The ACL token state schema has been updated to utilise two new
indexes which track expiration of tokens that are configured with
an expiration TTL or time. A new state function allows listing
ACL expired tokens which will be used by internal garbage
collection.
The ACL endpoint has been modified so that all validation happens
within a single function call. This is easier to understand and
see at a glance. The ACL token validation now also includes logic
for expiry TTL and times. The ACL endpoint upsert tests have been
condensed into a single, table driven test.
There is a new token canonicalize which provides a single place
for token canonicalization, rather than logic spread in the RPC
handler.
Plan rejections occur when the scheduler work and the leader plan
applier disagree on the feasibility of a plan. This may happen for valid
reasons: since Nomad does parallel scheduling, it is expected that
different workers will have a different state when computing placements.
As the final plan reaches the leader plan applier, it may no longer be
valid due to a concurrent scheduling taking up intended resources. In
these situations the plan applier will notify the worker that the plan
was rejected and that they should refresh their state before trying
again.
In some rare and unexpected circumstances it has been observed that
workers will repeatedly submit the same plan, even if they are always
rejected.
While the root cause is still unknown this mitigation has been put in
place. The plan applier will now track the history of plan rejections
per client and include in the plan result a list of node IDs that should
be set as ineligible if the number of rejections in a given time window
crosses a certain threshold. The window size and threshold value can be
adjusted in the server configuration.
To avoid marking several nodes as ineligible at one, the operation is rate
limited to 5 nodes every 30min, with an initial burst of 10 operations.
This PR adds support for specifying checks in services registered to
the built-in nomad service provider.
Currently only HTTP and TCP checks are supported, though more types
could be added later.
Fixes#13505
This fixes#13505 by treating reserved_ports like we treat a lot of jobspec settings: merging settings from more global stanzas (client.reserved.reserved_ports) "down" into more specific stanzas (client.host_networks[].reserved_ports).
As discussed in #13505 there are other options, and since it's totally broken right now we have some flexibility:
Treat overlapping reserved_ports on addresses as invalid and refuse to start agents. However, I'm not sure there's a cohesive model we want to publish right now since so much 0.9-0.12 compat code still exists! We would have to explain to folks that if their -network-interface and host_network addresses overlapped, they could only specify reserved_ports in one place or the other?! It gets ugly.
Use the global client.reserved.reserved_ports value as the default and treat host_network[].reserverd_ports as overrides. My first suggestion in the issue, but @groggemans made me realize the addresses on the agent's interface (as configured by -network-interface) may overlap with host_networks, so you'd need to remove the global reserved_ports from addresses shared with a shared network?! This seemed really confusing and subtle for users to me.
So I think "merging down" creates the most expressive yet understandable approach. I've played around with it a bit, and it doesn't seem too surprising. The only frustrating part is how difficult it is to observe the available addresses and ports on a node! However that's a job for another PR.
In OSS we can upsert an allocation without worrying about whether that
alloc is in a namespace that actually exists, but in ENT that upsert
will add to the namespace's quotas. Ensure we're doing so in this
secure variables RPC test to fix the test breaking in the ENT repo.
This commit adds configuration parameters to control ACL token
expirations. This includes both limits on the min and max TTL
expiration values, as well as a GC threshold for expired tokens.
* Failing test and TODO for wildcard
* Alias the namespace query parameter for Evals
* eval: fix list when using ACLs and * namespace
Apply the same verification process as in job, allocs and scaling
policy list endpoints to handle the eval list when using an ACL token
with limited namespace support but querying using the `*` wildcard
namespace.
* changelog: add entry for #13530
* ui: set namespace when querying eval
Evals have a unique UUID as ID, but when querying them the Nomad API
still expects a namespace query param, otherwise it assumes `default`.
Co-authored-by: Luiz Aoqui <luiz@hashicorp.com>
When the `Full` flag is passed for key rotation, we kick off a core
job to decrypt and re-encrypt all the secure variables so that they
use the new key.
* SV: CAS
* Implement Check and Set for Delete and Upsert
* Reading the conflict from the state store
* Update endpoint for new error text
* Updated HTTP api tests
* Conflicts to the HTTP api
* SV: structs: Update SV time to UnixNanos
* update mock to UnixNano; refactor
* SV: encrypter: quote KeyID in error
* SV: mock: add mock for namespace w/ SV
We need to track per-namespace storage usage for secure variables even
in Nomad OSS so that a cluster can be seamlessly upgraded from OSS to
ENT without having to re-calculate quota usage.
Provide a hook in the upsert RPC for enforcement of quotas in
ENT. This will be a no-op in Nomad OSS.
Extend the GC job to support periodic key rotation.
Update the GC process to safely support signed workload identity. We
can't GC any key used to sign a workload identity. Finding which key
was used to sign every allocation will be expensive, but there are not
that many keys. This lets us take a conservative approach: find the
oldest live allocation and ensure that we don't GC any key older than
that key.
The blocking query for `Keyring.List` appended the keys for each pass
through the blocking query to the response. This results in mulitple
copies of keys in the response. Overwrite the `reply.Keys` field on
each pass through the blocking query to ensure we only get the
expected page of responses.
Adds a new policy block inside namespaces to control access to secure
variables on the basis of path, with support for globbing.
Splits out VerifyClaim from ResolveClaim.
The ServiceRegistration RPC only needs to be able to verify that a
claim is valid for some allocation in the store; it doesn't care about
implicit policies or capabilities. Split this out to its own method on
the server so that the SecureVariables RPC can reuse it as a separate
step from resolving policies (see next commit).
Support implicit policies based on workload identity
The `Encrypt` method generates an appropriately-sized nonce and uses
that buffer as the prefix for the ciphertext. This keeps the
ciphertext and nonce together for decryption, and reuses the buffer as
much as possible without presenting the temptation to reuse the
cleartext buffer owned by the caller.
We include the key ID as the "additional data" field that's used as an
extra input to the authentication signature, to provide additional
protection that a ciphertext originated with that key.
Refactors the locking for the keyring so that the public methods are
generally (with one commented exception) responsible for taking the
lock and then inner methods are assumed locked.
* Add Path only index for SecureVariables
* Add GetSecureVariablesByPrefix; refactor tests
* Add search for SecureVariables
* Add prefix search for secure variables
This PR splits SecureVariable into SecureVariableDecrypted and
SecureVariableEncrypted in order to use the type system to help
verify that cleartext secret material is not committed to file.
* Make Encrypt function return KeyID
* Split SecureVariable
Co-authored-by: Tim Gross <tgross@hashicorp.com>
In order to support implicit ACL policies for tasks to get their own
secrets, each task would need to have its own ACL token. This would
add extra raft overhead as well as new garbage collection jobs for
cleaning up task-specific ACL tokens. Instead, Nomad will create a
workload Identity Claim for each task.
An Identity Claim is a JSON Web Token (JWT) signed by the server’s
private key and attached to an Allocation at the time a plan is
applied. The encoded JWT can be submitted as the X-Nomad-Token header
to replace ACL token secret IDs for the RPCs that support identity
claims.
Whenever a key is is added to a server’s keyring, it will use the key
as the seed for a Ed25519 public-private private keypair. That keypair
will be used for signing the JWT and for verifying the JWT.
This implementation is a ruthlessly minimal approach to support the
secure variables feature. When a JWT is verified, the allocation ID
will be checked against the Nomad state store, and non-existent or
terminal allocation IDs will cause the validation to be rejected. This
is sufficient to support the secure variables feature at launch
without requiring implementation of a background process to renew
soon-to-expire tokens.
Replication for the secure variables keyring. Because only key
metadata is stored in raft, we need to distribute key material
out-of-band from raft replication. A goroutine runs on each server and
watches for changes to the `RootKeyMeta`. When a new key is received,
attempt to fetch the key from the leader. If the leader doesn't have
the key (which may happen if a key is rotated right before a leader
transition), try to get the key from any peer.
After internal design review, we decided to remove exposing algorithm
choice to the end-user for the initial release. We'll solve nonce
rotation by forcing rotations automatically on key GC (in a core job,
not included in this changeset). Default to AES-256 GCM for the
following criteria:
* faster implementation when hardware acceleration is available
* FIPS compliant
* implementation in pure go
* post-quantum resistance
Also fixed a bug in the decoding from keystore and switched to a
harder-to-misuse encoding method.
The core jobs to garbage collect unused keys and perform full key
rotations will need to be able to query secure variables by key ID for
efficiency. Add an index to the state store and associated query
function and test.
When a server becomes leader, it will check if there are any keys in
the state store, and create one if there is not. The key metadata will
be replicated via raft to all followers, who will then get the key
material via key replication (not implemented in this changeset).
This changeset implements the keystore serialization/deserialization:
* Adds a JSON serialization extension for the `RootKey` struct, along with a metadata stub. When we serialize RootKey to the on-disk keystore, we want to base64 encode the key material but also exclude any frequently-changing fields which are stored in raft.
* Implements methods for loading/saving keys to the keystore.
* Implements methods for restoring the whole keystore from disk.
* Wires it all up with the `Keyring` RPC handlers and fixes up any fallout on tests.
Implement the basic upsert, list, and delete operations for
`RootKeyMeta` needed by the Keyring RPCs.
This changeset also implements two convenience methods
`RootKeyMetaByID` and `GetActiveRootKeyMeta` which are useful for
testing but also will be needed to implement the rest of the RPCs.
Stream snapshot to FSM when restoring from archive
The `RestoreFromArchive` helper decompresses the snapshot archive to a
temporary file before reading it into the FSM. For large snapshots
this performs a lot of disk IO. Stream decompress the snapshot as we
read it, without first writing to a temporary file.
Add bexpr filters to the `RestoreFromArchive` helper.
The operator can pass these as `-filter` arguments to `nomad operator
snapshot state` (and other commands in the future) to include only
desired data when reading the snapshot.
Whenever a node joins the cluster, either for the first time or after
being `down`, we emit a evaluation for every system job to ensure all
applicable system jobs are running on the node.
This patch adds an optimization to skip creating evaluations for system
jobs not in the current node's DC. While the scheduler performs the same
feasability check, skipping the creation of the evaluation altogether
saves disk, network, and memory.
This PR fixes a bug where client configuration max_kill_timeout was
not being enforced. The feature was introduced in 9f44780 but seems
to have been removed during the major drivers refactoring.
We can make sure the value is enforced by pluming it through the DriverHandler,
which now uses the lesser of the task.killTimeout or client.maxKillTimeout.
Also updates Event.SetKillTimeout to require both the task.killTimeout and
client.maxKillTimeout so that we don't make the mistake of using the wrong
value - as it was being given only the task.killTimeout before.
api: apply new ACL check for wildcard namespace
In #13606 the ACL check was refactored to better support the all
namespaces wildcard (`*`). This commit applies the changes to the jobs
and alloc list endpoints.
Improve how the all namespaces wildcard (`*`) is handled when checking
ACL permissions. When using the wildcard namespace the `AllowNsOp` would
return false since it looks for a namespace called `*` to match.
This commit changes this behavior to return `true` when the queried
namespace is `*` and the token allows the operation in _any_ namespace.
Actual permission must be checked per object. The helper function
`AllowNsOpFunc` returns a function that can be used to make this
verification.
* core: allow pause/un-pause of eval broker on region leader.
* agent: add ability to pause eval broker via scheduler config.
* cli: add operator scheduler commands to interact with config.
* api: add ability to pause eval broker via scheduler config
* e2e: add operator scheduler test for eval broker pause.
* docs: include new opertor scheduler CLI and pause eval API info.
It appears way back when this was first implemented in
9a917281af9c0a97a6c59575eaa52c5c86ffc60d, it was renamed from
NodeEvict (with a correct comment) to NodeUpdate. The comment was
changed from referring to only evictions to referring to "all allocs" in
the first sentence and "stop or evict" in the second.
This confuses every time I see it because I read the name (NodeUpdate)
and first sentence ("all the allocs") and assume this represents *all*
allocations... which isn't true.
I'm going to assume I'm the only one who doesn't read the 2nd sentence
and that's why this suboptimal wording has lasted 7 years, but can we
change it for my sake?
When calculating a services namespace for registration, the code
assumed the first task within the task array would include a
service block. This is incorrect as it is possible only a latter
task within the array contains a service definition.
This change fixes the logic, so we correctly search for a service
definition before identifying the namespace.
This PR adds the 'choose' query parameter to the '/v1/service/<service>' endpoint.
The value of 'choose' is in the form '<number>|<key>', number is the number
of desired services and key is a value unique but consistent to the requester
(e.g. allocID).
Folks aren't really expected to use this API directly, but rather through consul-template
which will soon be getting a new helper function making use of this query parameter.
Example,
curl 'localhost:4646/v1/service/redis?choose=2|abc123'
Note: consul-templte v0.29.1 includes the necessary nomadServices functionality.
The plan applier has to get a snapshot with a minimum index for the
plan it's working on in order to ensure consistency. Under heavy raft
loads, we can exceed the timeout. When this happens, we hit a bug
where the plan applier blocks waiting on the `indexCh` forever, and
all schedulers will block in `Plan.Submit`.
Closing the `indexCh` when the `asyncPlanWait` is done with it will
prevent the deadlock without impacting correctness of the previous
snapshot index.
This changeset includes the a PoC failing test that works by injecting
a large timeout into the state store. We need to turn this into a test
we can run normally without breaking the state store before we can
merge this PR.
Increase `snapshotMinIndex` timeout to 10s.
This timeout creates backpressure where any concurrent `Plan.Submit`
RPCs will block waiting for results. This sheds load across all
servers and gives raft some CPU to catch up, because schedulers won't
dequeue more work while waiting. Increase it to 10s based on
observations of large production clusters.
If the node has been GC'd or is down, we can't send it a node
unpublish. The CSI spec requires that we don't send the controller
unpublish before the node unpublish, but in the case where a node is
gone we can't know the final fate of the node unpublish step.
The `csi_hook` on the client will unpublish if the allocation has
stopped and if the host is terminated there's no mount for the volume
anyways. So we'll now assume that the node has unpublished at its
end. If it hasn't, any controller unpublish will potentially hang or
error and need to be retried.
When deleting evaluations and allocations during a reap event, the
index table entries for evals and allocs was updated irregardless
of whether changes were made.
This change modifies the state logic so that the index table is
only modified when the corresponding table has actually been
modified. Along with matching expected behaviour, this change has
the potential to reduce the number of times blocking queries will
return without any real state change.
Almost all GC jobs check the index of the objects being GC'd to see if
they're older than a configured threshold. This code was repeated six
times in `CoreScheduler` with only logging changes, so it seems safe
to extract it as its own method.
Fix numerous go-getter security issues:
- Add timeouts to http, git, and hg operations to prevent DoS
- Add size limit to http to prevent resource exhaustion
- Disable following symlinks in both artifacts and `job run`
- Stop performing initial HEAD request to avoid file corruption on
retries and DoS opportunities.
**Approach**
Since Nomad has no ability to differentiate a DoS-via-large-artifact vs
a legitimate workload, all of the new limits are configurable at the
client agent level.
The max size of HTTP downloads is also exposed as a node attribute so
that if some workloads have large artifacts they can specify a high
limit in their jobspecs.
In the future all of this plumbing could be extended to enable/disable
specific getters or artifact downloading entirely on a per-node basis.
* test: use `T.TempDir` to create temporary test directory
This commit replaces `ioutil.TempDir` with `t.TempDir` in tests. The
directory created by `t.TempDir` is automatically removed when the test
and all its subtests complete.
Prior to this commit, temporary directory created using `ioutil.TempDir`
needs to be removed manually by calling `os.RemoveAll`, which is omitted
in some tests. The error handling boilerplate e.g.
defer func() {
if err := os.RemoveAll(dir); err != nil {
t.Fatal(err)
}
}
is also tedious, but `t.TempDir` handles this for us nicely.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* test: fix TestLogmon_Start_restart on Windows
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* test: fix failing TestConsul_Integration
t.TempDir fails to perform the cleanup properly because the folder is
still in use
testing.go:967: TempDir RemoveAll cleanup: unlinkat /tmp/TestConsul_Integration2837567823/002/191a6f1a-5371-cf7c-da38-220fe85d10e5/web/secrets: device or resource busy
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
In #12324 we made it so that plugins wait until the node drain is
complete, as we do for system jobs. But we neglected to mark the node
drain as complete once only plugins (or system jobs) remaining, which
means that the node drain is left in a draining state until the
`deadline` time expires. This was incorrectly documented as expected
behavior in #12324.
After a more detailed analysis of this feature, the approach taken in
PR #12449 was found to be not ideal due to poor UX (users are
responsible for setting the entity alias they would like to use) and
issues around jobs potentially masquerading itself as another Vault
entity.
This PR introduces the `address` field in the `service` block so that Nomad
or Consul services can be registered with a custom `.Address.` to advertise.
The address can be an IP address or domain name. If the `address` field is
set, the `service.address_mode` must be set in `auto` mode.
This PR updates the changelog, adds notes the 1.3 upgrade guide, and
updates the connect integration docs with documentation about the new
requirement on Consul ACL policies of Consul agent default anonymous ACL
tokens.
* Add os to NodeListStub struct.
Signed-off-by: Shishir Mahajan <smahajan@roblox.com>
* Add os as a query param to /v1/nodes.
Signed-off-by: Shishir Mahajan <smahajan@roblox.com>
* Add test: os as a query param to /v1/nodes.
Signed-off-by: Shishir Mahajan <smahajan@roblox.com>
The CSI HTTP API has to transform the CSI volume to redact secrets,
remove the claims fields, and to consolidate the allocation stubs into
a single slice of alloc stubs. This was done manually in #8590 but
this is a large amount of code and has proven both very bug prone
(see #8659, #8666, #8699, #8735, and #12150) and requires updating
lots of code every time we add a field to volumes or plugins.
In #10202 we introduce encoding improvements for the `Node` struct
that allow a more minimal transformation. Apply this same approach to
serializing `structs.CSIVolume` to API responses.
Also, the original reasoning behind #8590 for plugins no longer holds
because the counts are now denormalized within the state store, so we
can simply remove this transformation entirely.
* services: add pagination and filter support to info RPC.
* cli: add filter flag to service info command.
* docs: add pagination and filter details to services info API.
* paginator: minor updates to comment and func signature.
Many of our scripts have a non-portable interpreter line for bash and
use bash-specific variables like `BASH_SOURCE`. Update the interpreter
line to be portable between various Linuxes and macOS without
complaint from posix shell users.
* planner: expose ServerMeetsMinimumVersion via Planner interface
* filterByTainted: add flag indicating disconnect support
* allocReconciler: accept and pass disconnect support flag
* tests: update dependent tests
Move some common Vault API data struct decoding out of the Vault client
so it can be reused in other situations.
Make Vault job validation its own function so it's easier to expand it.
Rename the `Job.VaultPolicies` method to just `Job.Vault` since it
returns the full Vault block, not just their policies.
Set `ChangeMode` on `Vault.Canonicalize`.
Add some missing tests.
Allows specifying an entity alias that will be used by Nomad when
deriving the task Vault token.
An entity alias assigns an indentity to a token, allowing better control
and management of Vault clients since all tokens with the same indentity
alias will now be considered the same client. This helps track Nomad
activity in Vault's audit logs and better control over Vault billing.
Add support for a new Nomad server configuration to define a default
entity alias to be used when deriving Vault tokens. This default value
will be used if the task doesn't have an entity alias defined.
This PR adds support for the raw_exec driver on systems with only cgroups v2.
The raw exec driver is able to use cgroups to manage processes. This happens
only on Linux, when exec_driver is enabled, and the no_cgroups option is not
set. The driver uses the freezer controller to freeze processes of a task,
issue a sigkill, then unfreeze. Previously the implementation assumed cgroups
v1, and now it also supports cgroups v2.
There is a bit of refactoring in this PR, but the fundamental design remains
the same.
Closes#12351#12348
The volume watcher design was based on deploymentwatcher and drainer,
but has an important difference: we don't want to maintain a goroutine
for the lifetime of the volume. So we stop the volumewatcher goroutine
for a volume when that volume has no more claims to free. But the
shutdown races with updates on the parent goroutine, and it's possible
to drop updates. Fortunately these updates are picked up on the next
core GC job, but we're most likely to hit this race when we're
replacing an allocation and that's the time we least want to wait.
Wait until the volume has "settled" before stopping this goroutine so
that the race between shutdown and the parent goroutine sending on
`<-updateCh` is pushed to after the window we most care about quick
freeing of claims.
* Fixes a resource leak when volumewatchers are no longer needed. The
volume is nil and can't ever be started again, so the volume's
`watcher` should be removed from the top-level `Watcher`.
* De-flakes the GC job test: the test throws an error because the
claimed node doesn't exist and is unreachable. This flaked instead of
failed because we didn't correctly wait for the first pass through the
volumewatcher.
Make the GC job wait for the volumewatcher to reach the quiescent
timeout window state before running the GC eval under test, so that
we're sure the GC job's work isn't being picked up by processing one
of the earlier claims. Update the claims used so that we're sure the
GC pass won't hit a node unpublish error.
* Adds trace logging to unpublish operations
In the same manner as the delete RPC, the list and read service
registration endpoints can be called either by external operators
or Nomad nodes. The latter occurs when a template is being
rendered which includes Nomad API template funcs. In this case,
the auth token is looked up as the node secret ID for auth.
* lint: require should not be aliased in core_sched_test
* lint: require should not be aliased in volumes_watcher_test
* testing: don't alias state package in core_sched_test
In #12112 and #12113 we solved for the problem of races in releasing
volume claims, but there was a case that we missed. During a node
drain with a controller attach/detach, we can hit a race where we call
controller publish before the unpublish has completed. This is
discouraged in the spec but plugins are supposed to handle it
safely. But if the storage provider's API is slow enough and the
plugin doesn't handle the case safely, the volume can get "locked"
into a state where the provider's API won't detach it cleanly.
Check the claim before making any external controller publish RPC
calls so that Nomad is responsible for the canonical information about
whether a volume is currently claimed.
This has a couple side-effects that also had to get fixed here:
* Changing the order means that the volume will have a past claim
without a valid external node ID because it came from the client, and
this uncovered a separate bug where we didn't assert the external node
ID was valid before returning it. Fallthrough to getting the ID from
the plugins in the state store in this case. We avoided this
originally because of concerns around plugins getting lost during node
drain but now that we've fixed that we may want to revisit it in
future work.
* We should make sure we're handling `FailedPrecondition` cases from
the controller plugin the same way we handle other retryable cases.
* Several tests had to be updated because they were assuming we fail
in a particular order that we're no longer doing.
Revert a small part of #11600 after @lgfa29 discovered it would break
compatibility with Nomad <= v1.2!
Nomad <= v1.2 expects the `vsn` tag to exist in Serf. It has always been
`1`. It has no functional purpose. However it causes a parsing error if
it is not set:
https://github.com/hashicorp/nomad/blob/v1.2.6/nomad/util.go#L103-L108
This means Nomad servers at version v1.2 or older will not allow servers
without this tag to join.
The `mvn` minor version tag is also checked, but soft fails. I'm not
setting that because I want as much of this cruft gone as possible.
Downgrading the Raft version protocol is not a supported operation.
Checking for a downgrade is hard since this information is not stored in
any persistent place. When a server re-joins a cluster with a prior Raft
version, the Serf tag is updated so Nomad can't tell that the version
changed.
Mixed version clusters must be supported to allow for zero-downtime
rolling upgrades. During this it's expected that the cluster will have
mixed Raft versions. Enforcing consistency strong version consistency
would disrupt this flow.
The approach taken here is to store the Raft version on disk. When the
server starts the `raft_protocol` value is written to the file
`data_dir/raft/version`. If that file already exists, its content is
checked against the current `raft_protocol` value to detect downgrades
and prevent the server from starting.
Any other types of errors are ignore to prevent disruptions that are
outside the control of operators. The only option in cases of an invalid
or corrupt file would be to delete it, making this check useless. So
just overwrite its content with the new version and provide guidance on
how to check that their cluster is an expected state.
Pass-through the `-secret` and `-parameter` flags to allow setting
parameters for the snapshot and overriding the secrets we've stored on
the CSI volume in the state store.
Listing snapshots was incorrectly returning nanoseconds instead of
seconds, and formatting of timestamps both list and create snapshot
was treating the timestamp as though it were nanoseconds instead of
seconds. This resulted in create timestamps always being displayed as
zero values.
Fix the unit conversion error in the command line and the incorrect
extraction in the CSI plugin client code. Beef up the unit tests to
make sure this code is actually exercised.
A volume that has single-use access mode is feasibility checked during
scheduling to ensure that only a single reader or writer claim
exists. However, because feasibility checking is done one alloc at a
time before the plan is written, a job that's misconfigured to have
count > 1 that mounts one of these volumes will pass feasibility
checking.
Enforce the check at validation time instead to prevent us from even
trying to evaluation a job that's misconfigured this way.
When a node fails its heart beating a number of actions are taken
to ensure state is cleaned. Service registrations a loosely tied
to nodes, therefore we should remove these from state when a node
is considered terminally down.
When a node is garbage collected, we assume that the volume is no
longer attached to it and ignore the `ErrUnknownNode` error. But we
used `errors.Is` to check for a wrapped error, and RPC flattens the
errors during serialization. This results in an error check that works
in automated testing but not in real clusters. Use a string contains
check instead.
Raft v3 introduced a new API for adding and removing peers that takes
the peer ID instead of the address.
Prior to this change, Nomad would use the remote peer Raft version for
deciding which API to use, but this would not work in the scenario where
a Raft v3 server tries to remove a Raft v2 server; the code running uses
v3 so it's unable to call the v2 API.
This change uses the Raft version of the server running the code to
decide which API to use. If the remote peer is a Raft v2, it uses the
server address as the ID.
When a node is drained, system jobs are left until last so that
operators can rely on things like log shippers running even as their
applications are getting drained off. Include CSI plugins in this set
so that Controller plugins deployed as services can be handled as
gracefully as Node plugins that are running as system jobs.
* Fix plugin capability sorting.
The `sort.StringSlice` method in the stdlib doesn't actually sort, but
instead constructs a sorting type which you call `Sort()` on.
* Sort allocations for plugins by modify index.
Present allocations in modify index order so that newest allocations
show up at the top of the list. This results in sorted allocs in
`nomad plugin status :id`, just like `nomad job status :id`.
* Sort allocations for volumes in HTTP response.
Present allocations in modify index order so that newest allocations
show up at the top of the list. This results in sorted allocs in
`nomad volume status :id`, just like `nomad job status :id`.
This is implemented in the HTTP response and not in the state store
because the state store maintains two separate lists of allocs that
are merged before sending over the API.
* Fix length of alloc IDs in `nomad volume status` output
Part 2 of breaking up https://github.com/hashicorp/nomad/pull/12255
This PR makes it so gotestsum is invoked only in CircleCI. Also the
HCLogger(t) is plumbed more correctly in TestServer and TestAgent so
that they respect NOMAD_TEST_LOG_LEVEL.
The reason for these is we'll want to disable logging in GHA,
where spamming the disk with logs really drags performance.
The `related` query param is used to indicate that the request should
return a list of related (next, previous, and blocked) evaluations.
Co-authored-by: Jasmine Dahilig <jasmine@hashicorp.com>
When a Nomad server becomes the Raft leader, it must perform several
actions defined in the establishLeadership function. If any of these
actions fail, Raft will think the node is the leader, but it will not
actually be able to act as a Nomad leader.
In this scenario, leadership must be revoked and transferred to another
server if possible, or the node should retry the establishLeadership
steps.
The alloc list test with pagination was creating allocs before the
target namespace existed. This works in OSS but fails in ENT because
quotas are checked before the alloc can be created, so the namespace
must exist beforehand.
The `Job.List` RPC attaches a `JobSummary` to each job stub. We're
using the request namespace and not the job namespace for that query,
which results in a nil `JobSummary` whenever we pass the wildcard
namespace. This is incorrect and causes panics in downstream consumers
like the CLI, which assume the `JobSummary` is non-nil as an unstate
invariant.
