The advertise.rpc config option is not intuitive. At first glance you'd
assume it works like advertise.http or advertise.serf, but it does not.
The current behavior is working as intended, but the documentation is
very hard to parse and doesn't draw a clear picture of what the setting
actually does.
Closes https://github.com/hashicorp/nomad/issues/11075
The dynamic plugin registry assumes that plugins are singletons, which
matches the behavior of other Nomad plugins. But because dynamic
plugins like CSI are implemented by allocations, we need to handle the
possibility of multiple allocations for a given plugin type + ID, as
well as behaviors around interleaved allocation starts and stops.
Update the data structure for the dynamic registry so that more recent
allocations take over as the instance manager singleton, but we still
preserve the previous running allocations so that restores work
without racing.
Multiple allocations can run on a client for the same plugin, even if
only during updates. Provide each plugin task a unique path for the
control socket so that the tasks don't interfere with each other.
Nomad inherited protocol version numbering configuration from Consul and
Serf, but unlike those projects Nomad has never used it. Nomad's
`protocol_version` has always been `1`.
While the code is effectively unused and therefore poses no runtime
risks to leave, I felt like removing it was best because:
1. Nomad's RPC subsystem has been able to evolve extensively without
needing to increment the version number.
2. Nomad's HTTP API has evolved extensively without increment
`API{Major,Minor}Version`. If we want to version the HTTP API in the
future, I doubt this is the mechanism we would choose.
3. The presence of the `server.protocol_version` configuration
parameter is confusing since `server.raft_protocol` *is* an important
parameter for operators to consider. Even more confusing is that
there is a distinct Serf protocol version which is included in `nomad
server members` output under the heading `Protocol`. `raft_protocol`
is the *only* protocol version relevant to Nomad developers and
operators. The other protocol versions are either deadcode or have
never changed (Serf).
4. If we were to need to version the RPC, HTTP API, or Serf protocols, I
don't think these configuration parameters and variables are the best
choice. If we come to that point we should choose a versioning scheme
based on the use case and modern best practices -- not this 6+ year
old dead code.
These API endpoints now return results in chronological order. They
can return results in reverse chronological order by setting the
query parameter ascending=true.
- Eval.List
- Deployment.List
The examples for `nomad volume create` and `nomad volume register` are
not setting `mount_flags` using an array of strings.
This fixes the issue by changing the example to be `mount_flags =
["noatime"]`.
This PR exposes the following existing`consul-template` configuration options to Nomad jobspec authors in the `{job.group.task.template}` stanza.
- `wait`
It also exposes the following`consul-template` configuration to Nomad operators in the `{client.template}` stanza.
- `max_stale`
- `block_query_wait`
- `consul_retry`
- `vault_retry`
- `wait`
Finally, it adds the following new Nomad-specific configuration to the `{client.template}` stanza that allows Operators to set bounds on what `jobspec` authors configure.
- `wait_bounds`
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
Client endpoints such as `alloc exec` are enforced on the client if
the API client or CLI has "line of sight" to the client. This is
already in the Learn guide but having it in the ACL configuration docs
would be helpful.
* Fixed name of `nomad.scheduler.allocs.reschedule` metric
* Added new metrics to metrics reference documentation
* Expanded definitions of "waiting" metrics
* Changelog entry for #10236 and #10237
## Development Environment Changes
* Added stringer to build deps
## New HTTP APIs
* Added scheduler worker config API
* Added scheduler worker info API
## New Internals
* (Scheduler)Worker API refactor—Start(), Stop(), Pause(), Resume()
* Update shutdown to use context
* Add mutex for contended server data
- `workerLock` for the `workers` slice
- `workerConfigLock` for the `Server.Config.NumSchedulers` and
`Server.Config.EnabledSchedulers` values
## Other
* Adding docs for scheduler worker api
* Add changelog message
Co-authored-by: Derek Strickland <1111455+DerekStrickland@users.noreply.github.com>
When the scheduler picks a node for each evaluation, the
`LimitIterator` provides at most 2 eligible nodes for the
`MaxScoreIterator` to choose from. This keeps scheduling fast while
producing acceptable results because the results are binpacked.
Jobs with a `spread` block (or node affinity) remove this limit in
order to produce correct spread scoring. This means that every
allocation within a job with a `spread` block is evaluated against
_all_ eligible nodes. Operators of large clusters have reported that
jobs with `spread` blocks that are eligible on a large number of nodes
can take longer than the nack timeout to evaluate (60s). Typical
evaluations are processed in milliseconds.
In practice, it's not necessary to evaluate every eligible node for
every allocation on large clusters, because the `RandomIterator` at
the base of the scheduler stack produces enough variation in each pass
that the likelihood of an uneven spread is negligible. Note that
feasibility is checked before the limit, so this only impacts the
number of _eligible_ nodes available for scoring, not the total number
of nodes.
This changeset sets the iterator limit for "large" `spread` block and
node affinity jobs to be equal to the number of desired
allocations. This brings an example problematic job evaluation down
from ~3min to ~10s. The included tests ensure that we have acceptable
spread results across a variety of large cluster topologies.
* Mesh Gateway doc enhancements
1. I believe this line should be corrected to add mesh as one of the choices
2. I found that we are not setting this meta, and it is a required element for wan federation. I believe it would be helpful and potentially time saving to note that right here.
The `nomad operator raft` and `nomad operator snapshot state`
subcommands for inspecting on-disk raft state were hidden and
undocumented. Expose and document these so that advanced operators
have support for these tools.
Use the new filtering and pagination capabilities of the `Eval.List`
RPC to provide filtering and pagination at the command line.
Also includes note that `nomad eval status -json` is deprecated and
will be replaced with a single evaluation view in a future version of
Nomad.
Some operators use very long group/task `shutdown_delay` settings to
safely drain network connections to their workloads after service
deregistration. But during incident response, they may want to cause
that drain to be skipped so they can quickly shed load.
Provide a `-no-shutdown-delay` flag on the `nomad alloc stop` and
`nomad job stop` commands that bypasses the delay. This sets a new
desired transition state on the affected allocations that the
allocation/task runner will identify during pre-kill on the client.
Note (as documented here) that using this flag will almost always
result in failed inbound network connections for workloads as the
tasks will exit before clients receive updated service discovery
information and won't be gracefully drained.
API queries can request pagination using the `NextToken` and `PerPage`
fields of `QueryOptions`, when supported by the underlying API.
Add a `NextToken` field to the `structs.QueryMeta` so that we have a
common field across RPCs to tell the caller where to resume paging
from on their next API call. Include this field on the `api.QueryMeta`
as well so that it's available for future versions of List HTTP APIs
that wrap the response with `QueryMeta` rather than returning a simple
list of structs. In the meantime callers can get the `X-Nomad-NextToken`.
Add pagination to the `Eval.List` RPC by checking for pagination token
and page size in `QueryOptions`. This will allow resuming from the
last ID seen so long as the query parameters and the state store
itself are unchanged between requests.
Add filtering by job ID or evaluation status over the results we get
out of the state store.
Parse the query parameters of the `Eval.List` API into the arguments
expected for filtering in the RPC call.
This changeset adds more specific recommendations as to what metrics
to monitor, and what resources should be examined during incident
response.
It also renames the "Telemetry" section to "Monitoring Nomad" to
surface the material better and distinguish it from the "Metric
Reference".
Co-authored-by: Charlie Voiselle <464492+angrycub@users.noreply.github.com>
During incident response, operators may find that automated processes
elsewhere in the organization can be generating new workloads on Nomad
clusters that are unable to handle the workload. This changeset adds a
field to the `SchedulerConfiguration` API that causes all job
registration calls to be rejected unless the request has a management
ACL token.
Give ourselves some room for extension in the UI configuration block
by naming the field `ui_url`, which will let us have an `api_url`.
Fix the template path to ensure we're getting the right value from the
API.
This change modifies the Nomad job register and deregister RPCs to
accept an updated option set which includes eval priority. This
param is optional and override the use of the job priority to set
the eval priority.
In order to ensure all evaluations as a result of the request use
the same eval priority, the priority is shared to the
allocReconciler and deploymentWatcher. This creates a new
distinction between eval priority and job priority.
The Nomad agent HTTP API has been modified to allow setting the
eval priority on job update and delete. To keep consistency with
the current v1 API, job update accepts this as a payload param;
job delete accepts this as a query param.
Any user supplied value is validated within the agent HTTP handler
removing the need to pass invalid requests to the server.
The register and deregister opts functions now all for setting
the eval priority on requests.
The change includes a small change to the DeregisterOpts function
which handles nil opts. This brings the function inline with the
RegisterOpts.
The QEMU driver allows arbitrary command line options, but many of
these options give access to host resources that operators may not
want to expose such as devices. Add an optional allowlist to the
plugin configuration so that operators can limit the resources for
QEMU.
While it *is* clarified toward the bottom of this page, I've seen people
go to great lengths to configure tokens for clients anyway, so I think
it's worth noting on the parameter's docs as well.
Enhance the CLI in order to return the host network in two flavors
(default, verbose) of the `node status` command.
Fixes: #11223.
Signed-off-by: Alessandro De Blasis <alex@deblasis.net>
