The allocrunner has a facility for passing data written by allocrunner hooks to
taskrunner hooks. Currently the only consumers of this facility are the
allocrunner CSI hook (which writes data) and the taskrunner volume hook (which
reads that same data).
The allocrunner hook for CSI volumes doesn't set the alloc hook resources
atomically. Instead, it gets the current resources and then writes a new version
back. Because the CSI hook is currently the only writer and all readers happen
long afterwards, this should be safe but #16623 shows there's some sequence of
events during restore where this breaks down.
Refactor hook resources so that hook data is accessed via setters and getters
that hold the mutex.
* client/fingerprint: correctly fingerprint E/P cores of Apple Silicon chips
This PR adds detection of asymetric core types (Power & Efficiency) (P/E)
when running on M1/M2 Apple Silicon CPUs. This functionality is provided
by shoenig/go-m1cpu which makes use of the Apple IOKit framework to read
undocumented registers containing CPU performance data. Currently working
on getting that functionality merged upstream into gopsutil, but gopsutil
would still not support detecting P vs E cores like this PR does.
Also refactors the CPUFingerprinter code to handle the mixed core
types, now setting power vs efficiency cpu attributes.
For now the scheduler is still unaware of mixed core types - on Apple
platforms tasks cannot reserve cores anyway so it doesn't matter, but
at least now the total CPU shares available will be correct.
Future work should include adding support for detecting P/E cores on
the latest and upcoming Intel chips, where computation of total cpu shares
is currently incorrect. For that, we should also include updating the
scheduler to be core-type aware, so that tasks of resources.cores on Linux
platforms can be assigned the correct number of CPU shares for the core
type(s) they have been assigned.
node attributes before
cpu.arch = arm64
cpu.modelname = Apple M2 Pro
cpu.numcores = 12
cpu.reservablecores = 0
cpu.totalcompute = 1000
node attributes after
cpu.arch = arm64
cpu.frequency.efficiency = 2424
cpu.frequency.power = 3504
cpu.modelname = Apple M2 Pro
cpu.numcores.efficiency = 4
cpu.numcores.power = 8
cpu.reservablecores = 0
cpu.totalcompute = 37728
* fingerprint/cpu: follow up cr items
* services: always set deregister flag after deregistration of group
This PR fixes a bug where the group service hook's deregister flag was
not set in some cases, causing the hook to attempt deregistrations twice
during job updates (alloc replacement).
In the tests ... we used to assert on the wrong behvior (remove twice) which
has now been corrected to assert we remove only once.
This bug was "silent" in the Consul provider world because the error logs for
double deregistration only show up in Consul logs; with the Nomad provider the
error logs are in the Nomad agent logs.
* services: cleanup group service hook tests
In #16217 we switched clients using Consul discovery to the `Status.Members`
endpoint for getting the list of servers so that we're using the correct
address. This endpoint has an authorization gate, so this fails if the anonymous
policy doesn't have `node:read`. We also can't check the `AuthToken` for the
request for the client secret, because the client hasn't yet registered so the
server doesn't have anything to compare against.
Instead of hitting the `Status.Peers` or `Status.Members` RPC endpoint, use the
Consul response directly. Update the `registerNode` method to handle the list of
servers we get back in the response; if we get a "no servers" or "no path to
region" response we'll kick off discovery again and retry immediately rather
than waiting 15s.
* landlock: git needs more files for private repositories
This PR fixes artifact downloading so that git may work when cloning from
private repositories. It needs
- file read on /etc/passwd
- dir read on /root/.ssh
- file write on /root/.ssh/known_hosts
Add these rules to the landlock rules for the artifact sandbox.
* cr: use nonexistent instead of devnull
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
* cr: use go-homdir for looking up home directory
* pr: pull go-homedir into explicit require
* cr: fixup homedir tests in homeless root cases
* cl: fix root test for real
---------
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
This PR fixes the non-root macOS use case where artifact downloads
stopped working. It seems setting a Credential on a SysProcAttr
used by the exec package will always cause fork/exec to fail -
even if the credential contains our own UID/GID or nil UID/GID.
Technically we do not need to set this as the child process will
inherit the parent UID/GID anyway... and not setting it makes
things work again ... /shrug
* cgv1: do not disable cpuset manager if reserved interface already exists
This PR fixes a bug where restarting a Nomad Client on a machine using cgroups
v1 (e.g. Ubuntu 20.04) would cause the cpuset cgroups manager to disable itself.
This is being caused by incorrectly interpreting a "file exists" error as
problematic when ensuring the reserved cpuset exists. If we get a "file exists"
error, that just means the Client was likely restarted.
Note that a machine reboot would fix the issue - the groups interfaces are
ephemoral.
* cl: add cl
* client: disable running artifact downloader as nobody
This PR reverts a change from Nomad 1.5 where artifact downloads were
executed as the nobody user on Linux systems. This was done as an attempt
to improve the security model of artifact downloading where third party
tools such as git or mercurial would be run as the root user with all
the security implications thereof.
However, doing so conflicts with Nomad's own advice for securing the
Client data directory - which when setup with the recommended directory
permissions structure prevents artifact downloads from working as intended.
Artifact downloads are at least still now executed as a child process of
the Nomad agent, and on modern Linux systems make use of the kernel Landlock
feature for limiting filesystem access of the child process.
* docs: update upgrade guide for 1.5.1 sandboxing
* docs: add cl
* docs: add title to upgrade guide fix
* Update ioutil deprecated library references to os and io respectively
* Deal with the errors produced.
Add error handling to filEntry info
Add error handling to info
Nomad servers can advertise independent IP addresses for `serf` and
`rpc`. Somewhat unexpectedly, the `serf` address is also used for both Serf and
server-to-server RPC communication (including Raft RPC). The address advertised
for `rpc` is only used for client-to-server RPC. This split was introduced
intentionally in Nomad 0.8.
When clients are using Consul discovery for connecting to servers, they get an
initial discovery set from Consul and use the correct `rpc` tag in Consul to get
a list of adddresses for servers. The client then makes a `Status.Peers` RPC to
get the list of those servers that are raft peers. But this endpoint is shared
between servers and clients, and provides the address used for Raft.
Most of the time this is harmless because servers will bind on 0.0.0.0 anyways.,
But in topologies where servers are on a private network and clients are on
separate subnets (or even public subnets), clients will make initial contact
with the server to get the list of peers but then populate their local server
set with unreachable addresses.
Cluster administrators can work around this problem by using `server_join` with
specific IP addresses (or DNS names), because the `Node.UpdateStatus` endpoint
returns the correct set of RPC addresses when updating the node. So once a
client has registered, it will get the correct set of RPC addresses.
This changeset updates the client logic to query `Status.Members` instead of
`Status.Peers`, and then extract the correctly advertised address and port from
the response body.
This change resolves policies for workload identities when calling Client RPCs. Previously only ACL tokens could be used for Client RPCs.
Since the same cache is used for both bearer tokens (ACL and Workload ID), the token cache size was doubled.
---------
Co-authored-by: James Rasell <jrasell@users.noreply.github.com>
The `TaskUpdateRequest` struct we send to task runner update hooks was not
populating the Nomad token that we get from the task runner (which we do for the
Vault token). This results in task runner hooks like the template hook
overwriting the Nomad token with the zero value for the token. This causes
in-place updates of a task to break templates (but not other uses that rely on
identity but don't currently bother to update it, like the identity hook).
This PR fixes a bug where the task group information was not being set
on the serviceHook.AllocInfo struct, which is needed later on for calculating
the CheckID of a nomad service check. The CheckID is calculated independently
from multiple callsites, and the information being passed in must be consistent,
including the group name.
The workload.AllocInfo.Group was not set at this callsite, due to the bug fixed in this PR.
https://github.com/hashicorp/nomad/blob/main/client/serviceregistration/nsd/nsd.go#L114
* artifact: protect against unbounded artifact decompression
Starting with 1.5.0, set defaut values for artifact decompression limits.
artifact.decompression_size_limit (default "100GB") - the maximum amount of
data that will be decompressed before triggering an error and cancelling
the operation
artifact.decompression_file_count_limit (default 4096) - the maximum number
of files that will be decompressed before triggering an error and
cancelling the operation.
* artifact: assert limits cannot be nil in validation
This PR fixes the CNI plugin fingerprinter to take into account the fact
that the cni_path config can be a multi-path (e.g. `/foo:/bar:/baz`).
Accumulate plugins from each of the possible path elements. If scanning
any of the named directory fails, the fingerprinter fails.
Fixes#16083
No CL/BP - has not shipped yet.
Fixes#14617
Dynamic Node Metadata allows Nomad users, and their jobs, to update Node metadata through an API. Currently Node metadata is only reloaded when a Client agent is restarted.
Includes new UI for editing metadata as well.
---------
Co-authored-by: Phil Renaud <phil.renaud@hashicorp.com>
* main: remove deprecated uses of rand.Seed
go1.20 deprecates rand.Seed, and seeds the rand package
automatically. Remove cases where we seed the random package,
and cleanup the one case where we intentionally create a
known random source.
* cl: update cl
* mod: update go mod
* docker: disable driver when running as non-root on cgroups v2 hosts
This PR modifies the docker driver to behave like exec when being run
as a non-root user on a host machine with cgroups v2 enabled. Because
of how cpu resources are managed by the Nomad client, the nomad agent
must be run as root to manage docker-created cgroups.
* cl: update cl
This change introduces the Task API: a portable way for tasks to access Nomad's HTTP API. This particular implementation uses a Unix Domain Socket and, unlike the agent's HTTP API, always requires authentication even if ACLs are disabled.
This PR contains the core feature and tests but followup work is required for the following TODO items:
- Docs - might do in a followup since dynamic node metadata / task api / workload id all need to interlink
- Unit tests for auth middleware
- Caching for auth middleware
- Rate limiting on negative lookups for auth middleware
---------
Co-authored-by: Seth Hoenig <shoenig@duck.com>
* largely a doc-ification of this commit message:
d47678074bf8ae9ff2da3c91d0729bf03aee8446
this doesn't spell out all the possible failure modes,
but should be a good starting point for folks.
* connect: add doc link to envoy bootstrap error
* add Unwrap() to RecoverableError
mainly for easier testing
Add `identity` jobspec block to expose workload identity tokens to tasks.
---------
Co-authored-by: Anders <mail@anars.dk>
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
* Add `bridge_network_hairpin_mode` client config setting
* Add node attribute: `nomad.bridge.hairpin_mode`
* Changed format string to use `%q` to escape user provided data
* Add test to validate template JSON for developer safety
Co-authored-by: Daniel Bennett <dbennett@hashicorp.com>
* client: run alloc pre-kill hooks on last pass despite no live tasks
This PR fixes a bug where alloc pre-kill hooks were not run in the
edge case where there are no live tasks remaining, but it is also
the final update to process for the (terminal) allocation. We need
to run cleanup hooks here, otherwise they will not run until the
allocation gets garbage collected (i.e. via Destroy()), possibly
at a distant time in the future.
Fixes#15477
* client: do not run ar cleanup hooks if client is shutting down
When the template hook Update() method is called it may recreate the
template manager if the Nomad or Vault token has been updated.
This caused the new template manager did not have a driver handler
because this was only being set on the Poststart hook, which is not
called for inplace updates.
This PR adjusts the artifact sandbox on Linux to enable reading from known
system-wide git or mercurial configuration, if they exist.
Folks doing something odd like specifying custom paths for global config will
need to use the standard locations, or disable artifact filesystem isolation.
* nsd: block on removal of services
This PR uses a WaitGroup to ensure workload removals are complete
before returning from ServiceRegistrationHandler.RemoveWorkload of
the nomad service provider. The de-registration of individual services
still occurs asynchrously, but we must block on the parent removal
call so that we do not race with further operations on the same set
of services - e.g. in the case of a task restart where we de-register
and then re-register the services in quick succession.
Fixes#15032
* nsd: add e2e test for initial failing check and restart
Disallowing per_alloc for host volumes in some cases makes life of a nomad user much harder.
When we rely on the NOMAD_ALLOC_INDEX for any configuration that needs to be re-used across
restarts we need to make sure allocation placement is consistent. With CSI volumes we can
use the `per_alloc` feature but for some reason this is explicitly disabled for host volumes.
Ensure host volumes understand the concept of per_alloc
In #15417 we added a new `Authenticate` method to the server that returns an
`AuthenticatedIdentity` struct. This changeset implements this method for a
small number of RPC endpoints that together represent all the various ways in
which RPCs are sent, so that we can validate that we're happy with this
approach.
* consul: correctly understand missing consul checks as unhealthy
This PR fixes a bug where Nomad assumed any registered Checks would exist
in the service registration coming back from Consul. In some cases, the
Consul may be slow in processing the check registration, and the response
object would not contain checks. Nomad would then scan the empty response
looking for Checks with failing health status, finding none, and then
marking a task/alloc as healthy.
In reality, we must always use Nomad's view of what checks should exist as
the source of truth, and compare that with the response Consul gives us,
making sure they match, before scanning the Consul response for failing
check statuses.
Fixes#15536
* consul: minor CR refactor using maps not sets
* consul: observe transition from healthy to unhealthy checks
* consul: spell healthy correctly
This PR adds support for configuring `proxy.upstreams[].config` for
Consul Connect upstreams. This is an opaque config value to Nomad -
the data is passed directly to Consul and is unknown to Nomad.
* [no ci] first pass at plumbing grpc_ca_file
* consul: add support for grpc_ca_file for tls grpc connections in consul 1.14+
This PR adds client config to Nomad for specifying consul.grpc_ca_file
These changes combined with https://github.com/hashicorp/consul/pull/15913 should
finally enable Nomad users to upgrade to Consul 1.14+ and use tls grpc connections.
* consul: add cl entgry for grpc_ca_file
* docs: mention grpc_tls changes due to Consul 1.14
