* Improve managed sink run loop and reloading
resetCh no longer needed
length of buffer equal to count of items, not count of events in each item
update equality fn name, pr feedback
clean up sink manager sink creation
* update test to reflect changes
* bad editor find and replace
* pr feedback
* Process to send events to configured sinks
This PR adds a SinkManager to a server which is responsible for managing
managed sinks. Managed sinks subscribe to the event broker and send
events to a sink writer (webhook). When changes to the eventstore are
made the sinkmanager and managed sink are responsible for reloading or
starting a new managed sink.
* periodically check in sink progress to raft
Save progress on the last successfully sent index to raft. This allows a
managed sink to resume close to where it left off in the event of a lost
server or leadership change
dereference eventsink so we can accurately use the watchch
When using a pointer to eventsink struct it was updated immediately and our reload logic would not trigger
* network sink rpc/api plumbing
state store methods and restore
upsert sink test
get sink
delete sink
event sink list and tests
go generate new msg types
validate sink on upsert
* go generate
* remove event durability
temporarily removing go-memdb event durability until a new strategy is developed on how to best handled increased durability needs
* drop events table schema and state store methods
* fix neweventbuffer invocations
properly wire up durable event count
move newline responsibility
moves newline creation from NDJson to the http handler, json stream only encodes and sends now
ignore snapshot restore if broker is disabled
enable dev mode to access event steam without acl
use mapping instead of switch
use pointers for config sizes, remove unused ttl, simplify closed conn logic
This Commit adds an /v1/events/stream endpoint to stream events from.
The stream framer has been updated to include a SendFull method which
does not fragment the data between multiple frames. This essentially
treats the stream framer as a envelope to adhere to the stream framer
interface in the UI.
If the `encode` query parameter is omitted events will be streamed as
newline delimted JSON.
This PR adds initial support for running Consul Connect Ingress Gateways (CIGs) in Nomad. These gateways are declared as part of a task group level service definition within the connect stanza.
```hcl
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
ingress {
// ingress-gateway configuration entry
}
}
}
}
```
A gateway can be run in `bridge` or `host` networking mode, with the caveat that host networking necessitates manually specifying the Envoy admin listener (which cannot be disabled) via the service port value.
Currently Envoy is the only supported gateway implementation in Consul, and Nomad only supports running Envoy as a gateway using the docker driver.
Aims to address #8294 and tangentially #8647
This changeset updates `nomad/volumewatcher` to take advantage of the
`CSIVolume.Unpublish` RPC. This lets us eliminate a bunch of code and
associated tests. The raft batching code can be safely dropped, as the
characteristic times of the CSI RPCs are on the order of seconds or even
minutes, so batching up raft RPCs added complexity without any real world
performance wins.
Includes refactor w/ test cleanup and dead code elimination in volumewatcher
adds in oss components to support enterprise multi-vault namespace feature
upgrade specific doc on vault multi-namespaces
vault docs
update test to reflect new error
* `nextRegion` should take status parameter
* thread Deployment/Job RPCs thru `nextRegion`
* add `nextRegion` calls to `deploymentwatcher`
* use a better description for paused for peer
This changeset adds a subsystem to run on the leader, similar to the
deployment watcher or node drainer. The `Watcher` performs a blocking
query on updates to the `CSIVolumes` table and triggers reaping of
volume claims.
This will avoid tying up scheduling workers by immediately sending
volume claim workloads into their own loop, rather than blocking the
scheduling workers in the core GC job doing things like talking to CSI
controllers
The volume watcher is enabled on leader step-up and disabled on leader
step-down.
The volume claim GC mechanism now makes an empty claim RPC for the
volume to trigger an index bump. That in turn unblocks the blocking
query in the volume watcher so it can assess which claims can be
released for a volume.
If a volume-claiming alloc stops and the CSI Node plugin that serves
that alloc's volumes is missing, there's no way for the allocrunner
hook to send the `NodeUnpublish` and `NodeUnstage` RPCs.
This changeset addresses this issue with a redesign of the client-side
for CSI. Rather than unmounting in the alloc runner hook, the alloc
runner hook will simply exit. When the server gets the
`Node.UpdateAlloc` for the terminal allocation that had a volume claim,
it creates a volume claim GC job. This job will made client RPCs to a
new node plugin RPC endpoint, and only once that succeeds, move on to
making the client RPCs to the controller plugin. If the node plugin is
unavailable, the GC job will fail and be requeued.
Currently the handling of CSINode RPCs does not correctly handle
forwarding RPCs to Nodes.
This commit fixes this by introducing a shim RPC
(nomad/client_csi_enpdoint) that will correctly forward the request to
the owning node, or submit the RPC to the client.
In the process it also cleans up handling a little bit by adding the
`CSIControllerQuery` embeded struct for required forwarding state.
The CSIControllerQuery embeding the requirement of a `PluginID` also
means we could move node targetting into the shim RPC if wanted in the
future.
This change updates tests to honor `BootstrapExpect` exclusively when
forming test clusters and removes test only knobs, e.g.
`config.DevDisableBootstrap`.
Background:
Test cluster creation is fragile. Test servers don't follow the
BootstapExpected route like production clusters. Instead they start as
single node clusters and then get rejoin and may risk causing brain
split or other test flakiness.
The test framework expose few knobs to control those (e.g.
`config.DevDisableBootstrap` and `config.Bootstrap`) that control
whether a server should bootstrap the cluster. These flags are
confusing and it's unclear when to use: their usage in multi-node
cluster isn't properly documented. Furthermore, they have some bad
side-effects as they don't control Raft library: If
`config.DevDisableBootstrap` is true, the test server may not
immediately attempt to bootstrap a cluster, but after an election
timeout (~50ms), Raft may force a leadership election and win it (with
only one vote) and cause a split brain.
The knobs are also confusing as Bootstrap is an overloaded term. In
BootstrapExpect, we refer to bootstrapping the cluster only after N
servers are connected. But in tests and the knobs above, it refers to
whether the server is a single node cluster and shouldn't wait for any
other server.
Changes:
This commit makes two changes:
First, it relies on `BootstrapExpected` instead of `Bootstrap` and/or
`DevMode` flags. This change is relatively trivial.
Introduce a `Bootstrapped` flag to track if the cluster is bootstrapped.
This allows us to keep `BootstrapExpected` immutable. Previously, the
flag was a config value but it gets set to 0 after cluster bootstrap
completes.
Nomad jobs may be configured with a TaskGroup which contains a Service
definition that is Consul Connect enabled. These service definitions end
up establishing a Consul Connect Proxy Task (e.g. envoy, by default). In
the case where Consul ACLs are enabled, a Service Identity token is required
for these tasks to run & connect, etc. This changeset enables the Nomad Server
to recieve RPC requests for the derivation of SI tokens on behalf of instances
of Consul Connect using Tasks. Those tokens are then relayed back to the
requesting Client, which then injects the tokens in the secrets directory of
the Task.
Enable any Server to lookup the unique ClusterID. If one has not been
generated, and this node is the leader, generate a UUID and attempt to
apply it through raft.
The value is not yet used anywhere in this changeset, but is a prerequisite
for gh-6701.
Fixes a deadlock in leadership handling if leadership flapped.
Raft propagates leadership transition to Nomad through a NotifyCh channel.
Raft blocks when writing to this channel, so channel must be buffered or
aggressively consumed[1]. Otherwise, Raft blocks indefinitely in `raft.runLeader`
until the channel is consumed[1] and does not move on to executing follower
related logic (in `raft.runFollower`).
While Raft `runLeader` defer function blocks, raft cannot process any other
raft operations. For example, `run{Leader|Follower}` methods consume
`raft.applyCh`, and while runLeader defer is blocked, all raft log applications
or config lookup will block indefinitely.
Sadly, `leaderLoop` and `establishLeader` makes few Raft calls!
`establishLeader` attempts to auto-create autopilot/scheduler config [3]; and
`leaderLoop` attempts to check raft configuration [4]. All of these calls occur
without a timeout.
Thus, if leadership flapped quickly while `leaderLoop/establishLeadership` is
invoked and hit any of these Raft calls, Raft handler _deadlock_ forever.
Depending on how many times it flapped and where exactly we get stuck, I suspect
it's possible to get in the following case:
* Agent metrics/stats http and RPC calls hang as they check raft.Configurations
* raft.State remains in Leader state, and server attempts to handle RPC calls
(e.g. node/alloc updates) and these hang as well
As we create goroutines per RPC call, the number of goroutines grow over time
and may trigger a out of memory errors in addition to missed updates.
[1] d90d6d6bda/config.go (L190-L193)
[2] d90d6d6bda/raft.go (L425-L436)
[3] 2a89e47746/nomad/leader.go (L198-L202)
[4] 2a89e47746/nomad/leader.go (L877)
Adds new package that can be used by client and server RPC endpoints to
facilitate monitoring based off of a logger
clean up old code
small comment about write
rm old comment about minsize
rename to Monitor
Removes connection logic from monitor command
Keep connection logic in endpoints, use a channel to send results from
monitoring
use new multisink logger and interfaces
small test for dropped messages
update go-hclogger and update sink/intercept logger interfaces
* nomad: add admission controller framework
* nomad: add admission controller framework and Consul Connect hooks
* run admission controllers before checking permissions
* client: add default node meta for connect configurables
* nomad: remove validateJob func since it has been moved to admission controller
* nomad: use new TaskKind type
* client: use consts for connect sidecar image and log level
* Apply suggestions from code review
Co-Authored-By: Michael Schurter <mschurter@hashicorp.com>
* nomad: add job register test with connect sidecar
* Update nomad/job_endpoint_hooks.go
Co-Authored-By: Michael Schurter <mschurter@hashicorp.com>
Here, we ensure that when leader only responds to RPC calls when state
store is up to date. At leadership transition or launch with restored
state, the server local store might not be caught up with latest raft
logs and may return a stale read.
The solution here is to have an RPC consistency read gate, enabled when
`establishLeadership` completes before we respond to RPC calls.
`establishLeadership` is gated by a `raft.Barrier` which ensures that
all prior raft logs have been applied.
Conversely, the gate is disabled when leadership is lost.
This is very much inspired by https://github.com/hashicorp/consul/pull/3154/files
