Apply smaller suggestions like doc strings, variable names, etc.
Co-Authored-By: Nick Ethier <nethier@hashicorp.com>
Co-Authored-By: Michael Schurter <mschurter@hashicorp.com>
Nomad jobs may be configured with a TaskGroup which contains a Service
definition that is Consul Connect enabled. These service definitions end
up establishing a Consul Connect Proxy Task (e.g. envoy, by default). In
the case where Consul ACLs are enabled, a Service Identity token is required
for these tasks to run & connect, etc. This changeset enables the Nomad Server
to recieve RPC requests for the derivation of SI tokens on behalf of instances
of Consul Connect using Tasks. Those tokens are then relayed back to the
requesting Client, which then injects the tokens in the secrets directory of
the Task.
When a job is configured with Consul Connect aware tasks (i.e. sidecar),
the Nomad Client should be able to request from Consul (through Nomad Server)
Service Identity tokens specific to those tasks.
Enable any Server to lookup the unique ClusterID. If one has not been
generated, and this node is the leader, generate a UUID and attempt to
apply it through raft.
The value is not yet used anywhere in this changeset, but is a prerequisite
for gh-6701.
This change provides an initial pass at setting up the configuration necessary to
enable use of Connect with Consul ACLs. Operators will be able to pass in a Consul
Token through `-consul-token` or `$CONSUL_TOKEN` in the `job run` and `job revert`
commands (similar to Vault tokens).
These values are not actually used yet in this changeset.
Introduce limits to prevent unauthorized users from exhausting all
ephemeral ports on agents:
* `{https,rpc}_handshake_timeout`
* `{http,rpc}_max_conns_per_client`
The handshake timeout closes connections that have not completed the TLS
handshake by the deadline (5s by default). For RPC connections this
timeout also separately applies to first byte being read so RPC
connections with TLS enabled have `rpc_handshake_time * 2` as their
deadline.
The connection limit per client prevents a single remote TCP peer from
exhausting all ephemeral ports. The default is 100, but can be lowered
to a minimum of 26. Since streaming RPC connections create a new TCP
connection (until MultiplexV2 is used), 20 connections are reserved for
Raft and non-streaming RPCs to prevent connection exhaustion due to
streaming RPCs.
All limits are configurable and may be disabled by setting them to `0`.
This also includes a fix that closes connections that attempt to create
TLS RPC connections recursively. While only users with valid mTLS
certificates could perform such an operation, it was added as a
safeguard to prevent programming errors before they could cause resource
exhaustion.
Allows addressing servers with nomad monitor using the servers name or
ID.
Also unifies logic for addressing servers for client_agent_endpoint
commands and makes addressing logic region aware.
rpc getServer test
Fixes a deadlock in leadership handling if leadership flapped.
Raft propagates leadership transition to Nomad through a NotifyCh channel.
Raft blocks when writing to this channel, so channel must be buffered or
aggressively consumed[1]. Otherwise, Raft blocks indefinitely in `raft.runLeader`
until the channel is consumed[1] and does not move on to executing follower
related logic (in `raft.runFollower`).
While Raft `runLeader` defer function blocks, raft cannot process any other
raft operations. For example, `run{Leader|Follower}` methods consume
`raft.applyCh`, and while runLeader defer is blocked, all raft log applications
or config lookup will block indefinitely.
Sadly, `leaderLoop` and `establishLeader` makes few Raft calls!
`establishLeader` attempts to auto-create autopilot/scheduler config [3]; and
`leaderLoop` attempts to check raft configuration [4]. All of these calls occur
without a timeout.
Thus, if leadership flapped quickly while `leaderLoop/establishLeadership` is
invoked and hit any of these Raft calls, Raft handler _deadlock_ forever.
Depending on how many times it flapped and where exactly we get stuck, I suspect
it's possible to get in the following case:
* Agent metrics/stats http and RPC calls hang as they check raft.Configurations
* raft.State remains in Leader state, and server attempts to handle RPC calls
(e.g. node/alloc updates) and these hang as well
As we create goroutines per RPC call, the number of goroutines grow over time
and may trigger a out of memory errors in addition to missed updates.
[1] d90d6d6bda/config.go (L190-L193)
[2] d90d6d6bda/raft.go (L425-L436)
[3] 2a89e47746/nomad/leader.go (L198-L202)
[4] 2a89e47746/nomad/leader.go (L877)
Passes in agent enable_debug config to nomad server and client configs.
This allows for rpc endpoints to have more granular control if they
should be enabled or not in combination with ACLs.
enable debug on client test
This commit ensures that Alloc.AllocatedResources is properly populated
when read from persistence stores (namely Raft and client state store).
The alloc struct may have been written previously by an arbitrary old
version that may only populate Alloc.TaskResources.
When parsing a config file which had the consul.timeout param set,
Nomad was reporting an error causing startup to fail. This seems
to be caused by the HCL decoder interpreting the timeout type as
an int rather than a string. This is caused by the struct
TimeoutHCL param having a hcl key of timeout alongside a Timeout
struct param of type time.Duration (int). Ensuring the decoder
ignores the Timeout struct param ensure the decoder runs
correctly.
copy struct values
ensure groupserviceHook implements RunnerPreKillhook
run deregister first
test that shutdown times are delayed
move magic number into variable
Avoid logging in the `watch` function as much as possible, since
it is not waited on during a server shutdown. When the logger
logs after a test passes, it may or may not cause the testing
framework to panic.
More info in:
https://github.com/golang/go/issues/29388#issuecomment-453648436
Fixes#6853
Canonicalize jobs first before adding any sidecars. This fixes a bug
where sidecar tasks were added without interpolated names and broke
validation. Sidecar tasks must be canonicalized independently.
Also adds a group network to the mock connect job because it wasn't a
valid connect job before!
It has been decided we're going to live in a many core world.
Let's take advantage of that and parallelize these state store
tests which all run in memory and are largely CPU bound.
An unscientific benchmark demonstrating the improvement:
[mp state (master)] $ go test
PASS
ok github.com/hashicorp/nomad/nomad/state 5.162s
[mp state (f-parallelize-state-store-tests)] $ go test
PASS
ok github.com/hashicorp/nomad/nomad/state 1.527s
Copy the updated version of freeport (sdk/freeport), and tweak it for use
in Nomad tests. This means staying below port 10000 to avoid conflicts with
the lib/freeport that is still transitively used by the old version of
consul that we vendor. Also provide implementations to find ephemeral ports
of macOS and Windows environments.
Ports acquired through freeport are supposed to be returned to freeport,
which this change now also introduces. Many tests are modified to include
calls to a cleanup function for Server objects.
This should help quite a bit with some flakey tests, but not all of them.
Our port problems will not go away completely until we upgrade our vendor
version of consul. With Go modules, we'll probably do a 'replace' to swap
out other copies of freeport with the one now in 'nomad/helper/freeport'.
If ACL Request is unauthenticated, we should honor the anonymous token.
This PR makes few changes:
* `GetPolicy` endpoints may return policy if anonymous policy allows it,
or return permission denied otherwise.
* `ListPolicies` returns an empty policy list, or one with anonymous
policy if one exists.
Without this PR, the we return an incomprehensible error.
Before:
```
$ curl http://localhost:4646/v1/acl/policy/doesntexist; echo
acl token lookup failed: index error: UUID must be 36 characters
$ curl http://localhost:4646/v1/acl/policies; echo
acl token lookup failed: index error: UUID must be 36 characters
```
After:
```
$ curl http://localhost:4646/v1/acl/policy/doesntexist; echo
Permission denied
$ curl http://localhost:4646/v1/acl/policies; echo
[]
```
Noticed that ACL endpoints return 500 status code for user errors. This
is confusing and can lead to false monitoring alerts.
Here, I introduce a concept of RPCCoded errors to be returned by RPC
that signal a code in addition to error message. Codes for now match
HTTP codes to ease reasoning.
```
$ nomad acl bootstrap
Error bootstrapping: Unexpected response code: 500 (ACL bootstrap already done (reset index: 9))
$ nomad acl bootstrap
Error bootstrapping: Unexpected response code: 400 (ACL bootstrap already done (reset index: 9))
```
The existing version constraint uses logic optimized for package
managers, not schedulers, when checking prereleases:
- 1.3.0-beta1 will *not* satisfy ">= 0.6.1"
- 1.7.0-rc1 will *not* satisfy ">= 1.6.0-beta1"
This is due to package managers wishing to favor final releases over
prereleases.
In a scheduler versions more often represent the earliest release all
required features/APIs are available in a system. Whether the constraint
or the version being evaluated are prereleases has no impact on
ordering.
This commit adds a new constraint - `semver` - which will use Semver
v2.0 ordering when evaluating constraints. Given the above examples:
- 1.3.0-beta1 satisfies ">= 0.6.1" using `semver`
- 1.7.0-rc1 satisfies ">= 1.6.0-beta1" using `semver`
Since existing jobspecs may rely on the old behavior, a new constraint
was added and the implicit Consul Connect and Vault constraints were
updated to use it.
* client: improve group service stanza interpolation and check_restart support
Interpolation can now be done on group service stanzas. Note that some task runtime specific information
that was previously available when the service was registered poststart of a task is no longer available.
The check_restart stanza for checks defined on group services will now properly restart the allocation upon
check failures if configured.
handle the case where we request a server-id which is this current server
update docs, error on node and server id params
more accurate names for tests
use shared no leader err, formatting
rm bad comment
remove redundant variable
There's a bug in version parsing that breaks this constraint when using
a prerelease enterprise version of Vault (eg 1.3.0-beta1+ent). While
this does not fix the underlying bug it does provide a workaround for
future issues related to the implicit constraint. Like the implicit
Connect constraint: *all* implicit constraints should be overridable to
allow users to workaround bugs or other factors should the need arise.
Adds new package that can be used by client and server RPC endpoints to
facilitate monitoring based off of a logger
clean up old code
small comment about write
rm old comment about minsize
rename to Monitor
Removes connection logic from monitor command
Keep connection logic in endpoints, use a channel to send results from
monitoring
use new multisink logger and interfaces
small test for dropped messages
update go-hclogger and update sink/intercept logger interfaces
Fixes typo in word "failed".
Fixes bug where incorrect error is printed. The old code would only
ever print a nil error, instead of the validationErr which is being
created.
`admissionValidators` doesn't aggregate errors correctly, as it
aggregates errors in `errs` reference yet it always returns the nil
`err`.
Here, we avoid shadowing `err`, and move variable declarations to where
they are used.
`groupConnectHook` assumes that Networks is a non-empty slice, but TG
hasn't been validated yet and validation may depend on mutation results.
As such, we do basic check here before dereferencing network slice
elements.
Vault 1.2.0 deprecated `period` field in favor of `token_period` in auth
role:
> * Token store roles use new, common token fields for the values
> that overlap with other auth backends. `period`, `explicit_max_ttl`, and
> `bound_cidrs` will continue to work, with priority being given to the
> `token_` prefixed versions of those parameters. They will also be returned
> when doing a read on the role if they were used to provide values initially;
> however, in Vault 1.4 if `period` or `explicit_max_ttl` is zero they will no
> longer be returned. (`explicit_max_ttl` was already not returned if empty.)
https://github.com/hashicorp/vault/blob/master/CHANGELOG.md#120-july-30th-2019
This commit introduces support for configuring mount propagation when
mounting volumes with the `volume_mount` stanza on Linux targets.
Similar to Kubernetes, we expose 3 options for configuring mount
propagation:
- private, which is equivalent to `rprivate` on Linux, which does not allow the
container to see any new nested mounts after the chroot was created.
- host-to-task, which is equivalent to `rslave` on Linux, which allows new mounts
that have been created _outside of the container_ to be visible
inside the container after the chroot is created.
- bidirectional, which is equivalent to `rshared` on Linux, which allows both
the container to see new mounts created on the host, but
importantly _allows the container to create mounts that are
visible in other containers an don the host_
private and host-to-task are safe, but bidirectional mounts can be
dangerous, as if the code inside a container creates a mount, and does
not clean it up before tearing down the container, it can cause bad
things to happen inside the kernel.
To add a layer of safety here, we require that the user has ReadWrite
permissions on the volume before allowing bidirectional mounts, as a
defense in depth / validation case, although creating mounts should also require
a priviliged execution environment inside the container.
Fix a bug where a millicious user can access or manipulate an alloc in a
namespace they don't have access to. The allocation endpoints perform
ACL checks against the request namespace, not the allocation namespace,
and performs the allocation lookup independently from namespaces.
Here, we check that the requested can access the alloc namespace
regardless of the declared request namespace.
Ideally, we'd enforce that the declared request namespace matches
the actual allocation namespace. Unfortunately, we haven't documented
alloc endpoints as namespaced functions; we suspect starting to enforce
this will be very disruptive and inappropriate for a nomad point
release. As such, we maintain current behavior that doesn't require
passing the proper namespace in request. A future major release may
start enforcing checking declared namespace.
In a job registration request, ensure that the request namespace "header" and job
namespace field match. This should be the case already in prod, as http
handlers ensures that the values match [1].
This mitigates bugs that exploit bugs where we may check a value but act
on another, resulting into bypassing ACL system.
[1] https://github.com/hashicorp/nomad/blob/v0.9.5/command/agent/job_endpoint.go#L415-L418
Without a `LocalServicePort`, Connect services will try to use the
mapped port even when delivering traffic locally. A user can override
this behavior by pinning the port value in the `service` stanza but
this prevents us from using the Consul service name to reach the
service.
This commits configures the Consul proxy with its `LocalServicePort`
and `LocalServiceAddress` fields.
Currently, using a Volume in a job uses the following configuration:
```
volume "alias-name" {
type = "volume-type"
read_only = true
config {
source = "host_volume_name"
}
}
```
This commit migrates to the following:
```
volume "alias-name" {
type = "volume-type"
source = "host_volume_name"
read_only = true
}
```
The original design was based due to being uncertain about the future of storage
plugins, and to allow maxium flexibility.
However, this causes a few issues, namely:
- We frequently need to parse this configuration during submission,
scheduling, and mounting
- It complicates the configuration from and end users perspective
- It complicates the ability to do validation
As we understand the problem space of CSI a little more, it has become
clear that we won't need the `source` to be in config, as it will be
used in the majority of cases:
- Host Volumes: Always need a source
- Preallocated CSI Volumes: Always needs a source from a volume or claim name
- Dynamic Persistent CSI Volumes*: Always needs a source to attach the volumes
to for managing upgrades and to avoid dangling.
- Dynamic Ephemeral CSI Volumes*: Less thought out, but `source` will probably point
to the plugin name, and a `config` block will
allow you to pass meta to the plugin. Or will
point to a pre-configured ephemeral config.
*If implemented
The new design simplifies this by merging the source into the volume
stanza to solve the above issues with usability, performance, and error
handling.
This is an attempt to ease dependency management for external driver
plugins, by avoiding requiring them to compile ugorji/go generated
files. Plugin developers reported some pain with the brittleness of
ugorji/go dependency in particular, specially when using go mod, the
default go mod manager in golang 1.13.
Context
--------
Nomad uses msgpack to persist and serialize internal structs, using
ugorji/go library. As an optimization, we use ugorji/go code generation
to speedup process and aovid the relection-based slow path.
We commit these generated files in repository when we cut and tag the
release to ease reproducability and debugging old releases. Thus,
downstream projects that depend on release tag, indirectly depends on
ugorji/go generated code.
Sadly, the generated code is brittle and specific to the version of
ugorji/go being used. When go mod picks another version of ugorji/go
then nomad (go mod by default uses release according to semver),
downstream projects face compilation errors.
Interestingly, downstream projects don't commonly serialize nomad
internal structs. Drivers and device plugins use grpc instead of
msgpack for the most part. In the few cases where they use msgpag (e.g.
decoding task config), they do without codegen path as they run on
driver specific structs not the nomad internal structs. Also, the
ugorji/go serialization through reflection is generally backward
compatible (mod some ugorji/go regression bugs that get introduced every
now and then :( ).
Proposal
---------
The proposal here is to keep committing ugorji/go codec generated files
for releases but to use a go tag for them.
All nomad development through the makefile, including releasing, CI and
dev flow, has the tag enabled.
Downstream plugin projects, by default, will skip these files and life
proceed as normal for them.
The downside is that nomad developers who use generated code but avoid
using make must start passing additional go tag argument. Though this
is not a blessed configuration.
Tests typically call join cluster directly rather than rely on consul
discovery. Worse, consul discovery seems to cause additional leadership
transitions when a server is shutdown in tests than tests expect.
* connect: add unix socket to proxy grpc for envoy
Fixes#6124
Implement a L4 proxy from a unix socket inside a network namespace to
Consul's gRPC endpoint on the host. This allows Envoy to connect to
Consul's xDS configuration API.
* connect: pointer receiver on structs with mutexes
* connect: warn on all proxy errors
* taskenv: add connect upstream env vars + test
* set taskenv upstreams instead of appending
* Update client/taskenv/env.go
Co-Authored-By: Michael Schurter <mschurter@hashicorp.com>
* adds meta object to service in job spec, sends it to consul
* adds tests for service meta
* fix tests
* adds docs
* better hashing for service meta, use helper for copying meta when registering service
* tried to be DRY, but looks like it would be more work to use the
helper function
Fixes#6041
Unlike all other Consul operations, boostrapping requires Consul be
available. This PR tries Consul 3 times with a backoff to account for
the group services being asynchronously registered with Consul.
