* Demoable state
* Demo mirage color
* Label as a block with foreground and background colours
* Test mock updates
* Go test updated
* Documentation update for label support
Service jobs should have unique allocation Names, derived from the
Job.ID. System jobs do not have unique allocation Names because the index is
intended to indicated the instance out of a desired count size. Because system
jobs do not have an explicit count but the results are based on the targeted
nodes, the index is less informative and this was intentionally omitted from the
original design.
Update docs to make it clear that NOMAD_ALLOC_INDEX is always zero for
system/sysbatch jobs
Validate that `volume.per_alloc` is incompatible with system/sysbatch jobs.
System and sysbatch jobs always have a `NOMAD_ALLOC_INDEX` of 0. So
interpolation via `per_alloc` will not work as soon as there's more than one
allocation placed. Validate against this on job submission.
* largely a doc-ification of this commit message:
d47678074bf8ae9ff2da3c91d0729bf03aee8446
this doesn't spell out all the possible failure modes,
but should be a good starting point for folks.
* connect: add doc link to envoy bootstrap error
* add Unwrap() to RecoverableError
mainly for easier testing
Add `identity` jobspec block to expose workload identity tokens to tasks.
---------
Co-authored-by: Anders <mail@anars.dk>
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
* Extend variables under the nomad path prefix to allow for job-templates (#15570)
* Extend variables under the nomad path prefix to allow for job-templates
* Add job-templates to error message hinting
* RadioCard component for Job Templates (#15582)
* chore: add
* test: component API
* ui: component template
* refact: remove bc naming collission
* styles: remove SASS var causing conflicts
* Disallow specific variable at nomad/job-templates (#15681)
* Disallows variables at exactly nomad/job-templates
* idiomatic refactor
* Expanding nomad job init to accept a template flag (#15571)
* Adding a string flag for templates on job init
* data-down actions-up version of a custom template editor within variable
* Dont force grid on job template editor
* list-templates flag started
* Correctly slice from end of path name
* Pre-review cleanup
* Variable form acceptance test for job template editing
* Some review cleanup
* List Job templates test
* Example from template test
* Using must.assertions instead of require etc
* ui: add choose template button (#15596)
* ui: add new routes
* chore: update file directory
* ui: add choose template button
* test: button and page navigation
* refact: update var name
* ui: use `Button` component from `HDS` (#15607)
* ui: integrate buttons
* refact: remove helper
* ui: remove icons on non-tertiary buttons
* refact: update normalize method for key/value pairs (#15612)
* `revert`: `onCancel` for `JobDefinition`
The `onCancel` method isn't included in the component API for `JobEditor` and the primary cancel behavior exists outside of the component. With the exception of the `JobDefinition` page where we include this button in the top right of the component instead of next to the `Plan` button.
* style: increase button size
* style: keep lime green
* ui: select template (#15613)
* ui: deprecate unused component
* ui: deprecate tests
* ui: jobs.run.templates.index
* ui: update logic to handle templates
* refact: revert key/value changes
* style: padding for cards + buttons
* temp: fixtures for mirage testing
* Revert "refact: revert key/value changes"
This reverts commit 124e95d12140be38fc921f7e15243034092c4063.
* ui: guard template for unsaved job
* ui: handle reading template variable
* Revert "refact: update normalize method for key/value pairs (#15612)"
This reverts commit 6f5ffc9b610702aee7c47fbff742cc81f819ab74.
* revert: remove test fixtures
* revert: prettier problems
* refact: test doesnt need filter expression
* styling: button sizes and responsive cards
* refact: remove route guarding
* ui: update variable adapter
* refact: remove model editing behavior
* refact: model should query variables to populate editor
* ui: clear qp on exit
* refact: cleanup deprecated API
* refact: query all namespaces
* refact: deprecate action
* ui: rely on collection
* refact: patch deprecate transition API
* refact: patch test to expect namespace qp
* styling: padding, conditionals
* ui: flashMessage on 404
* test: update for o(n+1) query
* ui: create new job template (#15744)
* refact: remove unused code
* refact: add type safety
* test: select template flow
* test: add data-test attrs
* chore: remove dead code
* test: create new job flow
* ui: add create button
* ui: create job template
* refact: no need for wildcard
* refact: record instead of delete
* styling: spacing
* ui: add error handling and form validation to job create template (#15767)
* ui: handle server side errors
* ui: show error to prevent duplicate
* refact: conditional namespace
* ui: save as template flow (#15787)
* bug: patches failing tests associated with `pretender` (#15812)
* refact: update assertion
* refact: test set-up
* ui: job templates manager view (#15815)
* ui: manager list view
* test: edit flow
* refact: deprecate column-helper
* ui: template edit and delete flow (#15823)
* ui: manager list view
* refact: update title
* refact: update permissions
* ui: template edit page
* bug: typo
* refact: update toast messages
* bug: clear selections on exit (#15827)
* bug: clear controllers on exit
* test: mirage config changes (#15828)
* refact: deprecate column-helper
* style: update z-index for HDS
* Revert "style: update z-index for HDS"
This reverts commit d3d87ceab6d083f7164941587448607838944fc1.
* refact: update delete button
* refact: edit redirect
* refact: patch reactivity issues
* styling: fixed width
* refact: override defaults
* styling: edit text causing overflow
* styling: add inline text
Co-authored-by: Phil Renaud <phil.renaud@hashicorp.com>
* bug: edit `text` to `template`
Co-authored-by: Phil Renaud <phil.renaud@hashicorp.com>
Co-authored-by: Phil Renaud <phil.renaud@hashicorp.com>
* test: delete flow job templates (#15896)
* refact: edit names
* bug: set correct ref to store
* chore: trim whitespace:
* test: delete flow
* bug: reactively update view (#15904)
* Initialized default jobs (#15856)
* Initialized default jobs
* More jobs scaffolded
* Better commenting on a couple example job specs
* Adapter doing the work
* fall back to epic config
* Label format helper and custom serialization logic
* Test updates to account for a never-empty state
* Test suite uses settled and maintain RecordArray in adapter return
* Updates to hello-world and variables example jobspecs
* Parameterized job gets optional payload output
* Formatting changes for param and service discovery job templates
* Multi-group service discovery job
* Basic test for default templates (#15965)
* Basic test for default templates
* Percy snapshot for manage page
* Some late-breaking design changes
* Some copy edits to the header paragraphs for job templates (#15967)
* Added some init options for job templates (#15994)
* Async method for populating default job templates from the variable adapter
---------
Co-authored-by: Jai <41024828+ChaiWithJai@users.noreply.github.com>
The ACL token decoding was not correctly handling time duration
syntax such as "1h" which forced people to use the nanosecond
representation via the HTTP API.
The change adds an unmarshal function which allows this syntax to
be used, along with other styles correctly.
Prior to 2409f72 the code compared the modification index of a job to itself. Afterwards, the code compared the creation index of the job to itself. In either case there should never be a case of re-parenting of allocs causing the evaluation to trivially always result in false, which leads to unreclaimable memory.
Prior to this change allocations and evaluations for batch jobs were never garbage collected until the batch job was explicitly stopped. The new `batch_eval_gc_threshold` server configuration controls how often they are collected. The default threshold is `24h`.
When registering a job with a service and 'consul.allow_unauthenticated=false',
we scan the given Consul token for an acceptable policy or role with an
acceptable policy, but did not scan for an acceptable service identity (which
is backed by an acceptable virtual policy). This PR updates our consul token
validation to also accept a matching service identity when registering a service
into Consul.
Fixes#15902
Also tightens up authentication for these endpoints by enforcing the server
certificate name is valid. We protect these endpoints currently by mTLS and
can't use an auth token because these endpoints are (uniquely) called by the
leader and followers for a given node won't have the leader's ephemeral ACL
token. Add a certificate name check that requests come from a server and not a
client, because no client should ever send these RPCs directly.
Disallowing per_alloc for host volumes in some cases makes life of a nomad user much harder.
When we rely on the NOMAD_ALLOC_INDEX for any configuration that needs to be re-used across
restarts we need to make sure allocation placement is consistent. With CSI volumes we can
use the `per_alloc` feature but for some reason this is explicitly disabled for host volumes.
Ensure host volumes understand the concept of per_alloc
This changeset configures the RPC rate metrics that were added in #15515 to all
the RPCs that support authenticated HTTP API requests. These endpoints already
configured with pre-forwarding authentication in #15870, and a handful of others
were done already as part of the proof-of-concept work. So this changeset is
entirely copy-and-pasting one method call into a whole mess of handlers.
Upcoming PRs will wire up pre-forwarding auth and rate metrics for the remaining
set of RPCs that have no API consumers or aren't authenticated, in smaller
chunks that can be more thoughtfully reviewed.
When a Nomad client that is running an allocation with
`max_client_disconnect` set misses a heartbeat the Nomad server will
update its status to `disconnected`.
Upon reconnecting, the client will make three main RPC calls:
- `Node.UpdateStatus` is used to set the client status to `ready`.
- `Node.UpdateAlloc` is used to update the client-side information about
allocations, such as their `ClientStatus`, task states etc.
- `Node.Register` is used to upsert the entire node information,
including its status.
These calls are made concurrently and are also running in parallel with
the scheduler. Depending on the order they run the scheduler may end up
with incomplete data when reconciling allocations.
For example, a client disconnects and its replacement allocation cannot
be placed anywhere else, so there's a pending eval waiting for
resources.
When this client comes back the order of events may be:
1. Client calls `Node.UpdateStatus` and is now `ready`.
2. Scheduler reconciles allocations and places the replacement alloc to
the client. The client is now assigned two allocations: the original
alloc that is still `unknown` and the replacement that is `pending`.
3. Client calls `Node.UpdateAlloc` and updates the original alloc to
`running`.
4. Scheduler notices too many allocs and stops the replacement.
This creates unnecessary placements or, in a different order of events,
may leave the job without any allocations running until the whole state
is updated and reconciled.
To avoid problems like this clients must update _all_ of its relevant
information before they can be considered `ready` and available for
scheduling.
To achieve this goal the RPC endpoints mentioned above have been
modified to enforce strict steps for nodes reconnecting:
- `Node.Register` does not set the client status anymore.
- `Node.UpdateStatus` sets the reconnecting client to the `initializing`
status until it successfully calls `Node.UpdateAlloc`.
These changes are done server-side to avoid the need of additional
coordination between clients and servers. Clients are kept oblivious of
these changes and will keep making these calls as they normally would.
The verification of whether allocations have been updates is done by
storing and comparing the Raft index of the last time the client missed
a heartbeat and the last time it updated its allocations.
This changeset allows Workload Identities to authenticate to all the RPCs that
support HTTP API endpoints, for use with PR #15864.
* Extends the work done for pre-forwarding authentication to all RPCs that
support a HTTP API endpoint.
* Consolidates the auth helpers used by the CSI, Service Registration, and Node
endpoints that are currently used to support both tokens and client secrets.
Intentionally excluded from this changeset:
* The Variables endpoint still has custom handling because of the implicit
policies. Ideally we'll figure out an efficient way to resolve those into real
policies and then we can get rid of that custom handling.
* The RPCs that don't currently support auth tokens (i.e. those that don't
support HTTP endpoints) have not been updated with the new pre-forwarding auth
We'll be doing this under a separate PR to support RPC rate metrics.
If a consumer of the new `Authenticate` method gets passed a bogus token that's
a correctly-shaped UUID, it will correctly get an identity without a ACL
token. But most consumers will then panic when they consume this nil `ACLToken`
for authorization.
Because no API client should ever send a bogus auth token, update the
`Authenticate` method to create the identity with remote IP (for metrics
tracking) but also return an `ErrPermissionDenied`.
Implement a metric for RPC requests with labels on the identity, so that
administrators can monitor the source of requests within the cluster. This
changeset demonstrates the change with the new `ACL.WhoAmI` RPC, and we'll wire
up the remaining RPCs once we've threaded the new pre-forwarding authentication
through the all.
Note that metrics are measured after we forward but before we return any
authentication error. This ensures that we only emit metrics on the server that
actually serves the request. We'll perform rate limiting at the same place.
Includes telemetry configuration to omit identity labels.
In #15417 we added a new `Authenticate` method to the server that returns an
`AuthenticatedIdentity` struct. This changeset implements this method for a
small number of RPC endpoints that together represent all the various ways in
which RPCs are sent, so that we can validate that we're happy with this
approach.
Upon dequeuing an evaluation workers snapshot their state store at the
eval's wait index or later. This ensures we process an eval at a point
in time after it was created or updated. Processing an eval on an old
snapshot could cause any number of problems such as:
1. Since job registration atomically updates an eval and job in a single
raft entry, scheduling against indexes before that may not have the
eval's job or may have an older version.
2. The older the scheduler's snapshot, the higher the likelihood
something has changed in the cluster state which will cause the plan
applier to reject the scheduler's plan. This could waste work or
even cause eval's to be failed needlessly.
However, the workers run in parallel with a new server pulling the
cluster state from a peer. During this time, which may be many minutes
long, the state store is likely far behind the minimum index required
to process evaluations.
This PR addresses this by adding an additional long backoff period after
an eval is nacked. If the scheduler's indexes catches up within the
additional backoff, it will unblock early to dequeue the next eval.
When the server shuts down we'll get a `context.Canceled` error from the state
store method. We need to bubble this error up so that other callers can detect
it. Handle this case separately when waiting after dequeue so that we can warn
on shutdown instead of throwing an ambiguous error message with just the text
"canceled."
While there may be more precise ways to block scheduling until the
server catches up, this approach adds little risk and covers additional
cases where a server may be temporarily behind due to a spike in load or
a saturated network.
For testing, we make the `raftSyncLimit` into a parameter on the worker's `run` method
so that we can run backoff tests without waiting 30+ seconds. We haven't followed thru
and made all the worker globals into worker parameters, because there isn't much
use outside of testing, but we can consider that in the future.
Co-authored-by: Tim Gross <tgross@hashicorp.com>
This changeset fixes a long-standing point of confusion in metrics emitted by
the eval broker. The eval broker has a queue of "blocked" evals that are waiting
for an in-flight ("unacked") eval of the same job to be completed. But this
"blocked" state is not the same as the `blocked` status that we write to raft
and expose in the Nomad API to end users. There's a second metric
`nomad.blocked_eval.total_blocked` that refers to evaluations in that
state. This has caused ongoing confusion in major customer incidents and even in
our own documentation! (Fixed in this PR.)
There's little functional change in this PR aside from the name of the metric
emitted, but there's a bit refactoring to clean up the names in `eval_broker.go`
so that there aren't name collisions and multiple names for the same
state. Changes included are:
* Everything that was previously called "pending" referred to entities that were
associated witht he "ready" metric. These are all now called "ready" to match
the metric.
* Everything named "blocked" in `eval_broker.go` is now named "pending", except
for a couple of comments that actually refer to blocked RPCs.
* Added a note to the upgrade guide docs for 1.5.0.
* Fixed the scheduling performance metrics docs because the description for
`nomad.broker.total_blocked` was actually the description for
`nomad.blocked_eval.total_blocked`.
* Add config elements
* Wire in snapshot configuration to raft
* Add hot reload of raft config
* Add documentation for new raft settings
* Add changelog
* consul: correctly understand missing consul checks as unhealthy
This PR fixes a bug where Nomad assumed any registered Checks would exist
in the service registration coming back from Consul. In some cases, the
Consul may be slow in processing the check registration, and the response
object would not contain checks. Nomad would then scan the empty response
looking for Checks with failing health status, finding none, and then
marking a task/alloc as healthy.
In reality, we must always use Nomad's view of what checks should exist as
the source of truth, and compare that with the response Consul gives us,
making sure they match, before scanning the Consul response for failing
check statuses.
Fixes#15536
* consul: minor CR refactor using maps not sets
* consul: observe transition from healthy to unhealthy checks
* consul: spell healthy correctly
This adds new OIDC endpoints on the RPC endpoint. These two RPCs
handle generating the OIDC provider URL and then completing the
login by exchanging the provider token with an internal Nomad
token.
The RPC endpoints both do double forwarding. The initial forward
is to ensure we are talking to the regional leader; the second
then takes into account whether the auth method generates local or
global tokens. If it creates global tokens, we must then forward
onto the federated regional leader.
This PR adds support for configuring `proxy.upstreams[].config` for
Consul Connect upstreams. This is an opaque config value to Nomad -
the data is passed directly to Consul and is unknown to Nomad.
* connect: fix non-"tcp" ingress gateway validation
changes apply to http, http2, and grpc:
* if "hosts" is excluded, consul will use its default domain
e.g. <service-name>.ingress.dc1.consul
* can't set hosts with "*" service name
* test http2 and grpc too
* [no ci] first pass at plumbing grpc_ca_file
* consul: add support for grpc_ca_file for tls grpc connections in consul 1.14+
This PR adds client config to Nomad for specifying consul.grpc_ca_file
These changes combined with https://github.com/hashicorp/consul/pull/15913 should
finally enable Nomad users to upgrade to Consul 1.14+ and use tls grpc connections.
* consul: add cl entgry for grpc_ca_file
* docs: mention grpc_tls changes due to Consul 1.14
* vault: configure user agent on Nomad vault clients
This PR attempts to set the User-Agent header on each Vault API client
created by Nomad. Still need to figure a way to set User-Agent on the
Vault client created internally by consul-template.
* vault: fixup find-and-replace gone awry
This changeset covers a sidebar discussion that @schmichael and I had around the
design for pre-forwarding auth. This includes some changes extracted out of
#15513 to make it easier to review both and leave a clean history.
* Remove fast path for NodeID. Previously-connected clients will have a NodeID
set on the context, and because this is a large portion of the RPCs sent we
fast-pathed it at the top of the `Authenticate` method. But the context is
shared for all yamux streams over the same yamux session (and TCP
connection). This lets an authenticated HTTP request to a client use the
NodeID for authentication, which is a privilege escalation. Remove the fast
path and annotate it so that we don't break it again.
* Add context to decisions around AuthenticatedIdentity. The `Authenticate`
method taken on its own looks like it wants to return an `acl.ACL` that folds
over all the various identity types (creating an ephemeral ACL on the fly if
neccessary). But keeping these fields idependent allows RPC handlers to
differentiate between internal and external origins so we most likely want to
avoid this. Leave some docstrings as a warning as to why this is built the way
it is.
* Mutate the request rather than returning. When reviewing #15513 we decided
that forcing the request handler to call `SetIdentity` was repetitive and
error prone. Instead, the `Authenticate` method mutates the request by setting
its `AuthenticatedIdentity`.
This PR removes usages of `consul/sdk/testutil/retry`, as part of the
ongoing effort to remove use of any non-API module from Consul.
There is one remanining usage in the helper/freeport package, but that
will get removed as part of #15589
UpsertBindingRules RPC changed in eacecb8,
validation happens after the ID check now, because we don't want validation to
fail for update payloads which may contain incomplete objects.
API and RPC endpoints for ACLAuthMethods and ACLBindingRules should allow users
to send incomplete objects in order to, e.g., update single fields. This PR
provides "merging" functionality for these endpoints.
ACL binding rule create and deletes are always forwarded to the
authoritative region. In order to make these available in
federated regions, the leaders in these regions need to replicate
from the authoritative.
This change add the RPC ACL binding rule handlers. These handlers
are responsible for the creation, updating, reading, and deletion
of binding rules.
The write handlers are feature gated so that they can only be used
when all federated servers are running the required version.
The HTTP API handlers and API SDK have also been added where
required. This allows the endpoints to be called from the API by users
and clients.
Phil Renaud