Fixes#10200
**The bug**
A user reported receiving the following error when an alloc was placed
that needed to preempt existing allocs:
```
[ERROR] client.alloc_watcher: error querying previous alloc:
alloc_id=28... previous_alloc=8e... error="rpc error: alloc lookup
failed: index error: UUID must be 36 characters"
```
The previous alloc (8e) was already complete on the client. This is
possible if an alloc stops *after* the scheduling decision was made to
preempt it, but *before* the node running both allocations was able to
pull and start the preemptor. While that is hopefully a narrow window of
time, you can expect it to occur in high throughput batch scheduling
heavy systems.
However the RPC error made no sense! `previous_alloc` in the logs was a
valid 36 character UUID!
**The fix**
The fix is:
```
- prevAllocID: c.Alloc.PreviousAllocation,
+ prevAllocID: watchedAllocID,
```
The alloc watcher new func used for preemption improperly referenced
Alloc.PreviousAllocation instead of the passed in watchedAllocID. When
multiple allocs are preempted, a watcher is created for each with
watchedAllocID set properly by the caller. In this case
Alloc.PreviousAllocation="" -- which is where the `UUID must be 36 characters`
error was coming from! Sadly we were properly referencing
watchedAllocID in the log, so it made the error make no sense!
**The repro**
I was able to reproduce this with a dev agent with [preemption enabled](https://gist.github.com/schmichael/53f79cbd898afdfab76865ad8c7fc6a0#file-preempt-hcl)
and [lowered limits](https://gist.github.com/schmichael/53f79cbd898afdfab76865ad8c7fc6a0#file-limits-hcl)
for ease of repro.
First I started a [low priority count 3 job](https://gist.github.com/schmichael/53f79cbd898afdfab76865ad8c7fc6a0#file-preempt-lo-nomad),
then a [high priority job](https://gist.github.com/schmichael/53f79cbd898afdfab76865ad8c7fc6a0#file-preempt-hi-nomad)
that evicts 2 low priority jobs. Everything worked as expected.
However if I force it to use the [remotePrevAlloc implementation](https://github.com/hashicorp/nomad/blob/v1.3.0-beta.1/client/allocwatcher/alloc_watcher.go#L147),
it reproduces the bug because the watcher references PreviousAllocation
instead of watchedAllocID.
We enforce exactly one plugin supervisor loop by checking whether
`running` is set and returning early. This works but is fairly
subtle. It can briefly result in two goroutines where one quickly
exits before doing any work. Clarify the intent by using
`sync.Once`. The goroutine we've spawned only exits when the entire
task runner is being torn down, and not when the task driver restarts
the workload, so it should never be re-run.
The task runner hook `Prestart` response object includes a `Done`
field that's intended to tell the client not to run the hook
again. The plugin supervisor creates mount points for the task during
prestart and saves these mounts in the hook resources. But if a client
restarts the hook resources will not be populated. If the plugin task
restarts at any time after the client restarts, it will fail to have
the correct mounts and crash loop until restart attempts run out.
Fix this by not returning `Done` in the response, just as we do for
the `volume_mount_hook`.
This PR introduces the `address` field in the `service` block so that Nomad
or Consul services can be registered with a custom `.Address.` to advertise.
The address can be an IP address or domain name. If the `address` field is
set, the `service.address_mode` must be set in `auto` mode.
* add concurrent download support - resolves#11244
* format imports
* mark `wg.Done()` via `defer`
* added tests for successful and failure cases and resolved some goleak
* docs: add changelog for #11531
* test typo fixes and improvements
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
This PR is 2 fixes for the flaky TestTaskRunner_TaskEnv_Chroot test.
And also the TestTaskRunner_Download_ChrootExec test.
- Use TinyChroot to stop copying gigabytes of junk, which causes GHA
to fail to create the environment in time.
- Pre-create cgroups on V2 systems. Normally the cgroup directory is
managed by the cpuset manager, but that is not active in taskrunner tests,
so create it by hand in the test framework.
These tests have a data race where the test assertion is reading a
value that's being set in the `listenFunc` goroutines that are
subscribing to registry update events. Move the assertion into the
subscribing goroutine to remove the race. This bug was discovered
in #12098 but does not impact production Nomad code.
The plugin manager for CSI hands out instances of a plugin for callers
that need to mount a volume. The `MounterForPlugin` method accesses
the internal instances map without a lock, and can be called
concurrently from outside the plugin manager's main run-loop.
The original commit for the instances map included a warning that it
needed to be accessed only from the main loop but that comment was
unfortunately ignored shortly thereafter, so this bug has existed in
the code for a couple years without being detected until we ran tests
with `-race` in #12098. Lesson learned here: comments make for lousy
enforcement of invariants!
This PR injects the 'NOMAD_CPU_CORES' environment variable into
tasks that have been allocated reserved cpu cores. The value uses
normal cpuset notation, as found in cpuset.cpu cgroup interface files.
Note this value is not necessiarly the same as the content of the actual
cpuset.cpus interface file, which will also include shared cpu cores when
using cgroups v2. This variable is a workaround for users who used to be
able to read the reserved cgroup cpuset file, but lose the information
about distinct reserved cores when using cgroups v2.
Side discussion in: https://github.com/hashicorp/nomad/issues/12374
When a service is updated, the service hooks update a number of
internal fields which helps generate the new workload. This also
needs to update the namespace for the service provider. It is
possible for these to be different, and in the case of Nomad and
Consul running OSS, this is to be expected.
This change modifies the template task runner to utilise the
new consul-template which includes Nomad service lookup template
funcs.
In order to provide security and auth to consul-template, we use
a custom HTTP dialer which is passed to consul-template when
setting up the runner. This method follows Vault implementation.
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
When we unmount a volume we need to be able to recover from cases
where the plugin has been shutdown before the allocation that needs
it, so in #11892 we blocked shutting down the alloc runner hook. But
this blocks client shutdown if we're in the middle of unmounting. The
client won't be able to communicate with the plugin or send the
unpublish RPC anyways, so we should cancel the context and assume that
we'll resume the unmounting process when the client restarts.
For `-dev` mode we don't send the graceful `Shutdown()` method and
instead destroy all the allocations. In this case, we'll never be able
to communicate with the plugin but also never close the context we
need to prevent the hook from blocking. To fix this, move the retries
into their own goroutine that doesn't block the main `Postrun`.
This PR adds support for the raw_exec driver on systems with only cgroups v2.
The raw exec driver is able to use cgroups to manage processes. This happens
only on Linux, when exec_driver is enabled, and the no_cgroups option is not
set. The driver uses the freezer controller to freeze processes of a task,
issue a sigkill, then unfreeze. Previously the implementation assumed cgroups
v1, and now it also supports cgroups v2.
There is a bit of refactoring in this PR, but the fundamental design remains
the same.
Closes#12351#12348
This is a test around upgrading from Nomad 0.8, which is long since
no longer supported. The test is slow, flaky, and imports consul/sdk.
Remove this test as it is no longer relevant.
In #12112 and #12113 we solved for the problem of races in releasing
volume claims, but there was a case that we missed. During a node
drain with a controller attach/detach, we can hit a race where we call
controller publish before the unpublish has completed. This is
discouraged in the spec but plugins are supposed to handle it
safely. But if the storage provider's API is slow enough and the
plugin doesn't handle the case safely, the volume can get "locked"
into a state where the provider's API won't detach it cleanly.
Check the claim before making any external controller publish RPC
calls so that Nomad is responsible for the canonical information about
whether a volume is currently claimed.
This has a couple side-effects that also had to get fixed here:
* Changing the order means that the volume will have a past claim
without a valid external node ID because it came from the client, and
this uncovered a separate bug where we didn't assert the external node
ID was valid before returning it. Fallthrough to getting the ID from
the plugins in the state store in this case. We avoided this
originally because of concerns around plugins getting lost during node
drain but now that we've fixed that we may want to revisit it in
future work.
* We should make sure we're handling `FailedPrecondition` cases from
the controller plugin the same way we handle other retryable cases.
* Several tests had to be updated because they were assuming we fail
in a particular order that we're no longer doing.
Resolves#12095 by WONTFIXing it.
This approach disables `writeToFile` as it allows arbitrary host
filesystem writes and is only a small quality of life improvement over
multiple `template` stanzas.
This approach has the significant downside of leaving people who have
altered their `template.function_denylist` *still vulnerable!* I added
an upgrade note, but we should have implemented the denylist as a
`map[string]bool` so that new funcs could be denied without overriding
custom configurations.
This PR also includes a bug fix that broke enabling all consul-template
funcs. We repeatedly failed to differentiate between a nil (unset)
denylist and an empty (allow all) one.
This PR introduces support for using Nomad on systems with cgroups v2 [1]
enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux
distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems
for Nomad users.
Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer,
but not so for managing cpuset cgroups. Before, Nomad has been making use of
a feature in v1 where a PID could be a member of more than one cgroup. In v2
this is no longer possible, and so the logic around computing cpuset values
must be modified. When Nomad detects v2, it manages cpuset values in-process,
rather than making use of cgroup heirarchy inheritence via shared/reserved
parents.
Nomad will only activate the v2 logic when it detects cgroups2 is mounted at
/sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2
mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to
use the v1 logic, and should operate as before. Systems that do not support
cgroups v2 are also not affected.
When v2 is activated, Nomad will create a parent called nomad.slice (unless
otherwise configured in Client conifg), and create cgroups for tasks using
naming convention <allocID>-<task>.scope. These follow the naming convention
set by systemd and also used by Docker when cgroups v2 is detected.
Client nodes now export a new fingerprint attribute, unique.cgroups.version
which will be set to 'v1' or 'v2' to indicate the cgroups regime in use by
Nomad.
The new cpuset management strategy fixes#11705, where docker tasks that
spawned processes on startup would "leak". In cgroups v2, the PIDs are
started in the cgroup they will always live in, and thus the cause of
the leak is eliminated.
[1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.htmlCloses#11289Fixes#11705#11773#11933
* Use unix:// prefix for CSI_ENDPOINT variable by default
* Some plugins have strict validation over the format of the
`CSI_ENDPOINT` variable, and unfortunately not all plugins
agree. Allow the user to override the `CSI_ENDPOINT` to workaround
those cases.
* Update all demos and tests with CSI_ENDPOINT
The service registration wrapper handles sending requests to
backend providers without the caller needing to know this
information. This will be used within the task and alloc runner
service hooks when performing service registration activities.
This commit performs refactoring to pull out common service
registration objects into a new `client/serviceregistration`
package. This new package will form the base point for all
client specific service registration functionality.
The Consul specific implementation is not moved as it also
includes non-service registration implementations; this reduces
the blast radius of the changes as well.
Michael Schurter