A Nomad user reported problems with CSI volumes associated with failed
allocations, where the Nomad server did not send a controller unpublish RPC.
The controller unpublish is skipped if other non-terminal allocations on the
same node claim the volume. The check has a bug where the allocation belonging
to the claim being freed was included in the check incorrectly. During a normal
allocation stop for job stop or a new version of the job, the allocation is
terminal. But allocations that fail are not yet marked terminal at the point in
time when the client sends the unpublish RPC to the server.
For CSI plugins that support controller attach/detach, this means that the
controller will not be able to detach the volume from the allocation's host and
the replacement claim will fail until a GC is run. This changeset fixes the
conditional so that the claim's own allocation is not included, and makes the
logic easier to read. Include a test case covering this path.
Also includes two minor extra bugfixes:
* Entities we get from the state store should always be copied before
altering. Ensure that we copy the volume in the top-level unpublish workflow
before handing off to the steps.
* The list stub object for volumes in `nomad/structs` did not match the stub
object in `api`. The `api` package also did not include the current
readers/writers fields that are expected by the UI. True up the two objects and
add the previously undocumented fields to the docs.
The ACL command docs are now found within a sub-dir like the
operator command docs. Updates to the ACL token commands to
accommodate token expiry have also been added.
The ACL API docs are now found within a sub-dir like the operator
API docs. The ACL docs now include the ACL roles endpoint as well
as updated ACL token endpoints for token expiration.
The configuration section is also updated to accommodate the new
ACL and server parameters for the new ACL features.
* allocrunner: handle lifecycle when all tasks die
When all tasks die the Coordinator must transition to its terminal
state, coordinatorStatePoststop, to unblock poststop tasks. Since this
could happen at any time (for example, a prestart task dies), all states
must be able to transition to this terminal state.
* allocrunner: implement different alloc restarts
Add a new alloc restart mode where all tasks are restarted, even if they
have already exited. Also unifies the alloc restart logic to use the
implementation that restarts tasks concurrently and ignores
ErrTaskNotRunning errors since those are expected when restarting the
allocation.
* allocrunner: allow tasks to run again
Prevent the task runner Run() method from exiting to allow a dead task
to run again. When the task runner is signaled to restart, the function
will jump back to the MAIN loop and run it again.
The task runner determines if a task needs to run again based on two new
task events that were added to differentiate between a request to
restart a specific task, the tasks that are currently running, or all
tasks that have already run.
* api/cli: add support for all tasks alloc restart
Implement the new -all-tasks alloc restart CLI flag and its API
counterpar, AllTasks. The client endpoint calls the appropriate restart
method from the allocrunner depending on the restart parameters used.
* test: fix tasklifecycle Coordinator test
* allocrunner: kill taskrunners if all tasks are dead
When all non-poststop tasks are dead we need to kill the taskrunners so
we don't leak their goroutines, which are blocked in the alloc restart
loop. This also ensures the allocrunner exits on its own.
* taskrunner: fix tests that waited on WaitCh
Now that "dead" tasks may run again, the taskrunner Run() method will
not return when the task finishes running, so tests must wait for the
task state to be "dead" instead of using the WaitCh, since it won't be
closed until the taskrunner is killed.
* tests: add tests for all tasks alloc restart
* changelog: add entry for #14127
* taskrunner: fix restore logic.
The first implementation of the task runner restore process relied on
server data (`tr.Alloc().TerminalStatus()`) which may not be available
to the client at the time of restore.
It also had the incorrect code path. When restoring a dead task the
driver handle always needs to be clear cleanly using `clearDriverHandle`
otherwise, after exiting the MAIN loop, the task may be killed by
`tr.handleKill`.
The fix is to store the state of the Run() loop in the task runner local
client state: if the task runner ever exits this loop cleanly (not with
a shutdown) it will never be able to run again. So if the Run() loops
starts with this local state flag set, it must exit early.
This local state flag is also being checked on task restart requests. If
the task is "dead" and its Run() loop is not active it will never be
able to run again.
* address code review requests
* apply more code review changes
* taskrunner: add different Restart modes
Using the task event to differentiate between the allocrunner restart
methods proved to be confusing for developers to understand how it all
worked.
So instead of relying on the event type, this commit separated the logic
of restarting an taskRunner into two methods:
- `Restart` will retain the current behaviour and only will only restart
the task if it's currently running.
- `ForceRestart` is the new method where a `dead` task is allowed to
restart if its `Run()` method is still active. Callers will need to
restart the allocRunner taskCoordinator to make sure it will allow the
task to run again.
* minor fixes
* Initialized keyboard service
Neat but funky: dynamic subnav traversal
👻
generalized traverseSubnav method
Shift as special modifier key
Nice little demo panel
Keyboard shortcuts keycard
Some animation styles on keyboard shortcuts
Handle situations where a link is deeply nested from its parent menu item
Keyboard service cleanup
helper-based initializer and teardown for new contextual commands
Keyboard shortcuts modal component added and demo-ghost removed
Removed j and k from subnav traversal
Register and unregister methods for subnav plus new subnavs for volumes and volume
register main nav method
Generalizing the register nav method
12762 table keynav (#12975)
* Experimental feature: shortcut visual hints
* Long way around to a custom modifier for keyboard shortcuts
* dynamic table and list iterative shortcuts
* Progress with regular old tether
* Delogging
* Table Keynav tether fix, server and client navs, and fix to shiftless on modified arrow keys
Go to Optimize keyboard link and storage key changed to g r
parameterized jobs keyboard nav
Dynamic numeric keynav for multiple tables (#13482)
* Multiple tables init
* URL-bind enumerable keyboard commands and add to more taskRow and allocationRows
* Type safety and lint fixes
* Consolidated push to keyCommands
* Default value when removing keyCommands
* Remove the URL-based removal method and perform a recompute on any add
Get tests passing in Keynav: remove math helpers and a few other defensive moves (#13761)
* Remove ember math helpers
* Test fixes for jobparts/body
* Kill an unneeded integration helper test
* delog
* Trying if disabling percy lets this finish
* Okay so its not percy; try parallelism in circle
* Percyless yet again
* Trying a different angle to not have percy
* Upgrade percy to 1.6.1
[ui] Keyboard nav: "u" key to go up a level (#13754)
* U to go up a level
* Mislabelled my conditional
* Custom lint ignore rule
* Custom lint ignore rule, this time with commas
* Since we're getting rid of ember math helpers elsewhere, do the math ourselves here
Replace ArrowLeft etc. with an ascii arrow (#13776)
* Replace ArrowLeft etc. with an ascii arrow
* non-mutative helper cleanup
Keyboard Nav: let users rebind their shortcuts (#13781)
* click-outside and shortcuts enabled/disabled toggle
* Trap focus when modal open
* Enabled/disabled saved to localStorage
* Autofocus edit button on variable index
* Modal overflow styles
* Functional rebind
* Saving rebinds to localStorage for all majors
* Started on defaultCommandBindings
* Modal header style and cancel rebind on escape
* keyboardable keybindings w buttons instead of spans
* recording and defaultvalues
* Enter short-circuits rebind
* Only some commands are rebindable, and dont show dupes
* No unused get import
* More visually distinct header on modal
* Disallowed keys for rebind, showing buffer as you type, and moving dedupe to modal logic
willDestroy hook to prevent tests from doubling/tripling up addEventListener on kb events
remove unused tests
Keyboard Navigation acceptance tests (#13893)
* Acceptance tests for keyboard modal
* a11y audit fix and localStorage clear
* Bind/rebind/localStorage tests
* Keyboard tests for dynamic nav and tables
* Rebinder and assert expectation
* Second percy snapshot showing hints no longer relevant
Weird issue where linktos with query props specifically from the task-groups page would fail to route / hit undefined.shouldSuperCede errors
Adds the concept of exclusivity to a keycommand, removing peers that also share its label
Lintfix
Changelog and PR feedback
Changelog and PR feedback
Fix to rebinding in firefox by blurring the now-disabled button on rebind (#14053)
* Secure Variables shortcuts removed
* Variable index route autofocus removed
* Updated changelog entry
* Updated changelog entry
* Keynav docs (#14148)
* Section added to the API Docs UI page
* Added a note about disabling
* Prev and Next order
* Remove dev log and unneeded comments
This PR changes the behavior of 'nomad job validate' to forward the
request to the nomad leader, rather than responding from any server.
This is because we need the leader when validating Vault tokens, since
the leader is the only server with an active vault client.
Move the secure variables quota enforcement calls into the state store to ensure
quota checks are atomic with quota updates (in the same transaction).
Switch to a machine-size int instead of a uint64 for quota tracking. The
ENT-side quota spec is described as int, and negative values have a meaning as
"not permitted at all". Using the same type for tracking will make it easier to
the math around checks, and uint64 is infeasibly large anyways.
Add secure vars to quota HTTP API and CLI outputs and API docs.
* core: allow pause/un-pause of eval broker on region leader.
* agent: add ability to pause eval broker via scheduler config.
* cli: add operator scheduler commands to interact with config.
* api: add ability to pause eval broker via scheduler config
* e2e: add operator scheduler test for eval broker pause.
* docs: include new opertor scheduler CLI and pause eval API info.
This PR adds the 'choose' query parameter to the '/v1/service/<service>' endpoint.
The value of 'choose' is in the form '<number>|<key>', number is the number
of desired services and key is a value unique but consistent to the requester
(e.g. allocID).
Folks aren't really expected to use this API directly, but rather through consul-template
which will soon be getting a new helper function making use of this query parameter.
Example,
curl 'localhost:4646/v1/service/redis?choose=2|abc123'
Note: consul-templte v0.29.1 includes the necessary nomadServices functionality.
Closes#12927Closes#12958
This PR updates the version of redis used in our examples from 3.2 to 7.
The old version is very not supported anymore, and we should be setting
a good example by using a supported version.
The long-form example job is now fixed so that the service stanza uses
nomad as the service discovery provider, and so now the job runs without
a requirement of having Consul running and configured.
* docs: update json jobs docs
Did you know that Nomad has not 1 but 2 JSON formats for jobs? 2½ if you
want to acknowledge that sometimes our JSON job representations have a
Job top-level wrapper and sometimes do not.
The 2½ formats are:
```
1. HCL JSON
2. Input API JSON (top-level Job field)
2.5. Output API JSON (lacks top-level Job field)
```
`#2` is what our docs consider our API JSON. `#2.5` seems to be an
accident of history we can't fix with breaking API compatibility.
`#1` is an even more interesting accident of history: the `jobspec2`
package automatically detects if the input to Parse is JSON and switches
to a JSON parser. This behavior is undocumented, the format is
unspecified, and there is no official HashiCorp tooling to produce this
JSON from HCL. The plot thickens when you discover popular third party
tools like hcl2json.com and https://github.com/tmccombs/hcl2json seem to
produce JSON that `nomad run` accepts!
Since we have no telemetry around whether or not anyone passes HCL JSON
to `nomad run`, and people don't file bugs around features that Just
Work, I'm choosing to leave that code path in place and *acknowledged
but not suggested* in documentation.
See https://github.com/hashicorp/hcl/issues/498 for a more comprehensive
discussion of what officially supporting HCL JSON in Nomad would look
like.
(I also added some of the missing fields to the (Input API flavor) JSON
Job documentation, but it still needs a lot of work to be
comprehensive.)
Co-authored-by: Tim Gross <tgross@hashicorp.com>
* Add os to NodeListStub struct.
Signed-off-by: Shishir Mahajan <smahajan@roblox.com>
* Add os as a query param to /v1/nodes.
Signed-off-by: Shishir Mahajan <smahajan@roblox.com>
* Add test: os as a query param to /v1/nodes.
Signed-off-by: Shishir Mahajan <smahajan@roblox.com>
* services: add pagination and filter support to info RPC.
* cli: add filter flag to service info command.
* docs: add pagination and filter details to services info API.
* paginator: minor updates to comment and func signature.
The `related` query param is used to indicate that the request should
return a list of related (next, previous, and blocked) evaluations.
Co-authored-by: Jasmine Dahilig <jasmine@hashicorp.com>
Nomad inherited protocol version numbering configuration from Consul and
Serf, but unlike those projects Nomad has never used it. Nomad's
`protocol_version` has always been `1`.
While the code is effectively unused and therefore poses no runtime
risks to leave, I felt like removing it was best because:
1. Nomad's RPC subsystem has been able to evolve extensively without
needing to increment the version number.
2. Nomad's HTTP API has evolved extensively without increment
`API{Major,Minor}Version`. If we want to version the HTTP API in the
future, I doubt this is the mechanism we would choose.
3. The presence of the `server.protocol_version` configuration
parameter is confusing since `server.raft_protocol` *is* an important
parameter for operators to consider. Even more confusing is that
there is a distinct Serf protocol version which is included in `nomad
server members` output under the heading `Protocol`. `raft_protocol`
is the *only* protocol version relevant to Nomad developers and
operators. The other protocol versions are either deadcode or have
never changed (Serf).
4. If we were to need to version the RPC, HTTP API, or Serf protocols, I
don't think these configuration parameters and variables are the best
choice. If we come to that point we should choose a versioning scheme
based on the use case and modern best practices -- not this 6+ year
old dead code.
These API endpoints now return results in chronological order. They
can return results in reverse chronological order by setting the
query parameter ascending=true.
- Eval.List
- Deployment.List
## Development Environment Changes
* Added stringer to build deps
## New HTTP APIs
* Added scheduler worker config API
* Added scheduler worker info API
## New Internals
* (Scheduler)Worker API refactor—Start(), Stop(), Pause(), Resume()
* Update shutdown to use context
* Add mutex for contended server data
- `workerLock` for the `workers` slice
- `workerConfigLock` for the `Server.Config.NumSchedulers` and
`Server.Config.EnabledSchedulers` values
## Other
* Adding docs for scheduler worker api
* Add changelog message
Co-authored-by: Derek Strickland <1111455+DerekStrickland@users.noreply.github.com>
API queries can request pagination using the `NextToken` and `PerPage`
fields of `QueryOptions`, when supported by the underlying API.
Add a `NextToken` field to the `structs.QueryMeta` so that we have a
common field across RPCs to tell the caller where to resume paging
from on their next API call. Include this field on the `api.QueryMeta`
as well so that it's available for future versions of List HTTP APIs
that wrap the response with `QueryMeta` rather than returning a simple
list of structs. In the meantime callers can get the `X-Nomad-NextToken`.
Add pagination to the `Eval.List` RPC by checking for pagination token
and page size in `QueryOptions`. This will allow resuming from the
last ID seen so long as the query parameters and the state store
itself are unchanged between requests.
Add filtering by job ID or evaluation status over the results we get
out of the state store.
Parse the query parameters of the `Eval.List` API into the arguments
expected for filtering in the RPC call.
During incident response, operators may find that automated processes
elsewhere in the organization can be generating new workloads on Nomad
clusters that are unable to handle the workload. This changeset adds a
field to the `SchedulerConfiguration` API that causes all job
registration calls to be rejected unless the request has a management
ACL token.
This change modifies the Nomad job register and deregister RPCs to
accept an updated option set which includes eval priority. This
param is optional and override the use of the job priority to set
the eval priority.
In order to ensure all evaluations as a result of the request use
the same eval priority, the priority is shared to the
allocReconciler and deploymentWatcher. This creates a new
distinction between eval priority and job priority.
The Nomad agent HTTP API has been modified to allow setting the
eval priority on job update and delete. To keep consistency with
the current v1 API, job update accepts this as a payload param;
job delete accepts this as a query param.
Any user supplied value is validated within the agent HTTP handler
removing the need to pass invalid requests to the server.
The register and deregister opts functions now all for setting
the eval priority on requests.
The change includes a small change to the DeregisterOpts function
which handles nil opts. This brings the function inline with the
RegisterOpts.
