Currently CRUD code that operates on SSO auth methods does not return created or updated object upon creation/update. This is bad UX and inconsistent behavior compared to other ACL objects like roles, policies or tokens.
This PR fixes it.
Relates to #13120
During unusual outage recovery scenarios on large clusters, a backlog of
millions of evaluations can appear. In these cases, the `eval delete` command can
put excessive load on the cluster by listing large sets of evals to extract the
IDs and then sending larges batches of IDs. Although the command's batch size
was carefully tuned, we still need to be JSON deserialize, re-serialize to
MessagePack, send the log entries through raft, and get the FSM applied.
To improve performance of this recovery case, move the batching process into the
RPC handler and the state store. The design here is a little weird, so let's
look a the failed options first:
* A naive solution here would be to just send the filter as the raft request and
let the FSM apply delete the whole set in a single operation. Benchmarking with
1M evals on a 3 node cluster demonstrated this can block the FSM apply for
several minutes, which puts the cluster at risk if there's a leadership
failover (the barrier write can't be made while this apply is in-flight).
* A less naive but still bad solution would be to have the RPC handler filter
and paginate, and then hand a list of IDs to the existing raft log
entry. Benchmarks showed this blocked the FSM apply for 20-30s at a time and
took roughly an hour to complete.
Instead, we're filtering and paginating in the RPC handler to find a page token,
and then passing both the filter and page token in the raft log. The FSM apply
recreates the paginator using the filter and page token to get roughly the same
page of evaluations, which it then deletes. The pagination process is fairly
cheap (only abut 5% of the total FSM apply time), so counter-intuitively this
rework ends up being much faster. A benchmark of 1M evaluations showed this
blocked the FSM apply for 20-30ms at a time (typical for normal operations) and
completes in less than 4 minutes.
Note that, as with the existing design, this delete is not consistent: a new
evaluation inserted "behind" the cursor of the pagination will fail to be
deleted.
This PR solves a defect in the deserialization of api.Port structs when returning structs from theEventStream.
Previously, the api.Port struct's fields were decorated with both mapstructure and hcl tags to support the network.port stanza's use of the keyword static when posting a static port value. This works fine when posting a job and when retrieving any struct that has an embedded api.Port instance as long as the value is deserialized using JSON decoding. The EventStream, however, uses mapstructure to decode event payloads in the api package. mapstructure expects an underlying field named static which does not exist. The result was that the Port.Value field would always be set to 0.
Upon further inspection, a few things became apparent.
The struct already has hcl tags that support the indirection during job submission.
Serialization/deserialization with both the json and hcl packages produce the desired result.
The use of of the mapstructure tags provided no value as the Port struct contains only fields with primitive types.
This PR:
Removes the mapstructure tags from the api.Port structs
Updates the job parsing logic to use hcl instead of mapstructure when decoding Port instances.
Closes#11044
Co-authored-by: DerekStrickland <dstrickland@hashicorp.com>
Co-authored-by: Piotr Kazmierczak <470696+pkazmierczak@users.noreply.github.com>
Add a new `Eval.Count` RPC and associated HTTP API endpoints. This API is
designed to support interactive use in the `nomad eval delete` command to get a
count of evals expected to be deleted before doing so.
The state store operations to do this sort of thing are somewhat expensive, but
it's cheaper than serializing a big list of evals to JSON. Note that although it
seems like this could be done as an extra parameter and response field on
`Eval.List`, having it as its own endpoint avoids having to change the response
body shape and lets us avoid handling the legacy filter params supported by
`Eval.List`.
* Adds meta to job list stub and displays a pack logo on the jobs index
* Changelog
* Modifying struct for optional meta param
* Explicitly ask for meta anytime I look up a job from index or job page
* Test case for the endpoint
* adding meta field to API struct and ommitting from response if empty
* passthru method added to api/jobs.list
* Meta param listed in docs for jobs list
* Update api/jobs.go
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Tim Gross <tgross@hashicorp.com>
A Nomad user reported problems with CSI volumes associated with failed
allocations, where the Nomad server did not send a controller unpublish RPC.
The controller unpublish is skipped if other non-terminal allocations on the
same node claim the volume. The check has a bug where the allocation belonging
to the claim being freed was included in the check incorrectly. During a normal
allocation stop for job stop or a new version of the job, the allocation is
terminal. But allocations that fail are not yet marked terminal at the point in
time when the client sends the unpublish RPC to the server.
For CSI plugins that support controller attach/detach, this means that the
controller will not be able to detach the volume from the allocation's host and
the replacement claim will fail until a GC is run. This changeset fixes the
conditional so that the claim's own allocation is not included, and makes the
logic easier to read. Include a test case covering this path.
Also includes two minor extra bugfixes:
* Entities we get from the state store should always be copied before
altering. Ensure that we copy the volume in the top-level unpublish workflow
before handing off to the steps.
* The list stub object for volumes in `nomad/structs` did not match the stub
object in `api`. The `api` package also did not include the current
readers/writers fields that are expected by the UI. True up the two objects and
add the previously undocumented fields to the docs.
Neither the `os.Setenv` nor `t.Setenv` helper are safe to use in parallel tests
because environment variables are process-global. The stdlib panics if you try
to do this. Remove the `ci.Parallel()` call from all tests where we're setting
environment variables.
An ACL roles name must be unique, however, a bug meant multiple
roles of the same same could be created. This fixes that problem
with checks in the RPC handler and state store.
* allocrunner: handle lifecycle when all tasks die
When all tasks die the Coordinator must transition to its terminal
state, coordinatorStatePoststop, to unblock poststop tasks. Since this
could happen at any time (for example, a prestart task dies), all states
must be able to transition to this terminal state.
* allocrunner: implement different alloc restarts
Add a new alloc restart mode where all tasks are restarted, even if they
have already exited. Also unifies the alloc restart logic to use the
implementation that restarts tasks concurrently and ignores
ErrTaskNotRunning errors since those are expected when restarting the
allocation.
* allocrunner: allow tasks to run again
Prevent the task runner Run() method from exiting to allow a dead task
to run again. When the task runner is signaled to restart, the function
will jump back to the MAIN loop and run it again.
The task runner determines if a task needs to run again based on two new
task events that were added to differentiate between a request to
restart a specific task, the tasks that are currently running, or all
tasks that have already run.
* api/cli: add support for all tasks alloc restart
Implement the new -all-tasks alloc restart CLI flag and its API
counterpar, AllTasks. The client endpoint calls the appropriate restart
method from the allocrunner depending on the restart parameters used.
* test: fix tasklifecycle Coordinator test
* allocrunner: kill taskrunners if all tasks are dead
When all non-poststop tasks are dead we need to kill the taskrunners so
we don't leak their goroutines, which are blocked in the alloc restart
loop. This also ensures the allocrunner exits on its own.
* taskrunner: fix tests that waited on WaitCh
Now that "dead" tasks may run again, the taskrunner Run() method will
not return when the task finishes running, so tests must wait for the
task state to be "dead" instead of using the WaitCh, since it won't be
closed until the taskrunner is killed.
* tests: add tests for all tasks alloc restart
* changelog: add entry for #14127
* taskrunner: fix restore logic.
The first implementation of the task runner restore process relied on
server data (`tr.Alloc().TerminalStatus()`) which may not be available
to the client at the time of restore.
It also had the incorrect code path. When restoring a dead task the
driver handle always needs to be clear cleanly using `clearDriverHandle`
otherwise, after exiting the MAIN loop, the task may be killed by
`tr.handleKill`.
The fix is to store the state of the Run() loop in the task runner local
client state: if the task runner ever exits this loop cleanly (not with
a shutdown) it will never be able to run again. So if the Run() loops
starts with this local state flag set, it must exit early.
This local state flag is also being checked on task restart requests. If
the task is "dead" and its Run() loop is not active it will never be
able to run again.
* address code review requests
* apply more code review changes
* taskrunner: add different Restart modes
Using the task event to differentiate between the allocrunner restart
methods proved to be confusing for developers to understand how it all
worked.
So instead of relying on the event type, this commit separated the logic
of restarting an taskRunner into two methods:
- `Restart` will retain the current behaviour and only will only restart
the task if it's currently running.
- `ForceRestart` is the new method where a `dead` task is allowed to
restart if its `Run()` method is still active. Callers will need to
restart the allocRunner taskCoordinator to make sure it will allow the
task to run again.
* minor fixes
The original design for workload identities and ACLs allows for operators to
extend the automatic capabilities of a workload by using a specially-named
policy. This has shown to be potentially unsafe because of naming collisions, so
instead we'll allow operators to explicitly attach a policy to a workload
identity.
This changeset adds workload identity fields to ACL policy objects and threads
that all the way down to the command line. It also a new secondary index to the
ACL policy table on namespace and job so that claim resolution can efficiently
query for related policies.
When a Nomad agent starts and loads jobs that already existed in the
cluster, the default template uid and gid was being set to 0, since this
is the zero value for int. This caused these jobs to fail in
environments where it was not possible to use 0, such as in Windows
clients.
In order to differentiate between an explicit 0 and a template where
these properties were not set we need to use a pointer.
Making the ACL Role listing return object a stub future-proofs the
endpoint. In the event the role object grows, we are not bound by
having to return all fields within the list endpoint or change the
signature of the endpoint to reduce the list return size.
This PR adds some NSD check status output to the CLI.
1. The 'nomad alloc status' command produces nsd check summary output (if present)
2. The 'nomad alloc checks' sub-command is added to produce complete nsd check output (if present)
HTTP API consumers that have network line-of-sight to client nodes can connect
directly for a small number of APIs. But in environments where the consumer
doesn't have line-of-sight, there's a long pause waiting for the
`api.ClientConnTimeout` to expire. Warn about this in the API docs so that
authors can avoid the extra timeout.
UID/GID 0 is usually reserved for the root user/group. While Nomad
clients are expected to run as root it may not always be the case.
Setting these values as -1 if not defined will fallback to the pervious
behaviour of not attempting to set file ownership and use whatever
UID/GID the Nomad agent is running as. It will also keep backwards
compatibility, which is specially important for platforms where this
feature is not supported, like Windows.
* Allow specification of CSI staging and publishing directory path
* Add website documentation for stage_publish_dir
* Replace erroneous reference to csi_plugin.mount_config with csi_plugin.mount_dir
* Avoid requiring CSI plugins to be redeployed after introducing StagePublishDir
dependabot[bot]