The ACL command docs are now found within a sub-dir like the
operator command docs. Updates to the ACL token commands to
accommodate token expiry have also been added.
The ACL API docs are now found within a sub-dir like the operator
API docs. The ACL docs now include the ACL roles endpoint as well
as updated ACL token endpoints for token expiration.
The configuration section is also updated to accommodate the new
ACL and server parameters for the new ACL features.
Plan rejections occur when the scheduler work and the leader plan
applier disagree on the feasibility of a plan. This may happen for valid
reasons: since Nomad does parallel scheduling, it is expected that
different workers will have a different state when computing placements.
As the final plan reaches the leader plan applier, it may no longer be
valid due to a concurrent scheduling taking up intended resources. In
these situations the plan applier will notify the worker that the plan
was rejected and that they should refresh their state before trying
again.
In some rare and unexpected circumstances it has been observed that
workers will repeatedly submit the same plan, even if they are always
rejected.
While the root cause is still unknown this mitigation has been put in
place. The plan applier will now track the history of plan rejections
per client and include in the plan result a list of node IDs that should
be set as ineligible if the number of rejections in a given time window
crosses a certain threshold. The window size and threshold value can be
adjusted in the server configuration.
To avoid marking several nodes as ineligible at one, the operation is rate
limited to 5 nodes every 30min, with an initial burst of 10 operations.
Fixes#13505
This fixes#13505 by treating reserved_ports like we treat a lot of jobspec settings: merging settings from more global stanzas (client.reserved.reserved_ports) "down" into more specific stanzas (client.host_networks[].reserved_ports).
As discussed in #13505 there are other options, and since it's totally broken right now we have some flexibility:
Treat overlapping reserved_ports on addresses as invalid and refuse to start agents. However, I'm not sure there's a cohesive model we want to publish right now since so much 0.9-0.12 compat code still exists! We would have to explain to folks that if their -network-interface and host_network addresses overlapped, they could only specify reserved_ports in one place or the other?! It gets ugly.
Use the global client.reserved.reserved_ports value as the default and treat host_network[].reserverd_ports as overrides. My first suggestion in the issue, but @groggemans made me realize the addresses on the agent's interface (as configured by -network-interface) may overlap with host_networks, so you'd need to remove the global reserved_ports from addresses shared with a shared network?! This seemed really confusing and subtle for users to me.
So I think "merging down" creates the most expressive yet understandable approach. I've played around with it a bit, and it doesn't seem too surprising. The only frustrating part is how difficult it is to observe the available addresses and ports on a node! However that's a job for another PR.
* core: allow pause/un-pause of eval broker on region leader.
* agent: add ability to pause eval broker via scheduler config.
* cli: add operator scheduler commands to interact with config.
* api: add ability to pause eval broker via scheduler config
* e2e: add operator scheduler test for eval broker pause.
* docs: include new opertor scheduler CLI and pause eval API info.
Fix numerous go-getter security issues:
- Add timeouts to http, git, and hg operations to prevent DoS
- Add size limit to http to prevent resource exhaustion
- Disable following symlinks in both artifacts and `job run`
- Stop performing initial HEAD request to avoid file corruption on
retries and DoS opportunities.
**Approach**
Since Nomad has no ability to differentiate a DoS-via-large-artifact vs
a legitimate workload, all of the new limits are configurable at the
client agent level.
The max size of HTTP downloads is also exposed as a node attribute so
that if some workloads have large artifacts they can specify a high
limit in their jobspecs.
In the future all of this plumbing could be extended to enable/disable
specific getters or artifact downloading entirely on a per-node basis.
After a more detailed analysis of this feature, the approach taken in
PR #12449 was found to be not ideal due to poor UX (users are
responsible for setting the entity alias they would like to use) and
issues around jobs potentially masquerading itself as another Vault
entity.
Move some common Vault API data struct decoding out of the Vault client
so it can be reused in other situations.
Make Vault job validation its own function so it's easier to expand it.
Rename the `Job.VaultPolicies` method to just `Job.Vault` since it
returns the full Vault block, not just their policies.
Set `ChangeMode` on `Vault.Canonicalize`.
Add some missing tests.
Allows specifying an entity alias that will be used by Nomad when
deriving the task Vault token.
An entity alias assigns an indentity to a token, allowing better control
and management of Vault clients since all tokens with the same indentity
alias will now be considered the same client. This helps track Nomad
activity in Vault's audit logs and better control over Vault billing.
Add support for a new Nomad server configuration to define a default
entity alias to be used when deriving Vault tokens. This default value
will be used if the task doesn't have an entity alias defined.
The client configuration options for drivers have been deprecated
since 0.9. We haven't torn them out completely but because they're
deprecated it's been hard to guarantee correct behavior. Remove the
documentation so that users aren't misled about their viability.
Resolves#12095 by WONTFIXing it.
This approach disables `writeToFile` as it allows arbitrary host
filesystem writes and is only a small quality of life improvement over
multiple `template` stanzas.
This approach has the significant downside of leaving people who have
altered their `template.function_denylist` *still vulnerable!* I added
an upgrade note, but we should have implemented the denylist as a
`map[string]bool` so that new funcs could be denied without overriding
custom configurations.
This PR also includes a bug fix that broke enabling all consul-template
funcs. We repeatedly failed to differentiate between a nil (unset)
denylist and an empty (allow all) one.
The advertise.rpc config option is not intuitive. At first glance you'd
assume it works like advertise.http or advertise.serf, but it does not.
The current behavior is working as intended, but the documentation is
very hard to parse and doesn't draw a clear picture of what the setting
actually does.
Closes https://github.com/hashicorp/nomad/issues/11075
Nomad inherited protocol version numbering configuration from Consul and
Serf, but unlike those projects Nomad has never used it. Nomad's
`protocol_version` has always been `1`.
While the code is effectively unused and therefore poses no runtime
risks to leave, I felt like removing it was best because:
1. Nomad's RPC subsystem has been able to evolve extensively without
needing to increment the version number.
2. Nomad's HTTP API has evolved extensively without increment
`API{Major,Minor}Version`. If we want to version the HTTP API in the
future, I doubt this is the mechanism we would choose.
3. The presence of the `server.protocol_version` configuration
parameter is confusing since `server.raft_protocol` *is* an important
parameter for operators to consider. Even more confusing is that
there is a distinct Serf protocol version which is included in `nomad
server members` output under the heading `Protocol`. `raft_protocol`
is the *only* protocol version relevant to Nomad developers and
operators. The other protocol versions are either deadcode or have
never changed (Serf).
4. If we were to need to version the RPC, HTTP API, or Serf protocols, I
don't think these configuration parameters and variables are the best
choice. If we come to that point we should choose a versioning scheme
based on the use case and modern best practices -- not this 6+ year
old dead code.
This PR exposes the following existing`consul-template` configuration options to Nomad jobspec authors in the `{job.group.task.template}` stanza.
- `wait`
It also exposes the following`consul-template` configuration to Nomad operators in the `{client.template}` stanza.
- `max_stale`
- `block_query_wait`
- `consul_retry`
- `vault_retry`
- `wait`
Finally, it adds the following new Nomad-specific configuration to the `{client.template}` stanza that allows Operators to set bounds on what `jobspec` authors configure.
- `wait_bounds`
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
Client endpoints such as `alloc exec` are enforced on the client if
the API client or CLI has "line of sight" to the client. This is
already in the Learn guide but having it in the ACL configuration docs
would be helpful.
During incident response, operators may find that automated processes
elsewhere in the organization can be generating new workloads on Nomad
clusters that are unable to handle the workload. This changeset adds a
field to the `SchedulerConfiguration` API that causes all job
registration calls to be rejected unless the request has a management
ACL token.
Give ourselves some room for extension in the UI configuration block
by naming the field `ui_url`, which will let us have an `api_url`.
Fix the template path to ensure we're getting the right value from the
API.
While it *is* clarified toward the bottom of this page, I've seen people
go to great lengths to configure tokens for clients anyway, so I think
it's worth noting on the parameter's docs as well.
Fixes#2522
Skip embedding client.alloc_dir when building chroot. If a user
configures a Nomad client agent so that the chroot_env will embed the
client.alloc_dir, Nomad will happily infinitely recurse while building
the chroot until something horrible happens. The best case scenario is
the filesystem's path length limit is hit. The worst case scenario is
disk space is exhausted.
A bad agent configuration will look something like this:
```hcl
data_dir = "/tmp/nomad-badagent"
client {
enabled = true
chroot_env {
# Note that the source matches the data_dir
"/tmp/nomad-badagent" = "/ohno"
# ...
}
}
```
Note that `/ohno/client` (the state_dir) will still be created but not
`/ohno/alloc` (the alloc_dir).
While I cannot think of a good reason why someone would want to embed
Nomad's client (and possibly server) directories in chroots, there
should be no cause for harm. chroots are only built when Nomad runs as
root, and Nomad disables running exec jobs as root by default. Therefore
even if client state is copied into chroots, it will be inaccessible to
tasks.
Skipping the `data_dir` and `{client,server}.state_dir` is possible, but
this PR attempts to implement the minimum viable solution to reduce risk
of unintended side effects or bugs.
When running tests as root in a vm without the fix, the following error
occurs:
```
=== RUN TestAllocDir_SkipAllocDir
alloc_dir_test.go:520:
Error Trace: alloc_dir_test.go:520
Error: Received unexpected error:
Couldn't create destination file /tmp/TestAllocDir_SkipAllocDir1457747331/001/nomad/test/testtask/nomad/test/testtask/.../nomad/test/testtask/secrets/.nomad-mount: open /tmp/TestAllocDir_SkipAllocDir1457747331/001/nomad/test/.../testtask/secrets/.nomad-mount: file name too long
Test: TestAllocDir_SkipAllocDir
--- FAIL: TestAllocDir_SkipAllocDir (22.76s)
```
Also removed unused Copy methods on AllocDir and TaskDir structs.
Thanks to @eveld for not letting me forget about this!
FailoverHeartbeatTTL is the amount of time to wait after a server leader failure
before considering reallocating client tasks. This TTL should be fairly long as
the new server leader needs to rebuild the entire heartbeat map for the
cluster. In deployments with a small number of machines, the default TTL (5m)
may be unnecessary long. Let's allow operators to configure this value in their
config files.
By default we should not expose the NOMAD_LICENSE environment variable
to tasks.
Also refactor where the DefaultEnvDenyList lives so we don't have to
maintain 2 copies of it. Since client/config is the most obvious
location, keep a reference there to its unfortunate home buried deep
in command/agent/host. Since the agent uses this list as well for the
/agent/host endpoint the list must be accessible from both command/agent
and client.
* don't timestamp active log file
* website: update log_file default value
* changelog: add entry for #11070
* website: add upgrade instructions for log_file in v1.14 and v1.2.0
This PR implements a new "System Batch" scheduler type. Jobs can
make use of this new scheduler by setting their type to 'sysbatch'.
Like the name implies, sysbatch can be thought of as a hybrid between
system and batch jobs - it is for running short lived jobs intended to
run on every compatible node in the cluster.
As with batch jobs, sysbatch jobs can also be periodic and/or parameterized
dispatch jobs. A sysbatch job is considered complete when it has been run
on all compatible nodes until reaching a terminal state (success or failed
on retries).
Feasibility and preemption are governed the same as with system jobs. In
this PR, the update stanza is not yet supported. The update stanza is sill
limited in functionality for the underlying system scheduler, and is
not useful yet for sysbatch jobs. Further work in #4740 will improve
support for the update stanza and deployments.
Closes#2527
Bryce Kalow