This PR implements ACLAuthMethod type, acl_auth_methods table schema and crud state store methods. It also updates nomadSnapshot.Persist and nomadSnapshot.Restore methods in order for them to work with the new table, and adds two new Raft messages: ACLAuthMethodsUpsertRequestType and ACLAuthMethodsDeleteRequestType
This PR is part of the SSO work captured under ☂️ ticket #13120.
* scheduler: allow updates after alloc reconnects
When an allocation reconnects to a cluster the scheduler needs to run
special logic to handle the reconnection, check if a replacement was
create and stop one of them.
If the allocation kept running while the node was disconnected, it will
be reconnected with `ClientStatus: running` and the node will have
`Status: ready`. This combination is the same as the normal steady state
of allocation, where everything is running as expected.
In order to differentiate between the two states (an allocation that is
reconnecting and one that is just running) the scheduler needs an extra
piece of state.
The current implementation uses the presence of a
`TaskClientReconnected` task event to detect when the allocation has
reconnected and thus must go through the reconnection process. But this
event remains even after the allocation is reconnected, causing all
future evals to consider the allocation as still reconnecting.
This commit changes the reconnect logic to use an `AllocState` to
register when the allocation was reconnected. This provides the
following benefits:
- Only a limited number of task states are kept, and they are used for
many other events. It's possible that, upon reconnecting, several
actions are triggered that could cause the `TaskClientReconnected`
event to be dropped.
- Task events are set by clients and so their timestamps are subject
to time skew from servers. This prevents using time to determine if
an allocation reconnected after a disconnect event.
- Disconnect events are already stored as `AllocState` and so storing
reconnects there as well makes it the only source of information
required.
With the new logic, the reconnection logic is only triggered if the
last `AllocState` is a disconnect event, meaning that the allocation has
not been reconnected yet. After the reconnection is handled, the new
`ClientStatus` is store in `AllocState` allowing future evals to skip
the reconnection logic.
* scheduler: prevent spurious placement on reconnect
When a client reconnects it makes two independent RPC calls:
- `Node.UpdateStatus` to heartbeat and set its status as `ready`.
- `Node.UpdateAlloc` to update the status of its allocations.
These two calls can happen in any order, and in case the allocations are
updated before a heartbeat it causes the state to be the same as a node
being disconnected: the node status will still be `disconnected` while
the allocation `ClientStatus` is set to `running`.
The current implementation did not handle this order of events properly,
and the scheduler would create an unnecessary placement since it
considered the allocation was being disconnected. This extra allocation
would then be quickly stopped by the heartbeat eval.
This commit adds a new code path to handle this order of events. If the
node is `disconnected` and the allocation `ClientStatus` is `running`
the scheduler will check if the allocation is actually reconnecting
using its `AllocState` events.
* rpc: only allow alloc updates from `ready` nodes
Clients interact with servers using three main RPC methods:
- `Node.GetAllocs` reads allocation data from the server and writes it
to the client.
- `Node.UpdateAlloc` reads allocation from from the client and writes
them to the server.
- `Node.UpdateStatus` writes the client status to the server and is
used as the heartbeat mechanism.
These three methods are called periodically by the clients and are done
so independently from each other, meaning that there can't be any
assumptions in their ordering.
This can generate scenarios that are hard to reason about and to code
for. For example, when a client misses too many heartbeats it will be
considered `down` or `disconnected` and the allocations it was running
are set to `lost` or `unknown`.
When connectivity is restored the to rest of the cluster, the natural
mental model is to think that the client will heartbeat first and then
update its allocations status into the servers.
But since there's no inherit order in these calls the reverse is just as
possible: the client updates the alloc status and then heartbeats. This
results in a state where allocs are, for example, `running` while the
client is still `disconnected`.
This commit adds a new verification to the `Node.UpdateAlloc` method to
reject updates from nodes that are not `ready`, forcing clients to
heartbeat first. Since this check is done server-side there is no need
to coordinate operations client-side: they can continue sending these
requests independently and alloc update will succeed after the heartbeat
is done.
* chagelog: add entry for #15068
* code review
* client: skip terminal allocations on reconnect
When the client reconnects with the server it synchronizes the state of
its allocations by sending data using the `Node.UpdateAlloc` RPC and
fetching data using the `Node.GetClientAllocs` RPC.
If the data fetch happens before the data write, `unknown` allocations
will still be in this state and would trigger the
`allocRunner.Reconnect` flow.
But when the server `DesiredStatus` for the allocation is `stop` the
client should not reconnect the allocation.
* apply more code review changes
* scheduler: persist changes to reconnected allocs
Reconnected allocs have a new AllocState entry that must be persisted by
the plan applier.
* rpc: read node ID from allocs in UpdateAlloc
The AllocUpdateRequest struct is used in three disjoint use cases:
1. Stripped allocs from clients Node.UpdateAlloc RPC using the Allocs,
and WriteRequest fields
2. Raft log message using the Allocs, Evals, and WriteRequest fields
3. Plan updates using the AllocsStopped, AllocsUpdated, and Job fields
Adding a new field that would only be used in one these cases (1) made
things more confusing and error prone. While in theory an
AllocUpdateRequest could send allocations from different nodes, in
practice this never actually happens since only clients call this method
with their own allocations.
* scheduler: remove logic to handle exceptional case
This condition could only be hit if, somehow, the allocation status was
set to "running" while the client was "unknown". This was addressed by
enforcing an order in "Node.UpdateStatus" and "Node.UpdateAlloc" RPC
calls, so this scenario is not expected to happen.
Adding unnecessary code to the scheduler makes it harder to read and
reason about it.
* more code review
* remove another unused test
ACL tokens are granted permissions either by direct policy links
or via ACL role links. Callers should therefore be able to read
policies directly assigned to the caller token or indirectly by
ACL role links.
This PR removes the assertion around when the 'task' field of
a check may be set. Starting in Nomad 1.4 we automatically set
the task field on all checks in support of the NSD checks feature.
This is causing validation problems elsewhere, e.g. when a group
service using the Consul provider sets 'task' it will fail
validation that worked previously.
The assertion of leaving 'task' unset was only about making sure
job submitters weren't expecting some behavior, but in practice
is causing bugs now that we need the task field for more than it
was originally added for.
We can simply update the docs, noting when the task field set by
job submitters actually has value.
When a Nomad agent starts and loads jobs that already existed in the
cluster, the default template uid and gid was being set to 0, since this
is the zero value for int. This caused these jobs to fail in
environments where it was not possible to use 0, such as in Windows
clients.
In order to differentiate between an explicit 0 and a template where
these properties were not set we need to use a pointer.
The ACL token state schema has been updated to utilise two new
indexes which track expiration of tokens that are configured with
an expiration TTL or time. A new state function allows listing
ACL expired tokens which will be used by internal garbage
collection.
The ACL endpoint has been modified so that all validation happens
within a single function call. This is easier to understand and
see at a glance. The ACL token validation now also includes logic
for expiry TTL and times. The ACL endpoint upsert tests have been
condensed into a single, table driven test.
There is a new token canonicalize which provides a single place
for token canonicalization, rather than logic spread in the RPC
handler.
This PR adds support for specifying checks in services registered to
the built-in nomad service provider.
Currently only HTTP and TCP checks are supported, though more types
could be added later.
This PR fixes a bug where client configuration max_kill_timeout was
not being enforced. The feature was introduced in 9f44780 but seems
to have been removed during the major drivers refactoring.
We can make sure the value is enforced by pluming it through the DriverHandler,
which now uses the lesser of the task.killTimeout or client.maxKillTimeout.
Also updates Event.SetKillTimeout to require both the task.killTimeout and
client.maxKillTimeout so that we don't make the mistake of using the wrong
value - as it was being given only the task.killTimeout before.
After a more detailed analysis of this feature, the approach taken in
PR #12449 was found to be not ideal due to poor UX (users are
responsible for setting the entity alias they would like to use) and
issues around jobs potentially masquerading itself as another Vault
entity.
This PR introduces the `address` field in the `service` block so that Nomad
or Consul services can be registered with a custom `.Address.` to advertise.
The address can be an IP address or domain name. If the `address` field is
set, the `service.address_mode` must be set in `auto` mode.
Move some common Vault API data struct decoding out of the Vault client
so it can be reused in other situations.
Make Vault job validation its own function so it's easier to expand it.
Rename the `Job.VaultPolicies` method to just `Job.Vault` since it
returns the full Vault block, not just their policies.
Set `ChangeMode` on `Vault.Canonicalize`.
Add some missing tests.
Allows specifying an entity alias that will be used by Nomad when
deriving the task Vault token.
An entity alias assigns an indentity to a token, allowing better control
and management of Vault clients since all tokens with the same indentity
alias will now be considered the same client. This helps track Nomad
activity in Vault's audit logs and better control over Vault billing.
Add support for a new Nomad server configuration to define a default
entity alias to be used when deriving Vault tokens. This default value
will be used if the task doesn't have an entity alias defined.
This PR exposes the following existing`consul-template` configuration options to Nomad jobspec authors in the `{job.group.task.template}` stanza.
- `wait`
It also exposes the following`consul-template` configuration to Nomad operators in the `{client.template}` stanza.
- `max_stale`
- `block_query_wait`
- `consul_retry`
- `vault_retry`
- `wait`
Finally, it adds the following new Nomad-specific configuration to the `{client.template}` stanza that allows Operators to set bounds on what `jobspec` authors configure.
- `wait_bounds`
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
Add a new hostname string parameter to the network block which
allows operators to specify the hostname of the network namespace.
Changing this causes a destructive update to the allocation and it
is omitted if empty from API responses. This parameter also supports
interpolation.
In order to have a hostname passed as a configuration param when
creating an allocation network, the CreateNetwork func of the
DriverNetworkManager interface needs to be updated. In order to
minimize the disruption of future changes, rather than add another
string func arg, the function now accepts a request struct along with
the allocID param. The struct has the hostname as a field.
The in-tree implementations of DriverNetworkManager.CreateNetwork
have been modified to account for the function signature change.
In updating for the change, the enhancement of adding hostnames to
network namespaces has also been added to the Docker driver, whilst
the default Linux manager does not current implement it.
In a multi-task-group job, treat 0 canary groups as auto-promote.
This change fixes an edge case where Nomad requires a manual promotion,
if the job had any group with canary=0 and rest of groups having
auto_promote set.
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
Basically the same as #10896 but with the Affinity struct.
Since we use reflect.DeepEquals for job comparison, there is
risk of false positives for changes due to a job struct with
memoized vs non-memoized strings.
Closes#10897
Registration of Nomad volumes previously allowed for a single volume
capability (access mode + attachment mode pair). The recent `volume create`
command requires that we pass a list of requested capabilities, but the
existing workflow for claiming volumes and attaching them on the client
assumed that the volume's single capability was correct and unchanging.
Add `AccessMode` and `AttachmentMode` to `CSIVolumeClaim`, use these fields to
set the initial claim value, and add backwards compatibility logic to handle
the existing volumes that already have claims without these fields.
Start tracking a new MemoryMaxMB field that represents the maximum memory a task
may use in the client. This allows tasks to specify a memory reservation (to be
used by scheduler when placing the task) but use excess memory used on the
client if the client has any.
This commit adds the server tracking for the value, and ensures that allocations
AllocatedResource fields include the value.
node drain: use msgtype on txn so that events are emitted
wip: encoding extension to add Node.Drain field back to API responses
new approach for hiding Node.SecretID in the API, using `json` tag
documented this approach in the contributing guide
refactored the JSON handlers with extensions
modified event stream encoding to use the go-msgpack encoders with the extensions
Add a `PerAlloc` field to volume requests that directs the scheduler to test
feasibility for volumes with a source ID that includes the allocation index
suffix (ex. `[0]`), rather than the exact source ID.
Read the `PerAlloc` field when making the volume claim at the client to
determine if the allocation index suffix (ex. `[0]`) should be added to the
volume source ID.
