When claiming a CSI volume, we need to ensure the CSI node plugin is running
before we send any CSI RPCs. This extends even to the controller publish RPC
because it requires the storage provider's "external node ID" for the
client. This primarily impacts client restarts but also is a problem if the node
plugin exits (and fingerprints) while the allocation that needs a CSI volume
claim is being placed.
Unfortunately there's no mapping of volume to plugin ID available in the
jobspec, so we don't have enough information to wait on plugins until we either
get the volume from the server or retrieve the plugin ID from data we've
persisted on the client.
If we always require getting the volume from the server before making the claim,
a client restart for disconnected clients will cause all the allocations that
need CSI volumes to fail. Even while connected, checking in with the server to
verify the volume's plugin before trying to make a claim RPC is inherently racy,
so we'll leave that case as-is and it will fail the claim if the node plugin
needed to support a newly-placed allocation is flapping such that the node
fingerprint is changing.
This changeset persists a minimum subset of data about the volume and its plugin
in the client state DB, and retrieves that data during the CSI hook's prerun to
avoid re-claiming and remounting the volume unnecessarily.
This changeset also updates the RPC handler to use the external node ID from the
claim whenever it is available.
Fixes: #13028
* cni: ensure to setup CNI addresses in deterministic order
Currently as commented in the code the go-cni library returns an unordered map
of interfaces. In cases where there are multiple CNI interfaces being created this
creates a problem with service registration and healthchecking because the first
address in the map is being used.
The use case we have where this is an issue is that we run CNI with the macvlan
plugin to isolate workloads, but they still need to be able to access the host on
a static address to be able to perform local resolving and hit host services like
the Consul agent API. To make this work there are 2 options, you either add a
macvlan interface on the host with an assigned address for each VLAN you have or
you create an additional veth bridged interface in the container namespace.
We chose the latter option through a custom CNI plugin but the ordering issue
leaves us with incorrect service registration.
* Updates after feedback
* First check for the CNIResult interfaces length, if it's zero we don't need to proceed
at all.
* Use sorted interfaces list for the address fallback scenario as well.
* Remove "found" log message logic, when an address isn't found an error is returned stating
the allocation could not be configured as an address was missing from the CNIResult. If we
still need a Warn message then we can add it to the condition that returns the error if no
address could be found instead of using the "found" bool logic.
In #17354 we made client updates prioritized to reduce client-to-server
traffic. When the client has no previously-acknowledged update we assume that
the update is of typical priority; although we don't know that for sure in
practice an allocation will never become healthy quickly enough that the first
update we send is the update saying the alloc is healthy.
But that doesn't account for allocations that quickly fail in an unrecoverable
way because of allocrunner hook failures, and it'd be nice to be able to send
those failure states to the server more quickly. This changeset does so and adds
some extra comments on reasoning behind priority.
This complements the `env` parameter, so that the operator can author
tasks that don't share their Vault token with the workload when using
`image` filesystem isolation. As a result, more powerful tokens can be used
in a job definition, allowing it to use template stanzas to issue all kinds of
secrets (database secrets, Vault tokens with very specific policies, etc.),
without sharing that issuing power with the task itself.
This is accomplished by creating a directory called `private` within
the task's working directory, which shares many properties of
the `secrets` directory (tmpfs where possible, not accessible by
`nomad alloc fs` or Nomad's web UI), but isn't mounted into/bound to the
container.
If the `disable_file` parameter is set to `false` (its default), the Vault token
is also written to the NOMAD_SECRETS_DIR, so the default behavior is
backwards compatible. Even if the operator never changes the default,
they will still benefit from the improved behavior of Nomad never reading
the token back in from that - potentially altered - location.
Provide a no-op implementation of the drivers.DriverNetoworkManager
interface to be used by systems that don't support network isolation and
prevent panics where a network manager is expected.
This PR fixes a bug where the docker network pause container would not be
stopped and removed in the case where a node is restarted, the alloc is
moved to another node, the node comes back up. See the issue below for
full repro conditions.
Basically in the DestroyNetwork PostRun hook we would depend on the
NetworkIsolationSpec field not being nil - which is only the case
if the Client stays alive all the way from network creation to network
teardown. If the node is rebooted we lose that state and previously
would not be able to find the pause container to remove. Now, we manually
find the pause container by scanning them and looking for the associated
allocID.
Fixes#17299
The allocrunner sends several updates to the server during the early lifecycle
of an allocation and its tasks. Clients batch-up allocation updates every 200ms,
but experiments like the C2M challenge has shown that even with this batching,
servers can be overwhelmed with client updates during high volume
deployments. Benchmarking done in #9451 has shown that client updates can easily
represent ~70% of all Nomad Raft traffic.
Each allocation sends many updates during its lifetime, but only those that
change the `ClientStatus` field are critical for progressing a deployment or
kicking off a reschedule to recover from failures.
Add a priority to the client allocation sync and update the `syncTicker`
receiver so that we only send an update if there's a high priority update
waiting, or on every 5th tick. This means when there are no high priority
updates, the client will send updates at most every 1s instead of
200ms. Benchmarks have shown this can reduce overall Raft traffic by 10%, as
well as reduce client-to-server RPC traffic.
This changeset also switches from a channel-based collection of updates to a
shared buffer, so as to split batching from sending and prevent backpressure
onto the allocrunner when the RPC is slow. This doesn't have a major performance
benefit in the benchmarks but makes the implementation of the prioritized update
simpler.
Fixes: #9451
* client: ignore restart issued to terminal allocations
This PR fixes a bug where issuing a restart to a terminal allocation
would cause the allocation to run its hooks anyway. This was particularly
apparent with group_service_hook who would then register services but
then never deregister them - as the allocation would be effectively in
a "zombie" state where it is prepped to run tasks but never will.
* e2e: add e2e test for alloc restart zombies
* cl: tweak text
Co-authored-by: Tim Gross <tgross@hashicorp.com>
---------
Co-authored-by: Tim Gross <tgross@hashicorp.com>
The `DisableLogCollection` capability was introduced as an experimental
interface for the Docker driver in 0.10.4. The interface has been stable and
allowing third-party task drivers the same capability would be useful for those
drivers that don't need the additional overhead of logmon.
This PR only makes the capability public. It doesn't yet add it to the
configuration options for the other internal drivers.
Fixes: #14636#15686
Tools like `nomad-nodesim` are unable to implement a minimal implementation of
an allocrunner so that we can test the client communication without having to
lug around the entire allocrunner/taskrunner code base. The allocrunner was
implemented with an interface specifically for this purpose, but there were
circular imports that made it challenging to use in practice.
Move the AllocRunner interface into an inner package and provide a factory
function type. Provide a minimal test that exercises the new function so that
consumers have some idea of what the minimum implementation required is.
When client nodes are restarted, all allocations that have been scheduled on the
node have their modify index updated, including terminal allocations. There are
several contributing factors:
* The `allocSync` method that updates the servers isn't gated on first contact
with the servers. This means that if a server updates the desired state while
the client is down, the `allocSync` races with the `Node.ClientGetAlloc`
RPC. This will typically result in the client updating the server with "running"
and then immediately thereafter "complete".
* The `allocSync` method unconditionally sends the `Node.UpdateAlloc` RPC even
if it's possible to assert that the server has definitely seen the client
state. The allocrunner may queue-up updates even if we gate sending them. So
then we end up with a race between the allocrunner updating its internal state
to overwrite the previous update and `allocSync` sending the bogus or duplicate
update.
This changeset adds tracking of server-acknowledged state to the
allocrunner. This state gets checked in the `allocSync` before adding the update
to the batch, and updated when `Node.UpdateAlloc` returns successfully. To
implement this we need to be able to equality-check the updates against the last
acknowledged state. We also need to add the last acknowledged state to the
client state DB, otherwise we'd drop unacknowledged updates across restarts.
The client restart test has been expanded to cover a variety of allocation
states, including allocs stopped before shutdown, allocs stopped by the server
while the client is down, and allocs that have been completely GC'd on the
server while the client is down. I've also bench tested scenarios where the task
workload is killed while the client is down, resulting in a failed restore.
Fixes#16381
This PR fixes a bug where nodes configured with populated
/etc/ssh/ssh_known_hosts files would be unable to read them during
artifact downloading.
Fixes#17086
to avoid leaking task resources (e.g. containers,
iptables) if allocRunner prerun fails during
restore on client restart.
now if prerun fails, TaskRunner.MarkFailedKill()
will only emit an event, mark the task as failed,
and cancel the tr's killCtx, so then ar.runTasks()
-> tr.Run() can take care of the actual cleanup.
removed from (formerly) tr.MarkFailedDead(),
now handled by tr.Run():
* set task state as dead
* save task runner local state
* task stop hooks
also done in tr.Run() now that it's not skipped:
* handleKill() to kill tasks while respecting
their shutdown delay, and retrying as needed
* also includes task preKill hooks
* clearDriverHandle() to destroy the task
and associated resources
* task exited hooks
When the server restarts for the upgrade, it loads the `structs.Job` from the
Raft snapshot/logs. The jobspec has long since been parsed, so none of the
guards around the default value are in play. The empty field value for `Enabled`
is the zero value, which is false.
This doesn't impact any running allocation because we don't replace running
allocations when either the client or server restart. But as soon as any
allocation gets rescheduled (ex. you drain all your clients during upgrades),
it'll be using the `structs.Job` that the server has, which has `Enabled =
false`, and logs will not be collected.
This changeset fixes the bug by adding a new field `Disabled` which defaults to
false (so that the zero value works), and deprecates the old field.
Fixes#17076
This PR does some cleanup of an old code path for versions of Consul that
did not support reporting the supported versions of Envoy in its API. Those
versions are no longer supported for years at this point, and the fallback
version of envoy hasn't been supported by any version of Consul for almost
as long. Remove this code path that is no longer useful.
This PR modifies references to the envoyproxy/envoy docker image to
explicitly include the docker.io prefix. This does not affect existing
users, but makes things easier for Podman users, who otherwise need to
specify the full name because Podman does not default to docker.io
This PR updates the envoy_bootstrap_hook to no longer disable itself if
the task driver in use is not docker. In other words, make it work for
podman and other image based task drivers. The hook now only checks that
1. the task is a connect sidecar
2. the task.config block contains an "image" field
* services: un-mark group services as deregistered if restart hook runs
This PR may fix a bug where group services will never be deregistered if the
group undergoes a task restart.
* e2e: add test case for restart and deregister group service
* cl: add cl
* e2e: add wait for service list call
Some Nomad users ship application logs out-of-band via syslog. For these users
having `logmon` (and `docker_logger`) running is unnecessary overhead. Allow
disabling the logmon and pointing the task's stdout/stderr to /dev/null.
This changeset is the first of several incremental improvements to log
collection short of full-on logging plugins. The next step will likely be to
extend the internal-only task driver configuration so that cluster
administrators can turn off log collection for the entire driver.
---
Fixes: #11175
Co-authored-by: Thomas Weber <towe75@googlemail.com>
The first start of a Consul Connect proxy sidecar triggers a run
of the envoy_version hook which modifies the task config image
entry. The modification takes into account a number of factors to
correctly populate this. Importantly, once the hook has run, it
marks itself as done so the taskrunner will not execute it again.
When the client receives a non-destructive update for the
allocation which the proxy sidecar is a member of, it will update
and overwrite the task definition within the taskerunner. In doing
so it overwrite the modification performed by the hook. If the
allocation is restarted, the envoy_version hook will be skipped as
it previously marked itself as done, and therefore the sidecar
config image is incorrect and causes a driver error.
The fix removes the hook in marking itself as done to the view of
the taskrunner.
new WaitForPlugin() called during csiHook.Prerun,
so that on startup, clients can recover running
tasks that use CSI volumes, instead of them being
terminated and rescheduled because they need a
node plugin that is "not found" *yet*, only because
the plugin task has not yet been recovered.
The allocrunner has a facility for passing data written by allocrunner hooks to
taskrunner hooks. Currently the only consumers of this facility are the
allocrunner CSI hook (which writes data) and the taskrunner volume hook (which
reads that same data).
The allocrunner hook for CSI volumes doesn't set the alloc hook resources
atomically. Instead, it gets the current resources and then writes a new version
back. Because the CSI hook is currently the only writer and all readers happen
long afterwards, this should be safe but #16623 shows there's some sequence of
events during restore where this breaks down.
Refactor hook resources so that hook data is accessed via setters and getters
that hold the mutex.
* services: always set deregister flag after deregistration of group
This PR fixes a bug where the group service hook's deregister flag was
not set in some cases, causing the hook to attempt deregistrations twice
during job updates (alloc replacement).
In the tests ... we used to assert on the wrong behvior (remove twice) which
has now been corrected to assert we remove only once.
This bug was "silent" in the Consul provider world because the error logs for
double deregistration only show up in Consul logs; with the Nomad provider the
error logs are in the Nomad agent logs.
* services: cleanup group service hook tests
* landlock: git needs more files for private repositories
This PR fixes artifact downloading so that git may work when cloning from
private repositories. It needs
- file read on /etc/passwd
- dir read on /root/.ssh
- file write on /root/.ssh/known_hosts
Add these rules to the landlock rules for the artifact sandbox.
* cr: use nonexistent instead of devnull
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
* cr: use go-homdir for looking up home directory
* pr: pull go-homedir into explicit require
* cr: fixup homedir tests in homeless root cases
* cl: fix root test for real
---------
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
This PR fixes the non-root macOS use case where artifact downloads
stopped working. It seems setting a Credential on a SysProcAttr
used by the exec package will always cause fork/exec to fail -
even if the credential contains our own UID/GID or nil UID/GID.
Technically we do not need to set this as the child process will
inherit the parent UID/GID anyway... and not setting it makes
things work again ... /shrug
* client: disable running artifact downloader as nobody
This PR reverts a change from Nomad 1.5 where artifact downloads were
executed as the nobody user on Linux systems. This was done as an attempt
to improve the security model of artifact downloading where third party
tools such as git or mercurial would be run as the root user with all
the security implications thereof.
However, doing so conflicts with Nomad's own advice for securing the
Client data directory - which when setup with the recommended directory
permissions structure prevents artifact downloads from working as intended.
Artifact downloads are at least still now executed as a child process of
the Nomad agent, and on modern Linux systems make use of the kernel Landlock
feature for limiting filesystem access of the child process.
* docs: update upgrade guide for 1.5.1 sandboxing
* docs: add cl
* docs: add title to upgrade guide fix
* Update ioutil deprecated library references to os and io respectively
* Deal with the errors produced.
Add error handling to filEntry info
Add error handling to info
The `TaskUpdateRequest` struct we send to task runner update hooks was not
populating the Nomad token that we get from the task runner (which we do for the
Vault token). This results in task runner hooks like the template hook
overwriting the Nomad token with the zero value for the token. This causes
in-place updates of a task to break templates (but not other uses that rely on
identity but don't currently bother to update it, like the identity hook).
This PR fixes a bug where the task group information was not being set
on the serviceHook.AllocInfo struct, which is needed later on for calculating
the CheckID of a nomad service check. The CheckID is calculated independently
from multiple callsites, and the information being passed in must be consistent,
including the group name.
The workload.AllocInfo.Group was not set at this callsite, due to the bug fixed in this PR.
https://github.com/hashicorp/nomad/blob/main/client/serviceregistration/nsd/nsd.go#L114
* artifact: protect against unbounded artifact decompression
Starting with 1.5.0, set defaut values for artifact decompression limits.
artifact.decompression_size_limit (default "100GB") - the maximum amount of
data that will be decompressed before triggering an error and cancelling
the operation
artifact.decompression_file_count_limit (default 4096) - the maximum number
of files that will be decompressed before triggering an error and
cancelling the operation.
* artifact: assert limits cannot be nil in validation
This change introduces the Task API: a portable way for tasks to access Nomad's HTTP API. This particular implementation uses a Unix Domain Socket and, unlike the agent's HTTP API, always requires authentication even if ACLs are disabled.
This PR contains the core feature and tests but followup work is required for the following TODO items:
- Docs - might do in a followup since dynamic node metadata / task api / workload id all need to interlink
- Unit tests for auth middleware
- Caching for auth middleware
- Rate limiting on negative lookups for auth middleware
---------
Co-authored-by: Seth Hoenig <shoenig@duck.com>
* largely a doc-ification of this commit message:
d47678074bf8ae9ff2da3c91d0729bf03aee8446
this doesn't spell out all the possible failure modes,
but should be a good starting point for folks.
* connect: add doc link to envoy bootstrap error
* add Unwrap() to RecoverableError
mainly for easier testing
Add `identity` jobspec block to expose workload identity tokens to tasks.
---------
Co-authored-by: Anders <mail@anars.dk>
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
