When registering a job with a service and 'consul.allow_unauthenticated=false',
we scan the given Consul token for an acceptable policy or role with an
acceptable policy, but did not scan for an acceptable service identity (which
is backed by an acceptable virtual policy). This PR updates our consul token
validation to also accept a matching service identity when registering a service
into Consul.
Fixes#15902
Also tightens up authentication for these endpoints by enforcing the server
certificate name is valid. We protect these endpoints currently by mTLS and
can't use an auth token because these endpoints are (uniquely) called by the
leader and followers for a given node won't have the leader's ephemeral ACL
token. Add a certificate name check that requests come from a server and not a
client, because no client should ever send these RPCs directly.
Disallowing per_alloc for host volumes in some cases makes life of a nomad user much harder.
When we rely on the NOMAD_ALLOC_INDEX for any configuration that needs to be re-used across
restarts we need to make sure allocation placement is consistent. With CSI volumes we can
use the `per_alloc` feature but for some reason this is explicitly disabled for host volumes.
Ensure host volumes understand the concept of per_alloc
This changeset configures the RPC rate metrics that were added in #15515 to all
the RPCs that support authenticated HTTP API requests. These endpoints already
configured with pre-forwarding authentication in #15870, and a handful of others
were done already as part of the proof-of-concept work. So this changeset is
entirely copy-and-pasting one method call into a whole mess of handlers.
Upcoming PRs will wire up pre-forwarding auth and rate metrics for the remaining
set of RPCs that have no API consumers or aren't authenticated, in smaller
chunks that can be more thoughtfully reviewed.
When a Nomad client that is running an allocation with
`max_client_disconnect` set misses a heartbeat the Nomad server will
update its status to `disconnected`.
Upon reconnecting, the client will make three main RPC calls:
- `Node.UpdateStatus` is used to set the client status to `ready`.
- `Node.UpdateAlloc` is used to update the client-side information about
allocations, such as their `ClientStatus`, task states etc.
- `Node.Register` is used to upsert the entire node information,
including its status.
These calls are made concurrently and are also running in parallel with
the scheduler. Depending on the order they run the scheduler may end up
with incomplete data when reconciling allocations.
For example, a client disconnects and its replacement allocation cannot
be placed anywhere else, so there's a pending eval waiting for
resources.
When this client comes back the order of events may be:
1. Client calls `Node.UpdateStatus` and is now `ready`.
2. Scheduler reconciles allocations and places the replacement alloc to
the client. The client is now assigned two allocations: the original
alloc that is still `unknown` and the replacement that is `pending`.
3. Client calls `Node.UpdateAlloc` and updates the original alloc to
`running`.
4. Scheduler notices too many allocs and stops the replacement.
This creates unnecessary placements or, in a different order of events,
may leave the job without any allocations running until the whole state
is updated and reconciled.
To avoid problems like this clients must update _all_ of its relevant
information before they can be considered `ready` and available for
scheduling.
To achieve this goal the RPC endpoints mentioned above have been
modified to enforce strict steps for nodes reconnecting:
- `Node.Register` does not set the client status anymore.
- `Node.UpdateStatus` sets the reconnecting client to the `initializing`
status until it successfully calls `Node.UpdateAlloc`.
These changes are done server-side to avoid the need of additional
coordination between clients and servers. Clients are kept oblivious of
these changes and will keep making these calls as they normally would.
The verification of whether allocations have been updates is done by
storing and comparing the Raft index of the last time the client missed
a heartbeat and the last time it updated its allocations.
This changeset allows Workload Identities to authenticate to all the RPCs that
support HTTP API endpoints, for use with PR #15864.
* Extends the work done for pre-forwarding authentication to all RPCs that
support a HTTP API endpoint.
* Consolidates the auth helpers used by the CSI, Service Registration, and Node
endpoints that are currently used to support both tokens and client secrets.
Intentionally excluded from this changeset:
* The Variables endpoint still has custom handling because of the implicit
policies. Ideally we'll figure out an efficient way to resolve those into real
policies and then we can get rid of that custom handling.
* The RPCs that don't currently support auth tokens (i.e. those that don't
support HTTP endpoints) have not been updated with the new pre-forwarding auth
We'll be doing this under a separate PR to support RPC rate metrics.
If a consumer of the new `Authenticate` method gets passed a bogus token that's
a correctly-shaped UUID, it will correctly get an identity without a ACL
token. But most consumers will then panic when they consume this nil `ACLToken`
for authorization.
Because no API client should ever send a bogus auth token, update the
`Authenticate` method to create the identity with remote IP (for metrics
tracking) but also return an `ErrPermissionDenied`.
Implement a metric for RPC requests with labels on the identity, so that
administrators can monitor the source of requests within the cluster. This
changeset demonstrates the change with the new `ACL.WhoAmI` RPC, and we'll wire
up the remaining RPCs once we've threaded the new pre-forwarding authentication
through the all.
Note that metrics are measured after we forward but before we return any
authentication error. This ensures that we only emit metrics on the server that
actually serves the request. We'll perform rate limiting at the same place.
Includes telemetry configuration to omit identity labels.
In #15417 we added a new `Authenticate` method to the server that returns an
`AuthenticatedIdentity` struct. This changeset implements this method for a
small number of RPC endpoints that together represent all the various ways in
which RPCs are sent, so that we can validate that we're happy with this
approach.
Upon dequeuing an evaluation workers snapshot their state store at the
eval's wait index or later. This ensures we process an eval at a point
in time after it was created or updated. Processing an eval on an old
snapshot could cause any number of problems such as:
1. Since job registration atomically updates an eval and job in a single
raft entry, scheduling against indexes before that may not have the
eval's job or may have an older version.
2. The older the scheduler's snapshot, the higher the likelihood
something has changed in the cluster state which will cause the plan
applier to reject the scheduler's plan. This could waste work or
even cause eval's to be failed needlessly.
However, the workers run in parallel with a new server pulling the
cluster state from a peer. During this time, which may be many minutes
long, the state store is likely far behind the minimum index required
to process evaluations.
This PR addresses this by adding an additional long backoff period after
an eval is nacked. If the scheduler's indexes catches up within the
additional backoff, it will unblock early to dequeue the next eval.
When the server shuts down we'll get a `context.Canceled` error from the state
store method. We need to bubble this error up so that other callers can detect
it. Handle this case separately when waiting after dequeue so that we can warn
on shutdown instead of throwing an ambiguous error message with just the text
"canceled."
While there may be more precise ways to block scheduling until the
server catches up, this approach adds little risk and covers additional
cases where a server may be temporarily behind due to a spike in load or
a saturated network.
For testing, we make the `raftSyncLimit` into a parameter on the worker's `run` method
so that we can run backoff tests without waiting 30+ seconds. We haven't followed thru
and made all the worker globals into worker parameters, because there isn't much
use outside of testing, but we can consider that in the future.
Co-authored-by: Tim Gross <tgross@hashicorp.com>
This changeset fixes a long-standing point of confusion in metrics emitted by
the eval broker. The eval broker has a queue of "blocked" evals that are waiting
for an in-flight ("unacked") eval of the same job to be completed. But this
"blocked" state is not the same as the `blocked` status that we write to raft
and expose in the Nomad API to end users. There's a second metric
`nomad.blocked_eval.total_blocked` that refers to evaluations in that
state. This has caused ongoing confusion in major customer incidents and even in
our own documentation! (Fixed in this PR.)
There's little functional change in this PR aside from the name of the metric
emitted, but there's a bit refactoring to clean up the names in `eval_broker.go`
so that there aren't name collisions and multiple names for the same
state. Changes included are:
* Everything that was previously called "pending" referred to entities that were
associated witht he "ready" metric. These are all now called "ready" to match
the metric.
* Everything named "blocked" in `eval_broker.go` is now named "pending", except
for a couple of comments that actually refer to blocked RPCs.
* Added a note to the upgrade guide docs for 1.5.0.
* Fixed the scheduling performance metrics docs because the description for
`nomad.broker.total_blocked` was actually the description for
`nomad.blocked_eval.total_blocked`.
* Add config elements
* Wire in snapshot configuration to raft
* Add hot reload of raft config
* Add documentation for new raft settings
* Add changelog
* consul: correctly understand missing consul checks as unhealthy
This PR fixes a bug where Nomad assumed any registered Checks would exist
in the service registration coming back from Consul. In some cases, the
Consul may be slow in processing the check registration, and the response
object would not contain checks. Nomad would then scan the empty response
looking for Checks with failing health status, finding none, and then
marking a task/alloc as healthy.
In reality, we must always use Nomad's view of what checks should exist as
the source of truth, and compare that with the response Consul gives us,
making sure they match, before scanning the Consul response for failing
check statuses.
Fixes#15536
* consul: minor CR refactor using maps not sets
* consul: observe transition from healthy to unhealthy checks
* consul: spell healthy correctly
This adds new OIDC endpoints on the RPC endpoint. These two RPCs
handle generating the OIDC provider URL and then completing the
login by exchanging the provider token with an internal Nomad
token.
The RPC endpoints both do double forwarding. The initial forward
is to ensure we are talking to the regional leader; the second
then takes into account whether the auth method generates local or
global tokens. If it creates global tokens, we must then forward
onto the federated regional leader.
This PR adds support for configuring `proxy.upstreams[].config` for
Consul Connect upstreams. This is an opaque config value to Nomad -
the data is passed directly to Consul and is unknown to Nomad.
* connect: fix non-"tcp" ingress gateway validation
changes apply to http, http2, and grpc:
* if "hosts" is excluded, consul will use its default domain
e.g. <service-name>.ingress.dc1.consul
* can't set hosts with "*" service name
* test http2 and grpc too
* [no ci] first pass at plumbing grpc_ca_file
* consul: add support for grpc_ca_file for tls grpc connections in consul 1.14+
This PR adds client config to Nomad for specifying consul.grpc_ca_file
These changes combined with https://github.com/hashicorp/consul/pull/15913 should
finally enable Nomad users to upgrade to Consul 1.14+ and use tls grpc connections.
* consul: add cl entgry for grpc_ca_file
* docs: mention grpc_tls changes due to Consul 1.14
* vault: configure user agent on Nomad vault clients
This PR attempts to set the User-Agent header on each Vault API client
created by Nomad. Still need to figure a way to set User-Agent on the
Vault client created internally by consul-template.
* vault: fixup find-and-replace gone awry
This changeset covers a sidebar discussion that @schmichael and I had around the
design for pre-forwarding auth. This includes some changes extracted out of
#15513 to make it easier to review both and leave a clean history.
* Remove fast path for NodeID. Previously-connected clients will have a NodeID
set on the context, and because this is a large portion of the RPCs sent we
fast-pathed it at the top of the `Authenticate` method. But the context is
shared for all yamux streams over the same yamux session (and TCP
connection). This lets an authenticated HTTP request to a client use the
NodeID for authentication, which is a privilege escalation. Remove the fast
path and annotate it so that we don't break it again.
* Add context to decisions around AuthenticatedIdentity. The `Authenticate`
method taken on its own looks like it wants to return an `acl.ACL` that folds
over all the various identity types (creating an ephemeral ACL on the fly if
neccessary). But keeping these fields idependent allows RPC handlers to
differentiate between internal and external origins so we most likely want to
avoid this. Leave some docstrings as a warning as to why this is built the way
it is.
* Mutate the request rather than returning. When reviewing #15513 we decided
that forcing the request handler to call `SetIdentity` was repetitive and
error prone. Instead, the `Authenticate` method mutates the request by setting
its `AuthenticatedIdentity`.
This PR removes usages of `consul/sdk/testutil/retry`, as part of the
ongoing effort to remove use of any non-API module from Consul.
There is one remanining usage in the helper/freeport package, but that
will get removed as part of #15589
UpsertBindingRules RPC changed in eacecb8,
validation happens after the ID check now, because we don't want validation to
fail for update payloads which may contain incomplete objects.
API and RPC endpoints for ACLAuthMethods and ACLBindingRules should allow users
to send incomplete objects in order to, e.g., update single fields. This PR
provides "merging" functionality for these endpoints.
ACL binding rule create and deletes are always forwarded to the
authoritative region. In order to make these available in
federated regions, the leaders in these regions need to replicate
from the authoritative.
This change add the RPC ACL binding rule handlers. These handlers
are responsible for the creation, updating, reading, and deletion
of binding rules.
The write handlers are feature gated so that they can only be used
when all federated servers are running the required version.
The HTTP API handlers and API SDK have also been added where
required. This allows the endpoints to be called from the API by users
and clients.
This change adds a new table that will store ACL binding rule
objects. The two indexes allow fast lookups by their ID, or by
which auth method they are linked to. Snapshot persist and
restore functionality ensures this table can be saved and
restored from snapshots.
In order to write and delete the object to state, new Raft messages
have been added.
All RPC request and response structs, along with object functions
such as diff and canonicalize have been included within this work
as it is nicely separated from the other areas of work.
* artifact: enable inheriting environment variables from client
This PR adds client configuration for specifying environment variables that
should be inherited by the artifact sandbox process from the Nomad Client agent.
Most users should not need to set these values but the configuration is provided
to ensure backwards compatability. Configuration of go-getter should ideally be
done through the artifact block in a jobspec task.
e.g.
```hcl
client {
artifact {
set_environment_variables = "TMPDIR,GIT_SSH_OPTS"
}
}
```
Closes#15498
* website: update set_environment_variables text to mention PATH
This PR adds the client config option for turning off filesystem isolation,
applicable on Linux systems where filesystem isolation is possible and
enabled by default.
```hcl
client{
artifact {
disable_filesystem_isolation = <bool:false>
}
}
```
Closes#15496
Streaming RPCs should only be registered once, not on every RPC call, because they set keys in StreamingRpcRegistry.registry map. This PR fixes it by checking whether endpoints are already registered before calling .register() method. Fixes#15474
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Upcoming work to instrument the rate of RPC requests by consumer (and eventually
rate limit) require that we authenticate a RPC request before forwarding. Add a
new top-level `Authenticate` method to the server and have it return an
`AuthenticatedIdentity` struct. RPC handlers will use the relevant fields of
this identity for performing authorization.
This changeset includes:
* The main implementation of `Authenticate`
* Provide a new RPC `ACL.WhoAmI` for debugging authentication. This endpoint
returns the same `AuthenticatedIdentity` that will be used by RPC handlers. At
some point we might want to give this an equivalent HTTP endpoint but I didn't
want to add that to our public API until some of the other Workload Identity
work is solidified, especially if we don't need it yet.
* A full coverage test of the `Authenticate` method. This sets up two server
nodes with mTLS and ACLs, some tokens, and some allocations with workload
identities.
* Wire up an example of using `Authenticate` in the `Namespace.Upsert` RPC and
see how authorization happens after forwarding.
* A new semgrep rule for `Authenticate`, which we'll need to update once we're
ready to wire up more RPC endpoints with authorization steps.
Jorge Marey