Integration points for multiregion jobs to be registered in the enterprise
version of Nomad:
* hook in `Job.Register` for enterprise to send job to peer regions
* remove monitoring from `nomad job run` and `nomad job stop` for multiregion jobs
* scheduler/reconcile: set FollowupEvalID on lost stop_after_client_disconnect
* scheduler/reconcile: thread follupEvalIDs through to results.stop
* scheduler/reconcile: comment typo
* nomad/_test: correct arguments for plan.AppendStoppedAlloc
* scheduler/reconcile: avoid nil, cleanup handleDelayed(Lost|Reschedules)
* client/heartbeatstop: reversed time condition for startup grace
* scheduler/generic_sched: use `delayInstead` to avoid a loop
Without protecting the loop that creates followUpEvals, a delayed eval
is allowed to create an immediate subsequent delayed eval. For both
`stop_after_client_disconnect` and the `reschedule` block, a delayed
eval should always produce some immediate result (running or blocked)
and then only after the outcome of that eval produce a second delayed
eval.
* scheduler/reconcile: lostLater are different than delayedReschedules
Just slightly. `lostLater` allocs should be used to create batched
evaluations, but `handleDelayedReschedules` assumes that the
allocations are in the untainted set. When it creates the in-place
updates to those allocations at the end, it causes the allocation to
be treated as running over in the planner, which causes the initial
`stop_after_client_disconnect` evaluation to be retried by the worker.
Handle case where a snapshot is made before cluster metadata is created.
This fixes a bug where a server may have empty cluster metadata if it
created and installed a Raft snapshot before a new cluster metadata ID is
generated.
This case is very unlikely to arise. Most likely reason is when
upgrading from an old version slowly where servers may use snapshots
before all servers upgrade. This happened for a user with a log line
like:
```
2020-05-21T15:21:56.996Z [ERROR] nomad.fsm: ClusterSetMetadata failed: error=""set cluster metadata failed: refusing to set new cluster id, previous: , new: <<redacted>
```
* changes necessary to support oss licesning shims
revert nomad fmt changes
update test to work with enterprise changes
update tests to work with new ent enforcements
make check
update cas test to use scheduler algorithm
back out preemption changes
add comments
* remove unused method
Ensure that nomad steps down (and terminate leader goroutines) on
shutdown, when the server is the leader.
Without this change, `monitorLeadership` may handle `shutdownCh` event
and exit early before handling the raft `leaderCh` event and end up
leaking leadership goroutines.
If a token is scheduled for revocation expires before we revoke it,
ensure that it is marked as purged in raft and is only removed from
local vault state if the purge operation succeeds.
Prior to this change, we may remove the accessor from local state but
not purge it from Raft. This causes unnecessary and churn in the next
leadership elections (and until 0.11.2 result in indefinite retries).
Establishing leadership should be very fast and never make external API
calls.
This fixes a situation where there is a long backlog of Vault tokens to
be revoked on when leadership is gained. In such case, revoking the
tokens will significantly slow down leadership establishment and slow
down processing. Worse, the revocation call does not honor leadership
`stopCh` signals, so it will not stop when the leader loses leadership.
Following the new volumewatcher in #7794 and performance improvements
to it that landed afterwards, there's no particular reason we should
be threading claim releases through the GC eval rather than writing an
empty `CSIVolumeClaimRequest` with the mode set to
`CSIVolumeClaimRelease`, just as the GC evaluation would do.
Also, by batching up these raft messages, we can reduce the amount of
raft writes by 1 and cross-server RPCs by 1 per volume we release
claims on.
Some of the CSI RPC endpoints were missing validation that the ID or
the Volume definition was present. This could result in nonsense
`CSIVolume` structs being written to raft during registration. This
changeset corrects that bug and adds validation checks to present
nicer error messages to operators in some other cases.
Fixes#8000
When requesting a Service Identity token from Consul, use the TaskKind
of the Task to get at the service name associated with the task. In
the past using the TaskName worked because it was generated as a sidecar
task with a name that included the service. In the Native context, we
need to get at the service name in a more correct way, i.e. using the
TaskKind which is defined to include the service name.
Allow a `/v1/jobs?all_namespaces=true` to list all jobs across all
namespaces. The returned list is to contain a `Namespace` field
indicating the job namespace.
If ACL is enabled, the request token needs to be a management token or
have `namespace:list-jobs` capability on all existing namespaces.
The MVP for CSI in the 0.11.0 release of Nomad did not include support
for opaque volume parameters or volume context. This changeset adds
support for both.
This also moves args for ControllerValidateCapabilities into a struct.
The CSI plugin `ControllerValidateCapabilities` struct that we turn
into a CSI RPC is accumulating arguments, so moving it into a request
struct will reduce the churn of this internal API, make the plugin
code more readable, and make this method consistent with the other
plugin methods in that package.
This ensures that token revocation is idempotent and can handle when
tokens are revoked out of band.
Idempotency is important to handle some transient failures and retries.
Consider when a single token of a batch fails to be revoked, nomad would
retry revoking the entire batch; tokens already revoked should be
gracefully handled, otherwise, nomad may retry revoking the same
tokens forever.
* jobspec, api: add stop_after_client_disconnect
* nomad/state/state_store: error message typo
* structs: alloc methods to support stop_after_client_disconnect
1. a global AllocStates to track status changes with timestamps. We
need this to track the time at which the alloc became lost
originally.
2. ShouldClientStop() and WaitClientStop() to actually do the math
* scheduler/reconcile_util: delayByStopAfterClientDisconnect
* scheduler/reconcile: use delayByStopAfterClientDisconnect
* scheduler/util: updateNonTerminalAllocsToLost comments
This was setup to only update allocs to lost if the DesiredStatus had
already been set by the scheduler. It seems like the intention was to
update the status from any non-terminal state, and not all lost allocs
have been marked stop or evict by now
* scheduler/testing: AssertEvalStatus just use require
* scheduler/generic_sched: don't create a blocked eval if delayed
* scheduler/generic_sched_test: several scheduling cases
CSI plugins can require credentials for some publishing and
unpublishing workflow RPCs. Secrets are configured at the time of
volume registration, stored in the volume struct, and then passed
around as an opaque map by Nomad to the plugins.
When serializing structs with msgpack, only consider type tags of
`codec`.
Hashicorp/go-msgpack (based on ugorji/go) defaults to interpretting
`codec` tag if it's available, but falls to using `json` if `codec`
isn't present.
This behavior is surprising in cases where we want to serialize json
differently from msgpack, e.g. serializing `ConsulExposeConfig`.
When a CSI client RPC is given a specific node for a controller but
the lookup fails (because the node is gone or is an older version), we
fallthrough to select a node from all those available. This adds
logging to this case to aid in diagnostics.
The watcher goroutines will be automatically started if a volume has
updates, but when idle we shouldn't keep a goroutine running and
taking up memory.
This changeset implements a periodic garbage collection of CSI volumes
with missing allocations. This can happen in a scenario where a node
update fails partially and the allocation updates are written to raft
but the evaluations to GC the volumes are dropped. This feature will
cover this edge case and ensure that upgrades from 0.11.0 and 0.11.1
get any stray claims cleaned up.
TestClientEndpoint_CreateNodeEvals flakes a bit but its output is very
confusing, as `structs.Evaluations` overrides GoString.
Here, we emit the entire struct of the evaluation, and hopefully we'll
figure out the problem the next time it happens
Ensure that `""` Scheduler Algorithm gets explicitly set to binpack on
upgrades or on API handling when user misses the value.
The scheduler already treats `""` value as binpack. This PR merely
ensures that the operator API returns the effective value.
The `volumewatcher` has a 250ms batch window so claim updates will not
typically be large enough to risk exceeding the maximum raft message
size. But large jobs might have enough volume claims that this could
be a danger. Set a maximum batch size of 100 messages per
batch (roughly 33K), as a very conservative safety/robustness guard.
Co-authored-by: Chris Baker <1675087+cgbaker@users.noreply.github.com>
An operator could submit a scale request including a negative count
value. This negative value caused the Nomad server to panic. The
fix adds validation to the submitted count, returning an error to
the caller if it is negative.
* volumewatcher: remove redundant log fields
The constructor for `volumeWatcher` already sets a `logger.With` that
includes the volume ID and namespace fields. Remove them from the
various trace logs.
* volumewatcher: advance state for controller already released
One way of bypassing client RPCs in testing is to set a claim status
to controller-detached, but this results in an incorrect claim state
when we checkpoint.
This changeset implements a periodic garbage collection of unused CSI
plugins. Plugins are self-cleaning when the last allocation for a
plugin is stopped, but this feature will cover any missing edge cases
and ensure that upgrades from 0.11.0 and 0.11.1 get any stray plugins
cleaned up.
In this changeset:
* If a Nomad client node is running both a controller and a node
plugin (which is a common case), then if only the controller or the
node is removed, the plugin was not being updated with the correct
counts.
* The existing test for plugin cleanup didn't go back to the state
store, which normally is ok but is complicated in this case by
denormalization which changes the behavior. This commit makes the
test more comprehensive.
* Set "controller required" when plugin has `PUBLISH_READONLY`. All
known controllers that support `PUBLISH_READONLY` also support
`PUBLISH_UNPUBLISH_VOLUME` but we shouldn't assume this.
* Only create plugins when the allocs for those plugins are
healthy. If we allow a plugin to be created for the first time when
the alloc is not healthy, then we'll recreate deleted plugins when
the job's allocs all get marked terminal.
* Terminal plugin alloc updates should cleanup the plugin. The client
fingerprint can't tell if the plugin is unhealthy intentionally (for
the case of updates or job stop). Allocations that are
server-terminal should delete themselves from the plugin and trigger
a plugin self-GC, the same as an unused node.
The nil-check here is left-over from an earlier approach that didn't
get merged. It doesn't do anything for us now as we can't ever pass it
`nil` and if we leave it in the `getVolume` call it guards will panic
anyways.
- track lastHeartbeat, the client local time of the last successful
heartbeat round trip
- track allocations with `stop_after_client_disconnect` configured
- trigger allocation destroy (which handles cleanup)
- restore heartbeat/killable allocs tracking when allocs are recovered from disk
- on client restart, stop those allocs after a grace period if the
servers are still partioned
We should only remove the `ReadAllocs`/`WriteAllocs` values for a
volume after the claim has entered the "ready to free"
state. The volume will eventually be released as expected. But
querying the volume API will show the volume is released before the
controller unpublish has finished and this can cause a race with
starting new jobs.
Test updates are to cover cases where we're dropping claims but not
running through the whole reaping process.
Tim Gross