:12:45Z
Finished At = 2019-06-06T21:12:50Z
Total Restarts = 0
Last Restart = N/A
Recent Events:
Time Type Description
2019-06-06T17:12:50-04:00 Not Restarting Policy allows no restarts
2019-06-06T17:12:50-04:00 Terminated Exit Code: 1
2019-06-06T17:12:45-04:00 Started Task started by client
2019-06-06T17:12:45-04:00 Task Setup Building Task Directory
2019-06-06T17:12:45-04:00 Received Task received by client
```
After:
```
ID = 5001ccd1
Eval ID = 53507a02
Name = example-reschedule.nodes[0]
Node ID = a3b04364
Node Name = mars-2.local
Job ID = example-reschedule
Job Version = 0
Client Status = failed
Client Description = Failed tasks
Desired Status = stop
Desired Description = alloc was rescheduled because it failed
Created = 13s ago
Modified = 3s ago
Replacement Alloc ID = 7ba7ac20
Task "payload" is "dead"
Task Resources
CPU Memory Disk Addresses
21/100 MHz 24 MiB/300 MiB 300 MiB
Task Events:
Started At = 2019-06-06T21:22:50Z
Finished At = 2019-06-06T21:22:55Z
Total Restarts = 0
Last Restart = N/A
Recent Events:
Time Type Description
2019-06-06T17:22:55-04:00 Not Restarting Policy allows no restarts
2019-06-06T17:22:55-04:00 Terminated Exit Code: 1
2019-06-06T17:22:50-04:00 Started Task started by client
2019-06-06T17:22:50-04:00 Task Setup Building Task Directory
2019-06-06T17:22:50-04:00 Received Task received by client
```
This PR changes behavior of the scheduler such that a task group with a
deployment that is failed or paused will not cause the scheduler to skip
migrations.
The reason for this change is that it causes a bad UX when draining
nodes with allocations that are part of a failed/paused deployment.
These operations should not be coupled in any way and this remedies
that.
Prior behavior was still correct, but required either jobs to
transistion to a healthy state or for the node to hit its drain
deadline.
