The default chroot copies all of /bin, /usr, etc. which can ammount
to gigabytes of stuff not actually needed for running our tests.
Use a smaller chroot in test cases so that CI infra with poor disk
IO has a chance.
* driver: fix integer conversion error
The shared executor incorrectly parsed the user's group into int32 and
then cast to uint32 without bounds checking. This is harmless because
an out-of-bounds gid will throw an error later, but it triggers
security and code quality scans. Parse directly to uint32 so that we
get correct error handling.
* helper: fix integer conversion error
The autopilot flags helper incorrectly parses a uint64 to a uint which
is machine specific size. Although we don't have 32-bit builds, this
sets off security and code quality scaans. Parse to the machine sized
uint.
* driver: restrict bounds of port map
The plugin server doesn't constrain the maximum integer for port
maps. This could result in a user-visible misconfiguration, but it
also triggers security and code quality scans. Restrict the bounds
before casting to int32 and return an error.
* cpuset: restrict upper bounds of cpuset values
Our cpuset configuration expects values in the range of uint16 to
match the expectations set by the kernel, but we don't constrain the
values before downcasting. An underflow could lead to allocations
failing on the client rather than being caught earlier. This also make
security and code quality scanners happy.
* http: fix integer downcast for per_page parameter
The parser for the `per_page` query parameter downcasts to int32
without bounds checking. This could result in underflow and
nonsensical paging, but there's no server-side consequences for
this. Fixing this will silence some security and code quality scanners
though.
Fixes#2522
Skip embedding client.alloc_dir when building chroot. If a user
configures a Nomad client agent so that the chroot_env will embed the
client.alloc_dir, Nomad will happily infinitely recurse while building
the chroot until something horrible happens. The best case scenario is
the filesystem's path length limit is hit. The worst case scenario is
disk space is exhausted.
A bad agent configuration will look something like this:
```hcl
data_dir = "/tmp/nomad-badagent"
client {
enabled = true
chroot_env {
# Note that the source matches the data_dir
"/tmp/nomad-badagent" = "/ohno"
# ...
}
}
```
Note that `/ohno/client` (the state_dir) will still be created but not
`/ohno/alloc` (the alloc_dir).
While I cannot think of a good reason why someone would want to embed
Nomad's client (and possibly server) directories in chroots, there
should be no cause for harm. chroots are only built when Nomad runs as
root, and Nomad disables running exec jobs as root by default. Therefore
even if client state is copied into chroots, it will be inaccessible to
tasks.
Skipping the `data_dir` and `{client,server}.state_dir` is possible, but
this PR attempts to implement the minimum viable solution to reduce risk
of unintended side effects or bugs.
When running tests as root in a vm without the fix, the following error
occurs:
```
=== RUN TestAllocDir_SkipAllocDir
alloc_dir_test.go:520:
Error Trace: alloc_dir_test.go:520
Error: Received unexpected error:
Couldn't create destination file /tmp/TestAllocDir_SkipAllocDir1457747331/001/nomad/test/testtask/nomad/test/testtask/.../nomad/test/testtask/secrets/.nomad-mount: open /tmp/TestAllocDir_SkipAllocDir1457747331/001/nomad/test/.../testtask/secrets/.nomad-mount: file name too long
Test: TestAllocDir_SkipAllocDir
--- FAIL: TestAllocDir_SkipAllocDir (22.76s)
```
Also removed unused Copy methods on AllocDir and TaskDir structs.
Thanks to @eveld for not letting me forget about this!
Add a new hostname string parameter to the network block which
allows operators to specify the hostname of the network namespace.
Changing this causes a destructive update to the allocation and it
is omitted if empty from API responses. This parameter also supports
interpolation.
In order to have a hostname passed as a configuration param when
creating an allocation network, the CreateNetwork func of the
DriverNetworkManager interface needs to be updated. In order to
minimize the disruption of future changes, rather than add another
string func arg, the function now accepts a request struct along with
the allocID param. The struct has the hostname as a field.
The in-tree implementations of DriverNetworkManager.CreateNetwork
have been modified to account for the function signature change.
In updating for the change, the enhancement of adding hostnames to
network namespaces has also been added to the Docker driver, whilst
the default Linux manager does not current implement it.
When `network.mode = "bridge"`, we create a pause container in Docker with no
networking so that we have a process to hold the network namespace we create
in Nomad. The default `/etc/hosts` file of that pause container is then used
for all the Docker tasks that share that network namespace. Some applications
rely on this file being populated.
This changeset generates a `/etc/hosts` file and bind-mounts it to the
container when Nomad owns the network, so that the container's hostname has an
IP in the file as expected. The hosts file will include the entries added by
the Docker driver's `extra_hosts` field.
In this changeset, only the Docker task driver will take advantage of this
option, as the `exec`/`java` drivers currently copy the host's `/etc/hosts`
file and this can't be changed without breaking backwards compatibility. But
the fields are available in the task driver protobuf for community task
drivers to use if they'd like.
Add a new driver capability: RemoteTasks.
When a task is run by a driver with RemoteTasks set, its TaskHandle will
be propagated to the server in its allocation's TaskState. If the task
is replaced due to a down node or draining, its TaskHandle will be
propagated to its replacement allocation.
This allows tasks to be scheduled in remote systems whose lifecycles are
disconnected from the Nomad node's lifecycle.
See https://github.com/hashicorp/nomad-driver-ecs for an example ECS
remote task driver.
Use targetted ignore comments for the cases where we are bound by
backward compatibility.
I've left some file based linters, especially when the file is riddled
with linter voilations (e.g. enum names), or if it's a property of the
file (e.g. package and file names).
I encountered an odd behavior related to RPC_REQUEST_RESPONSE_UNIQUE and
RPC_REQUEST_STANDARD_NAME. Apparently, if they target a `stream` type,
we must separate them into separate lines so that the ignore comment
targets the type specifically.
Fix#9210 .
This update the executor so it honors the User when using nomad alloc exec. The bug was that the exec task didn't honor the init command when execing.
Previously, it was required that you `go get github.com/hashicorp/nomad` to be
able to build protos, as the protoc invocation added an include directive that
pointed to `$GOPATH/src`, which is how dependent protos were discovered. As
Nomad now uses Go modules, it won't necessarily be cloned to `$GOPATH`.
(Additionally, if you _had_ go-gotten Nomad at some point, protoc compilation
would have possibly used the _wrong_ protos, as those wouldn't necessarily be
the most up-to-date ones.)
This change modifies the proto files and the `protoc` invocation to handle
discovering dependent protos via protoc plugin modifier statements that are
specific to the protoc plugin being used.
In this change, `make proto` was run to recompile the protos, which results in
changes only to the gzipped `FileDescriptorProto`.
In systemd-resolved hosts with no DNS customizations, the docker driver
DNS setting should be compared to /run/systemd/resolve/resolv.conf while
exec/java drivers should be compared to /etc/resolv.conf.
When system-resolved is enabled, /etc/resolv.conf is a stub that points
to 127.0.0.53. Docker avoids this stub because this address isn't
accessible from the container. The exec/java drivers that don't create
network isolations use the stub though in the default configuration.
* docker: support group allocated ports
* docker: add new ports driver config to specify which group ports are mapped
* docker: update port mapping docs
This fixes few cases where driver eventor goroutines are leaked during
normal operations, but especially so in tests.
This change makes few modifications:
First, it switches drivers to use `Context`s to manage shutdown events.
Previously, it relied on callers invoking `.Shutdown()` function that is
specific to internal drivers only and require casting. Using `Contexts`
provide a consistent idiomatic way to manage lifecycle for both internal
and external drivers.
Also, I discovered few places where we don't clean up a temporary driver
instance in the plugin catalog code, where we dispense a driver to
inspect and validate the schema config without properly cleaning it up.
When an allocation runs for a task driver that can't support volume mounts,
the mounting will fail in a way that can be hard to understand. With host
volumes this usually means failing silently, whereas with CSI the operator
gets inscrutable internals exposed in the `nomad alloc status`.
This changeset adds a MountConfig field to the task driver Capabilities
response. We validate this when the `csi_hook` or `volume_hook` fires and
return a user-friendly error.
Note that we don't currently have a way to get driver capabilities up to the
server, except through attributes. Validating this when the user initially
submits the jobspec would be even better than what we're doing here (and could
be useful for all our other capabilities), but that's out of scope for this
changeset.
Also note that the MountConfig enum starts with "supports all" in order to
support community plugins in a backwards compatible way, rather than cutting
them off from volume mounting unexpectedly.
Operators commonly have docker logs aggregated using various tools and
don't need nomad to manage their docker logs. Worse, Nomad uses a
somewhat heavy docker api call to collect them and it seems to cause
problems when a client runs hundreds of log collections.
Here we add a knob to disable log aggregation completely for nomad.
When log collection is disabled, we avoid running logmon and
docker_logger for the docker tasks in this implementation.
The downside here is once disabled, `nomad logs ...` commands and API
no longer return logs and operators must corrolate alloc-ids with their
aggregated log info.
This is meant as a stop gap measure. Ideally, we'd follow up with at
least two changes:
First, we should optimize behavior when we can such that operators don't
need to disable docker log collection. Potentially by reverting to
using pre-0.9 syslog aggregation in linux environments, though with
different trade-offs.
Second, when/if logs are disabled, nomad logs endpoints should lookup
docker logs api on demand. This ensures that the cost of log collection
is paid sparingly.
This commit introduces support for configuring mount propagation when
mounting volumes with the `volume_mount` stanza on Linux targets.
Similar to Kubernetes, we expose 3 options for configuring mount
propagation:
- private, which is equivalent to `rprivate` on Linux, which does not allow the
container to see any new nested mounts after the chroot was created.
- host-to-task, which is equivalent to `rslave` on Linux, which allows new mounts
that have been created _outside of the container_ to be visible
inside the container after the chroot is created.
- bidirectional, which is equivalent to `rshared` on Linux, which allows both
the container to see new mounts created on the host, but
importantly _allows the container to create mounts that are
visible in other containers an don the host_
private and host-to-task are safe, but bidirectional mounts can be
dangerous, as if the code inside a container creates a mount, and does
not clean it up before tearing down the container, it can cause bad
things to happen inside the kernel.
To add a layer of safety here, we require that the user has ReadWrite
permissions on the volume before allowing bidirectional mounts, as a
defense in depth / validation case, although creating mounts should also require
a priviliged execution environment inside the container.
NetIsolationModes and MustInitiateNetwork were left out of the
driver Capabilities when using an external task driver plugin
Signed-off-by: Lucas BEE <pouulet@gmail.com>
