This commit causes the docker driver to return undetected before it
first establishes a connection to the docker daemon.
This fixes a bug where hosts without docker installed would return as
unhealthy, rather than undetected.
As far as I can tell this is the most straightforward and resilient way
to skip error logging on context cancellation with grpc streams. You
cannot compare the error against context.Canceled directly as it is of
type `*status.statusError`. The next best solution I found was:
```go
resp, err := stream.Recv()
if code, ok := err.(interface{ Code() code.Code }); ok {
if code.Code == code.Canceled {
return
}
}
```
However I think checking ctx.Err() directly makes the code much easier
to read and is resilient against grpc API changes.
Currently if a docker_logger cannot be reattached to, we will leak the
container that was being used. This is problematic if e.g using static
ports as it means you can never recover your task, or if a service is
expensive to run and will then be running without supervision.
Sometimes the nomad docker_logger may be killed by a service manager
when restarting the client for upgrades or reliability reasons.
Currently if this happens, we leak the users container and try to
reschedule over it.
This commit adds a new step to the recovery process that will spawn a
new docker logger process that will fetch logs from _the current
timestamp_. This is to avoid restarting users tasks because our logging
sidecar has failed.
* CVE-2019-5736: Update libcontainer depedencies
Libcontainer is vulnerable to a runc container breakout, that was
reported as CVE-2019-5736[1]. Upgrading vendored libcontainer with the fix.
The runc changes are captured in 369b920277 .
[1] https://seclists.org/oss-sec/2019/q1/119
This commit adds some extra resiliency to the docker logger in the case
of API failure from the docker daemon, by restarting the stream from the
current point in time if the stream returns and the container is still
running.
This ensures that `port_map` along with other block like attribute
declarations (e.g. ulimit, labels, etc) can handle various hcl and json
syntax that was supported in 0.8.
In 0.8.7, the following declarations are effectively equivalent:
```
// hcl block
port_map {
http = 80
https = 443
}
// hcl assignment
port_map = {
http = 80
https = 443
}
// json single element array of map (default in API response)
{"port_map": [{"http": 80, "https": 443}]}
// json array of individual maps (supported accidentally iiuc)
{"port_map: [{"http": 80}, {"https": 443}]}
```
We achieve compatbility by using `NewAttr("...", "list(map(string))",
false)` to be serialized to a `map[string]string` wrapper, instead of using
`BlockAttrs` declaration. The wrapper merges the list of maps
automatically, to ease driver development.
This approach is closer to how v0.8.7 implemented the fields [1][2], and
despite its verbosity, seems to perserve 0.8.7 behavior in hcl2.
This is only required for built-in types that have backward
compatibility constraints. External drivers should use `BlockAttrs`
instead, as they see fit.
[1] https://github.com/hashicorp/nomad/blob/v0.8.7/client/driver/docker.go#L216
[2] https://github.com/hashicorp/nomad/blob/v0.8.7/client/driver/docker.go#L698-L700
Windows Docker daemon does not support SIGINT, SIGTERM is the semantic
equivalent that allows for graceful shutdown before being followed up by
a SIGKILL.
Restore 0.8.x behavior where java driver is marked as detected when
`java -version` exits with 0 but returns unexpected output.
Furthermore, we restore behavior when `java -version` where we parse the
first three lines of `java -version` but ignore rest.
If `java -version` returns less than 3 lines, Nomad 0.8.7 would panic.
In this implementation, we'd still mark java as detected but returns
empty version.
The 0.8.7 logic for detecting java version is found in
https://github.com/hashicorp/nomad/blob/v0.8.7/client/driver/java.go#L132-L172
.
I punt on revamping how we can be more resilient to java -version
syntax, and aimed for preserving existing behavior instead.
* master: (23 commits)
tests: avoid assertion in goroutine
spell check
ci: run checkscripts
tests: deflake TestRktDriver_StartWaitRecoverWaitStop
drivers/rkt: Remove unused github.com/rkt/rkt
drivers/rkt: allow development on non-linux
cli: Hide `nomad docker_logger` from help output
api: test api and structs are in sync
goimports until make check is happy
nil check node resources to prevent panic
tr: use context in as select statement
move pluginutils -> helper/pluginutils
vet
goimports
gofmt
Split hclspec
move hclutils
Driver tests do not use hcl2/hcl, hclspec, or hclutils
move reattach config
loader and singleton
...
Due to https://github.com/tsenart/deadcode/issues/3 we can't specify
these consts on their own. This moves them into the _platform_test.go
files to avoid creating a package that only exposes a couple of values.
* Docker for Windows does not support ulimits
* Use filepath.ToSlash to test workdir
* Convert expected mount paths to system style
* Skip security-opt test on windows
- Windows does not support seccomp, and it's unclear which options are
available.
* Skip StartN due to lack of sigint
* docker: Use api to get image info on windows
* No bridge on windows
* Stop hardcoding /bin/
Uses the home directory and windows path expansion, as c:\tmp doesn't
necessarily exist, and mktemp would involve unnecessarily complicating
the commands.
- docker fingerprint issues a docker api system info call to get the
list of supported OCI runtimes.
- OCI runtimes are reported as comma separated list of names
- docker driver is aware of GPU runtime presence
- docker driver throws an error when user tries to run container with
GPU, when GPU runtime is not present
- docker GPU runtime name is configurable
Previously, we did not attempt to stop Docker Logger processes until
DestroyTask, which means that under many circumstances, we will never
successfully close the plugin client.
This commit terminates the plugin process when `run` terminates, or when
`DestroyTask` is called.
Steps to repro:
```
$ nomad agent -dev
$ nomad init
$ nomad run example.nomad
$ nomad stop example
$ ps aux | grep nomad # See docker logger process running
$ signal the dev agent
$ ps aux | grep nomad # See docker logger process running
```
Track current memory usage, `memory.usage_in_bytes`, in addition to
`memory.max_memory_usage_in_bytes` and friends. This number is closer
what Docker reports.
Related to https://github.com/hashicorp/nomad/issues/5165 .
plugins/driver: update driver interface to support streaming stats
client/tr: use streaming stats api
TODO:
* how to handle errors and closed channel during stats streaming
* prevent tight loop if Stats(ctx) returns an error
drivers: update drivers TaskStats RPC to handle streaming results
executor: better error handling in stats rpc
docker: better control and error handling of stats rpc
driver: allow stats to return a recoverable error
This PR fixes various instances of plugins being launched without using
the parent loggers. This meant that logs would not all go to the same
output, break formatting etc.
Use `/tmp` as temporary directory for docker driver tests, so tests can
run out of the box without any intervention.
macOS sets tempdir as `/var`, which Docker does not whitelist as a path
that can be bind-mounted.
Re-export the ResourceUsage structs in drivers package to avoid drivers
directly depending on the internal client/structs package directly.
I attempted moving the structs to drivers, but that caused some import
cycles that was a bit hard to disentagle. Alternatively, I added an
alias here that's sufficient for our purposes of avoiding external
drivers depend on internal packages, while allowing us to restructure
packages in future without breaking source compatibility.
This implements the InternalPluginDriver interface in each driver, and
calls the cancellation fn for their respective eventers.
This fixes a per task goroutine leak during test suite execution.
We ultimately decided to provide a limited set of devices in exec/java
drivers instead of all of host ones. Pre-0.9, we made all host devices
available to exec tasks accidentally, yet most applications only use a
small subset, and this choice limits our ability to restrict/isolate GPU
and other devices.
Starting with 0.9, by default, we only provide the same subset of
devices Docker provides, and allow users to provide more devices as
needed on case-by-case basis.
This reverts commit 5805c64a9f1c3b409693493dfa30e7136b9f547b.
This reverts commit ff9a4a17e59388dcab067949e0664f645b2f5bcf.
Use a dedicated /dev mount so we can inject more devices if necessary,
and avoid allowing a container to contaminate host /dev.
Follow up to https://github.com/hashicorp/nomad/pull/5143 - and fixes master.
Restores pre-0.9 behavior, where Nomad makes /dev available to exec
task. Switching to libcontainer, we accidentally made only a small
subset available.
Here, we err on the side of preserving behavior of 0.8, instead of going
for the sensible route, where only a reasonable subset of devices is
mounted by default and user can opt to request more.
Currently the docker driver does not remove tasks from its state map
when destroying the task, which leads to issues when restarting tasks in
place, and leaks expired handles over time.
The environment variables needed for envoking `rkt` command line
should include host PATH (to access `iptables`).
Given that the command runs outside the VM, untrusted task environment
variables should NOT be honored here.
We do this already with `rkt`, but the change is quite subtle to miss
when refactoring.
We already have two other Kill tests (e.g.
TestDockerDriver_Start_Kill_Wait and
TestDockerDriver_Start_KillTimeout), so don't need yet another flaky
test.
Noticed an issue in Docker daemon failing to handle the OOM test case
failure in build https://travis-ci.org/hashicorp/nomad/jobs/468027848 ,
and I suspect it's related to the process dying so quickly, and
potentially the way we are starting the task, so added a start up delay
and made it more consistent with other tests that don't seem as flaky.
The following is the log line showing Docker returning 500 error condition; while we can probably handle it gracefully without retrying, the retry is very cheap in this case and it's more of an optimization that we can handle in follow up PR.
```
testlog.go:32: 2018-12-14T14:57:52.626Z [DEBUG] docker/driver.go:852: docker: setting container startup command: task_name=nc-demo command="/bin/nc -l 127.0.0.1 -p 0"
testlog.go:32: 2018-12-14T14:57:52.626Z [DEBUG] docker/driver.go:866: docker: setting container name: task_name=nc-demo container_name=724a3e77-8b15-e657-f6aa-84c2d3243b18
testlog.go:32: 2018-12-14T14:57:52.694Z [INFO ] docker/driver.go:196: docker: created container: container_id=362b6ea183f3c4ce472d7d7571ca47023cea1df0f5eb920827921716f17718be
testlog.go:32: 2018-12-14T14:57:53.523Z [DEBUG] docker/driver.go:416: docker: failed to start container: container_id=362b6ea183f3c4ce472d7d7571ca47023cea1df0f5eb920827921716f17718be attempt=1 error="API error (500): {"message":"cannot start a stopped process: unknown"}
"
testlog.go:32: 2018-12-14T14:57:55.394Z [DEBUG] docker/driver.go:416: docker: failed to start container: container_id=362b6ea183f3c4ce472d7d7571ca47023cea1df0f5eb920827921716f17718be attempt=2 error="API error (500): {"message":"cannot start a stopped process: unknown"}
"
testlog.go:32: 2018-12-14T14:57:57.243Z [DEBUG] docker/driver.go:416: docker: failed to start container: container_id=362b6ea183f3c4ce472d7d7571ca47023cea1df0f5eb920827921716f17718be attempt=3 error="API error (500): {"message":"cannot start a stopped process: unknown"}
"
```
Using `:latest` tag is typically a cause of pain, as underlying image
changes behavior. Here, I'm switching to using a point release, and
re-updating the stored tarballs with it.
Sadly, when saving/loading images, the repo digeset is not supported:
https://github.com/moby/moby/issues/22011 ; but using point releases
should mitigate the problem.
The motivation here is that docker tests have some flakiness due to
accidental importing of `busybox:latest` which has `/bin/nc` that no
longer supports `-p 0`:
```
$ docker run -it --rm busybox /bin/nc -l 127.0.0.1 -p 0
Unable to find image 'busybox:latest' locally
latest: Pulling from library/busybox
Digest: sha256:2a03a6059f21e150ae84b0973863609494aad70f0a80eaeb64bddd8d92465812
Status: Downloaded newer image for busybox:latest
nc: bad local port '0'
```
Looks like older busybox versions (e.g. `busybox:1.24` do honor `-p 0`
as the test expect, but I would rather update busybox to fix.
* master: (71 commits)
Fix output of 'nomad deployment fail' with no arg
Always create a running allocation when testing task state
tests: ensure exec tests pass valid task resources (#4992)
some changes for more idiomatic code
fix iops related tests
fixed bug in loop delay
gofmt
improved code for readability
client: updateAlloc release lock after read
fixup! device attributes in `nomad node status -verbose`
drivers/exec: support device binds and mounts
fix iops bug and increase test matrix coverage
tests: tag image explicitly
changelog
ci: install lxc-templates explicitly
tests: skip checking rdma cgroup
ci: use Ubuntu 16.04 (Xenial) in TravisCI
client: update driver info on new fingerprint
drivers/docker: enforce volumes.enabled (#4983)
client: Style: use fluent style for building loggers
...
Prior to 97f33bb1537d04905cb84199672bcdf46ebb4e65, executor cgroup validation errors were
silently ignored. Enforcing them reveals test cases that missed them.
This doesn't change customer facing contract, as resource struct is
is either configured or we default to 100 (much higher than 2).
Noticed few places where tests seem to block indefinitely and panic
after the test run reaches the test package timeout.
I intend to follow up with the proper fix later, but timing out is much
better than indefinitely blocking.
Update rawexec and rkt stop/kill tests with the patterns introduced in
7a49e9b68e519050a0c2ef0b67c33503bfbc51be. This implementation should be
more resilient to discrepancy between task stopping and task being marked as exited.
Using statically linked busybox binary to setup a basic rootfs for
testing, by symlinking it to provide the basic commands used in tests.
I considered using a proper rootfs tarball, but the overhead of managing
tarfile and expanding it seems significant enough that I went with this
implementation.
IOPS have been modelled as a resource since Nomad 0.1 but has never
actually been detected and there is no plan in the short term to add
detection. This is because IOPS is a bit simplistic of a unit to define
the performance requirements from the underlying storage system. In its
current state it adds unnecessary confusion and can be removed without
impacting any users. This PR leaves IOPS defined at the jobspec parsing
level and in the api/ resources since these are the two public uses of
the field. These should be considered deprecated and only exist to allow
users to stop using them during the Nomad 0.9.x release. In the future,
there should be no expectation that the field will exist.
Also, LXC requires target paths to be relative. Container paths in LXC
binds should never be absolute paths, so we strip any preceeding `/`,
even if a user sets one.
WaitForResult expects body to fail and retries few times before giving
up. Assertions inside the testfn body causes it to terminate abruptly
without retrying.
Some tests have containers that die almost immediately, and may die
and cleaned up before `driver.WaitUntilStarted` runs.
The causes for container dying seems special for each test:
* TestDockerDriver_Cleanup: `hello-world` image just emits a message and exits immediately
* TestDockerDriver_ForcePull_RepoDigest: the busybox image in `TestDockerDriver_ForcePull_RepoDigest` test didn't support `-p 0` argument
* TestDockerDriver_Entrypoint: with the entrypoint being `/bin/sh -c`, the command needs to be the entire string; otherwise, it ignores the comments
Currently, libcontainer-based executor, upon shutdown, kills the
container initial process. The children of the killed process remain
running, and the executor is never marked as terminated until they do.
Also, fix a case where we treat processes as successful, when
`proc.Wait()` fails. In some attempts, I was getting "waitid no child
processes" errors and such error shouldn't get process to be considered
successful.
this allows us to drop a cyclical import, but is subobptimal as it
requires BaseDriver tests to move. This falls firmly into the realm of
being a hack. Alternatives welcome.
This removes a cyclical dependency when importing client/structs from
dependencies of the plugin_loader, specifically, drivers. Due to
client/config also depending on the plugin_loader.
It also better reflects the ownership of fingerprint structs, as they
are fairly internal to the fingerprint manager.
As part of deprecating legacy drivers, we're moving the env package to a
new drivers/shared tree, as it is used by the modern docker and rkt
driver packages, and is useful for 3rd party plugins.
This allows the container to be tagged with a user friendly image name
(e.g. `redis:3.2`) rather than the image ID (e.g.
`sha256:87856cc39862cec77541d68382e4867d7ccb29a85a17221446c857ddaebca916`).
Useful for human debugging, as well as some debugging and image scanning
tools.
This risks two bad changes:
1. Discrepancy in image resolution between docker and Nomad's image
loader.
* I checked the image creation paths in Nomad, and noticed that we
either pulled the image or inspect the image with the user provided
name.
2. A race in image tagging where the tag is modified between image
loading and container creation.
* I, personally, don't think this case is cause for concern, as it is
analogous to the task running a bit later. As long as the image is
still present, creating the container should be good.
Danielle Tomlinson