The `Job.Deregister` call will block on the client CSI controller RPCs
while the alloc still exists on the Nomad client node. So we need to
make the volume claim reaping async from the `Job.Deregister`. This
allows `nomad job stop` to return immediately. In order to make this
work, this changeset changes the volume GC so that the GC jobs are on a
by-volume basis rather than a by-job basis; we won't have to query
the (possibly deleted) job at the time of volume GC. We smuggle the
volume ID and whether it's a purge into the GC eval ID the same way we
smuggled the job ID previously.
The CSI plugins uses the external volume ID for all operations, but
the Client CSI RPCs uses the Nomad volume ID (human-friendly) for the
mount paths. Pass the External ID as an arg in the RPC call so that
the unpublish workflows have it without calling back to the server to
find the external ID.
The controller CSI plugins need the CSI node ID (or in other words,
the storage provider's view of node ID like the EC2 instance ID), not
the Nomad node ID, to determine how to detach the external volume.
* nomad/state/state_store: error message copy/paste error
* nomad/structs/structs: add a VolumeEval to the JobDeregisterResponse
* nomad/job_endpoint: synchronously, volumeClaimReap on job Deregister
* nomad/core_sched: make volumeClaimReap available without a CoreSched
* nomad/job_endpoint: Deregister return early if the job is missing
* nomad/job_endpoint_test: job Deregistion is idempotent
* nomad/core_sched: conditionally ignore alloc status in volumeClaimReap
* nomad/job_endpoint: volumeClaimReap all allocations, even running
* nomad/core_sched_test: extra argument to collectClaimsToGCImpl
* nomad/job_endpoint: job deregistration is not idempotent
I hypothesize that the flakiness in rolling update is due to shutting
down s3 server before s4 is properly added as a voter.
The chain of the flakiness is as follows:
1. Bootstrap with s1, s2, s3
2. Add s4
3. Wait for servers to register with 3 voting peers
* But we already have 3 voters (s1, s2, and s3)
* s4 is added as a non-voter in Raft v3 and must wait until autopilot promots it
4. Test proceeds without s4 being a voter
5. s3 shutdown
6. cluster changes stall due to leader election and too many pending configuration
changes (e.g. removing s3 from raft, promoting s4).
Here, I have the test wait until s4 is marked as a voter before shutting
down s3, so we don't have too many configuration changes at once.
In https://circleci.com/gh/hashicorp/nomad/57092, I noticed the
following events:
```
TestAutopilot_RollingUpdate: autopilot_test.go:204: adding server s4
TestAutopilot_RollingUpdate: testlog.go:34: 2020-04-03T20:08:19.789Z [INFO] nomad/serf.go:60: nomad: adding server: server="nomad-137.global (Addr: 127.0.0.1:9177) (DC: dc1)"
TestAutopilot_RollingUpdate: testlog.go:34: 2020-04-03T20:08:19.789Z [INFO] raft/raft.go:1018: nomad.raft: updating configuration: command=AddNonvoter server-id=c54b5bf4-1159-34f6-032d-56aefeb08425 server-addr=127.0.0.1:9177 servers="[{Suffrage:Voter ID:df01ba65-d1b2-17a9-f792-a4459b3a7c09 Address:127.0.0.1:9171} {Suffrage:Voter ID:c3337778-811e-2675-87f5-006309888387 Address:127.0.0.1:9173} {Suffrage:Voter ID:186d5e15-c473-e2b3-b5a4-3259a84e10ef Address:127.0.0.1:9169} {Suffrage:Nonvoter ID:c54b5bf4-1159-34f6-032d-56aefeb08425 Address:127.0.0.1:9177}]"
TestAutopilot_RollingUpdate: autopilot_test.go:218: shutting down server s3
TestAutopilot_RollingUpdate: testlog.go:34: 2020-04-03T20:08:19.797Z [INFO] raft/replication.go:456: nomad.raft: aborting pipeline replication: peer="{Nonvoter c54b5bf4-1159-34f6-032d-56aefeb08425 127.0.0.1:9177}"
TestAutopilot_RollingUpdate: autopilot_test.go:235: waiting for s4 to stabalize and be promoted
TestAutopilot_RollingUpdate: testlog.go:34: 2020-04-03T20:08:19.975Z [ERROR] raft/raft.go:1656: nomad.raft: failed to make requestVote RPC: target="{Voter c3337778-811e-2675-87f5-006309888387 127.0.0.1:9173}" error="dial tcp 127.0.0.1:9173: connect: connection refused"
TestAutopilot_RollingUpdate: retry.go:121: autopilot_test.go:241: don't want "c3337778-811e-2675-87f5-006309888387"
autopilot_test.go:241: didn't find map[c54b5bf4-1159-34f6-032d-56aefeb08425:true] in []raft.ServerID{"df01ba65-d1b2-17a9-f792-a4459b3a7c09", "186d5e15-c473-e2b3-b5a4-3259a84e10ef"}
```
Note how s3, c3337778, is present in the peers list in the final
failure, but s4, c54b5bf4, is added as a Nonvoter and isn't present in
the final peers list.
If a volume-claiming alloc stops and the CSI Node plugin that serves
that alloc's volumes is missing, there's no way for the allocrunner
hook to send the `NodeUnpublish` and `NodeUnstage` RPCs.
This changeset addresses this issue with a redesign of the client-side
for CSI. Rather than unmounting in the alloc runner hook, the alloc
runner hook will simply exit. When the server gets the
`Node.UpdateAlloc` for the terminal allocation that had a volume claim,
it creates a volume claim GC job. This job will made client RPCs to a
new node plugin RPC endpoint, and only once that succeeds, move on to
making the client RPCs to the controller plugin. If the node plugin is
unavailable, the GC job will fail and be requeued.
* nomad/state/state_store: enforce that the volume namespace exists
* nomad/csi_endpoint_test: a couple of broken namespaces now
* nomad/csi_endpoint_test: one more test
* nomad/node_endpoint_test: use structs.DefaultNamespace
* nomad/state/state_store_test: use DefaultNamespace
Part of #6120
Building on the support for enabling connect proxy paths in #7323, this change
adds the ability to configure the 'service.check.expose' flag on group-level
service check definitions for services that are connect-enabled. This is a slight
deviation from the "magic" that Consul provides. With Consul, the 'expose' flag
exists on the connect.proxy stanza, which will then auto-generate expose paths
for every HTTP and gRPC service check associated with that connect-enabled
service.
A first attempt at providing similar magic for Nomad's Consul Connect integration
followed that pattern exactly, as seen in #7396. However, on reviewing the PR
we realized having the `expose` flag on the proxy stanza inseperably ties together
the automatic path generation with every HTTP/gRPC defined on the service. This
makes sense in Consul's context, because a service definition is reasonably
associated with a single "task". With Nomad's group level service definitions
however, there is a reasonable expectation that a service definition is more
abstractly representative of multiple services within the task group. In this
case, one would want to define checks of that service which concretely make HTTP
or gRPC requests to different underlying tasks. Such a model is not possible
with the course `proxy.expose` flag.
Instead, we now have the flag made available within the check definitions themselves.
By making the expose feature resolute to each check, it is possible to have
some HTTP/gRPC checks which make use of the envoy exposed paths, as well as
some HTTP/gRPC checks which make use of some orthongonal port-mapping to do
checks on some other task (or even some other bound port of the same task)
within the task group.
Given this example,
group "server-group" {
network {
mode = "bridge"
port "forchecks" {
to = -1
}
}
service {
name = "myserver"
port = 2000
connect {
sidecar_service {
}
}
check {
name = "mycheck-myserver"
type = "http"
port = "forchecks"
interval = "3s"
timeout = "2s"
method = "GET"
path = "/classic/responder/health"
expose = true
}
}
}
Nomad will automatically inject (via job endpoint mutator) the
extrapolated expose path configuration, i.e.
expose {
path {
path = "/classic/responder/health"
protocol = "http"
local_path_port = 2000
listener_port = "forchecks"
}
}
Documentation is coming in #7440 (needs updating, doing next)
Modifications to the `countdash` examples in https://github.com/hashicorp/demo-consul-101/pull/6
which will make the examples in the documentation actually runnable.
Will add some e2e tests based on the above when it becomes available.
Enable configuration of HTTP and gRPC endpoints which should be exposed by
the Connect sidecar proxy. This changeset is the first "non-magical" pass
that lays the groundwork for enabling Consul service checks for tasks
running in a network namespace because they are Connect-enabled. The changes
here provide for full configuration of the
connect {
sidecar_service {
proxy {
expose {
paths = [{
path = <exposed endpoint>
protocol = <http or grpc>
local_path_port = <local endpoint port>
listener_port = <inbound mesh port>
}, ... ]
}
}
}
stanza. Everything from `expose` and below is new, and partially implements
the precedent set by Consul:
https://www.consul.io/docs/connect/registration/service-registration.html#expose-paths-configuration-reference
Combined with a task-group level network port-mapping in the form:
port "exposeExample" { to = -1 }
it is now possible to "punch a hole" through the network namespace
to a specific HTTP or gRPC path, with the anticipated use case of creating
Consul checks on Connect enabled services.
A future PR may introduce more automagic behavior, where we can do things like
1) auto-fill the 'expose.path.local_path_port' with the default value of the
'service.port' value for task-group level connect-enabled services.
2) automatically generate a port-mapping
3) enable an 'expose.checks' flag which automatically creates exposed endpoints
for every compatible consul service check (http/grpc checks on connect
enabled services).
* nomad/structs/structs: new NodeEventSubsystemCSI
* client/client: pass triggerNodeEvent in the CSIConfig
* client/pluginmanager/csimanager/instance: add eventer to instanceManager
* client/pluginmanager/csimanager/manager: pass triggerNodeEvent
* client/pluginmanager/csimanager/volume: node event on [un]mount
* nomad/structs/structs: use storage, not CSI
* client/pluginmanager/csimanager/volume: use storage, not CSI
* client/pluginmanager/csimanager/volume_test: eventer
* client/pluginmanager/csimanager/volume: event on error
* client/pluginmanager/csimanager/volume_test: check event on error
* command/node_status: remove an extra space in event detail format
* client/pluginmanager/csimanager/volume: use snake_case for details
* client/pluginmanager/csimanager/volume_test: snake_case details
The `csi_plugins` and `csi_volumes` tables were missing support for
snapshot persist and restore. This means restoring a snapshot would
result in missing information for CSI.
In tests where the logger is a test logger, emitting a trace log in a
background thread while it's shutting down may trigger a panic. Thus
avoid logging Trace if err != nil. Note that we already log an error
when err isn't a trace.
This fixes cases where tests panic with a trace like:
```
panic: Log in goroutine after TestAllocGarbageCollector_MakeRoomFor_MaxAllocs has completed
goroutine 30 [running]:
testing.(*common).logDepth(0xc000aa9e60, 0xc000c4a000, 0xab, 0x3)
/usr/local/Cellar/go/1.14/libexec/src/testing/testing.go:680 +0x4d3
testing.(*common).log(...)
/usr/local/Cellar/go/1.14/libexec/src/testing/testing.go:662
testing.(*common).Logf(0xc000aa9e60, 0x690b941, 0x4, 0xc001366c00, 0x2, 0x2)
/usr/local/Cellar/go/1.14/libexec/src/testing/testing.go:701 +0x7e
github.com/hashicorp/nomad/helper/testlog.(*writer).Write(0xc000a82a60, 0xc0000b48c0, 0xab, 0x13f, 0x0, 0x0, 0x0)
/Users/notnoop/go/src/github.com/hashicorp/nomad/helper/testlog/testlog.go:34 +0x106
github.com/hashicorp/nomad/vendor/github.com/hashicorp/go-hclog.(*writer).Flush(0xc000a80900, 0xbf9870f000000001, 0x20a87556e, 0x8b12bc0)
/Users/notnoop/go/src/github.com/hashicorp/nomad/vendor/github.com/hashicorp/go-hclog/writer.go:29 +0x14f
github.com/hashicorp/nomad/vendor/github.com/hashicorp/go-hclog.(*intLogger).log(0xc000e2c180, 0xc0003b6880, 0x17, 0x1, 0x6974edc, 0x22, 0xc000db57a0, 0x6, 0x6)
/Users/notnoop/go/src/github.com/hashicorp/nomad/vendor/github.com/hashicorp/go-hclog/intlogger.go:139 +0x15d
github.com/hashicorp/nomad/vendor/github.com/hashicorp/go-hclog.(*intLogger).Trace(0xc000e2c180, 0x6974edc, 0x22, 0xc000db57a0, 0x6, 0x6)
/Users/notnoop/go/src/github.com/hashicorp/nomad/vendor/github.com/hashicorp/go-hclog/intlogger.go:446 +0x7a
github.com/hashicorp/nomad/vendor/github.com/hashicorp/go-hclog.(*interceptLogger).Trace(0xc0002f1ad0, 0x6974edc, 0x22, 0xc000db57a0, 0x6, 0x6)
/Users/notnoop/go/src/github.com/hashicorp/nomad/vendor/github.com/hashicorp/go-hclog/interceptlogger.go:48 +0x9c
github.com/hashicorp/nomad/nomad/drainer.(*drainingJobWatcher).watch(0xc0002f2380)
/Users/notnoop/go/src/github.com/hashicorp/nomad/nomad/drainer/watch_jobs.go:147 +0x1125
created by github.com/hashicorp/nomad/nomad/drainer.NewDrainingJobWatcher
/Users/notnoop/go/src/github.com/hashicorp/nomad/nomad/drainer/watch_jobs.go:89 +0x1e3
FAIL github.com/hashicorp/nomad/client 10.605s
FAIL
```
* added method to retrieve all scaling policies for use in snapshotting, plus test
* better testing for ScalingPoliciesByNamespace
* added scaling policy snapshot persist and restore (and test of restore)
manually tested snapshot restore.
resolves#7539
* nomad/structs/csi: delete just one plugin type from a node
* nomad/structs/csi: add DeleteAlloc
* nomad/state/state_store: add deleteJobFromPlugin
* nomad/state/state_store: use DeleteAlloc not DeleteNodeType
* move CreateTestCSIPlugin to state to avoid an import cycle
* nomad/state/state_store_test: delete a plugin by deleting its jobs
* nomad/*_test: move CreateTestCSIPlugin to state
* nomad/state/state_store: update one plugin per transaction
* command/plugin_status_test: move CreateTestCSIPlugin
* nomad: csi: handle nils CSIPlugin methods, clarity
If not in use and not changing external ids, it should not be an error to register a volume again.
* nomad/state/state_store: make volume registration idempotent
TestStateStore_Indexes specifically tests for `nodes` index, but asserts
on the exact number of indexes present in the state. This is fragile
and will break almost everytime we add a state index.
Plugins track the client nodes where they are placed. On client
updates, remove the client from the plugin tracking if the client is
no longer running an instance of that controller/node plugin.
Extends the state store tests to ensure deregistration works as
expected and that controllers and nodes are being tracked
independently.
- tg.Count defaults to tg.Scaling.Min if present (falls back on previous default of 1 if Scaling is absent)
- Validate() enforces tg.Scaling.Min <= tg.Count <= tg.Scaling.Max
modification in ApiScalingPolicyToStructs, api.TaskGroup.Validate so that defaults are handled for TaskGroup.Count and
* nomad/structs/csi: split CanWrite into health, in use
* scheduler/scheduler: expose AllocByID in the state interface
* nomad/state/state_store_test
* scheduler/stack: SetJobID on the matcher
* scheduler/feasible: when a volume writer is in use, check if it's us
* scheduler/feasible: remove SetJob
* nomad/state/state_store: denormalize allocs before Claim
* nomad/structs/csi: return errors on claim, with context
* nomad/csi_endpoint_test: new alloc doesn't look like an update
* nomad/state/state_store_test: change test reference to CanWrite
Add mount_options to both the volume definition on registration and to the volume block in the group where the volume is requested. If both are specified, the options provided in the request replace the options defined in the volume. They get passed to the NodePublishVolume, which causes the node plugin to actually mount the volume on the host.
Individual tasks just mount bind into the host mounted volume (unchanged behavior). An operator can mount the same volume with different options by specifying it twice in the group context.
closes#7007
* nomad/structs/volumes: add MountOptions to volume request
* jobspec/test-fixtures/basic.hcl: add mount_options to volume block
* jobspec/parse_test: add expected MountOptions
* api/tasks: add mount_options
* jobspec/parse_group: use hcl decode not mapstructure, mount_options
* client/allocrunner/csi_hook: pass MountOptions through
client/allocrunner/csi_hook: add a VolumeMountOptions
client/allocrunner/csi_hook: drop Options
client/allocrunner/csi_hook: use the structs options
* client/pluginmanager/csimanager/interface: UsageOptions.MountOptions
* client/pluginmanager/csimanager/volume: pass MountOptions in capabilities
* plugins/csi/plugin: remove todo 7007 comment
* nomad/structs/csi: MountOptions
* api/csi: add options to the api for parsing, match structs
* plugins/csi/plugin: move VolumeMountOptions to structs
* api/csi: use specific type for mount_options
* client/allocrunner/csi_hook: merge MountOptions here
* rename CSIOptions to CSIMountOptions
* client/allocrunner/csi_hook
* client/pluginmanager/csimanager/volume
* nomad/structs/csi
* plugins/csi/fake/client: add PrevVolumeCapability
* plugins/csi/plugin
* client/pluginmanager/csimanager/volume_test: remove debugging
* client/pluginmanager/csimanager/volume: fix odd merging logic
* api: rename CSIOptions -> CSIMountOptions
* nomad/csi_endpoint: remove a 7007 comment
* command/alloc_status: show mount options in the volume list
* nomad/structs/csi: include MountOptions in the volume stub
* api/csi: add MountOptions to stub
* command/volume_status_csi: clean up csiVolMountOption, add it
* command/alloc_status: csiVolMountOption lives in volume_csi_status
* command/node_status: display mount flags
* nomad/structs/volumes: npe
* plugins/csi/plugin: npe in ToCSIRepresentation
* jobspec/parse_test: expand volume parse test cases
* command/agent/job_endpoint: ApiTgToStructsTG needs MountOptions
* command/volume_status_csi: copy paste error
* jobspec/test-fixtures/basic: hclfmt
* command/volume_status_csi: clean up csiVolMountOption
* acl/policy: add the volume ACL policies
* nomad/csi_endpoint: enforce ACLs for volume access
* nomad/search_endpoint_oss: volume acls
* acl/acl: add plugin read as a global policy
* acl/policy: add PluginPolicy global cap type
* nomad/csi_endpoint: check the global plugin ACL policy
* nomad/mock/acl: PluginPolicy
* nomad/csi_endpoint: fix list rebase
* nomad/core_sched_test: new test since #7358
* nomad/csi_endpoint_test: use correct permissions for list
* nomad/csi_endpoint: allowCSIMount keeps ACL checks together
* nomad/job_endpoint: check mount permission for jobs
* nomad/job_endpoint_test: need plugin read, too
* nomad/state/schema: use the namespace compound index
* scheduler/scheduler: CSIVolumeByID interface signature namespace
* scheduler/stack: SetJob on CSIVolumeChecker to capture namespace
* scheduler/feasible: pass the captured namespace to CSIVolumeByID
* nomad/state/state_store: use namespace in csi_volume index
* nomad/fsm: pass namespace to CSIVolumeDeregister & Claim
* nomad/core_sched: pass the namespace in volumeClaimReap
* nomad/node_endpoint_test: namespaces in Claim testing
* nomad/csi_endpoint: pass RequestNamespace to state.*
* nomad/csi_endpoint_test: appropriately failed test
* command/alloc_status_test: appropriately failed test
* node_endpoint_test: avoid notTheNamespace for the job
* scheduler/feasible_test: call SetJob to capture the namespace
* nomad/csi_endpoint: ACL check the req namespace, query by namespace
* nomad/state/state_store: remove deregister namespace check
* nomad/state/state_store: remove unused CSIVolumes
* scheduler/feasible: CSIVolumeChecker SetJob -> SetNamespace
* nomad/csi_endpoint: ACL check
* nomad/state/state_store_test: remove call to state.CSIVolumes
* nomad/core_sched_test: job namespace match so claim gc works
This changeset implements the remaining controller detach RPCs: server-to-client and client-to-controller. The tests also uncovered a bug in our RPC for claims which is fixed here; the volume claim RPC is used for both claiming and releasing a claim on a volume. We should only submit a controller publish RPC when the claim is new and not when it's being released.
Nomad clients will push node updates during client restart which can
cause an extra claim for a volume by the same alloc. If an alloc
already claims a volume, we can allow it to be treated as a valid
claim and continue.
* nomad/structs/csi: new RemoteID() uses the ExternalID if set
* nomad/csi_endpoint: pass RemoteID to volume request types
* client/pluginmanager/csimanager/volume: pass RemoteID to NodePublishVolume
* api/allocations: GetTaskGroup finds the taskgroup struct
* command/node_status: display CSI volume names
* nomad/state/state_store: new CSIVolumesByNodeID
* nomad/state/iterator: new SliceIterator type implements memdb.ResultIterator
* nomad/csi_endpoint: deal with a slice of volumes
* nomad/state/state_store: CSIVolumesByNodeID return a SliceIterator
* nomad/structs/csi: CSIVolumeListRequest takes a NodeID
* nomad/csi_endpoint: use the return iterator
* command/agent/csi_endpoint: parse query params for CSIVolumes.List
* api/nodes: new CSIVolumes to list volumes by node
* command/node_status: use the new list endpoint to print volumes
* nomad/state/state_store: error messages consider the operator
* command/node_status: include the Provider
* client/allocrunner/csi_hook: tag errors
* nomad/client_csi_endpoint: tag errors
* nomad/client_rpc: remove an unnecessary error tag
* nomad/state/state_store: ControllerRequired fix intent
We use ControllerRequired to indicate that a volume should use the
publish/unpublish workflow, rather than that it has a controller. We
need to check both RequiresControllerPlugin and SupportsAttachDetach
from the fingerprint to check that.
* nomad/csi_endpoint: tag errors
* nomad/csi_endpoint_test: longer error messages, mock fingerprints
We denormalize the `CSIVolume` struct when we query it from the state
store by getting the plugin and its health. But unless we copy the
volume, this denormalization gets synced back to the state store
without passing through the fsm (which is invalid).
We denormalize the `CSIPlugin` struct when we query it from the state
store by getting the current set of allocations that provide the
plugin. But unless we copy the plugin, this denormalization gets
synced back to the state store and each time we query we'll add
another copy of the current allocations.
Derive a provider name and version for plugins (and the volumes that
use them) from the CSI identity API `GetPluginInfo`. Expose the vendor
name as `Provider` in the API and CLI commands.
* command/csi: csi, csi_plugin, csi_volume
* helper/funcs: move ExtraKeys from parse_config to UnusedKeys
* command/agent/config_parse: use helper.UnusedKeys
* api/csi: annotate CSIVolumes with hcl fields
* command/csi_plugin: add Synopsis
* command/csi_volume_register: use hcl.Decode style parsing
* command/csi_volume_list
* command/csi_volume_status: list format, cleanup
* command/csi_plugin_list
* command/csi_plugin_status
* command/csi_volume_deregister
* command/csi_volume: add Synopsis
* api/contexts/contexts: add csi search contexts to the constants
* command/commands: register csi commands
* api/csi: fix struct tag for linter
* command/csi_plugin_list: unused struct vars
* command/csi_plugin_status: unused struct vars
* command/csi_volume_list: unused struct vars
* api/csi: add allocs to CSIPlugin
* command/csi_plugin_status: format the allocs
* api/allocations: copy Allocation.Stub in from structs
* nomad/client_rpc: add some error context with Errorf
* api/csi: collapse read & write alloc maps to a stub list
* command/csi_volume_status: cleanup allocation display
* command/csi_volume_list: use Schedulable instead of Healthy
* command/csi_volume_status: use Schedulable instead of Healthy
* command/csi_volume_list: sprintf string
* command/csi: delete csi.go, csi_plugin.go
* command/plugin: refactor csi components to sub-command plugin status
* command/plugin: remove csi
* command/plugin_status: remove csi
* command/volume: remove csi
* command/volume_status: split out csi specific
* helper/funcs: add RemoveEqualFold
* command/agent/config_parse: use helper.RemoveEqualFold
* api/csi: do ,unusedKeys right
* command/volume: refactor csi components to `nomad volume`
* command/volume_register: split out csi specific
* command/commands: use the new top level commands
* command/volume_deregister: hardwired type csi for now
* command/volume_status: csiFormatVolumes rescued from volume_list
* command/plugin_status: avoid a panic on no args
* command/volume_status: avoid a panic on no args
* command/plugin_status: predictVolumeType
* command/volume_status: predictVolumeType
* nomad/csi_endpoint_test: move CreateTestPlugin to testing
* command/plugin_status_test: use CreateTestCSIPlugin
* nomad/structs/structs: add CSIPlugins and CSIVolumes search consts
* nomad/state/state_store: add CSIPlugins and CSIVolumesByIDPrefix
* nomad/search_endpoint: add CSIPlugins and CSIVolumes
* command/plugin_status: move the header to the csi specific
* command/volume_status: move the header to the csi specific
* nomad/state/state_store: CSIPluginByID prefix
* command/status: rename the search context to just Plugins/Volumes
* command/plugin,volume_status: test return ids now
* command/status: rename the search context to just Plugins/Volumes
* command/plugin_status: support -json and -t
* command/volume_status: support -json and -t
* command/plugin_status_csi: comments
* command/*_status: clean up text
* api/csi: fix stale comments
* command/volume: make deregister sound less fearsome
* command/plugin_status: set the id length
* command/plugin_status_csi: more compact plugin health
* command/volume: better error message, comment
In #7252 we removed the `DevDisableBootstrap` flag to require tests to
honor only `BootstrapExpect`, in order to reduce a source of test
flakiness. This changeset applies the same fix to the CSI tests.
* structs: add ControllerRequired, volume.Name, no plug.Type
* structs: Healthy -> Schedulable
* state_store: Healthy -> Schedulable
* api: add ControllerRequired to api data types
* api: copy csi structs changes
* nomad/structs/csi: include name and external id
* api/csi: include Name and ExternalID
* nomad/structs/csi: comments for the 3 ids
* structs: CSIInfo include AllocID, CSIPlugins no Jobs
* state_store: eliminate plugin Jobs, delete an empty plugin
* nomad/structs/csi: detect empty plugins correctly
* client/allocrunner/taskrunner/plugin_supervisor_hook: option AllocID
* client/pluginmanager/csimanager/instance: allocID
* client/pluginmanager/csimanager/fingerprint: set AllocID
* client/node_updater: split controller and node plugins
* api/csi: remove Jobs
The CSI Plugin API will map plugins to allocations, which allows
plugins to be defined by jobs in many configurations. In particular,
multiple plugins can be defined in the same job, and multiple jobs can
be used to define a single plugin.
Because we now map the allocation context directly from the node, it's
no longer necessary to track the jobs associated with a plugin
directly.
* nomad/csi_endpoint_test: CreateTestPlugin & register via fingerprint
* client/dynamicplugins: lift AllocID into the struct from Options
* api/csi_test: remove Jobs test
* nomad/structs/csi: CSIPlugins has an array of allocs
* nomad/state/state_store: implement CSIPluginDenormalize
* nomad/state/state_store: CSIPluginDenormalize npe on missing alloc
* nomad/csi_endpoint_test: defer deleteNodes for clarity
* api/csi_test: disable this test awaiting mocks:
https://github.com/hashicorp/nomad/issues/7123
Currently the handling of CSINode RPCs does not correctly handle
forwarding RPCs to Nodes.
This commit fixes this by introducing a shim RPC
(nomad/client_csi_enpdoint) that will correctly forward the request to
the owning node, or submit the RPC to the client.
In the process it also cleans up handling a little bit by adding the
`CSIControllerQuery` embeded struct for required forwarding state.
The CSIControllerQuery embeding the requirement of a `PluginID` also
means we could move node targetting into the shim RPC if wanted in the
future.
When an alloc is marked terminal (and after node unstage/unpublish
have been called), the client syncs the terminal alloc state with the
server via `Node.UpdateAlloc RPC`.
For each job that has a terminal alloc, the `Node.UpdateAlloc` RPC
handler at the server will emit an eval for a new core job to garbage
collect CSI volume claims. When this eval is handled on the core
scheduler, it will call a `volumeReap` method to release the claims
for all terminal allocs on the job.
The volume reap will issue a `ControllerUnpublishVolume` RPC for any
node that has no alloc claiming the volume. Once this returns (or
is skipped), the volume reap will send a new `CSIVolume.Claim` RPC
that releases the volume claim for that allocation in the state store,
making it available for scheduling again.
This same `volumeReap` method will be called from the core job GC,
which gives us a second chance to reclaim volumes during GC if there
were controller RPC failures.
Currently, the client has to ship an entire allocation to the server as
part of performing a VolumeClaim, this has a few problems:
Firstly, it means the client is sending significantly more data than is
required (an allocation contains the entire contents of a Nomad job,
alongside other irrelevant state) which has a non-zero (de)serialization
cost.
Secondly, because the allocation was never re-fetched from the state
store, it means that we were potentially open to issues caused by stale
state on a misbehaving or malicious client.
The change removes both of those issues at the cost of a couple of more
state store lookups, but they should be relatively cheap.
We also now provide the CSIVolume in the response for a claim, so the
client can perform a Claim without first going ahead and fetching all of
the volumes.
This PR implements some intitial support for doing deeper validation of
a volume during its registration with the server. This allows us to
validate the capabilities before users attempt to use the volumes during
most cases, and also prevents registering volumes without first setting
up a plugin, which should help to catch typos and the like during
registration.
This does have the downside of requiring users to wait for (1) instance
of a plugin to be running in their cluster before they can register
volumes.
Nomad servers need to make requests to CSI controller plugins running
on a client for publish/unpublish. The RPC needs to look up the client
node based on the plugin, load balancing across controllers, and then
perform the required client RPC to that node (via server forwarding if
neccessary).
This commit refactors the ACL code for the CSI endpoint to support
environments that run without acls enabled (e.g developer environments)
and also provides an easy way to restrict which endpoints may be
accessed with a client's SecretID to limit the blast radius of a
malicious client on the state of the environment.
The `ControllerPublishVolumeResponse` CSI RPC includes the publish
context intended to be passed by the orchestrator as an opaque value
to the node plugins. This changeset adds it to our response to a
volume claim request to proxy the controller's response back to the
client node.
When an alloc is marked terminal, and after node unstage/unpublish
have been called, the client will sync the terminal alloc state with
the server via `Node.UpdateAlloc` RPC.
This changeset implements releasing the volume claim for each volume
associated with the terminal alloc. It doesn't yet implement the RPC
call we need to make to the `ControllerUnpublishVolume` CSI RPC.
When the client receives an allocation which includes a CSI volume,
the alloc runner will block its main `Run` loop. The alloc runner will
issue a `VolumeClaim` RPC to the Nomad servers. This changeset
implements the portions of the `VolumeClaim` RPC endpoint that have
not been previously completed.
* state_store: csi volumes/plugins store the index in the txn
* nomad: csi_endpoint_test require index checks need uint64()
* nomad: other tests using int 0 not uint64(0)
* structs: pass index into New, but not other struct methods
* state_store: csi plugin indexes, use new struct interface
* nomad: csi_endpoint_test check index/query meta (on explicit 0)
* structs: NewCSIVolume takes an index arg now
* scheduler/test: NewCSIVolume takes an index arg now
This changeset adds a new core job `CoreJobCSIVolumePublicationGC` to
the leader's loop for scheduling core job evals. Right now this is an
empty method body without even a config file stanza. Later changesets
will implement the logic of volume publication GC.
state_store: change claim counts
state_store: get volumes by all, by driver
state_store: process volume claims
state_store: csi volume register error on update
This changeset implements the initial registration and fingerprinting
of CSI Plugins as part of #5378. At a high level, it introduces the
following:
* A `csi_plugin` stanza as part of a Nomad task configuration, to
allow a task to expose that it is a plugin.
* A new task runner hook: `csi_plugin_supervisor`. This hook does two
things. When the `csi_plugin` stanza is detected, it will
automatically configure the plugin task to receive bidirectional
mounts to the CSI intermediary directory. At runtime, it will then
perform an initial heartbeat of the plugin and handle submitting it to
the new `dynamicplugins.Registry` for further use by the client, and
then run a lightweight heartbeat loop that will emit task events
when health changes.
* The `dynamicplugins.Registry` for handling plugins that run
as Nomad tasks, in contrast to the existing catalog that requires
`go-plugin` type plugins and to know the plugin configuration in
advance.
* The `csimanager` which fingerprints CSI plugins, in a similar way to
`drivermanager` and `devicemanager`. It currently only fingerprints
the NodeID from the plugin, and assumes that all plugins are
monolithic.
Missing features
* We do not use the live updates of the `dynamicplugin` registry in
the `csimanager` yet.
* We do not deregister the plugins from the client when they shutdown
yet, they just become indefinitely marked as unhealthy. This is
deliberate until we figure out how we should manage deploying new
versions of plugins/transitioning them.
allow oss to parse sink duration
clean up audit sink parsing
ent eventer config reload
fix typo
SetEnabled to eventer interface
client acl test
rm dead code
fix failing test
The test starts enough connections to hit the limit, then closes the
connection and immediately starts one expecting the new one to succeed.
We must wait until the server side recognizes the connection
closing and free up a limits slot. The current test attempts to achieve
that by waiting to get an error on conn.Read, however, this error is
returned from local client without waiting for server update.
As such, I change the logic so it retries on connection rejection but
force the first non-EOF failure to be a deadline error.
This fixes a bug where a forwarded node update request may be assumed
to be the actual direct client connection if the server just lost
leadership.
When a nomad non-leader server receives a Node.UpdateStatus request, it
forwards the RPC request to the leader, and holds on the request
Yamux connection in a cache to allow for server<->client forwarding.
When the leader handles the request, it must differentiate between a
forwarded connection vs the actual connection. This is done in
https://github.com/hashicorp/nomad/blob/v0.10.4/nomad/node_endpoint.go#L412
Now, consider if the non-leader server forwards to the connection to a
recently deposed nomad leader, which in turn forwards the RPC request to
the new leader.
Without this change, the deposed leader will mistake the forwarded
connection for the actual client connection and cache it mapped to the
client ID. If the server attempts to connect to that client, it will
attempt to start a connection/session to the other server instead and
the call will hang forever.
This change ensures that we only add node connection mapping if the
request is not a forwarded request, regardless of circumstances.
This deflake the tests in the deploymentwatcher package. The package
uses a mock deployment watcher backend, where the watcher in a
background goroutine calls UpdateDeploymentStatus . If the mock isn't
configured to expect the call, the background goroutine will fail. One
UpdateDeploymentStatus call is made at the end of the background
goroutine, which may occur after the test completes, thus explaining the
flakiness.
This change updates tests to honor `BootstrapExpect` exclusively when
forming test clusters and removes test only knobs, e.g.
`config.DevDisableBootstrap`.
Background:
Test cluster creation is fragile. Test servers don't follow the
BootstapExpected route like production clusters. Instead they start as
single node clusters and then get rejoin and may risk causing brain
split or other test flakiness.
The test framework expose few knobs to control those (e.g.
`config.DevDisableBootstrap` and `config.Bootstrap`) that control
whether a server should bootstrap the cluster. These flags are
confusing and it's unclear when to use: their usage in multi-node
cluster isn't properly documented. Furthermore, they have some bad
side-effects as they don't control Raft library: If
`config.DevDisableBootstrap` is true, the test server may not
immediately attempt to bootstrap a cluster, but after an election
timeout (~50ms), Raft may force a leadership election and win it (with
only one vote) and cause a split brain.
The knobs are also confusing as Bootstrap is an overloaded term. In
BootstrapExpect, we refer to bootstrapping the cluster only after N
servers are connected. But in tests and the knobs above, it refers to
whether the server is a single node cluster and shouldn't wait for any
other server.
Changes:
This commit makes two changes:
First, it relies on `BootstrapExpected` instead of `Bootstrap` and/or
`DevMode` flags. This change is relatively trivial.
Introduce a `Bootstrapped` flag to track if the cluster is bootstrapped.
This allows us to keep `BootstrapExpected` immutable. Previously, the
flag was a config value but it gets set to 0 after cluster bootstrap
completes.
Fix a bug where consul service definitions would not be updated if changes
were made to the service in the Nomad job. Currently this only fixes the
bug for cases where the fix is a matter of updating consul agent's service
registration. There is related bug where destructive changes are required
(see #6877) which will be fixed in another PR.
The enable_tag_override configuration setting for the parent service is
applied to the sidecar service.
Fixes#6459
Consul CLI uses CONSUL_HTTP_TOKEN, so Nomad should use the same.
Note that consul-template uses CONSUL_TOKEN, which Nomad also uses,
so be careful to preserve any reference to that in the consul-template
context.
Consul provides a feature of Service Definitions where the tags
associated with a service can be modified through the Catalog API,
overriding the value(s) configured in the agent's service configuration.
To enable this feature, the flag enable_tag_override must be configured
in the service definition.
Previously, Nomad did not allow configuring this flag, and thus the default
value of false was used. Now, it is configurable.
Because Nomad itself acts as a state machine around the the service definitions
of the tasks it manages, it's worth describing what happens when this feature
is enabled and why.
Consider the basic case where there is no Nomad, and your service is provided
to consul as a boring JSON file. The ultimate source of truth for the definition
of that service is the file, and is stored in the agent. Later, Consul performs
"anti-entropy" which synchronizes the Catalog (stored only the leaders). Then
with enable_tag_override=true, the tags field is available for "external"
modification through the Catalog API (rather than directly configuring the
service definition file, or using the Agent API). The important observation
is that if the service definition ever changes (i.e. the file is changed &
config reloaded OR the Agent API is used to modify the service), those
"external" tag values are thrown away, and the new service definition is
once again the source of truth.
In the Nomad case, Nomad itself is the source of truth over the Agent in
the same way the JSON file was the source of truth in the example above.
That means any time Nomad sets a new service definition, any externally
configured tags are going to be replaced. When does this happen? Only on
major lifecycle events, for example when a task is modified because of an
updated job spec from the 'nomad job run <existing>' command. Otherwise,
Nomad's periodic re-sync's with Consul will now no longer try to restore
the externally modified tag values (as long as enable_tag_override=true).
Fixes#2057
The default RPC addr was a global which is fine for normal runtime use
when it only has a single user.
However many tests modify it and cause races. Follow our convention of
returning defaults from funcs instead of using globals.
MultiplexV2 is a new connection multiplex header that supports multiplex both
RPC and streaming requests over the same Yamux connection.
MultiplexV2 was added in 0.8.0 as part of
https://github.com/hashicorp/nomad/pull/3892 . So Nomad 0.11 can expect it to
be supported. Though, some more rigorous testing is required before merging
this.
I want to call out some implementation details:
First, the current connection pool reuses the Yamux stream for multiple RPC calls,
and doesn't close them until an error is encountered. This commit doesn't
change it, and sets the `RpcNomad` byte only at stream creation.
Second, the StreamingRPC session gets closed by callers and cannot be reused.
Every StreamingRPC opens a new Yamux session.
This is from a merge conflict resolution that went the wrong direction.
I assumed the block had been added, but really it had been removed. Now,
it is removed once again.
Apply smaller suggestions like doc strings, variable names, etc.
Co-Authored-By: Nick Ethier <nethier@hashicorp.com>
Co-Authored-By: Michael Schurter <mschurter@hashicorp.com>
Nomad jobs may be configured with a TaskGroup which contains a Service
definition that is Consul Connect enabled. These service definitions end
up establishing a Consul Connect Proxy Task (e.g. envoy, by default). In
the case where Consul ACLs are enabled, a Service Identity token is required
for these tasks to run & connect, etc. This changeset enables the Nomad Server
to recieve RPC requests for the derivation of SI tokens on behalf of instances
of Consul Connect using Tasks. Those tokens are then relayed back to the
requesting Client, which then injects the tokens in the secrets directory of
the Task.
When a job is configured with Consul Connect aware tasks (i.e. sidecar),
the Nomad Client should be able to request from Consul (through Nomad Server)
Service Identity tokens specific to those tasks.
Enable any Server to lookup the unique ClusterID. If one has not been
generated, and this node is the leader, generate a UUID and attempt to
apply it through raft.
The value is not yet used anywhere in this changeset, but is a prerequisite
for gh-6701.
This change provides an initial pass at setting up the configuration necessary to
enable use of Connect with Consul ACLs. Operators will be able to pass in a Consul
Token through `-consul-token` or `$CONSUL_TOKEN` in the `job run` and `job revert`
commands (similar to Vault tokens).
These values are not actually used yet in this changeset.
Introduce limits to prevent unauthorized users from exhausting all
ephemeral ports on agents:
* `{https,rpc}_handshake_timeout`
* `{http,rpc}_max_conns_per_client`
The handshake timeout closes connections that have not completed the TLS
handshake by the deadline (5s by default). For RPC connections this
timeout also separately applies to first byte being read so RPC
connections with TLS enabled have `rpc_handshake_time * 2` as their
deadline.
The connection limit per client prevents a single remote TCP peer from
exhausting all ephemeral ports. The default is 100, but can be lowered
to a minimum of 26. Since streaming RPC connections create a new TCP
connection (until MultiplexV2 is used), 20 connections are reserved for
Raft and non-streaming RPCs to prevent connection exhaustion due to
streaming RPCs.
All limits are configurable and may be disabled by setting them to `0`.
This also includes a fix that closes connections that attempt to create
TLS RPC connections recursively. While only users with valid mTLS
certificates could perform such an operation, it was added as a
safeguard to prevent programming errors before they could cause resource
exhaustion.
Allows addressing servers with nomad monitor using the servers name or
ID.
Also unifies logic for addressing servers for client_agent_endpoint
commands and makes addressing logic region aware.
rpc getServer test
Fixes a deadlock in leadership handling if leadership flapped.
Raft propagates leadership transition to Nomad through a NotifyCh channel.
Raft blocks when writing to this channel, so channel must be buffered or
aggressively consumed[1]. Otherwise, Raft blocks indefinitely in `raft.runLeader`
until the channel is consumed[1] and does not move on to executing follower
related logic (in `raft.runFollower`).
While Raft `runLeader` defer function blocks, raft cannot process any other
raft operations. For example, `run{Leader|Follower}` methods consume
`raft.applyCh`, and while runLeader defer is blocked, all raft log applications
or config lookup will block indefinitely.
Sadly, `leaderLoop` and `establishLeader` makes few Raft calls!
`establishLeader` attempts to auto-create autopilot/scheduler config [3]; and
`leaderLoop` attempts to check raft configuration [4]. All of these calls occur
without a timeout.
Thus, if leadership flapped quickly while `leaderLoop/establishLeadership` is
invoked and hit any of these Raft calls, Raft handler _deadlock_ forever.
Depending on how many times it flapped and where exactly we get stuck, I suspect
it's possible to get in the following case:
* Agent metrics/stats http and RPC calls hang as they check raft.Configurations
* raft.State remains in Leader state, and server attempts to handle RPC calls
(e.g. node/alloc updates) and these hang as well
As we create goroutines per RPC call, the number of goroutines grow over time
and may trigger a out of memory errors in addition to missed updates.
[1] d90d6d6bda/config.go (L190-L193)
[2] d90d6d6bda/raft.go (L425-L436)
[3] 2a89e47746/nomad/leader.go (L198-L202)
[4] 2a89e47746/nomad/leader.go (L877)
Passes in agent enable_debug config to nomad server and client configs.
This allows for rpc endpoints to have more granular control if they
should be enabled or not in combination with ACLs.
enable debug on client test
This commit ensures that Alloc.AllocatedResources is properly populated
when read from persistence stores (namely Raft and client state store).
The alloc struct may have been written previously by an arbitrary old
version that may only populate Alloc.TaskResources.
When parsing a config file which had the consul.timeout param set,
Nomad was reporting an error causing startup to fail. This seems
to be caused by the HCL decoder interpreting the timeout type as
an int rather than a string. This is caused by the struct
TimeoutHCL param having a hcl key of timeout alongside a Timeout
struct param of type time.Duration (int). Ensuring the decoder
ignores the Timeout struct param ensure the decoder runs
correctly.
copy struct values
ensure groupserviceHook implements RunnerPreKillhook
run deregister first
test that shutdown times are delayed
move magic number into variable
Avoid logging in the `watch` function as much as possible, since
it is not waited on during a server shutdown. When the logger
logs after a test passes, it may or may not cause the testing
framework to panic.
More info in:
https://github.com/golang/go/issues/29388#issuecomment-453648436
Fixes#6853
Canonicalize jobs first before adding any sidecars. This fixes a bug
where sidecar tasks were added without interpolated names and broke
validation. Sidecar tasks must be canonicalized independently.
Also adds a group network to the mock connect job because it wasn't a
valid connect job before!
It has been decided we're going to live in a many core world.
Let's take advantage of that and parallelize these state store
tests which all run in memory and are largely CPU bound.
An unscientific benchmark demonstrating the improvement:
[mp state (master)] $ go test
PASS
ok github.com/hashicorp/nomad/nomad/state 5.162s
[mp state (f-parallelize-state-store-tests)] $ go test
PASS
ok github.com/hashicorp/nomad/nomad/state 1.527s
Copy the updated version of freeport (sdk/freeport), and tweak it for use
in Nomad tests. This means staying below port 10000 to avoid conflicts with
the lib/freeport that is still transitively used by the old version of
consul that we vendor. Also provide implementations to find ephemeral ports
of macOS and Windows environments.
Ports acquired through freeport are supposed to be returned to freeport,
which this change now also introduces. Many tests are modified to include
calls to a cleanup function for Server objects.
This should help quite a bit with some flakey tests, but not all of them.
Our port problems will not go away completely until we upgrade our vendor
version of consul. With Go modules, we'll probably do a 'replace' to swap
out other copies of freeport with the one now in 'nomad/helper/freeport'.
If ACL Request is unauthenticated, we should honor the anonymous token.
This PR makes few changes:
* `GetPolicy` endpoints may return policy if anonymous policy allows it,
or return permission denied otherwise.
* `ListPolicies` returns an empty policy list, or one with anonymous
policy if one exists.
Without this PR, the we return an incomprehensible error.
Before:
```
$ curl http://localhost:4646/v1/acl/policy/doesntexist; echo
acl token lookup failed: index error: UUID must be 36 characters
$ curl http://localhost:4646/v1/acl/policies; echo
acl token lookup failed: index error: UUID must be 36 characters
```
After:
```
$ curl http://localhost:4646/v1/acl/policy/doesntexist; echo
Permission denied
$ curl http://localhost:4646/v1/acl/policies; echo
[]
```
Noticed that ACL endpoints return 500 status code for user errors. This
is confusing and can lead to false monitoring alerts.
Here, I introduce a concept of RPCCoded errors to be returned by RPC
that signal a code in addition to error message. Codes for now match
HTTP codes to ease reasoning.
```
$ nomad acl bootstrap
Error bootstrapping: Unexpected response code: 500 (ACL bootstrap already done (reset index: 9))
$ nomad acl bootstrap
Error bootstrapping: Unexpected response code: 400 (ACL bootstrap already done (reset index: 9))
```
The existing version constraint uses logic optimized for package
managers, not schedulers, when checking prereleases:
- 1.3.0-beta1 will *not* satisfy ">= 0.6.1"
- 1.7.0-rc1 will *not* satisfy ">= 1.6.0-beta1"
This is due to package managers wishing to favor final releases over
prereleases.
In a scheduler versions more often represent the earliest release all
required features/APIs are available in a system. Whether the constraint
or the version being evaluated are prereleases has no impact on
ordering.
This commit adds a new constraint - `semver` - which will use Semver
v2.0 ordering when evaluating constraints. Given the above examples:
- 1.3.0-beta1 satisfies ">= 0.6.1" using `semver`
- 1.7.0-rc1 satisfies ">= 1.6.0-beta1" using `semver`
Since existing jobspecs may rely on the old behavior, a new constraint
was added and the implicit Consul Connect and Vault constraints were
updated to use it.
* client: improve group service stanza interpolation and check_restart support
Interpolation can now be done on group service stanzas. Note that some task runtime specific information
that was previously available when the service was registered poststart of a task is no longer available.
The check_restart stanza for checks defined on group services will now properly restart the allocation upon
check failures if configured.
handle the case where we request a server-id which is this current server
update docs, error on node and server id params
more accurate names for tests
use shared no leader err, formatting
rm bad comment
remove redundant variable
There's a bug in version parsing that breaks this constraint when using
a prerelease enterprise version of Vault (eg 1.3.0-beta1+ent). While
this does not fix the underlying bug it does provide a workaround for
future issues related to the implicit constraint. Like the implicit
Connect constraint: *all* implicit constraints should be overridable to
allow users to workaround bugs or other factors should the need arise.
Adds new package that can be used by client and server RPC endpoints to
facilitate monitoring based off of a logger
clean up old code
small comment about write
rm old comment about minsize
rename to Monitor
Removes connection logic from monitor command
Keep connection logic in endpoints, use a channel to send results from
monitoring
use new multisink logger and interfaces
small test for dropped messages
update go-hclogger and update sink/intercept logger interfaces
Fixes typo in word "failed".
Fixes bug where incorrect error is printed. The old code would only
ever print a nil error, instead of the validationErr which is being
created.
`admissionValidators` doesn't aggregate errors correctly, as it
aggregates errors in `errs` reference yet it always returns the nil
`err`.
Here, we avoid shadowing `err`, and move variable declarations to where
they are used.
`groupConnectHook` assumes that Networks is a non-empty slice, but TG
hasn't been validated yet and validation may depend on mutation results.
As such, we do basic check here before dereferencing network slice
elements.
Vault 1.2.0 deprecated `period` field in favor of `token_period` in auth
role:
> * Token store roles use new, common token fields for the values
> that overlap with other auth backends. `period`, `explicit_max_ttl`, and
> `bound_cidrs` will continue to work, with priority being given to the
> `token_` prefixed versions of those parameters. They will also be returned
> when doing a read on the role if they were used to provide values initially;
> however, in Vault 1.4 if `period` or `explicit_max_ttl` is zero they will no
> longer be returned. (`explicit_max_ttl` was already not returned if empty.)
https://github.com/hashicorp/vault/blob/master/CHANGELOG.md#120-july-30th-2019
This commit introduces support for configuring mount propagation when
mounting volumes with the `volume_mount` stanza on Linux targets.
Similar to Kubernetes, we expose 3 options for configuring mount
propagation:
- private, which is equivalent to `rprivate` on Linux, which does not allow the
container to see any new nested mounts after the chroot was created.
- host-to-task, which is equivalent to `rslave` on Linux, which allows new mounts
that have been created _outside of the container_ to be visible
inside the container after the chroot is created.
- bidirectional, which is equivalent to `rshared` on Linux, which allows both
the container to see new mounts created on the host, but
importantly _allows the container to create mounts that are
visible in other containers an don the host_
private and host-to-task are safe, but bidirectional mounts can be
dangerous, as if the code inside a container creates a mount, and does
not clean it up before tearing down the container, it can cause bad
things to happen inside the kernel.
To add a layer of safety here, we require that the user has ReadWrite
permissions on the volume before allowing bidirectional mounts, as a
defense in depth / validation case, although creating mounts should also require
a priviliged execution environment inside the container.
Fix a bug where a millicious user can access or manipulate an alloc in a
namespace they don't have access to. The allocation endpoints perform
ACL checks against the request namespace, not the allocation namespace,
and performs the allocation lookup independently from namespaces.
Here, we check that the requested can access the alloc namespace
regardless of the declared request namespace.
Ideally, we'd enforce that the declared request namespace matches
the actual allocation namespace. Unfortunately, we haven't documented
alloc endpoints as namespaced functions; we suspect starting to enforce
this will be very disruptive and inappropriate for a nomad point
release. As such, we maintain current behavior that doesn't require
passing the proper namespace in request. A future major release may
start enforcing checking declared namespace.
