This PR enables job submitters to use interpolation in the connect
block of jobs making use of consul connect. Before, only the name of
the connect service would be interpolated, and only for a few select
identifiers related to the job itself (#6853). Now, all connect fields
can be interpolated using the full spectrum of runtime parameters.
Note that the service name is interpolated at job-submission time,
and cannot make use of values known only at runtime.
Fixes#7221
* upsertaclpolicies
* delete acl policies msgtype
* upsert acl policies msgtype
* delete acl tokens msgtype
* acl bootstrap msgtype
wip unsubscribe on token delete
test that subscriptions are closed after an ACL token has been deleted
Start writing policyupdated test
* update test to use before/after policy
* add SubscribeWithACLCheck to run acl checks on subscribe
* update rpc endpoint to use broker acl check
* Add and use subscriptions.closeSubscriptionFunc
This fixes the issue of not being able to defer unlocking the mutex on
the event broker in the for loop.
handle acl policy updates
* rpc endpoint test for terminating acl change
* add comments
Co-authored-by: Kris Hicks <khicks@hashicorp.com>
* use msgtype in upsert node
adds message type to signature for upsert node, update tests, remove placeholder method
* UpsertAllocs msg type test setup
* use upsertallocs with msg type in signature
update test usage of delete node
delete placeholder msgtype method
* add msgtype to upsert evals signature, update test call sites with test setup msg type
handle snapshot upsert eval outside of FSM and ignore eval event
remove placeholder upsertevalsmsgtype
handle job plan rpc and prevent event creation for plan
msgtype cleanup upsertnodeevents
updatenodedrain msgtype
msg type 0 is a node registration event, so set the default to the ignore type
* fix named import
* fix signature ordering on upsertnode to match
When defining a script-check in a group-level service, Nomad needs to
know which task is associated with the check so that it can use the
correct task driver to execute the check.
This PR fixes two bugs:
1) validate service.task or service.check.task is configured
2) make service.check.task inherit service.task if it is itself unset
Fixes#8952
This PR adds initial support for running Consul Connect Ingress Gateways (CIGs) in Nomad. These gateways are declared as part of a task group level service definition within the connect stanza.
```hcl
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
ingress {
// ingress-gateway configuration entry
}
}
}
}
```
A gateway can be run in `bridge` or `host` networking mode, with the caveat that host networking necessitates manually specifying the Envoy admin listener (which cannot be disabled) via the service port value.
Currently Envoy is the only supported gateway implementation in Consul, and Nomad only supports running Envoy as a gateway using the docker driver.
Aims to address #8294 and tangentially #8647
Fixes https://github.com/hashicorp/nomad/issues/8544
This PR fixes a bug where using `nomad job plan ...` always report no change if the submitted job contain scaling.
The issue has three contributing factors:
1. The plan endpoint doesn't populate the required scaling policy ID; unlike the job register endpoint
2. The plan endpoint suppresses errors on job insertion - the job insertion fails here, because the scaling policy is missing the required ID
3. The scheduler reports no update necessary when the relevant job isn't in store (because the insertion failed)
This PR fixes the first two factors. Changing the scheduler to be more strict might make sense, but may violate some idempotency invariant or make the scheduler more brittle.
adds in oss components to support enterprise multi-vault namespace feature
upgrade specific doc on vault multi-namespaces
vault docs
update test to reflect new error
This fixes a bug where jobs may get "stuck" unprocessed that
dispropotionately affect periodic jobs around leadership transitions.
When registering a job, the job registration and the eval to process it
get applied to raft as two separate transactions; if the job
registration succeeds but eval application fails, the job may remain
unprocessed. Operators may detect such failure, when submitting a job
update and get a 500 error code, and they could retry; periodic jobs
failures are more likely to go unnoticed, and no further periodic
invocations will be processed until an operator force evaluation.
This fixes the issue by ensuring that the job registration and eval
application get persisted and processed atomically in the same raft log
entry.
Also, applies the same change to ensure atomicity in job deregistration.
Backward Compatibility
We must maintain compatibility in two scenarios: mixed clusters where a
leader can handle atomic updates but followers cannot, and a recent
cluster processes old log entries from legacy or mixed cluster mode.
To handle this constraints: ensure that the leader continue to emit the
Evaluation log entry until all servers have upgraded; also, when
processing raft logs, the servers honor evaluations found in both spots,
the Eval in job (de-)registration and the eval update entries.
When an updated server sees mix-mode behavior where an eval is inserted
into the raft log twice, it ignores the second instance.
I made one compromise in consistency in the mixed-mode scenario: servers
may disagree on the eval.CreateIndex value: the leader and updated
servers will report the job registration index while old servers will
report the index of the eval update log entry. This discripency doesn't
seem to be material - it's the eval.JobModifyIndex that matters.
Allow a `/v1/jobs?all_namespaces=true` to list all jobs across all
namespaces. The returned list is to contain a `Namespace` field
indicating the job namespace.
If ACL is enabled, the request token needs to be a management token or
have `namespace:list-jobs` capability on all existing namespaces.
An operator could submit a scale request including a negative count
value. This negative value caused the Nomad server to panic. The
fix adds validation to the submitted count, returning an error to
the caller if it is negative.
* nomad/state/state_store: error message copy/paste error
* nomad/structs/structs: add a VolumeEval to the JobDeregisterResponse
* nomad/job_endpoint: synchronously, volumeClaimReap on job Deregister
* nomad/core_sched: make volumeClaimReap available without a CoreSched
* nomad/job_endpoint: Deregister return early if the job is missing
* nomad/job_endpoint_test: job Deregistion is idempotent
* nomad/core_sched: conditionally ignore alloc status in volumeClaimReap
* nomad/job_endpoint: volumeClaimReap all allocations, even running
* nomad/core_sched_test: extra argument to collectClaimsToGCImpl
* nomad/job_endpoint: job deregistration is not idempotent
Part of #6120
Building on the support for enabling connect proxy paths in #7323, this change
adds the ability to configure the 'service.check.expose' flag on group-level
service check definitions for services that are connect-enabled. This is a slight
deviation from the "magic" that Consul provides. With Consul, the 'expose' flag
exists on the connect.proxy stanza, which will then auto-generate expose paths
for every HTTP and gRPC service check associated with that connect-enabled
service.
A first attempt at providing similar magic for Nomad's Consul Connect integration
followed that pattern exactly, as seen in #7396. However, on reviewing the PR
we realized having the `expose` flag on the proxy stanza inseperably ties together
the automatic path generation with every HTTP/gRPC defined on the service. This
makes sense in Consul's context, because a service definition is reasonably
associated with a single "task". With Nomad's group level service definitions
however, there is a reasonable expectation that a service definition is more
abstractly representative of multiple services within the task group. In this
case, one would want to define checks of that service which concretely make HTTP
or gRPC requests to different underlying tasks. Such a model is not possible
with the course `proxy.expose` flag.
Instead, we now have the flag made available within the check definitions themselves.
By making the expose feature resolute to each check, it is possible to have
some HTTP/gRPC checks which make use of the envoy exposed paths, as well as
some HTTP/gRPC checks which make use of some orthongonal port-mapping to do
checks on some other task (or even some other bound port of the same task)
within the task group.
Given this example,
group "server-group" {
network {
mode = "bridge"
port "forchecks" {
to = -1
}
}
service {
name = "myserver"
port = 2000
connect {
sidecar_service {
}
}
check {
name = "mycheck-myserver"
type = "http"
port = "forchecks"
interval = "3s"
timeout = "2s"
method = "GET"
path = "/classic/responder/health"
expose = true
}
}
}
Nomad will automatically inject (via job endpoint mutator) the
extrapolated expose path configuration, i.e.
expose {
path {
path = "/classic/responder/health"
protocol = "http"
local_path_port = 2000
listener_port = "forchecks"
}
}
Documentation is coming in #7440 (needs updating, doing next)
Modifications to the `countdash` examples in https://github.com/hashicorp/demo-consul-101/pull/6
which will make the examples in the documentation actually runnable.
Will add some e2e tests based on the above when it becomes available.
* acl/policy: add the volume ACL policies
* nomad/csi_endpoint: enforce ACLs for volume access
* nomad/search_endpoint_oss: volume acls
* acl/acl: add plugin read as a global policy
* acl/policy: add PluginPolicy global cap type
* nomad/csi_endpoint: check the global plugin ACL policy
* nomad/mock/acl: PluginPolicy
* nomad/csi_endpoint: fix list rebase
* nomad/core_sched_test: new test since #7358
* nomad/csi_endpoint_test: use correct permissions for list
* nomad/csi_endpoint: allowCSIMount keeps ACL checks together
* nomad/job_endpoint: check mount permission for jobs
* nomad/job_endpoint_test: need plugin read, too
Nomad jobs may be configured with a TaskGroup which contains a Service
definition that is Consul Connect enabled. These service definitions end
up establishing a Consul Connect Proxy Task (e.g. envoy, by default). In
the case where Consul ACLs are enabled, a Service Identity token is required
for these tasks to run & connect, etc. This changeset enables the Nomad Server
to recieve RPC requests for the derivation of SI tokens on behalf of instances
of Consul Connect using Tasks. Those tokens are then relayed back to the
requesting Client, which then injects the tokens in the secrets directory of
the Task.
Copy the updated version of freeport (sdk/freeport), and tweak it for use
in Nomad tests. This means staying below port 10000 to avoid conflicts with
the lib/freeport that is still transitively used by the old version of
consul that we vendor. Also provide implementations to find ephemeral ports
of macOS and Windows environments.
Ports acquired through freeport are supposed to be returned to freeport,
which this change now also introduces. Many tests are modified to include
calls to a cleanup function for Server objects.
This should help quite a bit with some flakey tests, but not all of them.
Our port problems will not go away completely until we upgrade our vendor
version of consul. With Go modules, we'll probably do a 'replace' to swap
out other copies of freeport with the one now in 'nomad/helper/freeport'.
The existing version constraint uses logic optimized for package
managers, not schedulers, when checking prereleases:
- 1.3.0-beta1 will *not* satisfy ">= 0.6.1"
- 1.7.0-rc1 will *not* satisfy ">= 1.6.0-beta1"
This is due to package managers wishing to favor final releases over
prereleases.
In a scheduler versions more often represent the earliest release all
required features/APIs are available in a system. Whether the constraint
or the version being evaluated are prereleases has no impact on
ordering.
This commit adds a new constraint - `semver` - which will use Semver
v2.0 ordering when evaluating constraints. Given the above examples:
- 1.3.0-beta1 satisfies ">= 0.6.1" using `semver`
- 1.7.0-rc1 satisfies ">= 1.6.0-beta1" using `semver`
Since existing jobspecs may rely on the old behavior, a new constraint
was added and the implicit Consul Connect and Vault constraints were
updated to use it.
* client: improve group service stanza interpolation and check_restart support
Interpolation can now be done on group service stanzas. Note that some task runtime specific information
that was previously available when the service was registered poststart of a task is no longer available.
The check_restart stanza for checks defined on group services will now properly restart the allocation upon
check failures if configured.
There's a bug in version parsing that breaks this constraint when using
a prerelease enterprise version of Vault (eg 1.3.0-beta1+ent). While
this does not fix the underlying bug it does provide a workaround for
future issues related to the implicit constraint. Like the implicit
Connect constraint: *all* implicit constraints should be overridable to
allow users to workaround bugs or other factors should the need arise.
