* cleanup: fixup linter warnings in schedular/feasible.go
* core: numeric operands comparisons in constraints
This PR changes constraint comparisons to be numeric rather than
lexical if both operands are integers or floats.
Inspiration #4856Closes#4729Closes#14719
* fix: always parse as int64
Extension of #14673
Once Vault is initially fingerprinted, extend the period since changes
should be infrequent and the fingerprint is relatively expensive since
it is contacting a central Vault server.
Also move the period timer reset *after* the fingerprint. This is
similar to #9435 where the idea is to ensure the retry period starts
*after* the operation is attempted. 15s will be the *minimum* time
between fingerprints now instead of the *maximum* time between
fingerprints.
In the case of Vault fingerprinting, the original behavior might cause
the following:
1. Timer is reset to 15s
2. Fingerprint takes 16s
3. Timer has already elapsed so we immediately Fingerprint again
Even if fingerprinting Vault only takes a few seconds, that may very
well be due to excessive load and backing off our fingerprints is
desirable. The new bevahior ensures we always wait at least 15s between
fingerprint attempts and should allow some natural jittering based on
server load and network latency.
Clients periodically fingerprint Vault and Consul to ensure the server has
updated attributes in the client's fingerprint. If the client can't reach
Vault/Consul, the fingerprinter clears the attributes and requires a node
update. Although this seems like correct behavior so that we can detect
intentional removal of Vault/Consul access, it has two serious failure modes:
(1) If a local Consul agent is restarted to pick up configuration changes and the
client happens to fingerprint at that moment, the client will update its
fingerprint and result in evaluations for all its jobs and all the system jobs
in the cluster.
(2) If a client loses Vault connectivity, the same thing happens. But the
consequences are much worse in the Vault case because Vault is not run as a
local agent, so Vault connectivity failures are highly correlated across the
entire cluster. A 15 second Vault outage will cause a new `node-update`
evalution for every system job on the cluster times the number of nodes, plus
one `node-update` evaluation for every non-system job on each node. On large
clusters of 1000s of nodes, we've seen this create a large backlog of evaluations.
This changeset updates the fingerprinting behavior to keep the last fingerprint
if Consul or Vault queries fail. This prevents a storm of evaluations at the
cost of requiring a client restart if Consul or Vault is intentionally removed
from the client.
In Nomad 1.2.6 we shipped `eval list`, which accepts a `-json` flag, and
deprecated the usage of `eval status` without an evaluation ID with an upgrade
note that it would be removed in Nomad 1.4.0. This changeset completes that
work.
* scheduler: stopped-yet-running allocs are still running
* scheduler: test new stopped-but-running logic
* test: assert nonoverlapping alloc behavior
Also add a simpler Wait test helper to improve line numbers and save few
lines of code.
* docs: tried my best to describe #10446
it's not concise... feedback welcome
* scheduler: fix test that allowed overlapping allocs
* devices: only free devices when ClientStatus is terminal
* test: output nicer failure message if err==nil
Co-authored-by: Mahmood Ali <mahmood@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
This PR documents a change made in the enterprise version of nomad that addresses the following issue:
When a user tries to filter audit logs, they do so with a stanza that looks like the following:
audit {
enabled = true
filter "remove deletes" {
type = "HTTPEvent"
endpoints = ["*"]
stages = ["OperationComplete"]
operations = ["DELETE"]
}
}
When specifying both an "endpoint" and a "stage", the events with both matching a "endpoint" AND a matching "stage" will be filtered.
When specifying both an "endpoint" and an "operation" the events with both matching a "endpoint" AND a matching "operation" will be filtered.
When specifying both a "stage" and an "operation" the events with a matching a "stage" OR a matching "operation" will be filtered.
The "OR" logic with stages and operations is unexpected and doesn't allow customers to get specific on which events they want to filter. For instance the following use-case is impossible to achieve: "I want to filter out all OperationReceived events that have the DELETE verb".
When a Nomad agent starts and loads jobs that already existed in the
cluster, the default template uid and gid was being set to 0, since this
is the zero value for int. This caused these jobs to fail in
environments where it was not possible to use 0, such as in Windows
clients.
In order to differentiate between an explicit 0 and a template where
these properties were not set we need to use a pointer.
Fix numerous go-getter security issues:
- Add timeouts to http, git, and hg operations to prevent DoS
- Add size limit to http to prevent resource exhaustion
- Disable following symlinks in both artifacts and `job run`
- Stop performing initial HEAD request to avoid file corruption on
retries and DoS opportunities.
**Approach**
Since Nomad has no ability to differentiate a DoS-via-large-artifact vs
a legitimate workload, all of the new limits are configurable at the
client agent level.
The max size of HTTP downloads is also exposed as a node attribute so
that if some workloads have large artifacts they can specify a high
limit in their jobspecs.
In the future all of this plumbing could be extended to enable/disable
specific getters or artifact downloading entirely on a per-node basis.
This test exercises upgrades between 0.8 and Nomad versions greater
than 0.9. We have not supported 0.8.x in a very long time and in any
case the test has been marked to skip because the downloader doesn't
work.
This PR updates the changelog, adds notes the 1.3 upgrade guide, and
updates the connect integration docs with documentation about the new
requirement on Consul ACL policies of Consul agent default anonymous ACL
tokens.
This PR expands on the work done in #12543 to
- prefix the tag, so it is now "nomad.alloc_id" to be more consistent with Consul tags
- merge into pre-existing envoy_stats_tags fields
- update the upgrade guide docs
- update changelog
Resolves#12095 by WONTFIXing it.
This approach disables `writeToFile` as it allows arbitrary host
filesystem writes and is only a small quality of life improvement over
multiple `template` stanzas.
This approach has the significant downside of leaving people who have
altered their `template.function_denylist` *still vulnerable!* I added
an upgrade note, but we should have implemented the denylist as a
`map[string]bool` so that new funcs could be denied without overriding
custom configurations.
This PR also includes a bug fix that broke enabling all consul-template
funcs. We repeatedly failed to differentiate between a nil (unset)
denylist and an empty (allow all) one.
This PR introduces support for using Nomad on systems with cgroups v2 [1]
enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux
distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems
for Nomad users.
Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer,
but not so for managing cpuset cgroups. Before, Nomad has been making use of
a feature in v1 where a PID could be a member of more than one cgroup. In v2
this is no longer possible, and so the logic around computing cpuset values
must be modified. When Nomad detects v2, it manages cpuset values in-process,
rather than making use of cgroup heirarchy inheritence via shared/reserved
parents.
Nomad will only activate the v2 logic when it detects cgroups2 is mounted at
/sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2
mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to
use the v1 logic, and should operate as before. Systems that do not support
cgroups v2 are also not affected.
When v2 is activated, Nomad will create a parent called nomad.slice (unless
otherwise configured in Client conifg), and create cgroups for tasks using
naming convention <allocID>-<task>.scope. These follow the naming convention
set by systemd and also used by Docker when cgroups v2 is detected.
Client nodes now export a new fingerprint attribute, unique.cgroups.version
which will be set to 'v1' or 'v2' to indicate the cgroups regime in use by
Nomad.
The new cpuset management strategy fixes#11705, where docker tasks that
spawned processes on startup would "leak". In cgroups v2, the PIDs are
started in the cgroup they will always live in, and thus the cause of
the leak is eliminated.
[1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.htmlCloses#11289Fixes#11705#11773#11933
The previous output of the `nomad server members` command would output a
column named `Protocol` that displayed the Serf protocol being currently
used by servers.
This is not a configurable option, so it holds very little value to
operators. It is also easy to confuse it with the Raft Protocol version,
which is configurable and highly relevant to operators.
This commit replaces the previous `Protocol` column with the new `Raft
Version`. It also updates the `-detailed` flag to be called `-verbose`
so it matches other commands. The detailed output now also outputs the
same information as the standard output with the addition of the
previous `Protocol` column and `Tags`.
When a Nomad server becomes the Raft leader, it must perform several
actions defined in the establishLeadership function. If any of these
actions fail, Raft will think the node is the leader, but it will not
actually be able to act as a Nomad leader.
In this scenario, leadership must be revoked and transferred to another
server if possible, or the node should retry the establishLeadership
steps.
The dynamic plugin registry assumes that plugins are singletons, which
matches the behavior of other Nomad plugins. But because dynamic
plugins like CSI are implemented by allocations, we need to handle the
possibility of multiple allocations for a given plugin type + ID, as
well as behaviors around interleaved allocation starts and stops.
Update the data structure for the dynamic registry so that more recent
allocations take over as the instance manager singleton, but we still
preserve the previous running allocations so that restores work
without racing.
Multiple allocations can run on a client for the same plugin, even if
only during updates. Provide each plugin task a unique path for the
control socket so that the tasks don't interfere with each other.
Use the new filtering and pagination capabilities of the `Eval.List`
RPC to provide filtering and pagination at the command line.
Also includes note that `nomad eval status -json` is deprecated and
will be replaced with a single evaluation view in a future version of
Nomad.
* don't timestamp active log file
* website: update log_file default value
* changelog: add entry for #11070
* website: add upgrade instructions for log_file in v1.14 and v1.2.0
In Nomad 1.1.1 we generate a hosts file based on the Nomad-owned network
namespace, rather than using the default hosts file from the pause
container. This hosts file should be shared between tasks in the same
allocation so that tasks can update the file and have the results propagated
between tasks.
The `docker` driver's `port_map` field was deprecated in 0.12 and this is
documented in the task driver's docs, but we never explicitly flagged it for
backwards compatibility.
Update docs for allow_caps, cap_add, cap_drop in exec/java/docker driver
pages. Also update upgrade guide with guidance on new default linux
capabilities for exec and java drivers.
The default Linux Capabilities set enabled by the docker, exec, and
java task drivers includes CAP_NET_RAW (for making ping just work),
which has the side affect of opening an ARP DoS/MiTM attack between
tasks using bridge networking on the same host network.
https://docs.docker.com/engine/reference/run/#runtime-privilege-and-linux-capabilities
This PR disables CAP_NET_RAW for the docker, exec, and java task
drivers. The previous behavior can be restored for docker using the
allow_caps docker plugin configuration option.
A future version of nomad will enable similar configurability for the
exec and java task drivers.
