Failed requests due to API client errors are to be marked as DEBUG.
The Error log level should be reserved to signal problems with the
cluster and are actionable for nomad system operators. Logs due to
misbehaving API clients don't represent a system level problem and seem
spurius to nomad maintainers at best. These log messages can also be
attack vectors for deniel of service attacks by filling servers disk
space with spurious log messages.
Pipe http server log to hclog, so that it uses the same logging format
as rest of nomad logs. Also, supports emitting them as json logs, when
json formatting is set.
The http server logs are emitted as Trace level, as they are typically
repsent HTTP client errors (e.g. failed tls handshakes, invalid headers,
etc).
Though, Panic logs represent server errors and are relayed as Error
level.
Shutdown http server last, after nomad client/server components
terminate.
Before this change, if the agent is taking an unexpectedly long time to
shutdown, the operator cannot query the http server directly: they
cannot access agent specific http endpoints and need to query another
agent about the troublesome agent.
Unexpectedly long shutdown can happen in normal cases, e.g. a client
might hung is if one of the allocs it is running has a long
shutdown_delay.
Here, we switch to ensuring that the http server is shutdown last.
I believe this doesn't require extra care in agent shutting down logic
while operators may be able to submit write http requests. We already
need to cope with operators submiting these http requests to another
agent or by servers updating the client allocations.
Some tests assert on numbers on numbers of servers, e.g.
TestHTTP_AgentSetServers and TestHTTP_AgentListServers_ACL . Though, in dev and
test modes, the agent starts with servers having duplicate entries for
advertised and normalized RPC values, then settles with one unique value after
Raft/Serf re-sets servers with one single unique value.
This leads to flakiness, as the test will fail if assertion runs before Serf
update takes effect.
Here, we update the inital dev handling so it only adds a unique value if the
advertised and normalized values are the same.
Sample log lines illustrating the problem:
```
=== CONT TestHTTP_AgentSetServers
TestHTTP_AgentSetServers: testlog.go:34: 2020-04-06T21:47:51.016Z [INFO] nomad.raft: initial configuration: index=1 servers="[{Suffrage:Voter ID:127.0.0.1:9008 Address:127.0.0.1:9008}]"
TestHTTP_AgentSetServers: testlog.go:34: 2020-04-06T21:47:51.016Z [INFO] nomad: serf: EventMemberJoin: TestHTTP_AgentSetServers.global 127.0.0.1
TestHTTP_AgentSetServers: testlog.go:34: 2020-04-06T21:47:51.035Z [DEBUG] client.server_mgr: new server list: new_servers=[127.0.0.1:9008, 127.0.0.1:9008] old_servers=[]
...
TestHTTP_AgentSetServers: agent_endpoint_test.go:759:
Error Trace: agent_endpoint_test.go:759
http_test.go:1089
agent_endpoint_test.go:705
Error: "[127.0.0.1:9008 127.0.0.1:9008]" should have 1 item(s), but has 2
Test: TestHTTP_AgentSetServers
```
The javascript Websocket API doesn't support setting custom headers
(e.g. `X-Nomad-Token`). This change adds support for having an
authentication handshake message: clients can set `ws_handshake` URL
query parameter to true and send a single handshake message with auth
token first before any other mssage.
This is a backward compatible change: it does not affect nomad CLI path, as it
doesn't set `ws_handshake` parameter.
In some refactoring, a bug was introduced where if the connect.proxy
stanza in a submitted job was nil, the default proxy configuration
would not be initialized with default values, effectively breaking
Connect.
connect {
sidecar_service {} # should work
}
In contrast, by setting an empty proxy stanza, the config values would
be inserted correctly.
connect {
sidecar_service {
proxy {} # workaround
}
}
This commit restores the original behavior, where having a proxy
stanza present is not required.
The unit test for this case has also been corrected.
Part of #6120
Building on the support for enabling connect proxy paths in #7323, this change
adds the ability to configure the 'service.check.expose' flag on group-level
service check definitions for services that are connect-enabled. This is a slight
deviation from the "magic" that Consul provides. With Consul, the 'expose' flag
exists on the connect.proxy stanza, which will then auto-generate expose paths
for every HTTP and gRPC service check associated with that connect-enabled
service.
A first attempt at providing similar magic for Nomad's Consul Connect integration
followed that pattern exactly, as seen in #7396. However, on reviewing the PR
we realized having the `expose` flag on the proxy stanza inseperably ties together
the automatic path generation with every HTTP/gRPC defined on the service. This
makes sense in Consul's context, because a service definition is reasonably
associated with a single "task". With Nomad's group level service definitions
however, there is a reasonable expectation that a service definition is more
abstractly representative of multiple services within the task group. In this
case, one would want to define checks of that service which concretely make HTTP
or gRPC requests to different underlying tasks. Such a model is not possible
with the course `proxy.expose` flag.
Instead, we now have the flag made available within the check definitions themselves.
By making the expose feature resolute to each check, it is possible to have
some HTTP/gRPC checks which make use of the envoy exposed paths, as well as
some HTTP/gRPC checks which make use of some orthongonal port-mapping to do
checks on some other task (or even some other bound port of the same task)
within the task group.
Given this example,
group "server-group" {
network {
mode = "bridge"
port "forchecks" {
to = -1
}
}
service {
name = "myserver"
port = 2000
connect {
sidecar_service {
}
}
check {
name = "mycheck-myserver"
type = "http"
port = "forchecks"
interval = "3s"
timeout = "2s"
method = "GET"
path = "/classic/responder/health"
expose = true
}
}
}
Nomad will automatically inject (via job endpoint mutator) the
extrapolated expose path configuration, i.e.
expose {
path {
path = "/classic/responder/health"
protocol = "http"
local_path_port = 2000
listener_port = "forchecks"
}
}
Documentation is coming in #7440 (needs updating, doing next)
Modifications to the `countdash` examples in https://github.com/hashicorp/demo-consul-101/pull/6
which will make the examples in the documentation actually runnable.
Will add some e2e tests based on the above when it becomes available.
Enable configuration of HTTP and gRPC endpoints which should be exposed by
the Connect sidecar proxy. This changeset is the first "non-magical" pass
that lays the groundwork for enabling Consul service checks for tasks
running in a network namespace because they are Connect-enabled. The changes
here provide for full configuration of the
connect {
sidecar_service {
proxy {
expose {
paths = [{
path = <exposed endpoint>
protocol = <http or grpc>
local_path_port = <local endpoint port>
listener_port = <inbound mesh port>
}, ... ]
}
}
}
stanza. Everything from `expose` and below is new, and partially implements
the precedent set by Consul:
https://www.consul.io/docs/connect/registration/service-registration.html#expose-paths-configuration-reference
Combined with a task-group level network port-mapping in the form:
port "exposeExample" { to = -1 }
it is now possible to "punch a hole" through the network namespace
to a specific HTTP or gRPC path, with the anticipated use case of creating
Consul checks on Connect enabled services.
A future PR may introduce more automagic behavior, where we can do things like
1) auto-fill the 'expose.path.local_path_port' with the default value of the
'service.port' value for task-group level connect-enabled services.
2) automatically generate a port-mapping
3) enable an 'expose.checks' flag which automatically creates exposed endpoints
for every compatible consul service check (http/grpc checks on connect
enabled services).
* nomad/structs/structs: new NodeEventSubsystemCSI
* client/client: pass triggerNodeEvent in the CSIConfig
* client/pluginmanager/csimanager/instance: add eventer to instanceManager
* client/pluginmanager/csimanager/manager: pass triggerNodeEvent
* client/pluginmanager/csimanager/volume: node event on [un]mount
* nomad/structs/structs: use storage, not CSI
* client/pluginmanager/csimanager/volume: use storage, not CSI
* client/pluginmanager/csimanager/volume_test: eventer
* client/pluginmanager/csimanager/volume: event on error
* client/pluginmanager/csimanager/volume_test: check event on error
* command/node_status: remove an extra space in event detail format
* client/pluginmanager/csimanager/volume: use snake_case for details
* client/pluginmanager/csimanager/volume_test: snake_case details
* nomad/structs/csi: delete just one plugin type from a node
* nomad/structs/csi: add DeleteAlloc
* nomad/state/state_store: add deleteJobFromPlugin
* nomad/state/state_store: use DeleteAlloc not DeleteNodeType
* move CreateTestCSIPlugin to state to avoid an import cycle
* nomad/state/state_store_test: delete a plugin by deleting its jobs
* nomad/*_test: move CreateTestCSIPlugin to state
* nomad/state/state_store: update one plugin per transaction
* command/plugin_status_test: move CreateTestCSIPlugin
* nomad: csi: handle nils CSIPlugin methods, clarity
- tg.Count defaults to tg.Scaling.Min if present (falls back on previous default of 1 if Scaling is absent)
- Validate() enforces tg.Scaling.Min <= tg.Count <= tg.Scaling.Max
modification in ApiScalingPolicyToStructs, api.TaskGroup.Validate so that defaults are handled for TaskGroup.Count and
Display task lifecycle info in `nomad alloc status <alloc_id>` output.
I chose to embed it in the Task header and only add it for tasks with
lifecycle info.
Also, I chose to order the tasks in the following order:
1. prestart non-sidecar tasks
2. prestart sidecar tasks
3. main tasks
The tasks are sorted lexicographically within each tier.
Sample output:
```
$ nomad alloc status 6ec0eb52
ID = 6ec0eb52-e6c8-665c-169c-113d6081309b
Eval ID = fb0caa98
Name = lifecycle.cache[0]
[...]
Task "init" (prestart) is "dead"
Task Resources
CPU Memory Disk Addresses
0/500 MHz 0 B/256 MiB 300 MiB
[...]
Task "some-sidecar" (prestart sidecar) is "running"
Task Resources
CPU Memory Disk Addresses
0/500 MHz 68 KiB/256 MiB 300 MiB
[...]
Task "redis" is "running"
Task Resources
CPU Memory Disk Addresses
10/500 MHz 984 KiB/256 MiB 300 MiB
[...]
```
Add mount_options to both the volume definition on registration and to the volume block in the group where the volume is requested. If both are specified, the options provided in the request replace the options defined in the volume. They get passed to the NodePublishVolume, which causes the node plugin to actually mount the volume on the host.
Individual tasks just mount bind into the host mounted volume (unchanged behavior). An operator can mount the same volume with different options by specifying it twice in the group context.
closes#7007
* nomad/structs/volumes: add MountOptions to volume request
* jobspec/test-fixtures/basic.hcl: add mount_options to volume block
* jobspec/parse_test: add expected MountOptions
* api/tasks: add mount_options
* jobspec/parse_group: use hcl decode not mapstructure, mount_options
* client/allocrunner/csi_hook: pass MountOptions through
client/allocrunner/csi_hook: add a VolumeMountOptions
client/allocrunner/csi_hook: drop Options
client/allocrunner/csi_hook: use the structs options
* client/pluginmanager/csimanager/interface: UsageOptions.MountOptions
* client/pluginmanager/csimanager/volume: pass MountOptions in capabilities
* plugins/csi/plugin: remove todo 7007 comment
* nomad/structs/csi: MountOptions
* api/csi: add options to the api for parsing, match structs
* plugins/csi/plugin: move VolumeMountOptions to structs
* api/csi: use specific type for mount_options
* client/allocrunner/csi_hook: merge MountOptions here
* rename CSIOptions to CSIMountOptions
* client/allocrunner/csi_hook
* client/pluginmanager/csimanager/volume
* nomad/structs/csi
* plugins/csi/fake/client: add PrevVolumeCapability
* plugins/csi/plugin
* client/pluginmanager/csimanager/volume_test: remove debugging
* client/pluginmanager/csimanager/volume: fix odd merging logic
* api: rename CSIOptions -> CSIMountOptions
* nomad/csi_endpoint: remove a 7007 comment
* command/alloc_status: show mount options in the volume list
* nomad/structs/csi: include MountOptions in the volume stub
* api/csi: add MountOptions to stub
* command/volume_status_csi: clean up csiVolMountOption, add it
* command/alloc_status: csiVolMountOption lives in volume_csi_status
* command/node_status: display mount flags
* nomad/structs/volumes: npe
* plugins/csi/plugin: npe in ToCSIRepresentation
* jobspec/parse_test: expand volume parse test cases
* command/agent/job_endpoint: ApiTgToStructsTG needs MountOptions
* command/volume_status_csi: copy paste error
* jobspec/test-fixtures/basic: hclfmt
* command/volume_status_csi: clean up csiVolMountOption
* nomad/state/schema: use the namespace compound index
* scheduler/scheduler: CSIVolumeByID interface signature namespace
* scheduler/stack: SetJob on CSIVolumeChecker to capture namespace
* scheduler/feasible: pass the captured namespace to CSIVolumeByID
* nomad/state/state_store: use namespace in csi_volume index
* nomad/fsm: pass namespace to CSIVolumeDeregister & Claim
* nomad/core_sched: pass the namespace in volumeClaimReap
* nomad/node_endpoint_test: namespaces in Claim testing
* nomad/csi_endpoint: pass RequestNamespace to state.*
* nomad/csi_endpoint_test: appropriately failed test
* command/alloc_status_test: appropriately failed test
* node_endpoint_test: avoid notTheNamespace for the job
* scheduler/feasible_test: call SetJob to capture the namespace
* nomad/csi_endpoint: ACL check the req namespace, query by namespace
* nomad/state/state_store: remove deregister namespace check
* nomad/state/state_store: remove unused CSIVolumes
* scheduler/feasible: CSIVolumeChecker SetJob -> SetNamespace
* nomad/csi_endpoint: ACL check
* nomad/state/state_store_test: remove call to state.CSIVolumes
* nomad/core_sched_test: job namespace match so claim gc works
* command/agent/csi_endpoint: support type filter in volumes & plugins
* command/agent/http: use /v1/volume/csi & /v1/plugin/csi
* api/csi: use /v1/volume/csi & /v1/plugin/csi
* api/nodes: use /v1/volume/csi & /v1/plugin/csi
* api/nodes: not /volumes/csi, just /volumes
* command/agent/csi_endpoint: fix ot parameter parsing
* api/allocations: GetTaskGroup finds the taskgroup struct
* command/node_status: display CSI volume names
* nomad/state/state_store: new CSIVolumesByNodeID
* nomad/state/iterator: new SliceIterator type implements memdb.ResultIterator
* nomad/csi_endpoint: deal with a slice of volumes
* nomad/state/state_store: CSIVolumesByNodeID return a SliceIterator
* nomad/structs/csi: CSIVolumeListRequest takes a NodeID
* nomad/csi_endpoint: use the return iterator
* command/agent/csi_endpoint: parse query params for CSIVolumes.List
* api/nodes: new CSIVolumes to list volumes by node
* command/node_status: use the new list endpoint to print volumes
* nomad/state/state_store: error messages consider the operator
* command/node_status: include the Provider
Derive a provider name and version for plugins (and the volumes that
use them) from the CSI identity API `GetPluginInfo`. Expose the vendor
name as `Provider` in the API and CLI commands.
* command/csi: csi, csi_plugin, csi_volume
* helper/funcs: move ExtraKeys from parse_config to UnusedKeys
* command/agent/config_parse: use helper.UnusedKeys
* api/csi: annotate CSIVolumes with hcl fields
* command/csi_plugin: add Synopsis
* command/csi_volume_register: use hcl.Decode style parsing
* command/csi_volume_list
* command/csi_volume_status: list format, cleanup
* command/csi_plugin_list
* command/csi_plugin_status
* command/csi_volume_deregister
* command/csi_volume: add Synopsis
* api/contexts/contexts: add csi search contexts to the constants
* command/commands: register csi commands
* api/csi: fix struct tag for linter
* command/csi_plugin_list: unused struct vars
* command/csi_plugin_status: unused struct vars
* command/csi_volume_list: unused struct vars
* api/csi: add allocs to CSIPlugin
* command/csi_plugin_status: format the allocs
* api/allocations: copy Allocation.Stub in from structs
* nomad/client_rpc: add some error context with Errorf
* api/csi: collapse read & write alloc maps to a stub list
* command/csi_volume_status: cleanup allocation display
* command/csi_volume_list: use Schedulable instead of Healthy
* command/csi_volume_status: use Schedulable instead of Healthy
* command/csi_volume_list: sprintf string
* command/csi: delete csi.go, csi_plugin.go
* command/plugin: refactor csi components to sub-command plugin status
* command/plugin: remove csi
* command/plugin_status: remove csi
* command/volume: remove csi
* command/volume_status: split out csi specific
* helper/funcs: add RemoveEqualFold
* command/agent/config_parse: use helper.RemoveEqualFold
* api/csi: do ,unusedKeys right
* command/volume: refactor csi components to `nomad volume`
* command/volume_register: split out csi specific
* command/commands: use the new top level commands
* command/volume_deregister: hardwired type csi for now
* command/volume_status: csiFormatVolumes rescued from volume_list
* command/plugin_status: avoid a panic on no args
* command/volume_status: avoid a panic on no args
* command/plugin_status: predictVolumeType
* command/volume_status: predictVolumeType
* nomad/csi_endpoint_test: move CreateTestPlugin to testing
* command/plugin_status_test: use CreateTestCSIPlugin
* nomad/structs/structs: add CSIPlugins and CSIVolumes search consts
* nomad/state/state_store: add CSIPlugins and CSIVolumesByIDPrefix
* nomad/search_endpoint: add CSIPlugins and CSIVolumes
* command/plugin_status: move the header to the csi specific
* command/volume_status: move the header to the csi specific
* nomad/state/state_store: CSIPluginByID prefix
* command/status: rename the search context to just Plugins/Volumes
* command/plugin,volume_status: test return ids now
* command/status: rename the search context to just Plugins/Volumes
* command/plugin_status: support -json and -t
* command/volume_status: support -json and -t
* command/plugin_status_csi: comments
* command/*_status: clean up text
* api/csi: fix stale comments
* command/volume: make deregister sound less fearsome
* command/plugin_status: set the id length
* command/plugin_status_csi: more compact plugin health
* command/volume: better error message, comment
Adds a stanza for both Host Volumes and CSI Volumes to the the CLI
output for `nomad alloc status`. Mostly relies on information already
in the API structs, but in the case where there are CSI Volumes we
need to make extra API calls to get the volume status. To reduce
overhead, these extra calls are hidden behind the `-verbose` flag.
Previously when deserializing volumes we skipped over volumes that were
not of type `host`. This commit ensures that we parse both host and csi
volumes correctly.
This commit introduces two new fields to the basic output of `nomad
node status <node-id>`.
1) "CSI Controllers", which displays the names of registered controller
plugins.
2) "CSI Drivers", which displays the names of registered CSI Node
plugins.
However, it does not implement support for verbose output, such as
including health status or other fingerprinted data.
This changeset implements the initial registration and fingerprinting
of CSI Plugins as part of #5378. At a high level, it introduces the
following:
* A `csi_plugin` stanza as part of a Nomad task configuration, to
allow a task to expose that it is a plugin.
* A new task runner hook: `csi_plugin_supervisor`. This hook does two
things. When the `csi_plugin` stanza is detected, it will
automatically configure the plugin task to receive bidirectional
mounts to the CSI intermediary directory. At runtime, it will then
perform an initial heartbeat of the plugin and handle submitting it to
the new `dynamicplugins.Registry` for further use by the client, and
then run a lightweight heartbeat loop that will emit task events
when health changes.
* The `dynamicplugins.Registry` for handling plugins that run
as Nomad tasks, in contrast to the existing catalog that requires
`go-plugin` type plugins and to know the plugin configuration in
advance.
* The `csimanager` which fingerprints CSI plugins, in a similar way to
`drivermanager` and `devicemanager`. It currently only fingerprints
the NodeID from the plugin, and assumes that all plugins are
monolithic.
Missing features
* We do not use the live updates of the `dynamicplugin` registry in
the `csimanager` yet.
* We do not deregister the plugins from the client when they shutdown
yet, they just become indefinitely marked as unhealthy. This is
deliberate until we figure out how we should manage deploying new
versions of plugins/transitioning them.
allow oss to parse sink duration
clean up audit sink parsing
ent eventer config reload
fix typo
SetEnabled to eventer interface
client acl test
rm dead code
fix failing test
This change updates tests to honor `BootstrapExpect` exclusively when
forming test clusters and removes test only knobs, e.g.
`config.DevDisableBootstrap`.
Background:
Test cluster creation is fragile. Test servers don't follow the
BootstapExpected route like production clusters. Instead they start as
single node clusters and then get rejoin and may risk causing brain
split or other test flakiness.
The test framework expose few knobs to control those (e.g.
`config.DevDisableBootstrap` and `config.Bootstrap`) that control
whether a server should bootstrap the cluster. These flags are
confusing and it's unclear when to use: their usage in multi-node
cluster isn't properly documented. Furthermore, they have some bad
side-effects as they don't control Raft library: If
`config.DevDisableBootstrap` is true, the test server may not
immediately attempt to bootstrap a cluster, but after an election
timeout (~50ms), Raft may force a leadership election and win it (with
only one vote) and cause a split brain.
The knobs are also confusing as Bootstrap is an overloaded term. In
BootstrapExpect, we refer to bootstrapping the cluster only after N
servers are connected. But in tests and the knobs above, it refers to
whether the server is a single node cluster and shouldn't wait for any
other server.
Changes:
This commit makes two changes:
First, it relies on `BootstrapExpected` instead of `Bootstrap` and/or
`DevMode` flags. This change is relatively trivial.
Introduce a `Bootstrapped` flag to track if the cluster is bootstrapped.
This allows us to keep `BootstrapExpected` immutable. Previously, the
flag was a config value but it gets set to 0 after cluster bootstrap
completes.
Nomad agent may silently ignore cni_path and bridge setting, when it
merges configs from multiple files (or against default/dev config).
This PR ensures that the values are merged properly.
Fix a bug where consul service definitions would not be updated if changes
were made to the service in the Nomad job. Currently this only fixes the
bug for cases where the fix is a matter of updating consul agent's service
registration. There is related bug where destructive changes are required
(see #6877) which will be fixed in another PR.
The enable_tag_override configuration setting for the parent service is
applied to the sidecar service.
Fixes#6459
Consul CLI uses CONSUL_HTTP_TOKEN, so Nomad should use the same.
Note that consul-template uses CONSUL_TOKEN, which Nomad also uses,
so be careful to preserve any reference to that in the consul-template
context.
Consul provides a feature of Service Definitions where the tags
associated with a service can be modified through the Catalog API,
overriding the value(s) configured in the agent's service configuration.
To enable this feature, the flag enable_tag_override must be configured
in the service definition.
Previously, Nomad did not allow configuring this flag, and thus the default
value of false was used. Now, it is configurable.
Because Nomad itself acts as a state machine around the the service definitions
of the tasks it manages, it's worth describing what happens when this feature
is enabled and why.
Consider the basic case where there is no Nomad, and your service is provided
to consul as a boring JSON file. The ultimate source of truth for the definition
of that service is the file, and is stored in the agent. Later, Consul performs
"anti-entropy" which synchronizes the Catalog (stored only the leaders). Then
with enable_tag_override=true, the tags field is available for "external"
modification through the Catalog API (rather than directly configuring the
service definition file, or using the Agent API). The important observation
is that if the service definition ever changes (i.e. the file is changed &
config reloaded OR the Agent API is used to modify the service), those
"external" tag values are thrown away, and the new service definition is
once again the source of truth.
In the Nomad case, Nomad itself is the source of truth over the Agent in
the same way the JSON file was the source of truth in the example above.
That means any time Nomad sets a new service definition, any externally
configured tags are going to be replaced. When does this happen? Only on
major lifecycle events, for example when a task is modified because of an
updated job spec from the 'nomad job run <existing>' command. Otherwise,
Nomad's periodic re-sync's with Consul will now no longer try to restore
the externally modified tag values (as long as enable_tag_override=true).
Fixes#2057
Test set Agent.client=nil which prevented the client from being
shutdown. This leaked goroutines and could cause panics due to the
leaked client goroutines logging after their parent test had finished.
Removed ACLs from the server test because I couldn't get it to work with
the test agent, and it tested very little.
Fixes a panic when accessing a.agent.Server() when agent is a client
instead. This pr removes a redundant ACL check since ACLs are validated
at the RPC layer. It also nil checks the agent server and uses Client()
when appropriate.
Nomad jobs may be configured with a TaskGroup which contains a Service
definition that is Consul Connect enabled. These service definitions end
up establishing a Consul Connect Proxy Task (e.g. envoy, by default). In
the case where Consul ACLs are enabled, a Service Identity token is required
for these tasks to run & connect, etc. This changeset enables the Nomad Server
to recieve RPC requests for the derivation of SI tokens on behalf of instances
of Consul Connect using Tasks. Those tokens are then relayed back to the
requesting Client, which then injects the tokens in the secrets directory of
the Task.
This change provides an initial pass at setting up the configuration necessary to
enable use of Connect with Consul ACLs. Operators will be able to pass in a Consul
Token through `-consul-token` or `$CONSUL_TOKEN` in the `job run` and `job revert`
commands (similar to Vault tokens).
These values are not actually used yet in this changeset.
Introduce limits to prevent unauthorized users from exhausting all
ephemeral ports on agents:
* `{https,rpc}_handshake_timeout`
* `{http,rpc}_max_conns_per_client`
The handshake timeout closes connections that have not completed the TLS
handshake by the deadline (5s by default). For RPC connections this
timeout also separately applies to first byte being read so RPC
connections with TLS enabled have `rpc_handshake_time * 2` as their
deadline.
The connection limit per client prevents a single remote TCP peer from
exhausting all ephemeral ports. The default is 100, but can be lowered
to a minimum of 26. Since streaming RPC connections create a new TCP
connection (until MultiplexV2 is used), 20 connections are reserved for
Raft and non-streaming RPCs to prevent connection exhaustion due to
streaming RPCs.
All limits are configurable and may be disabled by setting them to `0`.
This also includes a fix that closes connections that attempt to create
TLS RPC connections recursively. While only users with valid mTLS
certificates could perform such an operation, it was added as a
safeguard to prevent programming errors before they could cause resource
exhaustion.
The system command includes gc and reconcile-summaries subcommands
which covers all currently available system API calls. The help
information is largely pulled from the current Nomad website API
documentation.
Passes in agent enable_debug config to nomad server and client configs.
This allows for rpc endpoints to have more granular control if they
should be enabled or not in combination with ACLs.
enable debug on client test
copy struct values
ensure groupserviceHook implements RunnerPreKillhook
run deregister first
test that shutdown times are delayed
move magic number into variable
Fixes a bug where if a command flag parsing errors, the resulting error
and help usage messages get interleaved in unexpected and non-user
friendly way.
The reason is that we have flag parsing library effectively writes to
ui.Error in a goroutine. This is problematic: first, we lose the sequencing between help
usage and error message; second, cli.Ui methods are not concurrent safe.
Here, we introduce a custom error writer that buffers result and calls
ui.Error() in the write method and in the same goroutine.
For context, we need to wrap ui.Error because it's line-oriented, while
flags library expects a io.Writer which is bytes oriented.
Currently `nomad monitor -node-id` will panic when a node-id does not
match any nodes, as there is no empty result bounds checking. Here we
return an error to the user when no nodes are found.
Copy the updated version of freeport (sdk/freeport), and tweak it for use
in Nomad tests. This means staying below port 10000 to avoid conflicts with
the lib/freeport that is still transitively used by the old version of
consul that we vendor. Also provide implementations to find ephemeral ports
of macOS and Windows environments.
Ports acquired through freeport are supposed to be returned to freeport,
which this change now also introduces. Many tests are modified to include
calls to a cleanup function for Server objects.
This should help quite a bit with some flakey tests, but not all of them.
Our port problems will not go away completely until we upgrade our vendor
version of consul. With Go modules, we'll probably do a 'replace' to swap
out other copies of freeport with the one now in 'nomad/helper/freeport'.
The test asserts that alloc counts get reported accurately in metrics by
inspecting the metrics endpoint directly. Sadly, the metrics as
collected by `armon/go-metrics` seem to be stateful and may contain info
from other tests.
This means that the test can fail depending on the order of returned
metrics.
Inspecting the metrics output of one failing run, you can see the
duplicate guage entries but for different node_ids:
```
{
"Name": "service-name.default-0a3ba4b6-2109-485e-be74-6864228aed3d.client.allocations.terminal",
"Value": 10,
"Labels": {
"datacenter": "dc1",
"node_class": "none",
"node_id": "67402bf4-00f3-bd8d-9fa8-f4d1924a892a"
}
},
{
"Name": "service-name.default-0a3ba4b6-2109-485e-be74-6864228aed3d.client.allocations.terminal",
"Value": 0,
"Labels": {
"datacenter": "dc1",
"node_class": "none",
"node_id": "a2945b48-7e66-68e2-c922-49b20dd4e20c"
}
},
```
Noticed that ACL endpoints return 500 status code for user errors. This
is confusing and can lead to false monitoring alerts.
Here, I introduce a concept of RPCCoded errors to be returned by RPC
that signal a code in addition to error message. Codes for now match
HTTP codes to ease reasoning.
```
$ nomad acl bootstrap
Error bootstrapping: Unexpected response code: 500 (ACL bootstrap already done (reset index: 9))
$ nomad acl bootstrap
Error bootstrapping: Unexpected response code: 400 (ACL bootstrap already done (reset index: 9))
```
* client: improve group service stanza interpolation and check_restart support
Interpolation can now be done on group service stanzas. Note that some task runtime specific information
that was previously available when the service was registered poststart of a task is no longer available.
The check_restart stanza for checks defined on group services will now properly restart the allocation upon
check failures if configured.
handle the case where we request a server-id which is this current server
update docs, error on node and server id params
more accurate names for tests
use shared no leader err, formatting
rm bad comment
remove redundant variable
Drew Bailey